Update the trampoline code so its arguments are passed via RDI and RSI,
which matches the ordinary SysV calling convention for x86_64. This will
allow this code to be called directly from C.
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
arch/x86/boot/compressed/head_64.S | 30 +++++++++-----------
arch/x86/boot/compressed/pgtable.h | 2 +-
2 files changed, 14 insertions(+), 18 deletions(-)
@@ -443,9 +443,9 @@ SYM_CODE_START(startup_64)
movq %r15, %rdi /* pass struct boot_params pointer */
call paging_prepare
- /* Save the trampoline address in RCX */
- movq %rax, %rcx
-
+ /* Pass the trampoline address and boolean flag as args #1 and #2 */
+ movq %rax, %rdi
+ movq %rdx, %rsi
leaq TRAMPOLINE_32BIT_CODE_OFFSET(%rax), %rax
call *%rax
@@ -534,11 +534,11 @@ SYM_FUNC_END(.Lrelocated)
/*
* This is the 32-bit trampoline that will be copied over to low memory.
*
- * ECX contains the base address of the trampoline memory.
- * Non zero RDX means trampoline needs to enable 5-level paging.
+ * EDI contains the base address of the trampoline memory.
+ * Non-zero ESI means trampoline needs to enable 5-level paging.
*/
SYM_CODE_START(trampoline_32bit_src)
- popq %rdi
+ popq %r8
/* Switch to compatibility mode (CS.L = 0 CS.D = 1) via far return */
pushq $__KERNEL32_CS
leaq 0f(%rip), %rax
@@ -552,7 +552,7 @@ SYM_CODE_START(trampoline_32bit_src)
movl %eax, %ss
/* Set up new stack */
- leal TRAMPOLINE_32BIT_STACK_END(%ecx), %esp
+ leal TRAMPOLINE_32BIT_STACK_END(%edi), %esp
/* Disable paging */
movl %cr0, %eax
@@ -560,7 +560,7 @@ SYM_CODE_START(trampoline_32bit_src)
movl %eax, %cr0
/* Check what paging mode we want to be in after the trampoline */
- testl %edx, %edx
+ testl %esi, %esi
jz 1f
/* We want 5-level paging: don't touch CR3 if it already points to 5-level page tables */
@@ -575,21 +575,17 @@ SYM_CODE_START(trampoline_32bit_src)
jz 3f
2:
/* Point CR3 to the trampoline's new top level page table */
- leal TRAMPOLINE_32BIT_PGTABLE_OFFSET(%ecx), %eax
+ leal TRAMPOLINE_32BIT_PGTABLE_OFFSET(%edi), %eax
movl %eax, %cr3
3:
/* Set EFER.LME=1 as a precaution in case hypervsior pulls the rug */
- pushl %ecx
- pushl %edx
movl $MSR_EFER, %ecx
rdmsr
btsl $_EFER_LME, %eax
/* Avoid writing EFER if no change was made (for TDX guest) */
jc 1f
wrmsr
-1: popl %edx
- popl %ecx
-
+1:
#ifdef CONFIG_X86_MCE
/*
* Preserve CR4.MCE if the kernel will enable #MC support.
@@ -606,14 +602,14 @@ SYM_CODE_START(trampoline_32bit_src)
/* Enable PAE and LA57 (if required) paging modes */
orl $X86_CR4_PAE, %eax
- testl %edx, %edx
+ testl %esi, %esi
jz 1f
orl $X86_CR4_LA57, %eax
1:
movl %eax, %cr4
/* Calculate address of paging_enabled() once we are executing in the trampoline */
- leal .Lpaging_enabled - trampoline_32bit_src + TRAMPOLINE_32BIT_CODE_OFFSET(%ecx), %eax
+ leal .Lpaging_enabled - trampoline_32bit_src + TRAMPOLINE_32BIT_CODE_OFFSET(%edi), %eax
/* Prepare the stack for far return to Long Mode */
pushl $__KERNEL_CS
@@ -630,7 +626,7 @@ SYM_CODE_END(trampoline_32bit_src)
.code64
SYM_FUNC_START_LOCAL_NOALIGN(.Lpaging_enabled)
/* Return from the trampoline */
- jmp *%rdi
+ jmp *%r8
SYM_FUNC_END(.Lpaging_enabled)
/*
@@ -14,7 +14,7 @@
extern unsigned long *trampoline_32bit;
-extern void trampoline_32bit_src(void *return_ptr);
+extern void trampoline_32bit_src(void *trampoline, bool enable_5lvl);
#endif /* __ASSEMBLER__ */
#endif /* BOOT_COMPRESSED_PAGETABLE_H */