[1/2] tpm, tpm_tis: Handle interrupt storm

Message ID 20230522143105.8617-1-LinoSanfilippo@gmx.de
State New
Headers
Series [1/2] tpm, tpm_tis: Handle interrupt storm |

Commit Message

Lino Sanfilippo May 22, 2023, 2:31 p.m. UTC
  From: Lino Sanfilippo <l.sanfilippo@kunbus.com>

Commit e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test") enabled
interrupts instead of polling on all capable TPMs. Unfortunately, on some
products the interrupt line is either never asserted or never deasserted.

The former causes interrupt timeouts and is detected by
tpm_tis_core_init(). The latter results in interrupt storms.

Recent reports concern the Lenovo ThinkStation P360 Tiny, Lenovo ThinkPad
L490 and Inspur NF5180M6:

https://lore.kernel.org/linux-integrity/20230511005403.24689-1-jsnitsel@redhat.com/
https://lore.kernel.org/linux-integrity/d80b180a569a9f068d3a2614f062cfa3a78af5a6.camel@kernel.org/

The current approach to avoid those storms is to disable interrupts by
adding a DMI quirk for the concerned device.

However this is a maintenance burden in the long run, so use a generic
approach:

Detect an interrupt storm by counting the number of unhandled interrupts
within a 10 ms time interval. In case that more than 1000 were unhandled
deactivate interrupts, deregister the handler and fall back to polling.

This equals the implementation that handles interrupt storms in
note_interrupt() by means of timestamps and counters in struct irq_desc.
However the function to access this structure is private so the logic has
to be reimplemented in the TPM TIS core.

Since handler deregistration would deadlock from within the interrupt
routine trigger a worker thread that executes the unregistration.

Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
---
 drivers/char/tpm/tpm_tis_core.c | 71 +++++++++++++++++++++++++++++++--
 drivers/char/tpm/tpm_tis_core.h |  6 +++
 2 files changed, 74 insertions(+), 3 deletions(-)


base-commit: 44c026a73be8038f03dbdeef028b642880cf1511
  

Comments

Jerry Snitselaar May 22, 2023, 10:44 p.m. UTC | #1
On Mon, May 22, 2023 at 04:31:04PM +0200, Lino Sanfilippo wrote:
> From: Lino Sanfilippo <l.sanfilippo@kunbus.com>
> 
> Commit e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test") enabled
> interrupts instead of polling on all capable TPMs. Unfortunately, on some
> products the interrupt line is either never asserted or never deasserted.
> 
> The former causes interrupt timeouts and is detected by
> tpm_tis_core_init(). The latter results in interrupt storms.
> 
> Recent reports concern the Lenovo ThinkStation P360 Tiny, Lenovo ThinkPad
> L490 and Inspur NF5180M6:
> 
> https://lore.kernel.org/linux-integrity/20230511005403.24689-1-jsnitsel@redhat.com/
> https://lore.kernel.org/linux-integrity/d80b180a569a9f068d3a2614f062cfa3a78af5a6.camel@kernel.org/
> 
> The current approach to avoid those storms is to disable interrupts by
> adding a DMI quirk for the concerned device.
> 
> However this is a maintenance burden in the long run, so use a generic
> approach:
> 
> Detect an interrupt storm by counting the number of unhandled interrupts
> within a 10 ms time interval. In case that more than 1000 were unhandled
> deactivate interrupts, deregister the handler and fall back to polling.
> 
> This equals the implementation that handles interrupt storms in
> note_interrupt() by means of timestamps and counters in struct irq_desc.
> However the function to access this structure is private so the logic has
> to be reimplemented in the TPM TIS core.
> 
> Since handler deregistration would deadlock from within the interrupt
> routine trigger a worker thread that executes the unregistration.
> 
> Suggested-by: Lukas Wunner <lukas@wunner.de>
> Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>

Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>

> ---
>  drivers/char/tpm/tpm_tis_core.c | 71 +++++++++++++++++++++++++++++++--
>  drivers/char/tpm/tpm_tis_core.h |  6 +++
>  2 files changed, 74 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
> index 558144fa707a..458ebf8c2f16 100644
> --- a/drivers/char/tpm/tpm_tis_core.c
> +++ b/drivers/char/tpm/tpm_tis_core.c
> @@ -752,6 +752,55 @@ static bool tpm_tis_req_canceled(struct tpm_chip *chip, u8 status)
>  	return status == TPM_STS_COMMAND_READY;
>  }
>  
> +static void tpm_tis_handle_irq_storm(struct tpm_chip *chip)
> +{
> +	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
> +	int intmask = 0;
> +
> +	dev_err(&chip->dev, HW_ERR
> +		"TPM interrupt storm detected, polling instead\n");
> +
> +	tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
> +
> +	intmask &= ~TPM_GLOBAL_INT_ENABLE;
> +
> +	tpm_tis_request_locality(chip, 0);
> +	tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
> +	tpm_tis_relinquish_locality(chip, 0);
> +
> +	chip->flags &= ~TPM_CHIP_FLAG_IRQ;
> +
> +	/*
> +	 * We must not call devm_free_irq() from within the interrupt handler,
> +	 * since this function waits for running interrupt handlers to finish
> +	 * and thus it would deadlock. Instead trigger a worker that does the
> +	 * unregistration.
> +	 */
> +	schedule_work(&priv->free_irq_work);
> +}
> +
> +static void tpm_tis_process_unhandled_interrupt(struct tpm_chip *chip)
> +{
> +	const unsigned int MAX_UNHANDLED_IRQS = 1000;
> +	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
> +	/*
> +	 * The worker to free the TPM interrupt (free_irq_work) may already
> +	 * be scheduled, so make sure it is not scheduled again.
> +	 */
> +	if (!(chip->flags & TPM_CHIP_FLAG_IRQ))
> +		return;
> +
> +	if (time_after(jiffies, priv->last_unhandled_irq + HZ/10))
> +		priv->unhandled_irqs = 1;
> +	else
> +		priv->unhandled_irqs++;
> +
> +	priv->last_unhandled_irq = jiffies;
> +
> +	if (priv->unhandled_irqs > MAX_UNHANDLED_IRQS)
> +		tpm_tis_handle_irq_storm(chip);
> +}
> +
>  static irqreturn_t tis_int_handler(int dummy, void *dev_id)
>  {
>  	struct tpm_chip *chip = dev_id;
> @@ -761,10 +810,10 @@ static irqreturn_t tis_int_handler(int dummy, void *dev_id)
>  
>  	rc = tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &interrupt);
>  	if (rc < 0)
> -		return IRQ_NONE;
> +		goto unhandled;
>  
>  	if (interrupt == 0)
> -		return IRQ_NONE;
> +		goto unhandled;
>  
>  	set_bit(TPM_TIS_IRQ_TESTED, &priv->flags);
>  	if (interrupt & TPM_INTF_DATA_AVAIL_INT)
> @@ -780,10 +829,14 @@ static irqreturn_t tis_int_handler(int dummy, void *dev_id)
>  	rc = tpm_tis_write32(priv, TPM_INT_STATUS(priv->locality), interrupt);
>  	tpm_tis_relinquish_locality(chip, 0);
>  	if (rc < 0)
> -		return IRQ_NONE;
> +		goto unhandled;
>  
>  	tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &interrupt);
>  	return IRQ_HANDLED;
> +
> +unhandled:
> +	tpm_tis_process_unhandled_interrupt(chip);
> +	return IRQ_HANDLED;
>  }
>  
>  static void tpm_tis_gen_interrupt(struct tpm_chip *chip)
> @@ -804,6 +857,15 @@ static void tpm_tis_gen_interrupt(struct tpm_chip *chip)
>  		chip->flags &= ~TPM_CHIP_FLAG_IRQ;
>  }
>  
> +static void tpm_tis_free_irq_func(struct work_struct *work)
> +{
> +	struct tpm_tis_data *priv = container_of(work, typeof(*priv), free_irq_work);
> +	struct tpm_chip *chip = priv->chip;
> +
> +	devm_free_irq(chip->dev.parent, priv->irq, chip);
> +	priv->irq = 0;
> +}
> +
>  /* Register the IRQ and issue a command that will cause an interrupt. If an
>   * irq is seen then leave the chip setup for IRQ operation, otherwise reverse
>   * everything and leave in polling mode. Returns 0 on success.
> @@ -816,6 +878,7 @@ static int tpm_tis_probe_irq_single(struct tpm_chip *chip, u32 intmask,
>  	int rc;
>  	u32 int_status;
>  
> +	INIT_WORK(&priv->free_irq_work, tpm_tis_free_irq_func);
>  
>  	rc = devm_request_threaded_irq(chip->dev.parent, irq, NULL,
>  				       tis_int_handler, IRQF_ONESHOT | flags,
> @@ -918,6 +981,7 @@ void tpm_tis_remove(struct tpm_chip *chip)
>  		interrupt = 0;
>  
>  	tpm_tis_write32(priv, reg, ~TPM_GLOBAL_INT_ENABLE & interrupt);
> +	flush_work(&priv->free_irq_work);
>  
>  	tpm_tis_clkrun_enable(chip, false);
>  
> @@ -1021,6 +1085,7 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
>  	chip->timeout_b = msecs_to_jiffies(TIS_TIMEOUT_B_MAX);
>  	chip->timeout_c = msecs_to_jiffies(TIS_TIMEOUT_C_MAX);
>  	chip->timeout_d = msecs_to_jiffies(TIS_TIMEOUT_D_MAX);
> +	priv->chip = chip;
>  	priv->timeout_min = TPM_TIMEOUT_USECS_MIN;
>  	priv->timeout_max = TPM_TIMEOUT_USECS_MAX;
>  	priv->phy_ops = phy_ops;
> diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h
> index e978f457fd4d..6fc86baa4398 100644
> --- a/drivers/char/tpm/tpm_tis_core.h
> +++ b/drivers/char/tpm/tpm_tis_core.h
> @@ -91,12 +91,18 @@ enum tpm_tis_flags {
>  };
>  
>  struct tpm_tis_data {
> +	struct tpm_chip *chip;
>  	u16 manufacturer_id;
>  	struct mutex locality_count_mutex;
>  	unsigned int locality_count;
>  	int locality;
> +	/* Interrupts */
>  	int irq;
> +	struct work_struct free_irq_work;
> +	unsigned long last_unhandled_irq;
> +	unsigned int unhandled_irqs;
>  	unsigned int int_mask;
> +
>  	unsigned long flags;
>  	void __iomem *ilb_base_addr;
>  	u16 clkrun_enabled;
> 
> base-commit: 44c026a73be8038f03dbdeef028b642880cf1511
> -- 
> 2.40.1
>
  
Péter Ujfalusi May 23, 2023, 6:48 a.m. UTC | #2
On 22/05/2023 17:31, Lino Sanfilippo wrote:
> From: Lino Sanfilippo <l.sanfilippo@kunbus.com>
> 
> Commit e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test") enabled
> interrupts instead of polling on all capable TPMs. Unfortunately, on some
> products the interrupt line is either never asserted or never deasserted.
> 
> The former causes interrupt timeouts and is detected by
> tpm_tis_core_init(). The latter results in interrupt storms.
> 
> Recent reports concern the Lenovo ThinkStation P360 Tiny, Lenovo ThinkPad
> L490 and Inspur NF5180M6:
> 
> https://lore.kernel.org/linux-integrity/20230511005403.24689-1-jsnitsel@redhat.com/
> https://lore.kernel.org/linux-integrity/d80b180a569a9f068d3a2614f062cfa3a78af5a6.camel@kernel.org/
> 
> The current approach to avoid those storms is to disable interrupts by
> adding a DMI quirk for the concerned device.

This looked promising, however it looks like the UPX-i11 needs the DMI
quirk.

> However this is a maintenance burden in the long run, so use a generic
> approach:
> 
> Detect an interrupt storm by counting the number of unhandled interrupts
> within a 10 ms time interval. In case that more than 1000 were unhandled
> deactivate interrupts, deregister the handler and fall back to polling.
> 
> This equals the implementation that handles interrupt storms in
> note_interrupt() by means of timestamps and counters in struct irq_desc.
> However the function to access this structure is private so the logic has
> to be reimplemented in the TPM TIS core.
> 
> Since handler deregistration would deadlock from within the interrupt
> routine trigger a worker thread that executes the unregistration.
> 
> Suggested-by: Lukas Wunner <lukas@wunner.de>
> Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
> ---
>  drivers/char/tpm/tpm_tis_core.c | 71 +++++++++++++++++++++++++++++++--
>  drivers/char/tpm/tpm_tis_core.h |  6 +++
>  2 files changed, 74 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
> index 558144fa707a..458ebf8c2f16 100644
> --- a/drivers/char/tpm/tpm_tis_core.c
> +++ b/drivers/char/tpm/tpm_tis_core.c
> @@ -752,6 +752,55 @@ static bool tpm_tis_req_canceled(struct tpm_chip *chip, u8 status)
>  	return status == TPM_STS_COMMAND_READY;
>  }
>  
> +static void tpm_tis_handle_irq_storm(struct tpm_chip *chip)
> +{
> +	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
> +	int intmask = 0;
> +
> +	dev_err(&chip->dev, HW_ERR
> +		"TPM interrupt storm detected, polling instead\n");

Should this be dev_warn or even dev_info level?
It is done delibaretly and it is handled as planned, so it is not really
an error?

> +
> +	tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
> +
> +	intmask &= ~TPM_GLOBAL_INT_ENABLE;
> +
> +	tpm_tis_request_locality(chip, 0);
> +	tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
> +	tpm_tis_relinquish_locality(chip, 0);
> +
> +	chip->flags &= ~TPM_CHIP_FLAG_IRQ;
> +
> +	/*
> +	 * We must not call devm_free_irq() from within the interrupt handler,
> +	 * since this function waits for running interrupt handlers to finish
> +	 * and thus it would deadlock. Instead trigger a worker that does the
> +	 * unregistration.
> +	 */
> +	schedule_work(&priv->free_irq_work);
> +}
> +
> +static void tpm_tis_process_unhandled_interrupt(struct tpm_chip *chip)
> +{
> +	const unsigned int MAX_UNHANDLED_IRQS = 1000;
> +	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
> +	/*
> +	 * The worker to free the TPM interrupt (free_irq_work) may already
> +	 * be scheduled, so make sure it is not scheduled again.
> +	 */
> +	if (!(chip->flags & TPM_CHIP_FLAG_IRQ))
> +		return;
> +
> +	if (time_after(jiffies, priv->last_unhandled_irq + HZ/10))

unsigned long storm_window;
..
storm_window = priv->last_unhandled_irq + msecs_to_jiffies(10);
if (time_after(jiffies, storm_window))
	priv->unhandled_irqs = 0;

priv->unhandled_irqs++;

> +		priv->unhandled_irqs = 1;
> +	else
> +		priv->unhandled_irqs++;
> +
> +	priv->last_unhandled_irq = jiffies;
> +
> +	if (priv->unhandled_irqs > MAX_UNHANDLED_IRQS)
> +		tpm_tis_handle_irq_storm(chip);

Will the kernel step in and disbale the IRQ before we would have
detected the storm?
I don't know top of my head the trigger in core to stop an interrupt
storm...

> +}
> +
>  static irqreturn_t tis_int_handler(int dummy, void *dev_id)
>  {
>  	struct tpm_chip *chip = dev_id;
> @@ -761,10 +810,10 @@ static irqreturn_t tis_int_handler(int dummy, void *dev_id)
>  
>  	rc = tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &interrupt);
>  	if (rc < 0)
> -		return IRQ_NONE;
> +		goto unhandled;
>  
>  	if (interrupt == 0)
> -		return IRQ_NONE;
> +		goto unhandled;
>  
>  	set_bit(TPM_TIS_IRQ_TESTED, &priv->flags);
>  	if (interrupt & TPM_INTF_DATA_AVAIL_INT)
> @@ -780,10 +829,14 @@ static irqreturn_t tis_int_handler(int dummy, void *dev_id)
>  	rc = tpm_tis_write32(priv, TPM_INT_STATUS(priv->locality), interrupt);
>  	tpm_tis_relinquish_locality(chip, 0);
>  	if (rc < 0)
> -		return IRQ_NONE;
> +		goto unhandled;

This is more like an error than just unhandled IRQ. Yes, it was ignored,
probably because it is common?

