From patchwork Sat May 20 10:57:17 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Sui Jingfeng <15330273260@189.cn> X-Patchwork-Id: 96787 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a59:b0ea:0:b0:3b6:4342:cba0 with SMTP id b10csp339078vqo; Sat, 20 May 2023 05:43:39 -0700 (PDT) X-Google-Smtp-Source: ACHHUZ6+u/RViAE3s60RzqT5m3HvksP/O251ru5R22kL+CTf3mtwHPiDHM9f0OH0GNUX9clfiE/H X-Received: by 2002:a17:902:e848:b0:1ab:275:5abf with SMTP id t8-20020a170902e84800b001ab02755abfmr6752848plg.55.1684586618726; Sat, 20 May 2023 05:43:38 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1684586618; cv=none; d=google.com; s=arc-20160816; b=hmHoiyp3PevmZa5I/9blXNn11XyoHVXD2uG6KZM3EJ8iRQKTN6gBNOakzWh8jdvouZ QlSG/M4hiuyg/0jOa8kaVUTqdWkkewJFmWF8vv8GR6nw0RhYst16l0ELl3xsx6ErFFSL fhwGMlEp/Jza9etV19DfRPaBnPMfrLJmDbLtn9+JKqN7xjAHDL+Dw6Pg3zNaSr/gGYix vH20YVFBd2PHOKTzUl1MGuc8BfH2pGN56QJWm1EVR4OR3yF0ODMPwjly/h8jWvclkqd3 QPqsXMYThbbBs82+6wb7SYJ9d2v4pEpD4XdiJEJNW+vVufVe7StrcsO3Wii4S11gqaG9 dT3A== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from:sender :hmm_source_type:hmm_attache_num:hmm_source_ip; bh=VzqJ6xwjMgxAHcvm7QWEW9aKtpZtxtXEs6hW8+w/OLc=; b=Rzzs0F1K9C+LEp40qn9b04c2r32lGa9lufeJVcrq32IFOWQLN8nRp6pRgis+aaS4Gl +1TtQiqGuUhnZqYlgXgjOC1Mi2LQ3mtg2J6C7JRztP9F8X2Ge8uvTW8G9wAozK/GZ92L wlobE+4fCQ6jQPZKvkwIFM8WCqxmLWQV4GKQmsc28Mgwq1BsuD0QveXWYowU4EzF82qb UVMIwQn3dXhPh8v+HU3qc2bdKXoo6jfrU/7WSkLkwnTa2mDtQ0jst7x3RkH8HWy92eWn 0Z8IyWRzD6rUFxdQTLMEU3Pz+EHQ9G9ixGKqJas/Yacv8CCl8h6XRkwp7qY6gKMJSVsY 0Ovw== ARC-Authentication-Results: i=1; mx.google.com; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id q15-20020a17090311cf00b001aafe3f409asi1443971plh.205.2023.05.20.05.43.23; Sat, 20 May 2023 05:43:38 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231521AbjETK6J (ORCPT + 99 others); Sat, 20 May 2023 06:58:09 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:38798 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230219AbjETK6B (ORCPT ); Sat, 20 May 2023 06:58:01 -0400 Received: from 189.cn (ptr.189.cn [183.61.185.104]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id D73E21B7; Sat, 20 May 2023 03:57:54 -0700 (PDT) HMM_SOURCE_IP: 10.64.8.41:56618.881688069 HMM_ATTACHE_NUM: 0000 HMM_SOURCE_TYPE: SMTP Received: from clientip-114.242.206.180 (unknown [10.64.8.41]) by 189.cn (HERMES) with SMTP id 1993B1002AA; Sat, 20 May 2023 18:57:50 +0800 (CST) Received: from ([114.242.206.180]) by gateway-151646-dep-75648544bd-xwndj with ESMTP id b8c2b84acc094695b1d4a28b3875bb8c for maarten.lankhorst@linux.intel.com; Sat, 20 May 2023 18:57:54 CST X-Transaction-ID: b8c2b84acc094695b1d4a28b3875bb8c X-Real-From: 15330273260@189.cn X-Receive-IP: 114.242.206.180 X-MEDUSA-Status: 0 Sender: 15330273260@189.cn From: Sui Jingfeng <15330273260@189.cn> To: Maarten Lankhorst , Maxime Ripard , Thomas Zimmermann , David Airlie , Daniel Vetter , Sui Jingfeng , Li Yi , suijingfeng <15330273260@189.cn>, Sumit Semwal , Christian Koenig , Emil Velikov Cc: Nathan Chancellor , linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-media@vger.kernel.org, linaro-mm-sig@lists.linaro.org, loongson-kernel@lists.loongnix.cn, Liu Peibao , Geert Uytterhoeven , Javier Martinez Canillas Subject: [PATCH v14 1/2] drm: add kms driver for loongson display controller Date: Sat, 20 May 2023 18:57:17 +0800 Message-Id: <20230520105718.325819-2-15330273260@189.cn> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20230520105718.325819-1-15330273260@189.cn> References: <20230520105718.325819-1-15330273260@189.cn> MIME-Version: 1.0 X-Spam-Status: No, score=-1.7 required=5.0 tests=BAYES_00, FREEMAIL_ENVFROM_END_DIGIT,FREEMAIL_FROM,FROM_LOCAL_DIGITS, FROM_LOCAL_HEX,SPF_HELO_PASS,SPF_PASS,T_SCC_BODY_TEXT_LINE autolearn=no autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-getmail-retrieved-from-mailbox: =?utf-8?q?INBOX?= X-GMAIL-THRID: =?utf-8?q?1766415651720290528?= X-GMAIL-MSGID: =?utf-8?q?1766417098043052685?= From: Sui Jingfeng Loongson display controller IP has been integrated in both Loongson north bridge chipset(ls7a1000/ls7a2000) and Loongson SoCs(ls2k1000/ls2k2000), it has been even included in Loongson self-made BMC products. This display controller is a PCI device. It has two display pipes and each display pipe support a primary plane and a cursor plane. For the DC in the ls7a1000 and ls2k1000, each display pipe has a DVO output interface which provide RGB888 signals, vertical & horizontal synchronisations and pixel clock. Each CRTC is able to support 1920x1080@60Hz, the maximum resolution of each display pipe is 2048x2048 according to the hardware spec. For the DC in LS7A2000, each display pipe is equipped with a built-in HDMI encoder which is compliant with the HDMI 1.4 specification, thus it support 3840x2160@30Hz. The first display pipe is also equipped with a transparent vga encoder which is parallel with the HDMI encoder. The DC in LS7A2000 is more complete compare with the one in old chips, besides above feature, it has two hardware cursors, two hardware vblank counter and two scanout position recorders unit. It also support tiled framebuffer format which can be scanout the tiled framebuffer rendered by the LoongGPU directly. v1 -> v2: 1) Use hpd status reg when polling for ls7a2000 2) Fix all warnings emerged when compile with W=1 v2 -> v3: 1) Add COMPILE_TEST in Kconfig and make the driver off by default 2) Alphabetical sorting headers (Thomas) 3) Untangle register access functions as much as possible (Thomas) 4) Switch to TTM based memory manager and prefer cached mapping for Loongson SoC (Thomas) 5) Add chip id detection method, now all models are distinguishable. 6) Revise builtin HDMI phy driver, nearly all main stream mode below 4K@30Hz is tested, this driver supported these mode very well including clone display mode and extend display mode. v3 -> v4: 1) Quickly fix a small mistake. v4 -> v5: 1) Drop potential support for Loongson 2K series SoC temporary, this part should be resend with the DT binding patch in the future. 2) Add per display pipe debugfs support to the builtin HDMI encoder. 3) Rewrite atomic_update() for hardware cursors plane(Thomas) 4) Rewrite encoder and connector initialization part, untangle it according to the chip(Thomas). v5 -> v6: 1) Remove stray code which didn't get used, say lsdc_of_get_reserved_ram 2) Fix all typos I could found, make sentences and code more readable 3) Untangle lsdc_hdmi*_connector_detect() function according to the pipe 4) After a serious consideration, we rename this driver as loongson. Because we also have drivers toward the LoongGPU IP in LS7A2000 and LS2K2000. Besides, there are also drivers about the external encoder, HDMI audio driver and vbios support etc. This patch only provide DC driver part, my teammate Li Yi believe that loongson will be more suitable for loongson graphics than lsdc in the long run. loongson.ko = LSDC + LoongGPU + encoders driver + vbios/DT ... v6 -> v7: 1) Add prime support, self-sharing is works. sharing buffer with etnaviv is also tested, and its works with limitation. 2) Implement buffer objects tracking with list_head. 3) S3(sleep to RAM) is tested on ls3a5000+ls7a2000 evb and it works. 4) Rewrite lsdc_bo_move, since ttm core stop allocating resources during BO creation. Patch V1 ~ V6 of this series no longer works on latest kernel. Thus, we send V7 to revival them. v7 -> v8: 1) Zero a compile warnnings on 32-bit platform, compile with W=1 2) Revise lsdc_bo_gpu_offset() and minor cleanup 3) Pageflip tested on the virtual terminal with following commands modetest -M loongson -s 32:1920x1080 -v modetest -M loongson -s 34:1920x1080 -v -F tiles It works like a charm, when running pageflip test with dual screnn configuration, another two additional bo created by the modetest emerged, VRAM usage up to 40+MB, well we have at least 64MB, still enough. # cat bos bo[0000]: size: 8112kB VRAM bo[0001]: size: 16kB VRAM bo[0002]: size: 16kB VRAM bo[0003]: size: 16208kB VRAM bo[0004]: size: 8112kB VRAM bo[0005]: size: 8112kB VRAM v8 -> v9: 1) Select I2C and I2C_ALGOBIT in Kconfig and should depend on MMU. 2) Using pci_get_domain_bus_and_slot to get the GPU device. 3) Other minor improvements. Those patches are tested on ls3a5000 + ls7a1000 CRB, ls3a5000 + ls7a2000 evb, and lemote a1901 board(ls3a4000 + ls7a1000). On loongson mips CPU, the write combine support should be enabled, to get a decent performance for writing framebuffer data to the VRAM. v9 -> v10: 1) Revise lsdc_drm_freeze() to implement S3 completely and correctly. I suddenly realized that pinned buffer can not move and VRAM lost power when sleep to RAM. Thus, the data in the buffer who is pinned in VRAM will get lost when resume. Yet it's not big problem because we are software rendering solution which relay on the CPU update the front framebuffer. We can see the garbage data when resume from S3, but the screen will show correct image as I move the cursor. This is due to the cpu repaint. v10 of this patch make S3 perfect by unpin all of BOs in VRAM, evict them all to system RAM. v10 -> v11: 1) On double screen case, the single giant framebuffer is referenced by two GEM object, hence, it will be pinned by prepare_fb() at lease two times. This cause its pin count > 1. V10 of this patch only unpin VRAM BOs once when suspend, which is not correct on double screen case. V11 of this patch unpin BOs until its pin count reach to zero when suspend. Then, we make the S3 support complete finally. With v11, I can't see any garbage data after resume. Tested on both ls7a1000 and ls7a2000 platform, with single screen and double screen configuration. 2) Fix vblank wait timeout when disable CRTC. 3) Test against IGT, at least fbdev test and kms_flip test passed. 4) Rewrite pixel PLL update function, magic numbers eliminated (Emil) 5) Drop a few common hardware features description in lsdc_desc (Emil) 6) Drop lsdc_mode_config_mode_valid(), instead add restrictions in dumb create function. (Emil) 7) Untangle the ls7a1000 case and ls7a2000 case completely (Thomas) v11 -> v12: none v12 -> v13: 1) Add benchmark to figure out the bandwidth of the hardware platform. Usage: # cd /sys/kernel/debug/dri/0/ # cat benchmark 2) VRAM is filled with garbage data if uninitialized, add a buffer clearing procedure, clear it on the BO creation time. 3) Update copyrights and adjust coding style (Huacai) v13 -> v14: 1) Trying to add async update support for cursor plane. Signed-off-by: Li Yi Signed-off-by: Sui Jingfeng Tested-by: Liu Peibao Cc: Maarten Lankhorst Cc: Maxime Ripard Cc: Thomas Zimmermann Cc: David Airlie Cc: Daniel Vetter Cc: Sumit Semwal Cc: "Christian König" Cc: Nathan Chancellor Cc: Emil Velikov Cc: Geert Uytterhoeven Cc: Javier Martinez Canillas --- drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/loongson/Kconfig | 17 + drivers/gpu/drm/loongson/Makefile | 20 + drivers/gpu/drm/loongson/lsdc_benchmark.c | 133 ++ drivers/gpu/drm/loongson/lsdc_benchmark.h | 13 + drivers/gpu/drm/loongson/lsdc_crtc.c | 1066 +++++++++++++++++ drivers/gpu/drm/loongson/lsdc_debugfs.c | 91 ++ drivers/gpu/drm/loongson/lsdc_device.c | 104 ++ drivers/gpu/drm/loongson/lsdc_drv.c | 495 ++++++++ drivers/gpu/drm/loongson/lsdc_drv.h | 451 +++++++ drivers/gpu/drm/loongson/lsdc_gem.c | 324 +++++ drivers/gpu/drm/loongson/lsdc_gem.h | 37 + drivers/gpu/drm/loongson/lsdc_gfxpll.c | 199 +++ drivers/gpu/drm/loongson/lsdc_gfxpll.h | 52 + drivers/gpu/drm/loongson/lsdc_i2c.c | 179 +++ drivers/gpu/drm/loongson/lsdc_i2c.h | 29 + drivers/gpu/drm/loongson/lsdc_irq.c | 71 ++ drivers/gpu/drm/loongson/lsdc_irq.h | 16 + drivers/gpu/drm/loongson/lsdc_output.h | 21 + drivers/gpu/drm/loongson/lsdc_output_7a1000.c | 161 +++ drivers/gpu/drm/loongson/lsdc_output_7a2000.c | 531 ++++++++ drivers/gpu/drm/loongson/lsdc_pixpll.c | 481 ++++++++ drivers/gpu/drm/loongson/lsdc_pixpll.h | 86 ++ drivers/gpu/drm/loongson/lsdc_plane.c | 781 ++++++++++++ drivers/gpu/drm/loongson/lsdc_probe.c | 56 + drivers/gpu/drm/loongson/lsdc_probe.h | 12 + drivers/gpu/drm/loongson/lsdc_regs.h | 402 +++++++ drivers/gpu/drm/loongson/lsdc_ttm.c | 610 ++++++++++ drivers/gpu/drm/loongson/lsdc_ttm.h | 99 ++ 30 files changed, 6540 insertions(+) create mode 100644 drivers/gpu/drm/loongson/Kconfig create mode 100644 drivers/gpu/drm/loongson/Makefile create mode 100644 drivers/gpu/drm/loongson/lsdc_benchmark.c create mode 100644 drivers/gpu/drm/loongson/lsdc_benchmark.h create mode 100644 drivers/gpu/drm/loongson/lsdc_crtc.c create mode 100644 drivers/gpu/drm/loongson/lsdc_debugfs.c create mode 100644 drivers/gpu/drm/loongson/lsdc_device.c create mode 100644 drivers/gpu/drm/loongson/lsdc_drv.c create mode 100644 drivers/gpu/drm/loongson/lsdc_drv.h create mode 100644 drivers/gpu/drm/loongson/lsdc_gem.c create mode 100644 drivers/gpu/drm/loongson/lsdc_gem.h create mode 100644 drivers/gpu/drm/loongson/lsdc_gfxpll.c create mode 100644 drivers/gpu/drm/loongson/lsdc_gfxpll.h create mode 100644 drivers/gpu/drm/loongson/lsdc_i2c.c create mode 100644 drivers/gpu/drm/loongson/lsdc_i2c.h create mode 100644 drivers/gpu/drm/loongson/lsdc_irq.c create mode 100644 drivers/gpu/drm/loongson/lsdc_irq.h create mode 100644 drivers/gpu/drm/loongson/lsdc_output.h create mode 100644 drivers/gpu/drm/loongson/lsdc_output_7a1000.c create mode 100644 drivers/gpu/drm/loongson/lsdc_output_7a2000.c create mode 100644 drivers/gpu/drm/loongson/lsdc_pixpll.c create mode 100644 drivers/gpu/drm/loongson/lsdc_pixpll.h create mode 100644 