>  
>  	tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &interrupt);
>  	return IRQ_HANDLED;
> +
> +unhandled:
> +	tpm_tis_process_unhandled_interrupt(chip);
> +	return IRQ_HANDLED;
>  }
>  
>  static void tpm_tis_gen_interrupt(struct tpm_chip *chip)
> @@ -804,6 +857,15 @@ static void tpm_tis_gen_interrupt(struct tpm_chip *chip)
>  		chip->flags &= ~TPM_CHIP_FLAG_IRQ;
>  }
>  
> +static void tpm_tis_free_irq_func(struct work_struct *work)
> +{
> +	struct tpm_tis_data *priv = container_of(work, typeof(*priv), free_irq_work);
> +	struct tpm_chip *chip = priv->chip;
> +
> +	devm_free_irq(chip->dev.parent, priv->irq, chip);
> +	priv->irq = 0;

Should disable_interrupts() be called instead (with the locality
request/relinquish)?

Is there a chance of a race or is a race matters?

> +}
> +
>  /* Register the IRQ and issue a command that will cause an interrupt. If an
>   * irq is seen then leave the chip setup for IRQ operation, otherwise reverse
>   * everything and leave in polling mode. Returns 0 on success.
> @@ -816,6 +878,7 @@ static int tpm_tis_probe_irq_single(struct tpm_chip *chip, u32 intmask,
>  	int rc;
>  	u32 int_status;
>  
> +	INIT_WORK(&priv->free_irq_work, tpm_tis_free_irq_func);
>  
>  	rc = devm_request_threaded_irq(chip->dev.parent, irq, NULL,
>  				       tis_int_handler, IRQF_ONESHOT | flags,
> @@ -918,6 +981,7 @@ void tpm_tis_remove(struct tpm_chip *chip)
>  		interrupt = 0;
>  
>  	tpm_tis_write32(priv, reg, ~TPM_GLOBAL_INT_ENABLE & interrupt);
> +	flush_work(&priv->free_irq_work);
>  
>  	tpm_tis_clkrun_enable(chip, false);
>  
> @@ -1021,6 +1085,7 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
>  	chip->timeout_b = msecs_to_jiffies(TIS_TIMEOUT_B_MAX);
>  	chip->timeout_c = msecs_to_jiffies(TIS_TIMEOUT_C_MAX);
>  	chip->timeout_d = msecs_to_jiffies(TIS_TIMEOUT_D_MAX);
> +	priv->chip = chip;
>  	priv->timeout_min = TPM_TIMEOUT_USECS_MIN;
>  	priv->timeout_max = TPM_TIMEOUT_USECS_MAX;
>  	priv->phy_ops = phy_ops;
> diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h
> index e978f457fd4d..6fc86baa4398 100644
> --- a/drivers/char/tpm/tpm_tis_core.h
> +++ b/drivers/char/tpm/tpm_tis_core.h
> @@ -91,12 +91,18 @@ enum tpm_tis_flags {
>  };
>  
>  struct tpm_tis_data {
> +	struct tpm_chip *chip;
>  	u16 manufacturer_id;
>  	struct mutex locality_count_mutex;
>  	unsigned int locality_count;
>  	int locality;
> +	/* Interrupts */
>  	int irq;
> +	struct work_struct free_irq_work;
> +	unsigned long last_unhandled_irq;
> +	unsigned int unhandled_irqs;
>  	unsigned int int_mask;
> +
>  	unsigned long flags;
>  	void __iomem *ilb_base_addr;
>  	u16 clkrun_enabled;
> 
> base-commit: 44c026a73be8038f03dbdeef028b642880cf1511
  
Péter Ujfalusi May 23, 2023, 7:07 a.m. UTC | #3
On 23/05/2023 09:48, Péter Ujfalusi wrote:
>>  static void tpm_tis_gen_interrupt(struct tpm_chip *chip)
>> @@ -804,6 +857,15 @@ static void tpm_tis_gen_interrupt(struct tpm_chip *chip)
>>  		chip->flags &= ~TPM_CHIP_FLAG_IRQ;
>>  }
>>  
>> +static void tpm_tis_free_irq_func(struct work_struct *work)
>> +{
>> +	struct tpm_tis_data *priv = container_of(work, typeof(*priv), free_irq_work);
>> +	struct tpm_chip *chip = priv->chip;
>> +
>> +	devm_free_irq(chip->dev.parent, priv->irq, chip);
>> +	priv->irq = 0;
> 
> Should disable_interrupts() be called instead (with the locality
> request/relinquish)?
> 
> Is there a chance of a race or is a race matters?

Nevermind this comment, it is good.
  
Lukas Wunner May 23, 2023, 7:44 a.m. UTC | #4
On Tue, May 23, 2023 at 09:48:23AM +0300, Péter Ujfalusi wrote:
> On 22/05/2023 17:31, Lino Sanfilippo wrote:
[...]
> This looked promising, however it looks like the UPX-i11 needs the DMI
> quirk.

Why is that?  Is there a fundamental problem with the patch or is it
a specific issue with that device?


> > --- a/drivers/char/tpm/tpm_tis_core.c
> > +++ b/drivers/char/tpm/tpm_tis_core.c
> > @@ -752,6 +752,55 @@ static bool tpm_tis_req_canceled(struct tpm_chip *chip, u8 status)
> >  	return status == TPM_STS_COMMAND_READY;
> >  }
> >  
> > +static void tpm_tis_handle_irq_storm(struct tpm_chip *chip)
> > +{
> > +	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
> > +	int intmask = 0;
> > +
> > +	dev_err(&chip->dev, HW_ERR
> > +		"TPM interrupt storm detected, polling instead\n");
> 
> Should this be dev_warn or even dev_info level?

The corresponding message emitted in tpm_tis_core_init() for
an interrupt that's *never* asserted uses dev_err(), so using
dev_err() here as well serves consistency:

	dev_err(&chip->dev, FW_BUG
		"TPM interrupt not working, polling instead\n");

That way the same severity is used both for the never asserted and
the never deasserted interrupt case.


> > +	if (priv->unhandled_irqs > MAX_UNHANDLED_IRQS)
> > +		tpm_tis_handle_irq_storm(chip);
> 
> Will the kernel step in and disbale the IRQ before we would have
> detected the storm?

No.  The detection of spurious interrupts in note_interrupt()
hinges on handlers returning IRQ_NONE.  And this patch makes
tis_int_handler() always return IRQ_HANDLED, thus pretending
success to genirq code.


> >  	rc = tpm_tis_write32(priv, TPM_INT_STATUS(priv->locality), interrupt);
> >  	tpm_tis_relinquish_locality(chip, 0);
> >  	if (rc < 0)
> > -		return IRQ_NONE;
> > +		goto unhandled;
> 
> This is more like an error than just unhandled IRQ. Yes, it was ignored,
> probably because it is common?

The interrupt may be shared and then it's not an error.

Thanks,

Lukas
  
Péter Ujfalusi May 23, 2023, 9:14 a.m. UTC | #5
On 23/05/2023 10:44, Lukas Wunner wrote:
> On Tue, May 23, 2023 at 09:48:23AM +0300, Péter Ujfalusi wrote:
>> On 22/05/2023 17:31, Lino Sanfilippo wrote:
> [...]
>> This looked promising, however it looks like the UPX-i11 needs the DMI
>> quirk.
> 
> Why is that?  Is there a fundamental problem with the patch or is it
> a specific issue with that device?

The flood is not detected (if there is a flood at all), interrupt stops
working after about 200 interrupts - in the latest boot at 118th.
I can check this later, likely tomorrow.

>>> --- a/drivers/char/tpm/tpm_tis_core.c
>>> +++ b/drivers/char/tpm/tpm_tis_core.c
>>> @@ -752,6 +752,55 @@ static bool tpm_tis_req_canceled(struct tpm_chip *chip, u8 status)
>>>  	return status == TPM_STS_COMMAND_READY;
>>>  }
>>>  
>>> +static void tpm_tis_handle_irq_storm(struct tpm_chip *chip)
>>> +{
>>> +	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
>>> +	int intmask = 0;
>>> +
>>> +	dev_err(&chip->dev, HW_ERR
>>> +		"TPM interrupt storm detected, polling instead\n");
>>
>> Should this be dev_warn or even dev_info level?
> 
> The corresponding message emitted in tpm_tis_core_init() for
> an interrupt that's *never* asserted uses dev_err(), so using
> dev_err() here as well serves consistency:
> 
> 	dev_err(&chip->dev, FW_BUG
> 		"TPM interrupt not working, polling instead\n");
> 
> That way the same severity is used both for the never asserted and
> the never deasserted interrupt case.

Oh, OK.
Is there anything the user can do to have a ERROR less boot?

> 
>>> +	if (priv->unhandled_irqs > MAX_UNHANDLED_IRQS)
>>> +		tpm_tis_handle_irq_storm(chip);
>>
>> Will the kernel step in and disbale the IRQ before we would have
>> detected the storm?
> 
> No.  The detection of spurious interrupts in note_interrupt()
> hinges on handlers returning IRQ_NONE.  And this patch makes
> tis_int_handler() always return IRQ_HANDLED, thus pretending
> success to genirq code.

True, thanks!

> 
>>>  	rc = tpm_tis_write32(priv, TPM_INT_STATUS(priv->locality), interrupt);
>>>  	tpm_tis_relinquish_locality(chip, 0);
>>>  	if (rc < 0)
>>> -		return IRQ_NONE;
>>> +		goto unhandled;
>>
>> This is more like an error than just unhandled IRQ. Yes, it was ignored,
>> probably because it is common?
> 
> The interrupt may be shared and then it's not an error.

but this is tpm_tis_write32() failing, no? If it is shared interrupt and
we return IRQ_HANDLED unconditionally then I think the core will think
that the interrupt was for this device and it was handled.
  
Hans de Goede May 23, 2023, 9:20 a.m. UTC | #6
Hi,

On 5/23/23 11:14, Péter Ujfalusi wrote:
> 
> 
> On 23/05/2023 10:44, Lukas Wunner wrote:
>> On Tue, May 23, 2023 at 09:48:23AM +0300, Péter Ujfalusi wrote:
>>> On 22/05/2023 17:31, Lino Sanfilippo wrote:
>> [...]
>>> This looked promising, however it looks like the UPX-i11 needs the DMI
>>> quirk.
>>
>> Why is that?  Is there a fundamental problem with the patch or is it
>> a specific issue with that device?
> 
> The flood is not detected (if there is a flood at all), interrupt stops
> working after about 200 interrupts - in the latest boot at 118th.
> I can check this later, likely tomorrow.
> 
>>>> --- a/drivers/char/tpm/tpm_tis_core.c
>>>> +++ b/drivers/char/tpm/tpm_tis_core.c
>>>> @@ -752,6 +752,55 @@ static bool tpm_tis_req_canceled(struct tpm_chip *chip, u8 status)
>>>>  	return status == TPM_STS_COMMAND_READY;
>>>>  }
>>>>  
>>>> +static void tpm_tis_handle_irq_storm(struct tpm_chip *chip)
>>>> +{
>>>> +	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
>>>> +	int intmask = 0;
>>>> +
>>>> +	dev_err(&chip->dev, HW_ERR
>>>> +		"TPM interrupt storm detected, polling instead\n");
>>>
>>> Should this be dev_warn or even dev_info level?
>>
>> The corresponding message emitted in tpm_tis_core_init() for
>> an interrupt that's *never* asserted uses dev_err(), so using
>> dev_err() here as well serves consistency:
>>
>> 	dev_err(&chip->dev, FW_BUG
>> 		"TPM interrupt not working, polling instead\n");
>>
>> That way the same severity is used both for the never asserted and
>> the never deasserted interrupt case.
> 
> Oh, OK.
> Is there anything the user can do to have a ERROR less boot?

That is a good point. Even though the typical dmesg has at least some false-positive error messages I believe we should still strive to not log errors in cases where there is not e.g. an actual error which the user needs to care about (e.g. disk IO errors).

Usually in similar cases like this, where we are basically correcting for firmware bugs (1) we use:

	dev_warn(dev, FW_BUG "...", ...);

maybe we should switch both messages here to this ?

FW_BUG is: defined in linux/printk as:

#define FW_BUG		"[Firmware Bug]: "

And we are trying to use this in places like this both for uniformity of reporting these kinda bugs and to allow grepping for it.

Regards,

Hans



1) providing wrong / non working ACPI IRQ resources in this case
  
Péter Ujfalusi May 23, 2023, 9:35 a.m. UTC | #7
Hi,

sorry for the unwrapped lines...

On 23/05/2023 12:14, Péter Ujfalusi wrote:
> 
> 
> On 23/05/2023 10:44, Lukas Wunner wrote:
>> On Tue, May 23, 2023 at 09:48:23AM +0300, Péter Ujfalusi wrote:
>>> On 22/05/2023 17:31, Lino Sanfilippo wrote:
>> [...]
>>> This looked promising, however it looks like the UPX-i11 needs the DMI
>>> quirk.
>>
>> Why is that?  Is there a fundamental problem with the patch or is it
>> a specific issue with that device?
> 
> The flood is not detected (if there is a flood at all), interrupt stops
> working after about 200 interrupts - in the latest boot at 118th.
> I can check this later, likely tomorrow.

With the patches and this diff:

diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index 8f4f2cb5520f..6a910d3277d5 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -795,6 +795,7 @@ static void tpm_tis_process_unhandled_interrupt(struct tpm_chip *chip)
 
 	priv->last_unhandled_irq = jiffies;
 
+	pr_warn("[PETER] %s: unhandled_irqs: %d\n", __func__, priv->unhandled_irqs);
 	if (priv->unhandled_irqs > MAX_UNHANDLED_IRQS)
 		tpm_tis_handle_irq_storm(chip);
 }


In some boot I don't get a print at all and reboot takes
2 minutes (tpm timeout), or as it happened now:

# dmesg | grep tpm
[    4.306999] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 22)
[    4.325868] [PETER] tpm_tis_process_unhandled_interrupt: unhandled_irqs: 1
[    4.325908] [PETER] tpm_tis_process_unhandled_interrupt: unhandled_irqs: 2
...
[    4.329579] [PETER] tpm_tis_process_unhandled_interrupt: unhandled_irqs: 91
[    5.129056] [PETER] tpm_tis_process_unhandled_interrupt: unhandled_irqs: 1
...
[    5.129561] [PETER] tpm_tis_process_unhandled_interrupt: unhandled_irqs: 10

# cat /proc/interrupts | grep tpm
  28:          0          0          0        133  IR-IO-APIC   28-fasteoi   tpm0

Reboot takes in all cases 2 minutes to pass the timeout for the TPM2_CC_SHUTDOWN
  
Lino Sanfilippo May 23, 2023, 10:35 a.m. UTC | #8
Hi,

On 23.05.23 11:35, Péter Ujfalusi wrote:
> ATTENTION: This e-mail is from an external sender. Please check attachments and links before opening e.g. with mouseover.
> 
> 
> Hi,
> 
> sorry for the unwrapped lines...
> 
> On 23/05/2023 12:14, Péter Ujfalusi wrote:
>>
>>
>> On 23/05/2023 10:44, Lukas Wunner wrote:
>>> On Tue, May 23, 2023 at 09:48:23AM +0300, Péter Ujfalusi wrote:
>>>> On 22/05/2023 17:31, Lino Sanfilippo wrote:
>>> [...]
>>>> This looked promising, however it looks like the UPX-i11 needs the DMI
>>>> quirk.
>>>
>>> Why is that?  Is there a fundamental problem with the patch or is it
>>> a specific issue with that device?
>>
>> The flood is not detected (if there is a flood at all), interrupt stops
>> working after about 200 interrupts - in the latest boot at 118th.
>> I can check this later, likely tomorrow.
> 
> With the patches and this diff:
> 
> diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
> index 8f4f2cb5520f..6a910d3277d5 100644
> --- a/drivers/char/tpm/tpm_tis_core.c
> +++ b/drivers/char/tpm/tpm_tis_core.c
> @@ -795,6 +795,7 @@ static void tpm_tis_process_unhandled_interrupt(struct tpm_chip *chip)
> 
>         priv->last_unhandled_irq = jiffies;
> 
> +       pr_warn("[PETER] %s: unhandled_irqs: %d\n", __func__, priv->unhandled_irqs);
>         if (priv->unhandled_irqs > MAX_UNHANDLED_IRQS)
>                 tpm_tis_handle_irq_storm(chip);
>  }
> 
> 
> In some boot I don't get a print at all and reboot takes
> 2 minutes (tpm timeout), or as it happened now:
> 
> # dmesg | grep tpm
> [    4.306999] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 22)
> [    4.325868] [PETER] tpm_tis_process_unhandled_interrupt: unhandled_irqs: 1
> [    4.325908] [PETER] tpm_tis_process_unhandled_interrupt: unhandled_irqs: 2
> ...
> [    4.329579] [PETER] tpm_tis_process_unhandled_interrupt: unhandled_irqs: 91
> [    5.129056] [PETER] tpm_tis_process_unhandled_interrupt: unhandled_irqs: 1
> ...
> [    5.129561] [PETER] tpm_tis_process_unhandled_interrupt: unhandled_irqs: 10
> 
> # cat /proc/interrupts | grep tpm
>   28:          0          0          0        133  IR-IO-APIC   28-fasteoi   tpm0
> 
> Reboot takes in all cases 2 minutes to pass the timeout for the TPM2_CC_SHUTDOWN
> 

Thanks a lot for testing.