drivers/gpu/drm/loongson/lsdc_plane.c create mode 100644 drivers/gpu/drm/loongson/lsdc_probe.c create mode 100644 drivers/gpu/drm/loongson/lsdc_probe.h create mode 100644 drivers/gpu/drm/loongson/lsdc_regs.h create mode 100644 drivers/gpu/drm/loongson/lsdc_ttm.c create mode 100644 drivers/gpu/drm/loongson/lsdc_ttm.h diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index ba3fb04bb691..d1fa87d2acb7 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -331,6 +331,8 @@ source "drivers/gpu/drm/v3d/Kconfig" source "drivers/gpu/drm/vc4/Kconfig" +source "drivers/gpu/drm/loongson/Kconfig" + source "drivers/gpu/drm/etnaviv/Kconfig" source "drivers/gpu/drm/hisilicon/Kconfig" diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index a33257d2bc7f..131531453b8e 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -194,3 +194,4 @@ obj-y += gud/ obj-$(CONFIG_DRM_HYPERV) += hyperv/ obj-y += solomon/ obj-$(CONFIG_DRM_SPRD) += sprd/ +obj-$(CONFIG_DRM_LOONGSON) += loongson/ diff --git a/drivers/gpu/drm/loongson/Kconfig b/drivers/gpu/drm/loongson/Kconfig new file mode 100644 index 000000000000..df6946d505fa --- /dev/null +++ b/drivers/gpu/drm/loongson/Kconfig @@ -0,0 +1,17 @@ +# SPDX-License-Identifier: GPL-2.0 + +config DRM_LOONGSON + tristate "DRM support for Loongson Graphics" + depends on DRM && PCI && MMU + select DRM_KMS_HELPER + select DRM_TTM + select I2C + select I2C_ALGOBIT + help + This is a DRM driver for Loongson Graphics, it may including + LS7A2000, LS7A1000, LS2K2000 and LS2K1000 etc. Loongson LS7A + series are bridge chipset, while Loongson LS2K series are SoC. + + If "M" is selected, the module will be called loongson. + + If in doubt, say "N". diff --git a/drivers/gpu/drm/loongson/Makefile b/drivers/gpu/drm/loongson/Makefile new file mode 100644 index 000000000000..9158816ece8e --- /dev/null +++ b/drivers/gpu/drm/loongson/Makefile @@ -0,0 +1,20 @@ +# SPDX-License-Identifier: GPL-2.0 + +loongson-y := \ + lsdc_benchmark.o \ + lsdc_crtc.o \ + lsdc_debugfs.o \ + lsdc_device.o \ + lsdc_drv.o \ + lsdc_gem.o \ + lsdc_gfxpll.o \ + lsdc_i2c.o \ + lsdc_irq.o \ + lsdc_output_7a1000.o \ + lsdc_output_7a2000.o \ + lsdc_plane.o \ + lsdc_pixpll.o \ + lsdc_probe.o \ + lsdc_ttm.o + +obj-$(CONFIG_DRM_LOONGSON) += loongson.o diff --git a/drivers/gpu/drm/loongson/lsdc_benchmark.c b/drivers/gpu/drm/loongson/lsdc_benchmark.c new file mode 100644 index 000000000000..82961531d84c --- /dev/null +++ b/drivers/gpu/drm/loongson/lsdc_benchmark.c @@ -0,0 +1,133 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2023 Loongson Technology Corporation Limited + */ + +#include + +#include "lsdc_benchmark.h" +#include "lsdc_drv.h" +#include "lsdc_gem.h" +#include "lsdc_ttm.h" + +typedef void (*lsdc_copy_proc_t)(struct lsdc_bo *src_bo, + struct lsdc_bo *dst_bo, + unsigned int size, + int n); + +static void lsdc_copy_gtt_to_vram_cpu(struct lsdc_bo *src_bo, + struct lsdc_bo *dst_bo, + unsigned int size, + int n) +{ + lsdc_bo_kmap(src_bo); + lsdc_bo_kmap(dst_bo); + + while (n--) + memcpy_toio(dst_bo->kptr, src_bo->kptr, size); + + lsdc_bo_kunmap(src_bo); + lsdc_bo_kunmap(dst_bo); +} + +static void lsdc_copy_vram_to_gtt_cpu(struct lsdc_bo *src_bo, + struct lsdc_bo *dst_bo, + unsigned int size, + int n) +{ + lsdc_bo_kmap(src_bo); + lsdc_bo_kmap(dst_bo); + + while (n--) + memcpy_fromio(dst_bo->kptr, src_bo->kptr, size); + + lsdc_bo_kunmap(src_bo); + lsdc_bo_kunmap(dst_bo); +} + +static void lsdc_copy_gtt_to_gtt_cpu(struct lsdc_bo *src_bo, + struct lsdc_bo *dst_bo, + unsigned int size, + int n) +{ + lsdc_bo_kmap(src_bo); + lsdc_bo_kmap(dst_bo); + + while (n--) + memcpy(dst_bo->kptr, src_bo->kptr, size); + + lsdc_bo_kunmap(src_bo); + lsdc_bo_kunmap(dst_bo); +} + +static void lsdc_benchmark_copy(struct lsdc_device *ldev, + unsigned int size, + unsigned int n, + u32 src_domain, + u32 dst_domain, + lsdc_copy_proc_t copy_proc, + struct drm_printer *p) +{ + struct drm_device *ddev = &ldev->base; + struct lsdc_bo *src_bo; + struct lsdc_bo *dst_bo; + unsigned long start_jiffies; + unsigned long end_jiffies; + unsigned int throughput; + unsigned int time; + + src_bo = lsdc_bo_create_kernel_pinned(ddev, src_domain, size); + dst_bo = lsdc_bo_create_kernel_pinned(ddev, dst_domain, size); + + start_jiffies = jiffies; + + copy_proc(src_bo, dst_bo, size, n); + + end_jiffies = jiffies; + + lsdc_bo_free_kernel_pinned(src_bo); + lsdc_bo_free_kernel_pinned(dst_bo); + + time = jiffies_to_msecs(end_jiffies - start_jiffies); + + throughput = (n * (size >> 10)) / time; + + drm_printf(p, + "Copy bo of %ukB %u times from %s to %s in %ums: %uMB/s\n", + size >> 10, n, + lsdc_domain_to_str(src_domain), + lsdc_domain_to_str(dst_domain), + time, throughput); +} + +int lsdc_show_benchmark_copy(struct lsdc_device *ldev, struct drm_printer *p) +{ + unsigned int buffer_size = 1920 * 1080 * 4; + unsigned int iteration = 60; + + lsdc_benchmark_copy(ldev, + buffer_size, + iteration, + LSDC_GEM_DOMAIN_GTT, + LSDC_GEM_DOMAIN_GTT, + lsdc_copy_gtt_to_gtt_cpu, + p); + + lsdc_benchmark_copy(ldev, + buffer_size, + iteration, + LSDC_GEM_DOMAIN_GTT, + LSDC_GEM_DOMAIN_VRAM, + lsdc_copy_gtt_to_vram_cpu, + p); + + lsdc_benchmark_copy(ldev, + buffer_size, + iteration, + LSDC_GEM_DOMAIN_VRAM, + LSDC_GEM_DOMAIN_GTT, + lsdc_copy_vram_to_gtt_cpu, + p); + + return 0; +} diff --git a/drivers/gpu/drm/loongson/lsdc_benchmark.h b/drivers/gpu/drm/loongson/lsdc_benchmark.h new file mode 100644 index 000000000000..2bf9406eae9c --- /dev/null +++ b/drivers/gpu/drm/loongson/lsdc_benchmark.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2023 Loongson Technology Corporation Limited + */ + +#ifndef __LSDC_BENCHMARK_H__ +#define __LSDC_BENCHMARK_H__ + +#include "lsdc_drv.h" + +int lsdc_show_benchmark_copy(struct lsdc_device *ldev, struct drm_printer *p); + +#endif diff --git a/drivers/gpu/drm/loongson/lsdc_crtc.c b/drivers/gpu/drm/loongson/lsdc_crtc.c new file mode 100644 index 000000000000..de2c1d514baa --- /dev/null +++ b/drivers/gpu/drm/loongson/lsdc_crtc.c @@ -0,0 +1,1066 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2023 Loongson Technology Corporation Limited + */ + +#include + +#include +#include +#include +#include + +#include "lsdc_drv.h" + +/* + * The soft reset cause the vblank counter reset to zero, but the address + * and other settings in the crtc register remains. + */ + +static void lsdc_crtc0_soft_reset(struct lsdc_crtc *lcrtc) +{ + struct lsdc_device *ldev = lcrtc->ldev; + u32 val; + + val = lsdc_rreg32(ldev, LSDC_CRTC0_CFG_REG); + + val &= CFG_VALID_BITS_MASK; + + /* soft reset bit, active low */ + val &= ~CFG_RESET_N; + + val &= ~CFG_PIX_FMT_MASK; + + lsdc_wreg32(ldev, LSDC_CRTC0_CFG_REG, val); + + udelay(5); + + val |= CFG_RESET_N | LSDC_PF_XRGB8888 | CFG_OUTPUT_ENABLE; + + lsdc_wreg32(ldev, LSDC_CRTC0_CFG_REG, val); + + mdelay(20); +} + +static void lsdc_crtc1_soft_reset(struct lsdc_crtc *lcrtc) +{ + struct lsdc_device *ldev = lcrtc->ldev; + u32 val; + + val = lsdc_rreg32(ldev, LSDC_CRTC1_CFG_REG); + + val &= CFG_VALID_BITS_MASK; + + /* soft reset bit, active low */ + val &= ~CFG_RESET_N; + + val &= ~CFG_PIX_FMT_MASK; + + lsdc_wreg32(ldev, LSDC_CRTC1_CFG_REG, val); + + udelay(5); + + val |= CFG_RESET_N | LSDC_PF_XRGB8888 | CFG_OUTPUT_ENABLE; + + lsdc_wreg32(ldev, LSDC_CRTC1_CFG_REG, val); + + msleep(20); +} + +static void lsdc_crtc0_enable(struct lsdc_crtc *lcrtc) +{ + struct lsdc_device *ldev = lcrtc->ldev; + u32 val; + + val = lsdc_rreg32(ldev, LSDC_CRTC0_CFG_REG); + + /* + * This may happens on extremely rare case, luckily, a soft reset + * can helps to bring it back to normal. We add a warn here, hope + * to catch something if it happens. + */ + + if (val & CRTC_ANCHORED) { + drm_warn(&ldev->base, "%s anchored\n", lcrtc->base.name); + return lsdc_crtc0_soft_reset(lcrtc); + } + + lsdc_wreg32(ldev, LSDC_CRTC0_CFG_REG, val | CFG_OUTPUT_ENABLE); +} + +static void lsdc_crtc0_disable(struct lsdc_crtc *lcrtc) +{ + struct lsdc_device *ldev = lcrtc->ldev; + + lsdc_ureg32_clr(ldev, LSDC_CRTC0_CFG_REG, CFG_OUTPUT_ENABLE); + + udelay(9); +} + +static void lsdc_crtc1_enable(struct lsdc_crtc *lcrtc) +{ + struct lsdc_device *ldev = lcrtc->ldev; + u32 val; + + val = lsdc_rreg32(ldev, LSDC_CRTC1_CFG_REG); + if (val & CRTC_ANCHORED) { + drm_warn(&ldev->base, "%s anchored\n", lcrtc->base.name); + return lsdc_crtc1_soft_reset(lcrtc); + } + + lsdc_wreg32(ldev, LSDC_CRTC1_CFG_REG, val | CFG_OUTPUT_ENABLE); +} + +static void lsdc_crtc1_disable(struct lsdc_crtc *lcrtc) +{ + struct lsdc_device *ldev = lcrtc->ldev; + + lsdc_ureg32_clr(ldev, LSDC_CRTC1_CFG_REG, CFG_OUTPUT_ENABLE); + + udelay(9); +} + +/* All loongson display controller support scanout position hardware */ + +static void lsdc_crtc0_scan_pos(struct lsdc_crtc *lcrtc, int *hpos, int *vpos) +{ + struct lsdc_device *ldev = lcrtc->ldev; + u32 val; + + val = lsdc_rreg32(ldev, LSDC_CRTC0_SCAN_POS_REG); + + *hpos = val >> 16; + *vpos = val & 0xffff; +} + +static void lsdc_crtc1_scan_pos(struct lsdc_crtc *lcrtc, int *hpos, int *vpos) +{ + struct lsdc_device *ldev = lcrtc->ldev; + u32 val; + + val = lsdc_rreg32(ldev, LSDC_CRTC1_SCAN_POS_REG); + + *hpos = val >> 16; + *vpos = val & 0xffff; +} + +static void lsdc_crtc0_enable_vblank(struct lsdc_crtc *lcrtc) +{ + struct lsdc_device *ldev = lcrtc->ldev; + + lsdc_ureg32_set(ldev, LSDC_INT_REG, INT_CRTC0_VSYNC_EN); +} + +static void lsdc_crtc0_disable_vblank(struct lsdc_crtc *lcrtc) +{ + struct lsdc_device *ldev = lcrtc->ldev; + + lsdc_ureg32_clr(ldev, LSDC_INT_REG, INT_CRTC0_VSYNC_EN); +} + +static void lsdc_crtc1_enable_vblank(struct lsdc_crtc *lcrtc) +{ + struct lsdc_device *ldev = lcrtc->ldev; + + lsdc_ureg32_set(ldev, LSDC_INT_REG, INT_CRTC1_VSYNC_EN); +} + +static void lsdc_crtc1_disable_vblank(struct lsdc_crtc *lcrtc) +{ + struct lsdc_device *ldev = lcrtc->ldev; + + lsdc_ureg32_clr(ldev, LSDC_INT_REG, INT_CRTC1_VSYNC_EN); +} + +static void lsdc_crtc0_flip(struct lsdc_crtc *lcrtc) +{ + struct lsdc_device *ldev = lcrtc->ldev; + + lsdc_ureg32_set(ldev, LSDC_CRTC0_CFG_REG, CFG_PAGE_FLIP); +} + +static void lsdc_crtc1_flip(struct lsdc_crtc *lcrtc) +{ + struct lsdc_device *ldev = lcrtc->ldev; + + lsdc_ureg32_set(ldev, LSDC_CRTC1_CFG_REG, CFG_PAGE_FLIP); +} + +/* + * CRTC0 clone from CRTC1 or CRTC1 clone from CRTC0 using hardware logic. + * Hardware engineer say this would help to saving bandwidth on clone mode. + * + * This may useful on custom clone application. + */ + +static void lsdc_crtc0_clone(struct lsdc_crtc *lcrtc) +{ + struct lsdc_device *ldev = lcrtc->ldev; + + lsdc_ureg32_set(ldev, LSDC_CRTC0_CFG_REG, CFG_HW_CLONE); +} + +static void lsdc_crtc1_clone(struct lsdc_crtc *lcrtc) +{ + struct lsdc_device *ldev = lcrtc->ldev; + + lsdc_ureg32_set(ldev, LSDC_CRTC1_CFG_REG, CFG_HW_CLONE); +} + +static void lsdc_crtc0_set_mode(struct lsdc_crtc *lcrtc, + const struct drm_display_mode *mode) +{ + struct lsdc_device *ldev = lcrtc->ldev; + + lsdc_wreg32(ldev, LSDC_CRTC0_HDISPLAY_REG, + (mode->crtc_htotal << 16) | mode->crtc_hdisplay); + + lsdc_wreg32(ldev, LSDC_CRTC0_VDISPLAY_REG, + (mode->crtc_vtotal << 16) | mode->crtc_vdisplay); + + lsdc_wreg32(ldev, LSDC_CRTC0_HSYNC_REG, + (mode->crtc_hsync_end << 16) | mode->crtc_hsync_start | HSYNC_EN); + + lsdc_wreg32(ldev, LSDC_CRTC0_VSYNC_REG, + (mode->crtc_vsync_end << 16) | mode->crtc_vsync_start | VSYNC_EN); +} + +static void lsdc_crtc1_set_mode(struct lsdc_crtc *lcrtc, + const struct drm_display_mode *mode) +{ + struct lsdc_device *ldev = lcrtc->ldev; + + lsdc_wreg32(ldev, LSDC_CRTC1_HDISPLAY_REG, + (mode->crtc_htotal << 16) | mode->crtc_hdisplay); + + lsdc_wreg32(ldev, LSDC_CRTC1_VDISPLAY_REG, + (mode->crtc_vtotal << 16) | mode->crtc_vdisplay); + + lsdc_wreg32(ldev, LSDC_CRTC1_HSYNC_REG, + (mode->crtc_hsync_end << 16) | mode->crtc_hsync_start | HSYNC_EN); + + lsdc_wreg32(ldev, LSDC_CRTC1_VSYNC_REG, + (mode->crtc_vsync_end << 16) | mode->crtc_vsync_start | VSYNC_EN); +} + +/* + * This is required for S3 support. + * + * After resume from suspend, LSDC_CRTCx_CFG_REG (x=0 or 1)is filled with + * garbarge value which may cause the CRTC completely hang. This function + * give a minimal setting to the affected registers. This also override + * the firmware's setting on startup, eliminate potential blinding setting. + * + * Making the CRTC works on our own now, this is similar with the functional + * of GPU POST(Power On Self Test). Only touch CRTC hardware related part. + */ + +static void lsdc_crtc0_reset(struct lsdc_crtc *lcrtc) +{ + struct lsdc_device *ldev = lcrtc->ldev; + struct drm_crtc *crtc = &lcrtc->base; + u32 val; + + val = lsdc_rreg32(ldev, LSDC_CRTC0_CFG_REG); + + /* This help to see what is it */ + drm_dbg(&ldev->base, "value of %s configure register: %x\n", + crtc->name, val); + + /* + * Help the CRTC get out of soft reset sate, as the CRTC is completely + * halt on soft reset mode (BIT(20) = 0). It does not event generate + * vblank, cause vblank wait timeout. This happends when resume from + * S3. + * + * Also give a sane format, after resume from suspend S3, this + * register is filled with garbarge value. A meaningless value may + * also cause the CRTC halt or stall. + */ + + val = CFG_RESET_N | LSDC_PF_XRGB8888; + + lsdc_wreg32(ldev, LSDC_CRTC0_CFG_REG, val); +} + +static void lsdc_crtc1_reset(struct lsdc_crtc *lcrtc) +{ + struct lsdc_device *ldev = lcrtc->ldev; + struct drm_crtc *crtc = &lcrtc->base; + u32 val; + + val = lsdc_rreg32(ldev, LSDC_CRTC1_CFG_REG); + + drm_dbg(&ldev->base, "value of %s configue register: %x\n", + crtc->name, val); + + /* + * Help the CRTC get out of soft reset sate, give a sane format, + * Otherwise it will halt or stall there. + */ + val = CFG_RESET_N | LSDC_PF_XRGB8888; + + lsdc_wreg32(ldev, LSDC_CRTC1_CFG_REG, val); +} + +static const struct lsdc_crtc_hw_ops ls7a1000_crtc_hw_ops[2] = { + { + .enable = lsdc_crtc0_enable, + .disable = lsdc_crtc0_disable, + .enable_vblank = lsdc_crtc0_enable_vblank, + .disable_vblank = lsdc_crtc0_disable_vblank, + .flip = lsdc_crtc0_flip, + .clone = lsdc_crtc0_clone, + .set_mode = lsdc_crtc0_set_mode, + .get_scan_pos = lsdc_crtc0_scan_pos, + .soft_reset = lsdc_crtc0_soft_reset, + .reset = lsdc_crtc0_reset, + }, + { + .enable = lsdc_crtc1_enable, + .disable = lsdc_crtc1_disable, + .enable_vblank = lsdc_crtc1_enable_vblank, + .disable_vblank = lsdc_crtc1_disable_vblank, + .flip = lsdc_crtc1_flip, + .clone = lsdc_crtc1_clone, + .set_mode = lsdc_crtc1_set_mode, + .get_scan_pos = lsdc_crtc1_scan_pos, + .soft_reset = lsdc_crtc1_soft_reset, + .reset = lsdc_crtc1_reset, + }, +}; + +/* + * The 32-bit hardware vblank counter is available since ls7a2000/ls2k2000, + * The counter grow up even the CRTC is being disabled, it will got reset + * if the crtc is being soft reset. + * + * Those registers are also readable for ls7a1000, but its value does not + * change. + */ + +static u32 lsdc_crtc0_get_vblank_count(struct lsdc_crtc *lcrtc) +{ + struct lsdc_device *ldev = lcrtc->ldev; + + return lsdc_rreg32(ldev, LSDC_CRTC0_VSYNC_COUNTER_REG); +} + +static u32 lsdc_crtc1_get_vblank_count(struct lsdc_crtc *lcrtc) +{ + struct lsdc_device *ldev = lcrtc->ldev; + + return lsdc_rreg32(ldev, LSDC_CRTC1_VSYNC_COUNTER_REG); +} + +/* + * The DMA step bit field is available since ls7a2000/ls2k2000, for support + * odd resolutions. But a large DMA step may save bandwidth. Behavior of + * writing thoes bits field on ls7a1000/ls2k1000 is underfined. + */ + +static void lsdc_crtc0_set_dma_step(struct lsdc_crtc *lcrtc, + enum lsdc_dma_steps dma_step) +{ + struct lsdc_device *ldev = lcrtc->ldev; + u32 val = lsdc_rreg32(ldev, LSDC_CRTC0_CFG_REG); + + val &= ~CFG_DMA_STEP_MASK; + val |= dma_step << CFG_DMA_STEP_SHIFT; + + lsdc_wreg32(ldev, LSDC_CRTC0_CFG_REG, val); +} + +static void lsdc_crtc1_set_dma_step(struct lsdc_crtc *lcrtc, + enum lsdc_dma_steps dma_step) +{ + struct lsdc_device *ldev = lcrtc->ldev; + u32 val = lsdc_rreg32(ldev, LSDC_CRTC1_CFG_REG); + + val &= ~CFG_DMA_STEP_MASK; + val |= dma_step << CFG_DMA_STEP_SHIFT; + + lsdc_wreg32(ldev, LSDC_CRTC1_CFG_REG, val); +} + +static const struct lsdc_crtc_hw_ops ls7a2000_crtc_hw_ops[2] = { + { + .enable = lsdc_crtc0_enable, + .disable = lsdc_crtc0_disable, + .enable_vblank = lsdc_crtc0_enable_vblank, + .disable_vblank = lsdc_crtc0_disable_vblank, + .flip = lsdc_crtc0_flip, + .clone = lsdc_crtc0_clone, + .set_mode = lsdc_crtc0_set_mode, + .soft_reset = lsdc_crtc0_soft_reset, + .get_scan_pos = lsdc_crtc0_scan_pos, + .set_dma_step = lsdc_crtc0_set_dma_step, + .get_vblank_counter = lsdc_crtc0_get_vblank_count, + .reset = lsdc_crtc0_reset, + }, + { + .enable = lsdc_crtc1_enable, + .disable = lsdc_crtc1_disable, + .enable_vblank = lsdc_crtc1_enable_vblank, + .disable_vblank = lsdc_crtc1_disable_vblank, + .flip = lsdc_crtc1_flip, + .clone = lsdc_crtc1_clone, + .set_mode = lsdc_crtc1_set_mode, + .get_scan_pos = lsdc_crtc1_scan_pos, + .soft_reset = lsdc_crtc1_soft_reset, + .set_dma_step = lsdc_crtc1_set_dma_step, + .get_vblank_counter = lsdc_crtc1_get_vblank_count, + .reset = lsdc_crtc1_reset, + }, +}; + +static void lsdc_crtc_reset(struct drm_crtc *crtc) +{ + struct lsdc_crtc *lcrtc = to_lsdc_crtc(crtc); + const struct lsdc_crtc_hw_ops *ops = lcrtc->hw_ops; + struct lsdc_crtc_state *priv_crtc_state; + + if (crtc->state) + crtc->funcs->atomic_destroy_state(crtc, crtc->state); + + priv_crtc_state = kzalloc(sizeof(*priv_crtc_state), GFP_KERNEL); + + if (!priv_crtc_state) + __drm_atomic_helper_crtc_reset(crtc, NULL); + else + __drm_atomic_helper_crtc_reset(crtc, &priv_crtc_state->base); + + /* + * Reset the crtc hardware, this is need for S3 support, + * otherwise, wait for vblank timeout may happen. + */ + ops->reset(lcrtc); +} + +static void lsdc_crtc_atomic_destroy_state(struct drm_crtc *crtc, + struct drm_crtc_state *state) +{ + struct lsdc_crtc_state *priv_state = to_lsdc_crtc_state(state); + + __drm_atomic_helper_crtc_destroy_state(&priv_state->base); + + kfree(priv_state); +} + +static struct drm_crtc_state * +lsdc_crtc_atomic_duplicate_state(struct drm_crtc *crtc) +{ + struct lsdc_crtc_state *new_priv_state; + struct lsdc_crtc_state *old_priv_state; + + new_priv_state = kzalloc(sizeof(*new_priv_state), GFP_KERNEL); + if (!new_priv_state) + return NULL; + + __drm_atomic_helper_crtc_duplicate_state(crtc, &new_priv_state->base); + + old_priv_state = to_lsdc_crtc_state(crtc->state); + + memcpy(&new_priv_state->pparms, &old_priv_state->pparms, + sizeof(new_priv_state->pparms)); + + return &new_priv_state->base; +} + +static u32 lsdc_crtc_get_vblank_counter(struct drm_crtc *crtc) +{ + struct lsdc_crtc *lcrtc = to_lsdc_crtc(crtc); + const struct lsdc_crtc_hw_ops *ops = lcrtc->hw_ops; + + return ops->get_vblank_counter(lcrtc); +} + +static int lsdc_crtc_enable_vblank(struct drm_crtc *crtc) +{ + struct lsdc_crtc *lcrtc = to_lsdc_crtc(crtc); + const struct lsdc_crtc_hw_ops *ops = lcrtc->hw_ops; + + ops->enable_vblank(lcrtc); + + return 0; +} + +static void lsdc_crtc_disable_vblank(struct drm_crtc *crtc) +{ + struct lsdc_crtc *lcrtc = to_lsdc_crtc(crtc); + const struct lsdc_crtc_hw_ops *ops = lcrtc->hw_ops; + + ops->disable_vblank(lcrtc); +} + +/* + * CRTC related debugfs + * + * Primary planes and cursor planes are also belong to the CRTC for our case, + * so also append other registers to here, for sake of convenient. + */ + +#define REG_DEF(reg) { \ + .name = __stringify_1(LSDC_##reg##_REG), \ + .offset = LSDC_##reg##_REG, \ +} + +static const struct lsdc_reg32 lsdc_crtc_regs_array[2][21] = { + [0] = { + REG_DEF(CRTC0_CFG), + REG_DEF(CRTC0_FB_ORIGIN), + REG_DEF(CRTC0_PANEL_CONF), + REG_DEF(CRTC0_HDISPLAY), + REG_DEF(CRTC0_HSYNC), + REG_DEF(CRTC0_VDISPLAY), + REG_DEF(CRTC0_VSYNC), + REG_DEF(CRTC0_GAMMA_INDEX), + REG_DEF(CRTC0_GAMMA_DATA), + REG_DEF(CRTC0_SYNC_DEVIATION), + REG_DEF(CRTC0_VSYNC_COUNTER), + REG_DEF(CRTC0_SCAN_POS), + REG_DEF(CRTC0_STRIDE), + REG_DEF(CRTC0_FB1_ADDR_HI), + REG_DEF(CRTC0_FB1_ADDR_LO), + REG_DEF(CRTC0_FB0_ADDR_HI), + REG_DEF(CRTC0_FB0_ADDR_LO), + REG_DEF(CURSOR0_CFG), + REG_DEF(CURSOR0_POSITION), + REG_DEF(CURSOR0_BG_COLOR), + REG_DEF(CURSOR0_FG_COLOR), + }, + [1] = { + REG_DEF(CRTC1_CFG), + REG_DEF(CRTC1_FB_ORIGIN), + REG_DEF(CRTC1_PANEL_CONF), + REG_DEF(CRTC1_HDISPLAY), + REG_DEF(CRTC1_HSYNC), + REG_DEF(CRTC1_VDISPLAY), + REG_DEF(CRTC1_VSYNC), + REG_DEF(CRTC1_GAMMA_INDEX), + REG_DEF(CRTC1_GAMMA_DATA), + REG_DEF(CRTC1_SYNC_DEVIATION), + REG_DEF(CRTC1_VSYNC_COUNTER), + REG_DEF(CRTC1_SCAN_POS), + REG_DEF(CRTC1_STRIDE), + REG_DEF(CRTC1_FB1_ADDR_HI), + REG_DEF(CRTC1_FB1_ADDR_LO), + REG_DEF(CRTC1_FB0_ADDR_HI), + REG_DEF(CRTC1_FB0_ADDR_LO), + REG_DEF(CURSOR1_CFG), + REG_DEF(CURSOR1_POSITION), + REG_DEF(CURSOR1_BG_COLOR), + REG_DEF(CURSOR1_FG_COLOR), + }, +}; + +static