The patch was originally created to fix a reported interrupt storm:

https://lore.kernel.org/linux-integrity/d80b180a569a9f068d3a2614f062cfa3a78af5a6.camel@kernel.org/

My hope was that it could also fix the issues seen with ThinkPad L490 and ThinkStation P360. But
in some of your test cases there seems to be no storm at all, so this patch wont help. So for now
I am afraid we have to keep the DMI quirks to handle these devices. I will adjust the commit 
message accordingly.


Thanks,
Lino



> --
> Péter
  
Lino Sanfilippo May 23, 2023, 10:41 a.m. UTC | #9
Hi,

On 23.05.23 11:14, Péter Ujfalusi wrote:

>>
>>>>     rc = tpm_tis_write32(priv, TPM_INT_STATUS(priv->locality), interrupt);
>>>>     tpm_tis_relinquish_locality(chip, 0);
>>>>     if (rc < 0)
>>>> -           return IRQ_NONE;
>>>> +           goto unhandled;
>>>
>>> This is more like an error than just unhandled IRQ. Yes, it was ignored,
>>> probably because it is common?
>>
>> The interrupt may be shared and then it's not an error.
> 
> but this is tpm_tis_write32() failing, no? If it is shared interrupt and
> we return IRQ_HANDLED unconditionally then I think the core will think
> that the interrupt was for this device and it was handled.
> 

At this point we already know the interrupt was for our device. Otherwise we would
have already bailed out at

	if (interrupt == 0)
	

Regards,
Lino



> --
> Péter
  
Lukas Wunner May 23, 2023, 3:16 p.m. UTC | #10
On Tue, May 23, 2023 at 12:14:28PM +0300, Péter Ujfalusi wrote:
> On 23/05/2023 10:44, Lukas Wunner wrote:
> > On Tue, May 23, 2023 at 09:48:23AM +0300, Péter Ujfalusi wrote:
> >> On 22/05/2023 17:31, Lino Sanfilippo wrote:
> > [...]
> >> This looked promising, however it looks like the UPX-i11 needs the DMI
> >> quirk.
> > 
> > Why is that?  Is there a fundamental problem with the patch or is it
> > a specific issue with that device?
> 
> The flood is not detected (if there is a flood at all), interrupt stops
> working after about 200 interrupts - in the latest boot at 118th.

You've got a variant of the "never asserted interrupt".

That condition is currently tested only once on probe in tpm_tis_core_init().
The solution would be to disable interrupts whenever they're not (or no
longer asserted).  

However, that's a distinct issue from the one addressed by the present
patch, which deals with a "never *de*asserted interrupt".


> >>> +	dev_err(&chip->dev, HW_ERR
> >>> +		"TPM interrupt storm detected, polling instead\n");
> >>
> >> Should this be dev_warn or even dev_info level?
> > 
> > The corresponding message emitted in tpm_tis_core_init() for
> > an interrupt that's *never* asserted uses dev_err(), so using
> > dev_err() here as well serves consistency:
> > 
> > 	dev_err(&chip->dev, FW_BUG
> > 		"TPM interrupt not working, polling instead\n");
> > 
> > That way the same severity is used both for the never asserted and
> > the never deasserted interrupt case.
> 
> Oh, OK.
> Is there anything the user can do to have a ERROR less boot?

You're right that the user can't do anything about it and that
toning the message down to KERN_WARN or even KERN_NOTICE severity
may be appropriate.

However the above-quoted message for the never asserted interrupt
in tpm_tis_core_init() should then likewise be toned down to the
same severity.

I'm wondering why that message uses FW_BUG.  That doesn't make any
sense to me.  It's typically not a firmware bug, but a hardware issue,
e.g. an interrupt pin may erroneously not be connected or may be
connected to ground.  Lino used HW_ERR, which seems more appropriate
to me.


> >>>  	rc = tpm_tis_write32(priv, TPM_INT_STATUS(priv->locality), interrupt);
> >>>  	tpm_tis_relinquish_locality(chip, 0);
> >>>  	if (rc < 0)
> >>> -		return IRQ_NONE;
> >>> +		goto unhandled;
> >>
> >> This is more like an error than just unhandled IRQ. Yes, it was ignored,
> >> probably because it is common?
> > 
> > The interrupt may be shared and then it's not an error.
> 
> but this is tpm_tis_write32() failing, no? If it is shared interrupt and
> we return IRQ_HANDLED unconditionally then I think the core will think
> that the interrupt was for this device and it was handled.

No.  The IRQ_HANDLED versus IRQ_NONE return values are merely used
for book-keeping of spurious interrupts.  If IRQ_HANDLED is returned,
the other handlers will still be invoked.  It is not discernible whether
a shared interrupt was asserted by a single device or by multiple devices,
so all handlers need to be called.

Thanks,

Lukas
  
Lukas Wunner May 23, 2023, 3:19 p.m. UTC | #11
On Tue, May 23, 2023 at 12:35:09PM +0300, Péter Ujfalusi wrote:
> In some boot I don't get a print at all and reboot takes
> 2 minutes (tpm timeout), or as it happened now:
> 
> # dmesg | grep tpm
> [    4.306999] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 22)
> [    4.325868] [PETER] tpm_tis_process_unhandled_interrupt: unhandled_irqs: 1
> [    4.325908] [PETER] tpm_tis_process_unhandled_interrupt: unhandled_irqs: 2
> ...
> [    4.329579] [PETER] tpm_tis_process_unhandled_interrupt: unhandled_irqs: 91
> [    5.129056] [PETER] tpm_tis_process_unhandled_interrupt: unhandled_irqs: 1
> ...
> [    5.129561] [PETER] tpm_tis_process_unhandled_interrupt: unhandled_irqs: 10

This looks like the interrupt line may be floating and any interrupts
you get are probably caused by induced static or something.

Thanks,

Lukas
  
Jarkko Sakkinen May 23, 2023, 6:53 p.m. UTC | #12
On Mon May 22, 2023 at 5:31 PM EEST, Lino Sanfilippo wrote:
> From: Lino Sanfilippo <l.sanfilippo@kunbus.com>
>
> Commit e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test") enabled
> interrupts instead of polling on all capable TPMs. Unfortunately, on some
> products the interrupt line is either never asserted or never deasserted.
>
> The former causes interrupt timeouts and is detected by
> tpm_tis_core_init(). The latter results in interrupt storms.
>
> Recent reports concern the Lenovo ThinkStation P360 Tiny, Lenovo ThinkPad
> L490 and Inspur NF5180M6:
>
> https://lore.kernel.org/linux-integrity/20230511005403.24689-1-jsnitsel@redhat.com/
> https://lore.kernel.org/linux-integrity/d80b180a569a9f068d3a2614f062cfa3a78af5a6.camel@kernel.org/
>
> The current approach to avoid those storms is to disable interrupts by
> adding a DMI quirk for the concerned device.
>
> However this is a maintenance burden in the long run, so use a generic
> approach:

I'm trying to comprehend how you evaluate, how big maintenance burden
this would be. Adding even a few dozen table entries is not a
maintenance burden.

On the other hand any new functionality is objectively a maintanance
burden of some measure (applies to any functionality). So how do we know
that taking this change is less of a maintenance burden than just add
new table entries, as they come up?

> Detect an interrupt storm by counting the number of unhandled interrupts
> within a 10 ms time interval. In case that more than 1000 were unhandled
> deactivate interrupts, deregister the handler and fall back to polling.

I know it can be sometimes hard to evaluate but can you try to explain
how you came up to the 10 ms sampling period and 1000 interrupt
threshold? I just don't like abritrary numbers.

> This equals the implementation that handles interrupt storms in
> note_interrupt() by means of timestamps and counters in struct irq_desc.
> However the function to access this structure is private so the logic has
> to be reimplemented in the TPM TIS core.
>
> Since handler deregistration would deadlock from within the interrupt
> routine trigger a worker thread that executes the unregistration.
>
> Suggested-by: Lukas Wunner <lukas@wunner.de>
> Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
> ---
>  drivers/char/tpm/tpm_tis_core.c | 71 +++++++++++++++++++++++++++++++--
>  drivers/char/tpm/tpm_tis_core.h |  6 +++
>  2 files changed, 74 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
> index 558144fa707a..458ebf8c2f16 100644
> --- a/drivers/char/tpm/tpm_tis_core.c
> +++ b/drivers/char/tpm/tpm_tis_core.c
> @@ -752,6 +752,55 @@ static bool tpm_tis_req_canceled(struct tpm_chip *chip, u8 status)
>  	return status == TPM_STS_COMMAND_READY;
>  }
>  
> +static void tpm_tis_handle_irq_storm(struct tpm_chip *chip)
> +{
> +	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
> +	int intmask = 0;
> +
> +	dev_err(&chip->dev, HW_ERR
> +		"TPM interrupt storm detected, polling instead\n");
> +
> +	tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
> +
> +	intmask &= ~TPM_GLOBAL_INT_ENABLE;
> +
> +	tpm_tis_request_locality(chip, 0);
> +	tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
> +	tpm_tis_relinquish_locality(chip, 0);
> +
> +	chip->flags &= ~TPM_CHIP_FLAG_IRQ;
> +
> +	/*
> +	 * We must not call devm_free_irq() from within the interrupt handler,
> +	 * since this function waits for running interrupt handlers to finish
> +	 * and thus it would deadlock. Instead trigger a worker that does the
> +	 * unregistration.
> +	 */
> +	schedule_work(&priv->free_irq_work);
> +}
> +
> +static void tpm_tis_process_unhandled_interrupt(struct tpm_chip *chip)
> +{
> +	const unsigned int MAX_UNHANDLED_IRQS = 1000;
> +	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
> +	/*
> +	 * The worker to free the TPM interrupt (free_irq_work) may already
> +	 * be scheduled, so make sure it is not scheduled again.
> +	 */
> +	if (!(chip->flags & TPM_CHIP_FLAG_IRQ))
> +		return;
> +
> +	if (time_after(jiffies, priv->last_unhandled_irq + HZ/10))
> +		priv->unhandled_irqs = 1;
> +	else
> +		priv->unhandled_irqs++;
> +
> +	priv->last_unhandled_irq = jiffies;
> +
> +	if (priv->unhandled_irqs > MAX_UNHANDLED_IRQS)
> +		tpm_tis_handle_irq_storm(chip);
> +}
> +
>  static irqreturn_t tis_int_handler(int dummy, void *dev_id)
>  {
>  	struct tpm_chip *chip = dev_id;
> @@ -761,10 +810,10 @@ static irqreturn_t tis_int_handler(int dummy, void *dev_id)
>  
>  	rc = tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &interrupt);
>  	if (rc < 0)
> -		return IRQ_NONE;
> +		goto unhandled;
>  
>  	if (interrupt == 0)
> -		return IRQ_NONE;
> +		goto unhandled;
>  
>  	set_bit(TPM_TIS_IRQ_TESTED, &priv->flags);
>  	if (interrupt & TPM_INTF_DATA_AVAIL_INT)
> @@ -780,10 +829,14 @@ static irqreturn_t tis_int_handler(int dummy, void *dev_id)
>  	rc = tpm_tis_write32(priv, TPM_INT_STATUS(priv->locality), interrupt);
>  	tpm_tis_relinquish_locality(chip, 0);
>  	if (rc < 0)
> -		return IRQ_NONE;
> +		goto unhandled;
>  
>  	tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &interrupt);
>  	return IRQ_HANDLED;
> +
> +unhandled:
> +	tpm_tis_process_unhandled_interrupt(chip);
> +	return IRQ_HANDLED;

Shouldn't the return value be IRQ_NONE?

>  }
>  
>  static void tpm_tis_gen_interrupt(struct tpm_chip *chip)
> @@ -804,6 +857,15 @@ static void tpm_tis_gen_interrupt(struct tpm_chip *chip)
>  		chip->flags &= ~TPM_CHIP_FLAG_IRQ;
>  }
>  
> +static void tpm_tis_free_irq_func(struct work_struct *work)
> +{
> +	struct tpm_tis_data *priv = container_of(work, typeof(*priv), free_irq_work);
> +	struct tpm_chip *chip = priv->chip;
> +
> +	devm_free_irq(chip->dev.parent, priv->irq, chip);
> +	priv->irq = 0;
> +}
> +
>  /* Register the IRQ and issue a command that will cause an interrupt. If an
>   * irq is seen then leave the chip setup for IRQ operation, otherwise reverse
>   * everything and leave in polling mode. Returns 0 on success.
> @@ -816,6 +878,7 @@ static int tpm_tis_probe_irq_single(struct tpm_chip *chip, u32 intmask,
>  	int rc;
>  	u32 int_status;
>  
> +	INIT_WORK(&priv->free_irq_work, tpm_tis_free_irq_func);
>  
>  	rc = devm_request_threaded_irq(chip->dev.parent, irq, NULL,
>  				       tis_int_handler, IRQF_ONESHOT | flags,
> @@ -918,6 +981,7 @@ void tpm_tis_remove(struct tpm_chip *chip)
>  		interrupt = 0;
>  
>  	tpm_tis_write32(priv, reg, ~TPM_GLOBAL_INT_ENABLE & interrupt);
> +	flush_work(&priv->free_irq_work);
>  
>  	tpm_tis_clkrun_enable(chip, false);
>  
> @@ -1021,6 +1085,7 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
>  	chip->timeout_b = msecs_to_jiffies(TIS_TIMEOUT_B_MAX);
>  	chip->timeout_c = msecs_to_jiffies(TIS_TIMEOUT_C_MAX);
>  	chip->timeout_d = msecs_to_jiffies(TIS_TIMEOUT_D_MAX);
> +	priv->chip = chip;
>  	priv->timeout_min = TPM_TIMEOUT_USECS_MIN;
>  	priv->timeout_max = TPM_TIMEOUT_USECS_MAX;
>  	priv->phy_ops = phy_ops;
> diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h
> index e978f457fd4d..6fc86baa4398 100644
> --- a/drivers/char/tpm/tpm_tis_core.h
> +++ b/drivers/char/tpm/tpm_tis_core.h
> @@ -91,12 +91,18 @@ enum tpm_tis_flags {
>  };
>  
>  struct tpm_tis_data {
> +	struct tpm_chip *chip;
>  	u16 manufacturer_id;
>  	struct mutex locality_count_mutex;
>  	unsigned int locality_count;
>  	int locality;
> +	/* Interrupts */

Not relevant change for a bug fix.

>  	int irq;
> +	struct work_struct free_irq_work;
> +	unsigned long last_unhandled_irq;
> +	unsigned int unhandled_irqs;
>  	unsigned int int_mask;
> +

Ditto (for the empty line).