int lsdc_crtc_show_regs(struct seq_file *m, void *arg) +{ + struct drm_info_node *node = (struct drm_info_node *)m->private; + struct lsdc_crtc *lcrtc = (struct lsdc_crtc *)node->info_ent->data; + struct lsdc_device *ldev = lcrtc->ldev; + unsigned int i; + + for (i = 0; i < lcrtc->nreg; i++) { + const struct lsdc_reg32 *preg = &lcrtc->preg[i]; + u32 offset = preg->offset; + + seq_printf(m, "%s (0x%04x): 0x%08x\n", + preg->name, offset, lsdc_rreg32(ldev, offset)); + } + + return 0; +} + +static int lsdc_crtc_show_scan_position(struct seq_file *m, void *arg) +{ + struct drm_info_node *node = (struct drm_info_node *)m->private; + struct lsdc_crtc *lcrtc = (struct lsdc_crtc *)node->info_ent->data; + const struct lsdc_crtc_hw_ops *ops = lcrtc->hw_ops; + int x, y; + + ops->get_scan_pos(lcrtc, &x, &y); + + seq_printf(m, "scanout position: x: %08u, y: %08u\n", x, y); + + return 0; +} + +static int lsdc_crtc_show_vblank_counter(struct seq_file *m, void *arg) +{ + struct drm_info_node *node = (struct drm_info_node *)m->private; + struct lsdc_crtc *lcrtc = (struct lsdc_crtc *)node->info_ent->data; + const struct lsdc_crtc_hw_ops *ops = lcrtc->hw_ops; + + if (ops->get_vblank_counter) + seq_printf(m, "%s vblank counter: %08u\n\n", + lcrtc->base.name, + ops->get_vblank_counter(lcrtc)); + + return 0; +} + +static int lsdc_pixpll_show_clock(struct seq_file *m, void *arg) +{ + struct drm_info_node *node = (struct drm_info_node *)m->private; + struct lsdc_crtc *lcrtc = (struct lsdc_crtc *)node->info_ent->data; + struct lsdc_pixpll *pixpll = &lcrtc->pixpll; + const struct lsdc_pixpll_funcs *funcs = pixpll->funcs; + struct drm_crtc *crtc = &lcrtc->base; + struct drm_display_mode *mode = &crtc->state->mode; + struct drm_printer printer = drm_seq_file_printer(m); + unsigned int out_khz; + + out_khz = funcs->get_rate(pixpll); + + seq_printf(m, "%s: %dx%d@%d\n", crtc->name, + mode->hdisplay, mode->vdisplay, drm_mode_vrefresh(mode)); + + seq_printf(m, "Pixel clock required: %d kHz\n", mode->clock); + seq_printf(m, "Actual frequency output: %u kHz\n", out_khz); + seq_printf(m, "Diff: %d kHz\n", out_khz - mode->clock); + + funcs->print(pixpll, &printer); + + return 0; +} + +static struct drm_info_list lsdc_crtc_debugfs_list[2][4] = { + [0] = { + { "regs", lsdc_crtc_show_regs, 0, NULL }, + { "pixclk", lsdc_pixpll_show_clock, 0, NULL }, + { "scanpos", lsdc_crtc_show_scan_position, 0, NULL }, + { "vblanks", lsdc_crtc_show_vblank_counter, 0, NULL }, + }, + [1] = { + { "regs", lsdc_crtc_show_regs, 0, NULL }, + { "pixclk", lsdc_pixpll_show_clock, 0, NULL }, + { "scanpos", lsdc_crtc_show_scan_position, 0, NULL }, + { "vblanks", lsdc_crtc_show_vblank_counter, 0, NULL }, + }, +}; + +/* operate manually */ + +static int lsdc_crtc_man_op_show(struct seq_file *m, void *data) +{ + seq_puts(m, "soft_reset: soft reset this CRTC\n"); + seq_puts(m, "enable: enable this CRTC\n"); + seq_puts(m, "disable: disable this CRTC\n"); + seq_puts(m, "flip: trigger the page flip\n"); + seq_puts(m, "clone: clone the another crtc with hardware logic\n"); + + return 0; +} + +static int lsdc_crtc_man_op_open(struct inode *inode, struct file *file) +{ + struct drm_crtc *crtc = inode->i_private; + + return single_open(file, lsdc_crtc_man_op_show, crtc); +} + +static ssize_t lsdc_crtc_man_op_write(struct file *file, + const char __user *ubuf, + size_t len, + loff_t *offp) +{ + struct seq_file *m = file->private_data; + struct lsdc_crtc *lcrtc = m->private; + const struct lsdc_crtc_hw_ops *ops = lcrtc->hw_ops; + + char buf[16]; + + if (len > sizeof(buf) - 1) + return -EINVAL; + + if (copy_from_user(buf, ubuf, len)) + return -EFAULT; + + buf[len] = '\0'; + + if (sysfs_streq(buf, "soft_reset")) + ops->soft_reset(lcrtc); + else if (sysfs_streq(buf, "enable")) + ops->enable(lcrtc); + else if (sysfs_streq(buf, "disable")) + ops->disable(lcrtc); + else if (sysfs_streq(buf, "flip")) + ops->flip(lcrtc); + else if (sysfs_streq(buf, "clone")) + ops->clone(lcrtc); + + return len; +} + +static const struct file_operations lsdc_crtc_man_op_fops = { + .owner = THIS_MODULE, + .open = lsdc_crtc_man_op_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = lsdc_crtc_man_op_write, +}; + +static int lsdc_crtc_late_register(struct drm_crtc *crtc) +{ + struct lsdc_display_pipe *dispipe = crtc_to_display_pipe(crtc); + struct lsdc_crtc *lcrtc = to_lsdc_crtc(crtc); + struct drm_minor *minor = crtc->dev->primary; + unsigned int index = dispipe->index; + unsigned int i; + + lcrtc->preg = lsdc_crtc_regs_array[index]; + lcrtc->nreg = ARRAY_SIZE(lsdc_crtc_regs_array[index]); + lcrtc->p_info_list = lsdc_crtc_debugfs_list[index]; + lcrtc->n_info_list = ARRAY_SIZE(lsdc_crtc_debugfs_list[index]); + + for (i = 0; i < lcrtc->n_info_list; ++i) + lcrtc->p_info_list[i].data = lcrtc; + + drm_debugfs_create_files(lcrtc->p_info_list, + lcrtc->n_info_list, + crtc->debugfs_entry, + minor); + + /* supported manual operations */ + debugfs_create_file("ops", 0644, crtc->debugfs_entry, lcrtc, + &lsdc_crtc_man_op_fops); + + return 0; +} + +static void lsdc_crtc_atomic_print_state(struct drm_printer *p, + const struct drm_crtc_state *state) +{ + const struct lsdc_crtc_state *priv_state; + const struct lsdc_pixpll_parms *pparms; + + priv_state = container_of_const(state, struct lsdc_crtc_state, base); + pparms = &priv_state->pparms; + + drm_printf(p, "\tInput clock divider = %u\n", pparms->div_ref); + drm_printf(p, "\tMedium clock Multiplier = %u\n", pparms->loopc); + drm_printf(p, "\tOutput clock divider = %u\n", pparms->div_out); +} + +static const struct drm_crtc_funcs ls7a1000_crtc_funcs = { + .reset = lsdc_crtc_reset, + .destroy = drm_crtc_cleanup, + .set_config = drm_atomic_helper_set_config, + .page_flip = drm_atomic_helper_page_flip, + .atomic_duplicate_state = lsdc_crtc_atomic_duplicate_state, + .atomic_destroy_state = lsdc_crtc_atomic_destroy_state, + .late_register = lsdc_crtc_late_register, + .enable_vblank = lsdc_crtc_enable_vblank, + .disable_vblank = lsdc_crtc_disable_vblank, + .get_vblank_timestamp = drm_crtc_vblank_helper_get_vblank_timestamp, + .atomic_print_state = lsdc_crtc_atomic_print_state, +}; + +static const struct drm_crtc_funcs ls7a2000_crtc_funcs = { + .reset = lsdc_crtc_reset, + .destroy = drm_crtc_cleanup, + .set_config = drm_atomic_helper_set_config, + .page_flip = drm_atomic_helper_page_flip, + .atomic_duplicate_state = lsdc_crtc_atomic_duplicate_state, + .atomic_destroy_state = lsdc_crtc_atomic_destroy_state, + .late_register = lsdc_crtc_late_register, + .get_vblank_counter = lsdc_crtc_get_vblank_counter, + .enable_vblank = lsdc_crtc_enable_vblank, + .disable_vblank = lsdc_crtc_disable_vblank, + .get_vblank_timestamp = drm_crtc_vblank_helper_get_vblank_timestamp, + .atomic_print_state = lsdc_crtc_atomic_print_state, +}; + +static enum drm_mode_status +lsdc_crtc_mode_valid(struct drm_crtc *crtc, const struct drm_display_mode *mode) +{ + struct drm_device *ddev = crtc->dev; + struct lsdc_device *ldev = to_lsdc(ddev); + const struct lsdc_desc *descp = ldev->descp; + unsigned int pitch; + + if (mode->hdisplay > descp->max_width) + return MODE_BAD_HVALUE; + + if (mode->vdisplay > descp->max_height) + return MODE_BAD_VVALUE; + + if (mode->clock > descp->max_pixel_clk) { + drm_dbg_kms(ddev, "mode %dx%d, pixel clock=%d is too high\n", + mode->hdisplay, mode->vdisplay, mode->clock); + return MODE_CLOCK_HIGH; + } + + /* 4 for DRM_FORMAT_XRGB8888 */ + pitch = mode->hdisplay * 4; + + if (pitch % descp->pitch_align) { + drm_dbg_kms(ddev, "aligned to %u bytes is required: %u\n", + descp->pitch_align, pitch); + return MODE_BAD_WIDTH; + } + + return MODE_OK; +} + +static int lsdc_pixpll_atomic_check(struct drm_crtc *crtc, + struct drm_crtc_state *state) +{ + struct lsdc_crtc *lcrtc = to_lsdc_crtc(crtc); + struct lsdc_pixpll *pixpll = &lcrtc->pixpll; + const struct lsdc_pixpll_funcs *pfuncs = pixpll->funcs; + struct lsdc_crtc_state *priv_state = to_lsdc_crtc_state(state); + unsigned int clock = state->mode.clock; + int ret; + + ret = pfuncs->compute(pixpll, clock, &priv_state->pparms); + if (ret) { + drm_warn(crtc->dev, "find PLL parms for %ukHz failed\n", clock); + return -EINVAL; + } + + return 0; +} + +static int lsdc_crtc_helper_atomic_check(struct drm_crtc *crtc, + struct drm_atomic_state *state) +{ + struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc); + + if (!crtc_state->enable) + return 0; + + return lsdc_pixpll_atomic_check(crtc, crtc_state); +} + +static void lsdc_crtc_mode_set_nofb(struct drm_crtc *crtc) +{ + struct lsdc_crtc *lcrtc = to_lsdc_crtc(crtc); + const struct lsdc_crtc_hw_ops *crtc_hw_ops = lcrtc->hw_ops; + struct lsdc_pixpll *pixpll = &lcrtc->pixpll; + const struct lsdc_pixpll_funcs *pixpll_funcs = pixpll->funcs; + struct drm_crtc_state *state = crtc->state; + struct drm_display_mode *mode = &state->mode; + struct lsdc_crtc_state *priv_state = to_lsdc_crtc_state(state); + + pixpll_funcs->update(pixpll, &priv_state->pparms); + + if (crtc_hw_ops->set_dma_step) { + unsigned int width_in_bytes = mode->hdisplay * 4; + enum lsdc_dma_steps dma_step; + + /* + * Using large dma step as much as possible, for improving + * hardware DMA efficiency. + */ + if (width_in_bytes % 256 == 0) + dma_step = LSDC_DMA_STEP_256_BYTES; + else if (width_in_bytes % 128 == 0) + dma_step = LSDC_DMA_STEP_128_BYTES; + else if (width_in_bytes % 64 == 0) + dma_step = LSDC_DMA_STEP_64_BYTES; + else /* width_in_bytes % 32 == 0 */ + dma_step = LSDC_DMA_STEP_32_BYTES; + + crtc_hw_ops->set_dma_step(lcrtc, dma_step); + } + + crtc_hw_ops->set_mode(lcrtc, mode); +} + +static void lsdc_crtc_send_vblank(struct drm_crtc *crtc) +{ + struct drm_device *ddev = crtc->dev; + unsigned long flags; + + if (!crtc->state || !crtc->state->event) + return; + + drm_dbg(ddev, "send vblank manually\n"); + + spin_lock_irqsave(&ddev->event_lock, flags); + drm_crtc_send_vblank_event(crtc, crtc->state->event); + crtc->state->event = NULL; + spin_unlock_irqrestore(&ddev->event_lock, flags); +} + +static void lsdc_crtc_atomic_enable(struct drm_crtc *crtc, + struct drm_atomic_state *state) +{ + struct lsdc_crtc *lcrtc = to_lsdc_crtc(crtc); + const struct lsdc_crtc_hw_ops *ops = lcrtc->hw_ops; + + drm_crtc_vblank_on(crtc); + + drm_dbg(crtc->dev, "%s enable\n", crtc->name); + + ops->enable(lcrtc); +} + +static void lsdc_crtc_atomic_disable(struct drm_crtc *crtc, + struct drm_atomic_state *state) +{ + struct lsdc_crtc *lcrtc = to_lsdc_crtc(crtc); + const struct lsdc_crtc_hw_ops *ops = lcrtc->hw_ops; + + drm_crtc_vblank_off(crtc); + + ops->disable(lcrtc); + + drm_dbg(crtc->dev, "%s disable\n", crtc->name); + + /* + * Make sure we issue a vblank event after disabling the CRTC if + * someone was waiting it. + */ + lsdc_crtc_send_vblank(crtc); +} + +static void lsdc_crtc_atomic_flush(struct drm_crtc *crtc, + struct drm_atomic_state *state) +{ + spin_lock_irq(&crtc->dev->event_lock); + if (crtc->state->event) { + if (drm_crtc_vblank_get(crtc) == 0) + drm_crtc_arm_vblank_event(crtc, crtc->state->event); + else + drm_crtc_send_vblank_event(crtc, crtc->state->event); + crtc->state->event = NULL; + } + spin_unlock_irq(&crtc->dev->event_lock); +} + +static bool lsdc_crtc_get_scanout_position(struct drm_crtc *crtc, + bool in_vblank_irq, + int *vpos, + int *hpos, + ktime_t *stime, + ktime_t *etime, + const struct drm_display_mode *mode) +{ + struct lsdc_crtc *lcrtc = to_lsdc_crtc(crtc); + const struct lsdc_crtc_hw_ops *ops = lcrtc->hw_ops; + int vsw, vbp, vactive_start, vactive_end, vfp_end; + int x, y; + + vsw = mode->crtc_vsync_end - mode->crtc_vsync_start; + vbp = mode->crtc_vtotal - mode->crtc_vsync_end; + + vactive_start = vsw + vbp + 1; + vactive_end = vactive_start + mode->crtc_vdisplay; + + /* last scan line before VSYNC */ + vfp_end = mode->crtc_vtotal; + + if (stime) + *stime = ktime_get(); + + ops->get_scan_pos(lcrtc, &x, &y); + + if (y > vactive_end) + y = y - vfp_end - vactive_start; + else + y -= vactive_start; + + *vpos = y; + *hpos = x; + + if (etime) + *etime = ktime_get(); + + return true; +} + +static const struct drm_crtc_helper_funcs lsdc_crtc_helper_funcs = { + .mode_valid = lsdc_crtc_mode_valid, + .mode_set_nofb = lsdc_crtc_mode_set_nofb, + .atomic_enable = lsdc_crtc_atomic_enable, + .atomic_disable = lsdc_crtc_atomic_disable, + .atomic_check = lsdc_crtc_helper_atomic_check, + .atomic_flush = lsdc_crtc_atomic_flush, + .get_scanout_position = lsdc_crtc_get_scanout_position, +}; + +int ls7a1000_crtc_init(struct drm_device *ddev, + struct drm_crtc *crtc, + struct drm_plane *primary, + struct drm_plane *cursor, + unsigned int index) +{ + struct lsdc_crtc *lcrtc = to_lsdc_crtc(crtc); + int ret; + + ret = lsdc_pixpll_init(&lcrtc->pixpll, ddev, index); + if (ret) { + drm_err(ddev, "crtc init with pll failed: %d\n", ret); + return ret; + } + + lcrtc->ldev = to_lsdc(ddev); + lcrtc->hw_ops = &ls7a1000_crtc_hw_ops[index]; + + ret = drm_crtc_init_with_planes(ddev, + crtc, + primary, + cursor, + &ls7a1000_crtc_funcs, + "CRTC-%d", + index); + if (ret) { + drm_err(ddev, "crtc init with planes failed: %d\n", ret); + return