>  	unsigned long flags;
>  	void __iomem *ilb_base_addr;
>  	u16 clkrun_enabled;
>
> base-commit: 44c026a73be8038f03dbdeef028b642880cf1511
> -- 
> 2.40.1

BR, Jarkko
  
Jarkko Sakkinen May 23, 2023, 7 p.m. UTC | #13
On Tue May 23, 2023 at 9:53 PM EEST, Jarkko Sakkinen wrote:
> On Mon May 22, 2023 at 5:31 PM EEST, Lino Sanfilippo wrote:
> > From: Lino Sanfilippo <l.sanfilippo@kunbus.com>
> >
> > Commit e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test") enabled
> > interrupts instead of polling on all capable TPMs. Unfortunately, on some
> > products the interrupt line is either never asserted or never deasserted.
> >
> > The former causes interrupt timeouts and is detected by
> > tpm_tis_core_init(). The latter results in interrupt storms.
> >
> > Recent reports concern the Lenovo ThinkStation P360 Tiny, Lenovo ThinkPad
> > L490 and Inspur NF5180M6:
> >
> > https://lore.kernel.org/linux-integrity/20230511005403.24689-1-jsnitsel@redhat.com/
> > https://lore.kernel.org/linux-integrity/d80b180a569a9f068d3a2614f062cfa3a78af5a6.camel@kernel.org/
> >
> > The current approach to avoid those storms is to disable interrupts by
> > adding a DMI quirk for the concerned device.
> >
> > However this is a maintenance burden in the long run, so use a generic
> > approach:
>
> I'm trying to comprehend how you evaluate, how big maintenance burden
> this would be. Adding even a few dozen table entries is not a
> maintenance burden.
>
> On the other hand any new functionality is objectively a maintanance
> burden of some measure (applies to any functionality). So how do we know
> that taking this change is less of a maintenance burden than just add
> new table entries, as they come up?

I feel also a bit resistant because leaf driver framework is really
a wrong location in the kernel tree for IRQ storm detection.

It would be better to have it signaled above the TPM driver, and the
driver would then just act on it.

BR, Jarkko
  
Jarkko Sakkinen May 23, 2023, 7:12 p.m. UTC | #14
On Tue May 23, 2023 at 9:53 PM EEST, Jarkko Sakkinen wrote:
> On Mon May 22, 2023 at 5:31 PM EEST, Lino Sanfilippo wrote:
> > From: Lino Sanfilippo <l.sanfilippo@kunbus.com>
> >
> > Commit e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test") enabled
> > interrupts instead of polling on all capable TPMs. Unfortunately, on some
> > products the interrupt line is either never asserted or never deasserted.
> >
> > The former causes interrupt timeouts and is detected by
> > tpm_tis_core_init(). The latter results in interrupt storms.
> >
> > Recent reports concern the Lenovo ThinkStation P360 Tiny, Lenovo ThinkPad
> > L490 and Inspur NF5180M6:
> >
> > https://lore.kernel.org/linux-integrity/20230511005403.24689-1-jsnitsel@redhat.com/
> > https://lore.kernel.org/linux-integrity/d80b180a569a9f068d3a2614f062cfa3a78af5a6.camel@kernel.org/
> >
> > The current approach to avoid those storms is to disable interrupts by
> > adding a DMI quirk for the concerned device.
> >
> > However this is a maintenance burden in the long run, so use a generic
> > approach:
>
> I'm trying to comprehend how you evaluate, how big maintenance burden
> this would be. Adding even a few dozen table entries is not a
> maintenance burden.
>
> On the other hand any new functionality is objectively a maintanance
> burden of some measure (applies to any functionality). So how do we know
> that taking this change is less of a maintenance burden than just add
> new table entries, as they come up?
>
> > Detect an interrupt storm by counting the number of unhandled interrupts
> > within a 10 ms time interval. In case that more than 1000 were unhandled
> > deactivate interrupts, deregister the handler and fall back to polling.
>
> I know it can be sometimes hard to evaluate but can you try to explain
> how you came up to the 10 ms sampling period and 1000 interrupt
> threshold? I just don't like abritrary numbers.

Also here I wonder how you came up with this computational model. This
is not same as saying it is wrong. There's just whole stack of options.

Out of top of my head you could e.g. window average the duration between
IRQs. When the average goes beyond threshold, then you shutdown
interrupts.

The pro I would see in this that it is much easier intuitively discuss
how much there should be time in-between interrupts that the kernel
handles it, than how many IRQs you can stack into time interval, which
blows my head tbh.

BR, Jarkko
  
Jarkko Sakkinen May 23, 2023, 7:35 p.m. UTC | #15
On Tue May 23, 2023 at 9:48 AM EEST, Péter Ujfalusi wrote:
>
>
> On 22/05/2023 17:31, Lino Sanfilippo wrote:
> > From: Lino Sanfilippo <l.sanfilippo@kunbus.com>
> > 
> > Commit e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test") enabled
> > interrupts instead of polling on all capable TPMs. Unfortunately, on some
> > products the interrupt line is either never asserted or never deasserted.
> > 
> > The former causes interrupt timeouts and is detected by
> > tpm_tis_core_init(). The latter results in interrupt storms.
> > 
> > Recent reports concern the Lenovo ThinkStation P360 Tiny, Lenovo ThinkPad
> > L490 and Inspur NF5180M6:
> > 
> > https://lore.kernel.org/linux-integrity/20230511005403.24689-1-jsnitsel@redhat.com/
> > https://lore.kernel.org/linux-integrity/d80b180a569a9f068d3a2614f062cfa3a78af5a6.camel@kernel.org/
> > 
> > The current approach to avoid those storms is to disable interrupts by
> > adding a DMI quirk for the concerned device.
>
> This looked promising, however it looks like the UPX-i11 needs the DMI
> quirk.

My take is this:

1. Keep calmd and add DMI quirks (for some time).
2. Let's reconsider if this becomes a too pressuring issue.
3. If there is need for IRQ detection, let's pick a parameter that
   would be also *intuitive* tuning parameter [1].

[1] https://lore.kernel.org/linux-integrity/CSTW9UX4ERDZ.VBD1QIWLBM75@suppilovahvero/

BR, Jarkko
  
Lukas Wunner May 23, 2023, 7:37 p.m. UTC | #16
On Tue, May 23, 2023 at 09:53:58PM +0300, Jarkko Sakkinen wrote:
> On Mon May 22, 2023 at 5:31 PM EEST, Lino Sanfilippo wrote:
> > Commit e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test") enabled
> > interrupts instead of polling on all capable TPMs. Unfortunately, on some
> > products the interrupt line is either never asserted or never deasserted.
> >
> > The former causes interrupt timeouts and is detected by
> > tpm_tis_core_init(). The latter results in interrupt storms.
[...]
> > The current approach to avoid those storms is to disable interrupts by
> > adding a DMI quirk for the concerned device.
> >
> > However this is a maintenance burden in the long run, so use a generic
> > approach:
> 
> I'm trying to comprehend how you evaluate, how big maintenance burden
> this would be. Adding even a few dozen table entries is not a
> maintenance burden.
> 
> On the other hand any new functionality is objectively a maintanance
> burden of some measure (applies to any functionality). So how do we know
> that taking this change is less of a maintenance burden than just add
> new table entries, as they come up?

That approach seems irresponsible to me as you force users to report
the issue, you force developers to add a quirk.  Users expect things
to just work.  And that's precisely what this patch will achieve.

Lino introduced the issues by universally enabling interrupts.
He acted responsibly by making the issue disappear most likely
for everyone.  I find it bewildering that you'd prefer the opposite
approach and rather inflict on every affected user to open a
bug report and hope that someone writes a patch for them.

So far interrupts are only enabled in an rc release and linux-next,
yet issue reports have popped up quickly.  My expectation is we'll
see a lot more reports once v6.4-final is released, doubly so when
the next stable kernel with that feature is released.


> > Detect an interrupt storm by counting the number of unhandled interrupts
> > within a 10 ms time interval. In case that more than 1000 were unhandled
> > deactivate interrupts, deregister the handler and fall back to polling.
> 
> I know it can be sometimes hard to evaluate but can you try to explain
> how you came up to the 10 ms sampling period and 1000 interrupt
> threshold? I just don't like abritrary numbers.

If you choose a too low number, you'll get false positives due to
regular interrupt assertion either by the TPM or by another device
sharing the interrupt.

Those numbers may have to be fine-tuned over time to eliminate
false positives and false negatives.  They're as good a number as
any to get that fine-tuning process started.


> > +unhandled:
> > +	tpm_tis_process_unhandled_interrupt(chip);
> > +	return IRQ_HANDLED;
> 
> Shouldn't the return value be IRQ_NONE?

No, absolutely not.  If you return IRQ_NONE here then genirq code
will increase the spurious interrupt counter.  That's bad because
the IRQ storm detection tpm_tis_core.c would race with the IRQ storm
detection in genirq code:

Note that disablement of the interrupt must happen in a work_struct
here to avoid a deadlock. (The deadlock would occur because
devm_free_irq() waits for the interrupt handler to finish.)

Now, let's say the 1000 unhandled interrupts limit has been reached
and the work_struct is scheduled.  If the work_struct isn't run
quickly enough, you may reach the 99900 limit in note_interrupt()
(see kernel/irq/spurious.c) and then genirq code will force the
interrupt off completely.

To avoid that you *have* to return IRQ_HANDLED here and thus pretend
towards genirq code that the interrupt was not spurious.


> >  struct tpm_tis_data {
> > +	struct tpm_chip *chip;
> >  	u16 manufacturer_id;
> >  	struct mutex locality_count_mutex;
> >  	unsigned int locality_count;
> >  	int locality;
> > +	/* Interrupts */
> 
> Not relevant change for a bug fix.

But not harmful either, is it?

Thanks,

Lukas
  
Lukas Wunner May 23, 2023, 7:46 p.m. UTC | #17
On Tue, May 23, 2023 at 10:00:10PM +0300, Jarkko Sakkinen wrote:
> I feel also a bit resistant because leaf driver framework is really
> a wrong location in the kernel tree for IRQ storm detection.
> 
> It would be better to have it signaled above the TPM driver, and the
> driver would then just act on it.

That would require changing the logic in kernel/irq/spurious.c.

At this point in the cycle, such a change would definitely not be
eligible as a fix for v6.4.

Thanks,

Lukas
  
Lino Sanfilippo May 23, 2023, 8:46 p.m. UTC | #18
Hi,

On 23.05.23 20:53, Jarkko Sakkinen wrote:
> ATTENTION: This e-mail is from an external sender. Please check attachments and links before opening e.g. with mouseover.
> 
> 
> On Mon May 22, 2023 at 5:31 PM EEST, Lino Sanfilippo wrote:
>> From: Lino Sanfilippo <l.sanfilippo@kunbus.com>
>>
>> Commit e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test") enabled
>> interrupts instead of polling on all capable TPMs. Unfortunately, on some
>> products the interrupt line is either never asserted or never deasserted.
>>
>> The former causes interrupt timeouts and is detected by
>> tpm_tis_core_init(). The latter results in interrupt storms.
>>
>> Recent reports concern the Lenovo ThinkStation P360 Tiny, Lenovo ThinkPad
>> L490 and Inspur NF5180M6:
>>
>> https://lore.kernel.org/linux-integrity/20230511005403.24689-1-jsnitsel@redhat.com/
>> https://lore.kernel.org/linux-integrity/d80b180a569a9f068d3a2614f062cfa3a78af5a6.camel@kernel.org/
>>
>> The current approach to avoid those storms is to disable interrupts by
>> adding a DMI quirk for the concerned device.
>>
>> However this is a maintenance burden in the long run, so use a generic
>> approach:
> 
> I'm trying to comprehend how you evaluate, how big maintenance burden
> this would be. Adding even a few dozen table entries is not a
> maintenance burden.
> 
> On the other hand any new functionality is objectively a maintanance
> burden of some measure (applies to any functionality). So how do we know
> that taking this change is less of a maintenance burden than just add
> new table entries, as they come up?
> 

Initially this set was created as a response to this 0-day bug report which you asked me
to have a look at:

https://lore.kernel.org/linux-integrity/d80b180a569a9f068d3a2614f062cfa3a78af5a6.camel@kernel.org/

My hope was that it could also avoid some of (existing or future) DMI entries. But even if it does not
(e.g. the problem Péter Ujfalusi reported with the UPX-i11 cannot be fixed by this patch set and thus
needs the DMI quirk) we may at least avoid more bug reports due to interrupt storms once
6.4 is released. 


>> Detect an interrupt storm by counting the number of unhandled interrupts
>> within a 10 ms time interval. In case that more than 1000 were unhandled
>> deactivate interrupts, deregister the handler and fall back to polling.
> 
> I know it can be sometimes hard to evaluate but can you try to explain
> how you came up to the 10 ms sampling period and 1000 interrupt
> threshold? I just don't like abritrary numbers.

At least the 100 ms is not plucked out of thin air but its the same time period
that the generic code in note_interrupt() uses - I assume for a good reason.
Not only this number but the whole irq storm detection logic is taken from 
there: 

> 
>> This equals the implementation that handles interrupt storms in
>> note_interrupt() by means of timestamps and counters in struct irq_desc.

The number of 1000 unhandled interrupts is still far below the 99900 used in
note_interrupt() but IMHO enough to indicate that there is something seriously
wrong with interrupt processing and it is probably saver to fall back to polling.


Regards,
Lino
  
Lino Sanfilippo May 23, 2023, 8:50 p.m. UTC | #19
On 23.05.23 21:00, Jarkko Sakkinen wrote:
> ATTENTION: This e-mail is from an external sender. Please check attachments and links before opening e.g. with mouseover.
> 
> 
> On Tue May 23, 2023 at 9:53 PM EEST, Jarkko Sakkinen wrote:
>> On Mon May 22, 2023 at 5:31 PM EEST, Lino Sanfilippo wrote:
>>> From: Lino Sanfilippo <l.sanfilippo@kunbus.com>
>>>
>>> Commit e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test") enabled
>>> interrupts instead of polling on all capable TPMs. Unfortunately, on some
>>> products the interrupt line is either never asserted or never deasserted.
>>>
>>> The former causes interrupt timeouts and is detected by
>>> tpm_tis_core_init(). The latter results in interrupt storms.
>>>
>>> Recent reports concern the Lenovo ThinkStation P360 Tiny, Lenovo ThinkPad
>>> L490 and Inspur NF5180M6:
>>>
>>> https://lore.kernel.org/linux-integrity/20230511005403.24689-1-jsnitsel@redhat.com/
>>> https://lore.kernel.org/linux-integrity/d80b180a569a9f068d3a2614f062cfa3a78af5a6.camel@kernel.org/
>>>
>>> The current approach to avoid those storms is to disable interrupts by
>>> adding a DMI quirk for the concerned device.
>>>
>>> However this is a maintenance burden in the long run, so use a generic
>>> approach:
>>
>> I'm trying to comprehend how you evaluate, how big maintenance burden
>> this would be. Adding even a few dozen table entries is not a
>> maintenance burden.
>>
>> On the other hand any new functionality is objectively a maintanance
>> burden of some measure (applies to any functionality). So how do we know
>> that taking this change is less of a maintenance burden than just add
>> new table entries, as they come up?
> 
> I feel also a bit resistant because leaf driver framework is really
> a wrong location in the kernel tree for IRQ storm detection.
> 
> It would be better to have it signaled above the TPM driver, and the
> driver would then just act on it.
> 

I agree. But currently I do not see how to achieve this as there is no way
to let a driver be informed about a detected interrupt storm. So the only solution
I see for now is to implement it in the driver itself.

Regards,
Lino
  
Jerry Snitselaar May 23, 2023, 10:32 p.m. UTC | #20
On Tue, May 23, 2023 at 10:12:49PM +0300, Jarkko Sakkinen wrote:
> On Tue May 23, 2023 at 9:53 PM EEST, Jarkko Sakkinen wrote:
> > On Mon May 22, 2023 at 5:31 PM EEST, Lino Sanfilippo wrote:
> > > From: Lino Sanfilippo <l.sanfilippo@kunbus.com>
> > >
> > > Commit e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test") enabled
> > > interrupts instead of polling on all capable TPMs. Unfortunately, on some
> > > products the interrupt line is either never asserted or never deasserted.
> > >
> > > The former causes interrupt timeouts and is detected by
> > > tpm_tis_core_init(). The latter results in interrupt storms.
> > >
> > > Recent reports concern the Lenovo ThinkStation P360 Tiny, Lenovo ThinkPad
> > > L490 and Inspur NF5180M6:
> > >
> > > https://lore.kernel.org/linux-integrity/20230511005403.24689-1-jsnitsel@redhat.com/
> > > https://lore.kernel.org/linux-integrity/d80b180a569a9f068d3a2614f062cfa3a78af5a6.camel@kernel.org/
> > >
> > > The current approach to avoid those storms is to disable interrupts by
> > > adding a DMI quirk for the concerned device.
> > >
> > > However this is a maintenance burden in the long run, so use a generic
> > > approach:
> >
> > I'm trying to comprehend how you evaluate, how big maintenance burden
> > this would be. Adding even a few dozen table entries is not a
> > maintenance burden.

I do worry about how many cases will be reported once 6.4 is released,
and this eventually makes its way into distributions. In either case
the dmi table will need to be maintained. The UPX-11i case is a
different issue, and IIRC the L490 it needed a DMI entry, because
trying to catch the irq storm wasn't solving the issue there. I
imagine other odd cases will be popping up as well.

So far we have 2 irq storm reports with peterz's P360 Tiny, and I
guess that Inspur system reported by the kernel test robot. Then there
is whatever is going on with Peter Ujfalusi's UPX-11i.

> >
> > On the other hand any new functionality is objectively a maintanance
> > burden of some measure (applies to any functionality). So how do we know
> > that taking this change is less of a maintenance burden than just add
> > new table entries, as they come up?
> >
> > > Detect an interrupt storm by counting the number of unhandled interrupts
> > > within a 10 ms time interval. In case that more than 1000 were unhandled
> > > deactivate interrupts, deregister the handler and fall back to polling.
> >
> > I know it can be sometimes hard to evaluate but can you try to explain
> > how you came up to the 10 ms sampling period and 1000 interrupt
> > threshold? I just don't like abritrary numbers.
> 
> Also here I wonder how you came up with this computational model. This
> is not same as saying it is wrong. There's just whole stack of options.
> 
> Out of top of my head you could e.g. window average the duration between
> IRQs. When the average goes beyond threshold, then you shutdown
> interrupts.

Just to make sure I have it clear in my head, you mean when the
average is shorter than the threshold duration between interrupts,
yes? My brain wants to read 'When the average goes beyond threshold'
as 'threshold < average'.

Does the check need to be a rolling window like 1/2 currently has? I
expect that if the problem exists it will be noticed in the first
window checked. I think what I originally tried was to check over some
interval from when the handler first ran, disable interrupts if
needed, and then skip the check from then on when the handler ran.

Regards,
Jerry

> 
> The pro I would see in this that it is much easier intuitively discuss
> how much there should be time in-between interrupts that the kernel
> handles it, than how many IRQs you can stack into time interval, which
> blows my head tbh.
> 
> BR, Jarkko
  
Jarkko Sakkinen May 24, 2023, 1:21 a.m. UTC | #21
On Wed May 24, 2023 at 1:32 AM EEST, Jerry Snitselaar wrote:
> I do worry about how many cases will be reported once 6.4 is released,
> and this eventually makes its way into distributions. In either case
> the dmi table will need to be maintained. The UPX-11i case is a
> different issue, and IIRC the L490 it needed a DMI entry, because
> trying to catch the irq storm wasn't solving the issue there. I
> imagine other odd cases will be popping up as well.
>
> So far we have 2 irq storm reports with peterz's P360 Tiny, and I
> guess that Inspur system reported by the kernel test robot. Then there
> is whatever is going on with Peter Ujfalusi's UPX-11i.

Yeah, I agree that we need both in order to reach stability.

> > Out of top of my head you could e.g. window average the duration between
> > IRQs. When the average goes beyond threshold, then you shutdown
> > interrupts.
>
> Just to make sure I have it clear in my head, you mean when the
> average is shorter than the threshold duration between interrupts,
> yes? My brain wants to read 'When the average goes beyond threshold'
> as 'threshold < average'.
>
> Does the check need to be a rolling window like 1/2 currently has? I
> expect that if the problem exists it will be noticed in the first
> window checked. I think what I originally tried was to check over some
> interval from when the handler first ran, disable interrupts if
> needed, and then skip the check from then on when the handler ran.

How about just: average' = (average / (then - now)) /2

And if average' > thershold, disable interrupts.

BR, Jarkko
  
Jarkko Sakkinen May 24, 2023, 1:44 a.m. UTC | #22
On Tue May 23, 2023 at 10:46 PM EEST, Lukas Wunner wrote:
> On Tue, May 23, 2023 at 10:00:10PM +0300, Jarkko Sakkinen wrote:
> > I feel also a bit resistant because leaf driver framework is really
> > a wrong location in the kernel tree for IRQ storm detection.
> > 
> > It would be better to have it signaled above the TPM driver, and the
> > driver would then just act on it.
>
> That would require changing the logic in kernel/irq/spurious.c.
>
> At this point in the cycle, such a change would definitely not be
> eligible as a fix for v6.4.

No disagreeing with this. Just pointed it out.

BR, Jarkko
  
Jarkko Sakkinen May 24, 2023, 1:46 a.m. UTC | #23
On Tue May 23, 2023 at 10:37 PM EEST, Lukas Wunner wrote:
> > > +unhandled:
> > > +	tpm_tis_process_unhandled_interrupt(chip);
> > > +	return IRQ_HANDLED;
> > 
> > Shouldn't the return value be IRQ_NONE?
>
> No, absolutely not.  If you return IRQ_NONE here then genirq code
> will increase the spurious interrupt counter.  That's bad because
> the IRQ storm detection tpm_tis_core.c would race with the IRQ storm
> detection in genirq code:
>
> Note that disablement of the interrupt must happen in a work_struct
> here to avoid a deadlock. (The deadlock would occur because
> devm_free_irq() waits for the interrupt handler to finish.)
>
> Now, let's say the 1000 unhandled interrupts limit has been reached
> and the work_struct is scheduled.  If the work_struct isn't run
> quickly enough, you may reach the 99900 limit in note_interrupt()
> (see kernel/irq/spurious.c) and then genirq code will force the
> interrupt off completely.
>
> To avoid that you *have* to return IRQ_HANDLED here and thus pretend
> towards genirq code that the interrupt was not spurious.

This would deserve an inline comment.

> > >  struct tpm_tis_data {
> > > +	struct tpm_chip *chip;
> > >  	u16 manufacturer_id;
> > >  	struct mutex locality_count_mutex;
> > >  	unsigned int locality_count;
> > >  	int locality;
> > > +	/* Interrupts */
> > 
> > Not relevant change for a bug fix.
>
> But not harmful either, is it?

No but it is still spurious change in this context.

> Thanks,
>
> Lukas

BR, Jarkko
  
Jarkko Sakkinen May 24, 2023, 3:58 a.m. UTC | #24
Hi,

Sorry, some minor glitches.

On Mon May 22, 2023 at 5:31 PM EEST, Lino Sanfilippo wrote:
> From: Lino Sanfilippo <l.sanfilippo@kunbus.com>
>
> Commit e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test") enabled
> interrupts instead of polling on all capable TPMs. Unfortunately, on some
> products the interrupt line is either never asserted or never deasserted.

Use Reported-by and Closes tag and remove this paragraph.

In Closes link instead from lore the email where the bug was reported.

> The former causes interrupt timeouts and is detected by
> tpm_tis_core_init(). The latter results in interrupt storms.

Please describe instead the system where the bug was realized. Don't
worry about speculative descriptions. We only deal with ones actually
realized.

> Recent reports concern the Lenovo ThinkStation P360 Tiny, Lenovo ThinkPad
> L490 and Inspur NF5180M6:
>
> https://lore.kernel.org/linux-integrity/20230511005403.24689-1-jsnitsel@redhat.com/
> https://lore.kernel.org/linux-integrity/d80b180a569a9f068d3a2614f062cfa3a78af5a6.camel@kernel.org/

Please remove all of this, as the fixes have been handled. Let's keep
the commit message focused.

> The current approach to avoid those storms is to disable interrupts by
> adding a DMI quirk for the concerned device.
>
> However this is a maintenance burden in the long run, so use a generic
> approach:
>
> Detect an interrupt storm by counting the number of unhandled interrupts
> within a 10 ms time interval. In case that more than 1000 were unhandled
> deactivate interrupts, deregister the handler and fall back to polling.
>
> This equals the implementation that handles interrupt storms in
> note_interrupt() by means of timestamps and counters in struct irq_desc.
> However the function to access this structure is private so the logic has
> to be reimplemented in the TPM TIS core.

I only now found out that this is based on kernel/irq/spurious.c code
partly. Why this was unmentioned?

That would make this already more legitimate because it is based
on field tested metrics.

Then we only have to discuss about counter.

> routine trigger a worker thread that executes the unregistration.
>
> Suggested-by: Lukas Wunner <lukas@wunner.de>
> Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
> ---
>  drivers/char/tpm/tpm_tis_core.c | 71 +++++++++++++++++++++++++++++++--
>  drivers/char/tpm/tpm_tis_core.h |  6 +++
>  2 files changed, 74 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
> index 558144fa707a..458ebf8c2f16 100644
> --- a/drivers/char/tpm/tpm_tis_core.c
> +++ b/drivers/char/tpm/tpm_tis_core.c
> @@ -752,6 +752,55 @@ static bool tpm_tis_req_canceled(struct tpm_chip *chip, u8 status)
>  	return status == TPM_STS_COMMAND_READY;
>  }
>  
> +static void tpm_tis_handle_irq_storm(struct tpm_chip *chip)
> +{
> +	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
> +	int intmask = 0;
> +
> +	dev_err(&chip->dev, HW_ERR
> +		"TPM interrupt storm detected, polling instead\n");

Degrading this to warn is fine because it is legit behaviour in a
sense.

> +
> +	tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
> +
> +	intmask &= ~TPM_GLOBAL_INT_ENABLE;
> +
> +	tpm_tis_request_locality(chip, 0);
> +	tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
> +	tpm_tis_relinquish_locality(chip, 0);
> +
> +	chip->flags &= ~TPM_CHIP_FLAG_IRQ;
> +
> +	/*
> +	 * We must not call devm_free_irq() from within the interrupt handler,

Never use "we" form. Always use either:

1. Imperative
2. Passive

I.e. to address this, you would write instead "devm_free_irq() must not
be called within the interrupt handler because ...".

> +	 * since this function waits for running interrupt handlers to finish
> +	 * and thus it would deadlock. Instead trigger a worker that does the
> +	 * unregistration.
> +	 */
> +	schedule_work(&priv->free_irq_work);
> +}
> +
> +static void tpm_tis_process_unhandled_interrupt(struct tpm_chip *chip)
> +{
> +	const unsigned int MAX_UNHANDLED_IRQS = 1000;
> +	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);

Reverse order and add empty line.

> +	/*
> +	 * The worker to free the TPM interrupt (free_irq_work) may already
> +	 * be scheduled, so make sure it is not scheduled again.
> +	 */
> +	if (!(chip->flags & TPM_CHIP_FLAG_IRQ))
> +		return;
> +
> +	if (time_after(jiffies, priv->last_unhandled_irq + HZ/10))
> +		priv->unhandled_irqs = 1;
> +	else
> +		priv->unhandled_irqs++;
> +
> +	priv->last_unhandled_irq = jiffies;
> +
> +	if (priv->unhandled_irqs > MAX_UNHANDLED_IRQS)
> +		tpm_tis_handle_irq_storm(chip);

Why wouldn't we switch to polling mode even when there is a single
unhandled IRQ? 

> +}
> +
>  static irqreturn_t tis_int_handler(int dummy, void *dev_id)
>  {
>  	struct tpm_chip *chip = dev_id;
> @@ -761,10 +810,10 @@ static irqreturn_t tis_int_handler(int dummy, void *dev_id)
>  
>  	rc = tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &interrupt);
>  	if (rc < 0)
> -		return IRQ_NONE;
> +		goto unhandled;
>  
>  	if (interrupt == 0)
> -		return IRQ_NONE;
> +		goto unhandled;
>  
>  	set_bit(TPM_TIS_IRQ_TESTED, &priv->flags);
>  	if (interrupt & TPM_INTF_DATA_AVAIL_INT)
> @@ -780,10 +829,14 @@ static irqreturn_t tis_int_handler(int dummy, void *dev_id)
>  	rc = tpm_tis_write32(priv, TPM_INT_STATUS(priv->locality), interrupt);
>  	tpm_tis_relinquish_locality(chip, 0);
>  	if (rc < 0)
> -		return IRQ_NONE;
> +		goto unhandled;
>  
>  	tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &interrupt);
>  	return IRQ_HANDLED;
> +
> +unhandled:
> +	tpm_tis_process_unhandled_interrupt(chip);
> +	return IRQ_HANDLED;
>  }
>  
>  static void tpm_tis_gen_interrupt(struct tpm_chip *chip)
> @@ -804,6 +857,15 @@ static void tpm_tis_gen_interrupt(struct tpm_chip *chip)
>  		chip->flags &= ~TPM_CHIP_FLAG_IRQ;
>  }
>  
> +static void tpm_tis_free_irq_func(struct work_struct *work)
> +{
> +	struct tpm_tis_data *priv = container_of(work, typeof(*priv), free_irq_work);
> +	struct tpm_chip *chip = priv->chip;
> +
> +	devm_free_irq(chip->dev.parent, priv->irq, chip);
> +	priv->irq = 0;
> +}
> +
>  /* Register the IRQ and issue a command that will cause an interrupt. If an
>   * irq is seen then leave the chip setup for IRQ operation, otherwise reverse
>   * everything and leave in polling mode. Returns 0 on success.
> @@ -816,6 +878,7 @@ static int tpm_tis_probe_irq_single(struct tpm_chip *chip, u32 intmask,
>  	int rc;
>  	u32 int_status;
>  
> +	INIT_WORK(&priv->free_irq_work, tpm_tis_free_irq_func);
>  
>  	rc = devm_request_threaded_irq(chip->dev.parent, irq, NULL,
>  				       tis_int_handler, IRQF_ONESHOT | flags,
> @@ -918,6 +981,7 @@ void tpm_tis_remove(struct tpm_chip *chip)
>  		interrupt = 0;
>  
>  	tpm_tis_write32(priv, reg, ~TPM_GLOBAL_INT_ENABLE & interrupt);
> +	flush_work(&priv->free_irq_work);
>  
>  	tpm_tis_clkrun_enable(chip, false);
>  
> @@ -1021,6 +1085,7 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
>  	chip->timeout_b = msecs_to_jiffies(TIS_TIMEOUT_B_MAX);
>  	chip->timeout_c = msecs_to_jiffies(TIS_TIMEOUT_C_MAX);
>  	chip->timeout_d = msecs_to_jiffies(TIS_TIMEOUT_D_MAX);
> +	priv->chip = chip;
>  	priv->timeout_min = TPM_TIMEOUT_USECS_MIN;
>  	priv->timeout_max = TPM_TIMEOUT_USECS_MAX;
>  	priv->phy_ops = phy_ops;
> diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h
> index e978f457fd4d..6fc86baa4398 100644
> --- a/drivers/char/tpm/tpm_tis_core.h
> +++ b/drivers/char/tpm/tpm_tis_core.h
> @@ -91,12 +91,18 @@ enum tpm_tis_flags {
>  };
>  
>  struct tpm_tis_data {
> +	struct tpm_chip *chip;
>  	u16 manufacturer_id;
>  	struct mutex locality_count_mutex;
>  	unsigned int locality_count;
>  	int locality;
> +	/* Interrupts */
>  	int irq;
> +	struct work_struct free_irq_work;
> +	unsigned long last_unhandled_irq;
> +	unsigned int unhandled_irqs;
>  	unsigned int int_mask;
> +
>  	unsigned long flags;
>  	void __iomem *ilb_base_addr;
>  	u16 clkrun_enabled;
>
> base-commit: 44c026a73be8038f03dbdeef028b642880cf1511
> -- 
> 2.40.1