ret; + } + + drm_crtc_helper_add(crtc, &lsdc_crtc_helper_funcs); + + ret = drm_mode_crtc_set_gamma_size(crtc, 256); + if (ret) + return ret; + + drm_crtc_enable_color_mgmt(crtc, 0, false, 256); + + return 0; +} + +int ls7a2000_crtc_init(struct drm_device *ddev, + struct drm_crtc *crtc, + struct drm_plane *primary, + struct drm_plane *cursor, + unsigned int index) +{ + struct lsdc_crtc *lcrtc = to_lsdc_crtc(crtc); + int ret; + + ret = lsdc_pixpll_init(&lcrtc->pixpll, ddev, index); + if (ret) { + drm_err(ddev, "crtc init with pll failed: %d\n", ret); + return ret; + } + + lcrtc->ldev = to_lsdc(ddev); + lcrtc->hw_ops = &ls7a2000_crtc_hw_ops[index]; + + ret = drm_crtc_init_with_planes(ddev, + crtc, + primary, + cursor, + &ls7a2000_crtc_funcs, + "CRTC-%d", + index); + if (ret) { + drm_err(ddev, "crtc init with planes failed: %d\n", ret); + return ret; + } + + drm_crtc_helper_add(crtc, &lsdc_crtc_helper_funcs); + + ret = drm_mode_crtc_set_gamma_size(crtc, 256); + if (ret) + return ret; + + drm_crtc_enable_color_mgmt(crtc, 0, false, 256); + + return 0; +} diff --git a/drivers/gpu/drm/loongson/lsdc_debugfs.c b/drivers/gpu/drm/loongson/lsdc_debugfs.c new file mode 100644 index 000000000000..9ad2c5a0add2 --- /dev/null +++ b/drivers/gpu/drm/loongson/lsdc_debugfs.c @@ -0,0 +1,91 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2023 Loongson Technology Corporation Limited + */ + +#include + +#include "lsdc_benchmark.h" +#include "lsdc_drv.h" +#include "lsdc_gem.h" +#include "lsdc_probe.h" +#include "lsdc_ttm.h" + +/* device level debugfs */ + +static int lsdc_identify(struct seq_file *m, void *arg) +{ + struct drm_info_node *node = (struct drm_info_node *)m->private; + struct lsdc_device *ldev = (struct lsdc_device *)node->info_ent->data; + const struct loongson_gfx_desc *gfx = to_loongson_gfx(ldev->descp); + u8 impl, rev; + + loongson_cpu_get_prid(&impl, &rev); + + seq_printf(m, "Running on cpu 0x%x, cpu revision: 0x%x\n", + impl, rev); + + seq_printf(m, "Contained in: %s\n", gfx->model); + + return 0; +} + +static int lsdc_show_mm(struct seq_file *m, void *arg) +{ + struct drm_info_node *node = (struct drm_info_node *)m->private; + struct drm_device *ddev = node->minor->dev; + struct drm_printer p = drm_seq_file_printer(m); + + drm_mm_print(&ddev->vma_offset_manager->vm_addr_space_mm, &p); + + return 0; +} + +static int lsdc_show_gfxpll_clock(struct seq_file *m, void *arg) +{ + struct drm_info_node *node = (struct drm_info_node *)m->private; + struct lsdc_device *ldev = (struct lsdc_device *)node->info_ent->data; + struct drm_printer printer = drm_seq_file_printer(m); + struct loongson_gfxpll *gfxpll = ldev->gfxpll; + + gfxpll->funcs->print(gfxpll, &printer, true); + + return 0; +} + +static int lsdc_show_benchmark(struct seq_file *m, void *arg) +{ + struct drm_info_node *node = (struct drm_info_node *)m->private; + struct lsdc_device *ldev = (struct lsdc_device *)node->info_ent->data; + struct drm_printer printer = drm_seq_file_printer(m); + + lsdc_show_benchmark_copy(ldev, &printer); + + return 0; +} + +static struct drm_info_list lsdc_debugfs_list[] = { + { "chips", lsdc_identify, 0, NULL }, + { "clocks", lsdc_show_gfxpll_clock, 0, NULL }, + { "mm", lsdc_show_mm, 0, NULL }, + { "bos", lsdc_show_buffer_object, 0, NULL }, + { "benchmark", lsdc_show_benchmark, 0, NULL }, +}; + +void lsdc_debugfs_init(struct drm_minor *minor) +{ + struct drm_device *ddev = minor->dev; + struct lsdc_device *ldev = to_lsdc(ddev); + unsigned int N = ARRAY_SIZE(lsdc_debugfs_list); + unsigned int i; + + for (i = 0; i < N; ++i) + lsdc_debugfs_list[i].data = ldev; + + drm_debugfs_create_files(lsdc_debugfs_list, + N, + minor->debugfs_root, + minor); + + lsdc_ttm_debugfs_init(ldev); +} diff --git a/drivers/gpu/drm/loongson/lsdc_device.c b/drivers/gpu/drm/loongson/lsdc_device.c new file mode 100644 index 000000000000..b4152f228beb --- /dev/null +++ b/drivers/gpu/drm/loongson/lsdc_device.c @@ -0,0 +1,104 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2023 Loongson Technology Corporation Limited + */ + +#include + +#include "lsdc_drv.h" + +static const struct lsdc_kms_funcs ls7a1000_kms_funcs = { + .create_i2c = lsdc_create_i2c_chan, + .irq_handler = ls7a1000_dc_irq_handler, + .output_init = ls7a1000_output_init, + .cursor_plane_init = ls7a1000_cursor_plane_init, + .primary_plane_init = lsdc_primary_plane_init, + .crtc_init = ls7a1000_crtc_init, +}; + +static const struct lsdc_kms_funcs ls7a2000_kms_funcs = { + .create_i2c = lsdc_create_i2c_chan, + .irq_handler = ls7a2000_dc_irq_handler, + .output_init = ls7a2000_output_init, + .cursor_plane_init = ls7a2000_cursor_plane_init, + .primary_plane_init = lsdc_primary_plane_init, + .crtc_init = ls7a2000_crtc_init, +}; + +static const struct loongson_gfx_desc ls7a1000_gfx = { + .dc = { + .num_of_crtc = 2, + .max_pixel_clk = 200000, + .max_width = 2048, + .max_height = 2048, + .num_of_hw_cursor = 1, + .hw_cursor_w = 32, + .hw_cursor_h = 32, + .pitch_align = 256, + .mc_bits = 40, + .has_vblank_counter = false, + .funcs = &ls7a1000_kms_funcs, + }, + .conf_reg_base = LS7A1000_CONF_REG_BASE, + .gfxpll = { + .reg_offset = LS7A1000_PLL_GFX_REG, + .reg_size = 8, + }, + .pixpll = { + [0] = { + .reg_offset = LS7A1000_PIXPLL0_REG, + .reg_size = 8, + }, + [1] = { + .reg_offset = LS7A1000_PIXPLL1_REG, + .reg_size = 8, + }, + }, + .chip_id = CHIP_LS7A1000, + .model = "LS7A1000 bridge chipset", +}; + +static const struct loongson_gfx_desc ls7a2000_gfx = { + .dc = { + .num_of_crtc = 2, + .max_pixel_clk = 350000, + .max_width = 4096, + .max_height = 4096, + .num_of_hw_cursor = 2, + .hw_cursor_w = 64, + .hw_cursor_h = 64, + .pitch_align = 64, + .mc_bits = 40, /* Support 48 but using 40 for backward compatibility */ + .has_vblank_counter = true, + .funcs = &ls7a2000_kms_funcs, + }, + .conf_reg_base = LS7A2000_CONF_REG_BASE, + .gfxpll = { + .reg_offset = LS7A2000_PLL_GFX_REG, + .reg_size = 8, + }, + .pixpll = { + [0] = { + .reg_offset = LS7A2000_PIXPLL0_REG, + .reg_size = 8, + }, + [1] = { + .reg_offset = LS7A2000_PIXPLL1_REG, + .reg_size = 8, + }, + }, + .chip_id = CHIP_LS7A2000, + .model = "LS7A2000 bridge chipset", +}; + +const struct lsdc_desc * +lsdc_device_probe(struct pci_dev *pdev, enum loongson_chip_id chip_id) +{ + if (chip_id == CHIP_LS7A1000) + return &ls7a1000_gfx.dc; + + if (chip_id == CHIP_LS7A2000) + return &ls7a2000_gfx.dc; + + return ERR_PTR(-ENODEV); +} diff --git a/drivers/gpu/drm/loongson/lsdc_drv.c b/drivers/gpu/drm/loongson/lsdc_drv.c new file mode 100644 index 000000000000..98e2c28f886f --- /dev/null +++ b/drivers/gpu/drm/loongson/lsdc_drv.c @@ -0,0 +1,495 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2023 Loongson Technology Corporation Limited + */ + +#include + +#include