BR, Jarkko
  
Jarkko Sakkinen May 24, 2023, 3:59 a.m. UTC | #25
On Wed May 24, 2023 at 6:58 AM EEST, Jarkko Sakkinen wrote:
> Hi,
>
> Sorry, some minor glitches.
>
> On Mon May 22, 2023 at 5:31 PM EEST, Lino Sanfilippo wrote:
> > From: Lino Sanfilippo <l.sanfilippo@kunbus.com>
> >
> > Commit e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test") enabled
> > interrupts instead of polling on all capable TPMs. Unfortunately, on some
> > products the interrupt line is either never asserted or never deasserted.
>
> Use Reported-by and Closes tag and remove this paragraph.
>
> In Closes link instead from lore the email where the bug was reported.
>
> > The former causes interrupt timeouts and is detected by
> > tpm_tis_core_init(). The latter results in interrupt storms.
>
> Please describe instead the system where the bug was realized. Don't
> worry about speculative descriptions. We only deal with ones actually
> realized.
>
> > Recent reports concern the Lenovo ThinkStation P360 Tiny, Lenovo ThinkPad
> > L490 and Inspur NF5180M6:
> >
> > https://lore.kernel.org/linux-integrity/20230511005403.24689-1-jsnitsel@redhat.com/
> > https://lore.kernel.org/linux-integrity/d80b180a569a9f068d3a2614f062cfa3a78af5a6.camel@kernel.org/
>
> Please remove all of this, as the fixes have been handled. Let's keep
> the commit message focused.
>
> > The current approach to avoid those storms is to disable interrupts by
> > adding a DMI quirk for the concerned device.
> >
> > However this is a maintenance burden in the long run, so use a generic
> > approach:
> >
> > Detect an interrupt storm by counting the number of unhandled interrupts
> > within a 10 ms time interval. In case that more than 1000 were unhandled
> > deactivate interrupts, deregister the handler and fall back to polling.
> >
> > This equals the implementation that handles interrupt storms in
> > note_interrupt() by means of timestamps and counters in struct irq_desc.
> > However the function to access this structure is private so the logic has
> > to be reimplemented in the TPM TIS core.
>
> I only now found out that this is based on kernel/irq/spurious.c code
> partly. Why this was unmentioned?
>
> That would make this already more legitimate because it is based
> on field tested metrics.
>
> Then we only have to discuss about counter.
>
> > routine trigger a worker thread that executes the unregistration.
> >
> > Suggested-by: Lukas Wunner <lukas@wunner.de>
> > Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
> > ---
> >  drivers/char/tpm/tpm_tis_core.c | 71 +++++++++++++++++++++++++++++++--
> >  drivers/char/tpm/tpm_tis_core.h |  6 +++
> >  2 files changed, 74 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
> > index 558144fa707a..458ebf8c2f16 100644
> > --- a/drivers/char/tpm/tpm_tis_core.c
> > +++ b/drivers/char/tpm/tpm_tis_core.c
> > @@ -752,6 +752,55 @@ static bool tpm_tis_req_canceled(struct tpm_chip *chip, u8 status)
> >  	return status == TPM_STS_COMMAND_READY;
> >  }
> >  
> > +static void tpm_tis_handle_irq_storm(struct tpm_chip *chip)
> > +{
> > +	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
> > +	int intmask = 0;
> > +
> > +	dev_err(&chip->dev, HW_ERR
> > +		"TPM interrupt storm detected, polling instead\n");
>
> Degrading this to warn is fine because it is legit behaviour in a
> sense.
>
> > +
> > +	tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
> > +
> > +	intmask &= ~TPM_GLOBAL_INT_ENABLE;
> > +
> > +	tpm_tis_request_locality(chip, 0);
> > +	tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
> > +	tpm_tis_relinquish_locality(chip, 0);
> > +
> > +	chip->flags &= ~TPM_CHIP_FLAG_IRQ;
> > +
> > +	/*
> > +	 * We must not call devm_free_irq() from within the interrupt handler,
>
> Never use "we" form. Always use either:
>
> 1. Imperative
> 2. Passive
>
> I.e. to address this, you would write instead "devm_free_irq() must not
> be called within the interrupt handler because ...".
>
> > +	 * since this function waits for running interrupt handlers to finish
> > +	 * and thus it would deadlock. Instead trigger a worker that does the
> > +	 * unregistration.
> > +	 */
> > +	schedule_work(&priv->free_irq_work);
> > +}
> > +
> > +static void tpm_tis_process_unhandled_interrupt(struct tpm_chip *chip)
> > +{
> > +	const unsigned int MAX_UNHANDLED_IRQS = 1000;
> > +	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
>
> Reverse order and add empty line.
>
> > +	/*
> > +	 * The worker to free the TPM interrupt (free_irq_work) may already
> > +	 * be scheduled, so make sure it is not scheduled again.
> > +	 */
> > +	if (!(chip->flags & TPM_CHIP_FLAG_IRQ))
> > +		return;
> > +
> > +	if (time_after(jiffies, priv->last_unhandled_irq + HZ/10))
> > +		priv->unhandled_irqs = 1;
> > +	else
> > +		priv->unhandled_irqs++;
> > +
> > +	priv->last_unhandled_irq = jiffies;
> > +
> > +	if (priv->unhandled_irqs > MAX_UNHANDLED_IRQS)
> > +		tpm_tis_handle_irq_storm(chip);
>
> Why wouldn't we switch to polling mode even when there is a single
> unhandled IRQ? 
>
> > +}
> > +
> >  static irqreturn_t tis_int_handler(int dummy, void *dev_id)
> >  {
> >  	struct tpm_chip *chip = dev_id;
> > @@ -761,10 +810,10 @@ static irqreturn_t tis_int_handler(int dummy, void *dev_id)
> >  
> >  	rc = tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &interrupt);
> >  	if (rc < 0)
> > -		return IRQ_NONE;
> > +		goto unhandled;
> >  
> >  	if (interrupt == 0)
> > -		return IRQ_NONE;
> > +		goto unhandled;
> >  
> >  	set_bit(TPM_TIS_IRQ_TESTED, &priv->flags);
> >  	if (interrupt & TPM_INTF_DATA_AVAIL_INT)
> > @@ -780,10 +829,14 @@ static irqreturn_t tis_int_handler(int dummy, void *dev_id)
> >  	rc = tpm_tis_write32(priv, TPM_INT_STATUS(priv->locality), interrupt);
> >  	tpm_tis_relinquish_locality(chip, 0);
> >  	if (rc < 0)
> > -		return IRQ_NONE;
> > +		goto unhandled;
> >  
> >  	tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &interrupt);
> >  	return IRQ_HANDLED;
> > +
> > +unhandled:
> > +	tpm_tis_process_unhandled_interrupt(chip);
> > +	return IRQ_HANDLED;
> >  }
> >  
> >  static void tpm_tis_gen_interrupt(struct tpm_chip *chip)
> > @@ -804,6 +857,15 @@ static void tpm_tis_gen_interrupt(struct tpm_chip *chip)
> >  		chip->flags &= ~TPM_CHIP_FLAG_IRQ;
> >  }
> >  
> > +static void tpm_tis_free_irq_func(struct work_struct *work)
> > +{
> > +	struct tpm_tis_data *priv = container_of(work, typeof(*priv), free_irq_work);
> > +	struct tpm_chip *chip = priv->chip;
> > +
> > +	devm_free_irq(chip->dev.parent, priv->irq, chip);
> > +	priv->irq = 0;
> > +}
> > +
> >  /* Register the IRQ and issue a command that will cause an interrupt. If an
> >   * irq is seen then leave the chip setup for IRQ operation, otherwise reverse
> >   * everything and leave in polling mode. Returns 0 on success.
> > @@ -816,6 +878,7 @@ static int tpm_tis_probe_irq_single(struct tpm_chip *chip, u32 intmask,
> >  	int rc;
> >  	u32 int_status;
> >  
> > +	INIT_WORK(&priv->free_irq_work, tpm_tis_free_irq_func);
> >  
> >  	rc = devm_request_threaded_irq(chip->dev.parent, irq, NULL,
> >  				       tis_int_handler, IRQF_ONESHOT | flags,
> > @@ -918,6 +981,7 @@ void tpm_tis_remove(struct tpm_chip *chip)
> >  		interrupt = 0;
> >  
> >  	tpm_tis_write32(priv, reg, ~TPM_GLOBAL_INT_ENABLE & interrupt);
> > +	flush_work(&priv->free_irq_work);
> >  
> >  	tpm_tis_clkrun_enable(chip, false);
> >  
> > @@ -1021,6 +1085,7 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
> >  	chip->timeout_b = msecs_to_jiffies(TIS_TIMEOUT_B_MAX);
> >  	chip->timeout_c = msecs_to_jiffies(TIS_TIMEOUT_C_MAX);
> >  	chip->timeout_d = msecs_to_jiffies(TIS_TIMEOUT_D_MAX);
> > +	priv->chip = chip;
> >  	priv->timeout_min = TPM_TIMEOUT_USECS_MIN;
> >  	priv->timeout_max = TPM_TIMEOUT_USECS_MAX;
> >  	priv->phy_ops = phy_ops;
> > diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h
> > index e978f457fd4d..6fc86baa4398 100644
> > --- a/drivers/char/tpm/tpm_tis_core.h
> > +++ b/drivers/char/tpm/tpm_tis_core.h
> > @@ -91,12 +91,18 @@ enum tpm_tis_flags {
> >  };
> >  
> >  struct tpm_tis_data {
> > +	struct tpm_chip *chip;
> >  	u16 manufacturer_id;
> >  	struct mutex locality_count_mutex;
> >  	unsigned int locality_count;
> >  	int locality;
> > +	/* Interrupts */
> >  	int irq;
> > +	struct work_struct free_irq_work;
> > +	unsigned long last_unhandled_irq;
> > +	unsigned int unhandled_irqs;
> >  	unsigned int int_mask;
> > +
> >  	unsigned long flags;
> >  	void __iomem *ilb_base_addr;
> >  	u16 clkrun_enabled;
> >
> > base-commit: 44c026a73be8038f03dbdeef028b642880cf1511
> > -- 
> > 2.40.1

I added 'irq-storm' branch where I have the latest fixes:

git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd.git

All known DMI table updates are now afaik in the mainline.

BR, Jarkko
  
Lukas Wunner May 24, 2023, 7:29 a.m. UTC | #26
On Wed, May 24, 2023 at 06:58:08AM +0300, Jarkko Sakkinen wrote:
> On Mon May 22, 2023 at 5:31 PM EEST, Lino Sanfilippo wrote:
> > +	/*
> > +	 * The worker to free the TPM interrupt (free_irq_work) may already
> > +	 * be scheduled, so make sure it is not scheduled again.
> > +	 */
> > +	if (!(chip->flags & TPM_CHIP_FLAG_IRQ))
> > +		return;
> > +
> > +	if (time_after(jiffies, priv->last_unhandled_irq + HZ/10))
> > +		priv->unhandled_irqs = 1;
> > +	else
> > +		priv->unhandled_irqs++;
> > +
> > +	priv->last_unhandled_irq = jiffies;
> > +
> > +	if (priv->unhandled_irqs > MAX_UNHANDLED_IRQS)
> > +		tpm_tis_handle_irq_storm(chip);
> 
> Why wouldn't we switch to polling mode even when there is a single
> unhandled IRQ?

An unhandled IRQ can be legitimate if the interrupt is shared
with other devices and the IRQ was raised by one of them.

So you only want to switch to polling if there's a significant
amount of unhandled IRQs in a short period of time.

Thanks,

Lukas
  
Hans de Goede May 24, 2023, 9:08 a.m. UTC | #27
Hi Lukas,

On 5/23/23 17:16, Lukas Wunner wrote:
> On Tue, May 23, 2023 at 12:14:28PM +0300, Péter Ujfalusi wrote:
>> On 23/05/2023 10:44, Lukas Wunner wrote:

<snip>

>>> The corresponding message emitted in tpm_tis_core_init() for
>>> an interrupt that's *never* asserted uses dev_err(), so using
>>> dev_err() here as well serves consistency:
>>>
>>> 	dev_err(&chip->dev, FW_BUG
>>> 		"TPM interrupt not working, polling instead\n");
>>>
>>> That way the same severity is used both for the never asserted and
>>> the never deasserted interrupt case.
>>
>> Oh, OK.
>> Is there anything the user can do to have a ERROR less boot?
> 
> You're right that the user can't do anything about it and that
> toning the message down to KERN_WARN or even KERN_NOTICE severity
> may be appropriate.
> 
> However the above-quoted message for the never asserted interrupt
> in tpm_tis_core_init() should then likewise be toned down to the
> same severity.
> 
> I'm wondering why that message uses FW_BUG.  That doesn't make any
> sense to me.  It's typically not a firmware bug, but a hardware issue,
> e.g. an interrupt pin may erroneously not be connected or may be
> connected to ground.  Lino used HW_ERR, which seems more appropriate
> to me.

This issue seems to have mostly been seen on x86/ACPI systems and
the issue seems to mostly be a misconfiguration of the IOAPIC
(e.g. wrong trigger type).

Besides this, the IRQ info always comes from either the ACPI tables
or from devicetree both of which are firmware and if the IRQ does not
work on a specific board then the firmware should simply not provide
any IRQ info to the driver rather the pointing to a broken IRQ.

Hence my suggestion to use dev_warn(dev, FW_BUG "....", ...);

Regards,

Hans
  
Jarkko Sakkinen May 24, 2023, 3:30 p.m. UTC | #28
On Wed May 24, 2023 at 6:58 AM EEST, Jarkko Sakkinen wrote:
> >  	rc = tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &interrupt);
> >  	if (rc < 0)
> > -		return IRQ_NONE;
> > +		goto unhandled;
> >  
> >  	if (interrupt == 0)
> > -		return IRQ_NONE;
> > +		goto unhandled;
> >  
> >  	set_bit(TPM_TIS_IRQ_TESTED, &priv->flags);
> >  	if (interrupt & TPM_INTF_DATA_AVAIL_INT)
> > @@ -780,10 +829,14 @@ static irqreturn_t tis_int_handler(int dummy, void *dev_id)
> >  	rc = tpm_tis_write32(priv, TPM_INT_STATUS(priv->locality), interrupt);
> >  	tpm_tis_relinquish_locality(chip, 0);
> >  	if (rc < 0)
> > -		return IRQ_NONE;
> > +		goto unhandled;
> >  
> >  	tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &interrupt);
> >  	return IRQ_HANDLED;
> > +
> > +unhandled:
> > +	tpm_tis_process_unhandled_interrupt(chip);
> > +	return IRQ_HANDLED;
> >  }

Some minor glitches I noticed.

You could simplify the flow by making the helper to return IRQ_NONE.

E.g. 

	tpm_tis_relinquish_locality(chip, 0);
	if (rc < 0)
		return tpm_tis_process_unhandled_interrupt(chip);

I'd recommend changing the function name simply tpm_tis_rollback_interrupt().

Also tpm_tis_handle_irq_storm() is a pretty bad function name 
because handle also can mean anything. You are resetting to the
polling mode, right?

So perhaps that could be e.g. tpm_tis_reenable_polling? I'm open
for any other name but it really needs to give a hint what the
function does.

BR, Jarkko
  
Lino Sanfilippo May 25, 2023, 11:45 p.m. UTC | #29
Hi,

On 24.05.23 05:58, Jarkko Sakkinen wrote:

>> Commit e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test") enabled
>> interrupts instead of polling on all capable TPMs. Unfortunately, on some
>> products the interrupt line is either never asserted or never deasserted.
> 
> Use Reported-by and Closes tag and remove this paragraph.
> 
> In Closes link instead from lore the email where the bug was reported.

Ok

> 
>> The former causes interrupt timeouts and is detected by
>> tpm_tis_core_init(). The latter results in interrupt storms.
> 
> Please describe instead the system where the bug was realized. Don't
> worry about speculative descriptions. We only deal with ones actually
> realized.
> 
>> Recent reports concern the Lenovo ThinkStation P360 Tiny, Lenovo ThinkPad
>> L490 and Inspur NF5180M6:
>>
>> https://lore.kernel.org/linux-integrity/20230511005403.24689-1-jsnitsel@redhat.com/
>> https://lore.kernel.org/linux-integrity/d80b180a569a9f068d3a2614f062cfa3a78af5a6.camel@kernel.org/
> 
> Please remove all of this, as the fixes have been handled. Let's keep
> the commit message focused.
> 

Ok.

>> The current approach to avoid those storms is to disable interrupts by
>> adding a DMI quirk for the concerned device.
>>
>> However this is a maintenance burden in the long run, so use a generic
>> approach:
>>
>> Detect an interrupt storm by counting the number of unhandled interrupts
>> within a 10 ms time interval. In case that more than 1000 were unhandled
>> deactivate interrupts, deregister the handler and fall back to polling.
>>
>> This equals the implementation that handles interrupt storms in
>> note_interrupt() by means of timestamps and counters in struct irq_desc.
>> However the function to access this structure is private so the logic has
>> to be reimplemented in the TPM TIS core.
> 
> I only now found out that this is based on kernel/irq/spurious.c code
> partly. Why this was unmentioned?
> 
> That would make this already more legitimate because it is based
> on field tested metrics.
>> Then we only have to discuss about counter.

I mentioned this in one of my responses:
https://lore.kernel.org/all/da435e0d-5f22-fac7-bc10-96a0fd4c6d54@kunbus.com/

> 
>> routine trigger a worker thread that executes the unregistration.
>>
>> Suggested-by: Lukas Wunner <lukas@wunner.de>
>> Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
>> ---
>>  drivers/char/tpm/tpm_tis_core.c | 71 +++++++++++++++++++++++++++++++--
>>  drivers/char/tpm/tpm_tis_core.h |  6 +++
>>  2 files changed, 74 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
>> index 558144fa707a..458ebf8c2f16 100644
>> --- a/drivers/char/tpm/tpm_tis_core.c
>> +++ b/drivers/char/tpm/tpm_tis_core.c
>> @@ -752,6 +752,55 @@ static bool tpm_tis_req_canceled(struct tpm_chip *chip, u8 status)
>>       return status == TPM_STS_COMMAND_READY;
>>  }
>>
>> +static void tpm_tis_handle_irq_storm(struct tpm_chip *chip)
>> +{
>> +     struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
>> +     int intmask = 0;
>> +
>> +     dev_err(&chip->dev, HW_ERR
>> +             "TPM interrupt storm detected, polling instead\n");
> 
> Degrading this to warn is fine because it is legit behaviour in a
> sense.
> 

Agreed.

>> +
>> +     tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
>> +
>> +     intmask &= ~TPM_GLOBAL_INT_ENABLE;
>> +
>> +     tpm_tis_request_locality(chip, 0);
>> +     tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
>> +     tpm_tis_relinquish_locality(chip, 0);
>> +
>> +     chip->flags &= ~TPM_CHIP_FLAG_IRQ;
>> +
>> +     /*
>> +      * We must not call devm_free_irq() from within the interrupt handler,
> 
> Never use "we" form. Always use either:
> 
> 1. Imperative
> 2. Passive
> 
> I.e. to address this, you would write instead "devm_free_irq() must not
> be called within the interrupt handler because ...".
> 

Ok.

>> +      * since this function waits for running interrupt handlers to finish
>> +      * and thus it would deadlock. Instead trigger a worker that does the
>> +      * unregistration.
>> +      */
>> +     schedule_work(&priv->free_irq_work);
>> +}
>> +
>> +static void tpm_tis_process_unhandled_interrupt(struct tpm_chip *chip)
>> +{
>> +     const unsigned int MAX_UNHANDLED_IRQS = 1000;
>> +     struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
> 
> Reverse order and add empty line.
> 

Ok.

>> +     /*
>> +      * The worker to free the TPM interrupt (free_irq_work) may already
>> +      * be scheduled, so make sure it is not scheduled again.
>> +      */
>> +     if (!(chip->flags & TPM_CHIP_FLAG_IRQ))
>> +             return;
>> +
>> +     if (time_after(jiffies, priv->last_unhandled_irq + HZ/10))
>> +             priv->unhandled_irqs = 1;
>> +     else
>> +             priv->unhandled_irqs++;
>> +
>> +     priv->last_unhandled_irq = jiffies;
>> +
>> +     if (priv->unhandled_irqs > MAX_UNHANDLED_IRQS)
>> +             tpm_tis_handle_irq_storm(chip);
> 
> Why wouldn't we switch to polling mode even when there is a single
> unhandled IRQ?
> 

As Lukas wrote, not handling an interrupt may be legit if it was raised
by a device that shares the interrupt line with the TPM.

Regards,
Lino
  
Lino Sanfilippo May 26, 2023, 12:37 a.m. UTC | #30
On 24.05.23 17:30, Jarkko Sakkinen wrote:
> ATTENTION: This e-mail is from an external sender. Please check attachments and links before opening e.g. with mouseover.
> 
> 
> On Wed May 24, 2023 at 6:58 AM EEST, Jarkko Sakkinen wrote:
>>>     rc = tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &interrupt);
>>>     if (rc < 0)
>>> -           return IRQ_NONE;
>>> +           goto unhandled;
>>>
>>>     if (interrupt == 0)
>>> -           return IRQ_NONE;
>>> +           goto unhandled;
>>>
>>>     set_bit(TPM_TIS_IRQ_TESTED, &priv->flags);
>>>     if (interrupt & TPM_INTF_DATA_AVAIL_INT)
>>> @@ -780,10 +829,14 @@ static irqreturn_t tis_int_handler(int dummy, void *dev_id)
>>>     rc = tpm_tis_write32(priv, TPM_INT_STATUS(priv->locality), interrupt);
>>>     tpm_tis_relinquish_locality(chip, 0);
>>>     if (rc < 0)
>>> -           return IRQ_NONE;
>>> +           goto unhandled;
>>>
>>>     tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &interrupt);
>>>     return IRQ_HANDLED;
>>> +
>>> +unhandled:
>>> +   tpm_tis_process_unhandled_interrupt(chip);
>>> +   return IRQ_HANDLED;
>>>  }
> 
> Some minor glitches I noticed.
> 
> You could simplify the flow by making the helper to return IRQ_NONE.
> 
> E.g.
> 
>         tpm_tis_relinquish_locality(chip, 0);
>         if (rc < 0)
>                 return tpm_tis_process_unhandled_interrupt(chip);

Agreed, this way we could spare a few lines in the interrupt handler (but note
that the implementation only returns IRQ_HANDLED never IRQ_NONE. This is to prevent
the generic irq code from doing its own interrupt storm handling before the TPM driver
had a chance to fall back to polling).

> 
> I'd recommend changing the function name simply tpm_tis_rollback_interrupt().

> Also tpm_tis_handle_irq_storm() is a pretty bad function name
> because handle also can mean anything. You are resetting to the
> polling mode, right?
> 
> So perhaps that could be e.g. tpm_tis_reenable_polling? I'm open
> for any other name but it really needs to give a hint what the
> function does.

tpm_tis_reenable_polling() sounds good to me.


Regards,
Lino
  
Péter Ujfalusi May 29, 2023, 6:46 a.m. UTC | #31
Hi Lino,

On 23/05/2023 23:46, Lino Sanfilippo wrote:
>> On the other hand any new functionality is objectively a maintanance
>> burden of some measure (applies to any functionality). So how do we know
>> that taking this change is less of a maintenance burden than just add
>> new table entries, as they come up?
>>
> 
> Initially this set was created as a response to this 0-day bug report which you asked me
> to have a look at:
> 
> https://lore.kernel.org/linux-integrity/d80b180a569a9f068d3a2614f062cfa3a78af5a6.camel@kernel.org/
> 
> My hope was that it could also avoid some of (existing or future) DMI entries. But even if it does not
> (e.g. the problem Péter Ujfalusi reported with the UPX-i11 cannot be fixed by this patch set and thus
> needs the DMI quirk) we may at least avoid more bug reports due to interrupt storms once
> 6.4 is released. 

I'm surprised that there is a need for a storm detection in the first
place... Do we have something else on the same IRQ line on the affected
devices which might have a bug or no driver at all?
It is hard to believe that a TPM (Trusted Platform Module) is integrated
so poorly ;)

But put that aside: I think the storm detection is good given that there
is no other way to know which machine have sloppy TPM integration.
There are machines where this happens, so it is a know integration
issue, right?

My only 'nitpick' is with the printk level to be used.
The ERR level is not correct as we know the issue and we handle it, so
all is under control.
If we want to add these machines to the quirk list then WARN is a good
level to gain attention but I'm not sure if a user will know how to get
the machine in the quirk (where to file a bug).
If we only want the quirk to be used for machines like UPX-i11 which
simply just have broken (likely floating) IRQ line then the WARN is too
high level, INFO or even DBG would be appropriate as you are not going
to update the quirk, it is just handled under the hood (which is a great
thing, but on the other hand you will have the storm never the less and
that is not a nice thing).

It is a matter on how this is going to be handled in a long term. Add
quirk for all the known machines with either stormy or plain broken IRQ
line or handle the stormy ones and quirk the broken ones only.

>>> Detect an interrupt storm by counting the number of unhandled interrupts
>>> within a 10 ms time interval. In case that more than 1000 were unhandled
>>> deactivate interrupts, deregister the handler and fall back to polling.
>>
>> I know it can be sometimes hard to evaluate but can you try to explain
>> how you came up to the 10 ms sampling period and 1000 interrupt
>> threshold? I just don't like abritrary numbers.
> 
> At least the 100 ms is not plucked out of thin air but its the same time period
> that the generic code in note_interrupt() uses - I assume for a good reason.
> Not only this number but the whole irq storm detection logic is taken from 
> there: 
> 
>>
>>> This equals the implementation that handles interrupt storms in
>>> note_interrupt() by means of timestamps and counters in struct irq_desc.
>> The number of 1000 unhandled interrupts is still far below the 99900
used in
> note_interrupt() but IMHO enough to indicate that there is something seriously
> wrong with interrupt processing and it is probably saver to fall back to polling.

Except that if the line got the spurious designation in core, the
interrupt line will be disabled while the TPM driver will think that it
is still using IRQ mode and will not switch to polling.

A storm of 1000 is better than a storm of 99900 for sure but quirking
these would be the desired final solution. imho

There are many buts around this ;)
  
Michael Niewöhner May 29, 2023, 10:44 a.m. UTC | #32
On Tue, 2023-05-23 at 17:16 +0200, Lukas Wunner wrote:
> > > > > +       dev_err(&chip->dev, HW_ERR
> > > > > +               "TPM interrupt storm detected, polling instead\n");
> > > > 
> > > > Should this be dev_warn or even dev_info level?
> > > 
> > > The corresponding message emitted in tpm_tis_core_init() for
> > > an interrupt that's *never* asserted uses dev_err(), so using
> > > dev_err() here as well serves consistency:
> > > 
> > >         dev_err(&chip->dev, FW_BUG
> > >                 "TPM interrupt not working, polling instead\n");
> > > 
> > > That way the same severity is used both for the never asserted and
> > > the never deasserted interrupt case.
> > 
> > Oh, OK.
> > Is there anything the user can do to have a ERROR less boot?
> 
> You're right that the user can't do anything about it and that
> toning the message down to KERN_WARN or even KERN_NOTICE severity
> may be appropriate.
> 
> However the above-quoted message for the never asserted interrupt
> in tpm_tis_core_init() should then likewise be toned down to the
> same severity.
> 
> I'm wondering why that message uses FW_BUG.  That doesn't make any
> sense to me.  It's typically not a firmware bug, but a hardware issue,
> e.g. an interrupt pin may erroneously not be connected or may be
> connected to ground.  Lino used HW_ERR, which seems more appropriate
> to me.

Firmware is responsible for configuring gpios and interrupts correctly,
independently of it being a design decision or a mistake. AIUI any interrupt
storm could be prevented by firmware in any case by simply disabling that
interrupt. Thus, FW_BUG is the right thing to use here IMO.
  
Lino Sanfilippo May 29, 2023, 1:15 p.m. UTC | #33
Hi Péter,

On 29.05.23 at 08:46, Péter Ujfalusi wrote:

>> My hope was that it could also avoid some of (existing or future) DMI entries. But even if it does not
>> (e.g. the problem Péter Ujfalusi reported with the UPX-i11 cannot be fixed by this patch set and thus
>> needs the DMI quirk) we may at least avoid more bug reports due to interrupt storms once
>> 6.4 is released.
>
> I'm surprised that there is a need for a storm detection in the first
> place... Do we have something else on the same IRQ line on the affected
> devices which might have a bug or no driver at all?
> It is hard to believe that a TPM (Trusted Platform Module) is integrated
> so poorly ;)
>
> But put that aside: I think the storm detection is good given that there
> is no other way to know which machine have sloppy TPM integration.
> There are machines where this happens, so it is a know integration
> issue, right?
>> My only 'nitpick' is with the printk level to be used.
> The ERR level is not correct as we know the issue and we handle it, so
> all is under control.
> If we want to add these machines to the quirk list then WARN is a good
> level to gain attention but I'm not sure if a user will know how to get
> the machine in the quirk (where to file a bug).
> If we only want the quirk to be used for machines like UPX-i11 which
> simply just have broken (likely floating) IRQ line then the WARN is too
> high level, INFO or even DBG would be appropriate as you are not going
> to update the quirk, it is just handled under the hood (which is a great
> thing, but on the other hand you will have the storm never the less and
> that is not a nice thing).
>
> It is a matter on how this is going to be handled in a long term. Add
> quirk for all the known machines with either stormy or plain broken IRQ
> line or handle the stormy ones and quirk the broken ones only.
>

Even in the long run I would always prefer a generic solution whenever it
is possible. Quirks are fine for issues that cant be solved in another way
or really require individual treatment.
While I agree that ERR is not a good choice for the "falling back to polling"
message I do not have a strong opinion on whether WARN, NOTICE or INFO is more
appropriate. Jarko seems to prefer WARN.


>>>> Detect an interrupt storm by counting the number of unhandled interrupts
>>>> within a 10 ms time interval. In case that more than 1000 were unhandled
>>>> deactivate interrupts, deregister the handler and fall back to polling.
>>>
>>> I know it can be sometimes hard to evaluate but can you try to explain
>>> how you came up to the 10 ms sampling period and 1000 interrupt
>>> threshold? I just don't like abritrary numbers.
>>
>> At least the 100 ms is not plucked out of thin air but its the same time period
>> that the generic code in note_interrupt() uses - I assume for a good reason.
>> Not only this number but the whole irq storm detection logic is taken from
>> there:
>>
>>>
>>>> This equals the implementation that handles interrupt storms in
>>>> note_interrupt() by means of timestamps and counters in struct irq_desc.
>>> The number of 1000 unhandled interrupts is still far below the 99900
> used in
>> note_interrupt() but IMHO enough to indicate that there is something seriously
>> wrong with interrupt processing and it is probably saver to fall back to polling.
>
> Except that if the line got the spurious designation in core, the
> interrupt line will be disabled while the TPM driver will think that it
> is still using IRQ mode and will not switch to polling.

In the case that an interrupt storm cant be detected (since there might not even
be one) I am fine with adding a quirk.

>
> A storm of 1000 is better than a storm of 99900 for sure but quirking
> these would be the desired final solution. imho
>
As I wrote above I prefer a generic solution whenever possible.

> There are many buts around this ;)
>


Regards,
Lino
  
Lino Sanfilippo May 30, 2023, 10:31 a.m. UTC | #34
On 24.05.23 at 17:30, Jarkko Sakkinen wrote:
> On Wed May 24, 2023 at 6:58 AM EEST, Jarkko Sakkinen wrote:
>>>  	rc = tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &interrupt);
>>>  	if (rc < 0)
>>> -		return IRQ_NONE;
>>> +		goto unhandled;
>>>
>>>  	if (interrupt == 0)
>>> -		return IRQ_NONE;
>>> +		goto unhandled;
>>>
>>>  	set_bit(TPM_TIS_IRQ_TESTED, &priv->flags);
>>>  	if (interrupt & TPM_INTF_DATA_AVAIL_INT)
>>> @@ -780,10 +829,14 @@ static irqreturn_t tis_int_handler(int dummy, void *dev_id)
>>>  	rc = tpm_tis_write32(priv, TPM_INT_STATUS(priv->locality), interrupt);
>>>  	tpm_tis_relinquish_locality(chip, 0);
>>>  	if (rc < 0)
>>> -		return IRQ_NONE;
>>> +		goto unhandled;
>>>
>>>  	tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &interrupt);
>>>  	return IRQ_HANDLED;
>>> +
>>> +unhandled:
>>> +	tpm_tis_process_unhandled_interrupt(chip);
>>> +	return IRQ_HANDLED;
>>>  }
>
> Some minor glitches I noticed.
>
> You could simplify the flow by making the helper to return IRQ_NONE.
>
> E.g.
>
> 	tpm_tis_relinquish_locality(chip, 0);
> 	if (rc < 0)
> 		return tpm_tis_process_unhandled_interrupt(chip);
>
> I'd recommend changing the function name simply tpm_tis_rollback_interrupt().
>

IMHO this name is worse, since this function does actually _not_ rollback interrupts
most of the times it is called. Only after an interrupt storm is detected (so currently
after it has been called at least 1000 times without rollback) it actually
rolls back interrupts and falls back to polling.

Maybe rather tpm_tis_check_for_interrupt_storm()?

Regards,
Lino
  
Jerry Snitselaar May 30, 2023, 5:56 p.m. UTC | #35
On Mon, May 29, 2023 at 09:46:08AM +0300, Péter Ujfalusi wrote:
> Hi Lino,
> 
> On 23/05/2023 23:46, Lino Sanfilippo wrote:
> >> On the other hand any new functionality is objectively a maintanance
> >> burden of some measure (applies to any functionality). So how do we know
> >> that taking this change is less of a maintenance burden than just add
> >> new table entries, as they come up?
> >>
> > 
> > Initially this set was created as a response to this 0-day bug report which you asked me
> > to have a look at:
> > 
> > https://lore.kernel.org/linux-integrity/d80b180a569a9f068d3a2614f062cfa3a78af5a6.camel@kernel.org/
> > 
> > My hope was that it could also avoid some of (existing or future) DMI entries. But even if it does not
> > (e.g. the problem Péter Ujfalusi reported with the UPX-i11 cannot be fixed by this patch set and thus
> > needs the DMI quirk) we may at least avoid more bug reports due to interrupt storms once
> > 6.4 is released. 
> 
> I'm surprised that there is a need for a storm detection in the first
> place... Do we have something else on the same IRQ line on the affected
> devices which might have a bug or no driver at all?
> It is hard to believe that a TPM (Trusted Platform Module) is integrated
> so poorly ;)
> 
> But put that aside: I think the storm detection is good given that there
> is no other way to know which machine have sloppy TPM integration.
> There are machines where this happens, so it is a know integration
> issue, right?
> 
> My only 'nitpick' is with the printk level to be used.
> The ERR level is not correct as we know the issue and we handle it, so
> all is under control.
> If we want to add these machines to the quirk list then WARN is a good
> level to gain attention but I'm not sure if a user will know how to get
> the machine in the quirk (where to file a bug).
> If we only want the quirk to be used for machines like UPX-i11 which
> simply just have broken (likely floating) IRQ line then the WARN is too
> high level, INFO or even DBG would be appropriate as you are not going
> to update the quirk, it is just handled under the hood (which is a great
> thing, but on the other hand you will have the storm never the less and
> that is not a nice thing).
> 
> It is a matter on how this is going to be handled in a long term. Add
> quirk for all the known machines with either stormy or plain broken IRQ
> line or handle the stormy ones and quirk the broken ones only.
> 
> >>> Detect an interrupt storm by counting the number of unhandled interrupts
> >>> within a 10 ms time interval. In case that more than 1000 were unhandled
> >>> deactivate interrupts, deregister the handler and fall back to polling.
> >>
> >> I know it can be sometimes hard to evaluate but can you try to explain
> >> how you came up to the 10 ms sampling period and 1000 interrupt
> >> threshold? I just don't like abritrary numbers.
> > 
> > At least the 100 ms is not plucked out of thin air but its the same time period
> > that the generic code in note_interrupt() uses - I assume for a good reason.
> > Not only this number but the whole irq storm detection logic is taken from 
> > there: 
> > 
> >>
> >>> This equals the implementation that handles interrupt storms in
> >>> note_interrupt() by means of timestamps and counters in struct irq_desc.
> >> The number of 1000 unhandled interrupts is still far below the 99900
> used in
> > note_interrupt() but IMHO enough to indicate that there is something seriously
> > wrong with interrupt processing and it is probably saver to fall back to polling.
> 
> Except that if the line got the spurious designation in core, the
> interrupt line will be disabled while the TPM driver will think that it
> is still using IRQ mode and will not switch to polling.
> 
> A storm of 1000 is better than a storm of 99900 for sure but quirking
> these would be the desired final solution. imho

If that is the case, then output could probably be sent to the console
detailing the dmi info needed to update the table.

Regards,
Jerry

> 
> There are many buts around this ;)
> 
> -- 
> Péter
  
Jarkko Sakkinen June 6, 2023, 4:35 p.m. UTC | #36
On Tue May 30, 2023 at 8:56 PM EEST, Jerry Snitselaar wrote:
> On Mon, May 29, 2023 at 09:46:08AM +0300, Péter Ujfalusi wrote:
> > Hi Lino,
> > 
> > On 23/05/2023 23:46, Lino Sanfilippo wrote:
> > >> On the other hand any new functionality is objectively a maintanance
> > >> burden of some measure (applies to any functionality). So how do we know
> > >> that taking this change is less of a maintenance burden than just add
> > >> new table entries, as they come up?
> > >>
> > > 
> > > Initially this set was created as a response to this 0-day bug report which you asked me
> > > to have a look at:
> > > 
> > > https://lore.kernel.org/linux-integrity/d80b180a569a9f068d3a2614f062cfa3a78af5a6.camel@kernel.org/
> > > 
> > > My hope was that it could also avoid some of (existing or future) DMI entries. But even if it does not
> > > (e.g. the problem Péter Ujfalusi reported with the UPX-i11 cannot be fixed by this patch set and thus
> > > needs the DMI quirk) we may at least avoid more bug reports due to interrupt storms once
> > > 6.4 is released. 
> > 
> > I'm surprised that there is a need for a storm detection in the first
> > place... Do we have something else on the same IRQ line on the affected
> > devices which might have a bug or no driver at all?
> > It is hard to believe that a TPM (Trusted Platform Module) is integrated
> > so poorly ;)
> > 
> > But put that aside: I think the storm detection is good given that there
> > is no other way to know which machine have sloppy TPM integration.
> > There are machines where this happens, so it is a know integration
> > issue, right?
> > 
> > My only 'nitpick' is with the printk level to be used.
> > The ERR level is not correct as we know the issue and we handle it, so
> > all is under control.
> > If we want to add these machines to the quirk list then WARN is a good
> > level to gain attention but I'm not sure if a user will know how to get
> > the machine in the quirk (where to file a bug).
> > If we only want the quirk to be used for machines like UPX-i11 which
> > simply just have broken (likely floating) IRQ line then the WARN is too
> > high level, INFO or even DBG would be appropriate as you are not going
> > to update the quirk, it is just handled under the hood (which is a great
> > thing, but on the other hand you will have the storm never the less and
> > that is not a nice thing).
> > 
> > It is a matter on how this is going to be handled in a long term. Add
> > quirk for all the known machines with either stormy or plain broken IRQ
> > line or handle the stormy ones and quirk the broken ones only.
> > 
> > >>> Detect an interrupt storm by counting the number of unhandled interrupts
> > >>> within a 10 ms time interval. In case that more than 1000 were unhandled
> > >>> deactivate interrupts, deregister the handler and fall back to polling.
> > >>
> > >> I know it can be sometimes hard to evaluate but can you try to explain
> > >> how you came up to the 10 ms sampling period and 1000 interrupt
> > >> threshold? I just don't like abritrary numbers.
> > > 
> > > At least the 100 ms is not plucked out of thin air but its the same time period
> > > that the generic code in note_interrupt() uses - I assume for a good reason.
> > > Not only this number but the whole irq storm detection logic is taken from 
> > > there: 
> > > 
> > >>
> > >>> This equals the implementation that handles interrupt storms in
> > >>> note_interrupt() by means of timestamps and counters in struct irq_desc.
> > >> The number of 1000 unhandled interrupts is still far below the 99900
> > used in
> > > note_interrupt() but IMHO enough to indicate that there is something seriously
> > > wrong with interrupt processing and it is probably saver to fall back to polling.
> > 
> > Except that if the line got the spurious designation in core, the
> > interrupt line will be disabled while the TPM driver will think that it
> > is still using IRQ mode and will not switch to polling.
> > 
> > A storm of 1000 is better than a storm of 99900 for sure but quirking
> > these would be the desired final solution. imho
>
> If that is the case, then output could probably be sent to the console
> detailing the dmi info needed to update the table.

+1

Good idea.

BR, Jarkko
  
Jarkko Sakkinen June 6, 2023, 4:42 p.m. UTC | #37
On Mon May 29, 2023 at 4:15 PM EEST, Lino Sanfilippo wrote:
> > Except that if the line got the spurious designation in core, the
> > interrupt line will be disabled while the TPM driver will think that it
> > is still using IRQ mode and will not switch to polling.
>
> In the case that an interrupt storm cant be detected (since there might not even
> be one) I am fine with adding a quirk.

Speaking of generic vs quirk (if storm can be detected): detection
should be eager as ever possible. Too eager does not cause systems
failing.

This way I think we can converge to stability fast as possible.

Then, later on, if a system where interrupts should work but the
detection disables interrupts we can either make the fixed threshold
less eager, or add a tuning parameter to sysfs.

BR, Jarkko
  
Jarkko Sakkinen June 6, 2023, 4:45 p.m. UTC | #38
On Mon May 29, 2023 at 9:46 AM EEST, Péter Ujfalusi wrote:
> I'm surprised that there is a need for a storm detection in the first
> place... Do we have something else on the same IRQ line on the affected
> devices which might have a bug or no driver at all?
> It is hard to believe that a TPM (Trusted Platform Module) is integrated
> so poorly ;)

I mentioned this some emails ago (do not care to look up when does not
matter) and I guess the reason for this might be that a generic solution
compassing all arch's etc. might be tricky to design...

BR, Jarkko
  

Patch

diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index 558144fa707a..458ebf8c2f16 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -752,6 +752,55 @@  static bool tpm_tis_req_canceled(struct tpm_chip *chip, u8 status)
 	return status == TPM_STS_COMMAND_READY;
 }
 
+static void tpm_tis_handle_irq_storm(struct tpm_chip *chip)
+{
+	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
+	int intmask = 0;
+
+	dev_err(&chip->dev, HW_ERR
+		"TPM interrupt storm detected, polling instead\n");
+
+	tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
+
+	intmask &= ~TPM_GLOBAL_INT_ENABLE;
+
+	tpm_tis_request_locality(chip, 0);
+	tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
+	tpm_tis_relinquish_locality(chip, 0);
+
+	chip->flags &= ~TPM_CHIP_FLAG_IRQ;
+
+	/*
+	 * We must not call devm_free_irq() from within the interrupt handler,
+	 * since this function waits for running interrupt handlers to finish
+	 * and thus it would deadlock. Instead trigger a worker that does the
+	 * unregistration.
+	 */
+	schedule_work(&priv->free_irq_work);
+}
+
+static void tpm_tis_process_unhandled_interrupt(struct tpm_chip *chip)
+{
+	const unsigned int MAX_UNHANDLED_IRQS = 1000;
+	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
+	/*
+	 * The worker to free the TPM interrupt (free_irq_work) may already
+	 * be scheduled, so make sure it is not scheduled again.
+	 */
+	if (!(chip->flags & TPM_CHIP_FLAG_IRQ))
+		return;
+
+	if (time_after(jiffies, priv->last_unhandled_irq + HZ/10))
+		priv->unhandled_irqs = 1;
+	else
+		priv->unhandled_irqs++;
+
+	priv->last_unhandled_irq = jiffies;
+
+	if (priv->unhandled_irqs > MAX_UNHANDLED_IRQS)
+		tpm_tis_handle_irq_storm(chip);
+}
+
 static irqreturn_t tis_int_handler(int dummy, void *dev_id)
 {
 	struct tpm_chip *chip = dev_id;
@@ -761,10 +810,10 @@  static irqreturn_t tis_int_handler(int dummy, void *dev_id)
 
 	rc = tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &interrupt);
 	if (rc < 0)
-		return IRQ_NONE;
+		goto unhandled;
 
 	if (interrupt == 0)
-		return IRQ_NONE;
+		goto unhandled;
 
 	set_bit(TPM_TIS_IRQ_TESTED, &priv->flags);
 	if (interrupt & TPM_INTF_DATA_AVAIL_INT)
@@ -780,10 +829,14 @@  static irqreturn_t tis_int_handler(int dummy, void *dev_id)
 	rc = tpm_tis_write32(priv, TPM_INT_STATUS(priv->locality), interrupt);
 	tpm_tis_relinquish_locality(chip, 0);
 	if (rc < 0)
-		return IRQ_NONE;
+		goto unhandled;
 
 	tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &interrupt);
 	return IRQ_HANDLED;
+
+unhandled:
+	tpm_tis_process_unhandled_interrupt(chip);
+	return IRQ_HANDLED;
 }
 
 static void tpm_tis_gen_interrupt(struct tpm_chip *chip)
@@ -804,6 +857,15 @@  static void tpm_tis_gen_interrupt(struct tpm_chip *chip)
 		chip->flags &= ~TPM_CHIP_FLAG_IRQ;
 }
 
+static void tpm_tis_free_irq_func(struct work_struct *work)
+{
+	struct tpm_tis_data *priv = container_of(work, typeof(*priv), free_irq_work);
+	struct tpm_chip *chip = priv->chip;
+
+	devm_free_irq(chip->dev.parent, priv->irq, chip);
+	priv->irq = 0;
+}
+
 /* Register the IRQ and issue a command that will cause an interrupt. If an
  * irq is seen then leave the chip setup for IRQ operation, otherwise reverse
  * everything and leave in polling mode. Returns 0 on success.
@@ -816,6 +878,7 @@  static int tpm_tis_probe_irq_single(struct tpm_chip *chip, u32 intmask,
 	int rc;
 	u32 int_status;
 
+	INIT_WORK(&priv->free_irq_work, tpm_tis_free_irq_func);
 
 	rc = devm_request_threaded_irq(chip->dev.parent, irq, NULL,
 				       tis_int_handler, IRQF_ONESHOT | flags,
@@ -918,6 +981,7 @@  void tpm_tis_remove(struct tpm_chip *chip)
 		interrupt = 0;
 
 	tpm_tis_write32(priv, reg, ~TPM_GLOBAL_INT_ENABLE & interrupt);
+	flush_work(&priv->free_irq_work);
 
 	tpm_tis_clkrun_enable(chip, false);
 
@@ -1021,6 +1085,7 @@  int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
 	chip->timeout_b = msecs_to_jiffies(TIS_TIMEOUT_B_MAX);
 	chip->timeout_c = msecs_to_jiffies(TIS_TIMEOUT_C_MAX);
 	chip->timeout_d = msecs_to_jiffies(TIS_TIMEOUT_D_MAX);
+	priv->chip = chip;
 	priv->timeout_min = TPM_TIMEOUT_USECS_MIN;
 	priv->timeout_max = TPM_TIMEOUT_USECS_MAX;
 	priv->phy_ops = phy_ops;
diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h
index e978f457fd4d..6fc86baa4398 100644
--- a/drivers/char/tpm/tpm_tis_core.h
+++ b/drivers/char/tpm/tpm_tis_core.h
@@ -91,12 +91,18 @@  enum tpm_tis_flags {
 };
 
 struct tpm_tis_data {
+	struct tpm_chip *chip;
 	u16 manufacturer_id;
 	struct mutex locality_count_mutex;
 	unsigned int locality_count;
 	int locality;
+	/* Interrupts */
 	int irq;
+	struct work_struct free_irq_work;
+	unsigned long last_unhandled_irq;
+	unsigned int unhandled_irqs;
 	unsigned int int_mask;
+
 	unsigned long flags;
 	void __iomem *ilb_base_addr;
 	u16 clkrun_enabled;