[v4,2/2] ARM: dts: stm32: fix m4_rproc references to use SCMI
Commit Message
Fixes stm32mp15*-scmi DTS files introduced in [1]:
This patch fixes the node which uses the MCU reset and adds the
missing HOLD_BOOT which is also handled by the SCMI reset service.
This change cannot be applied as a fix on commit [1], the management
of the hold boot impacts also the stm32_rproc driver.
[1] 'commit 5b7e58313a77 ("ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)")'
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
---
Deltas vs previous revision:
- add "/delete-property/ st,syscfg-holdboot;" to fix dtbs_check complain.
---
arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts | 7 +++++--
arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts | 7 +++++--
arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts | 7 +++++--
arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts | 7 +++++--
4 files changed, 20 insertions(+), 8 deletions(-)
@@ -55,8 +55,11 @@ &mdma1 {
resets = <&scmi_reset RST_SCMI_MDMA>;
};
-&mlahb {
- resets = <&scmi_reset RST_SCMI_MCU>;
+&m4_rproc {
+ /delete-property/ st,syscfg-holdboot;
+ resets = <&scmi_reset RST_SCMI_MCU>,
+ <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
+ reset-names = "mcu_rst", "hold_boot";
};
&rcc {
@@ -61,8 +61,11 @@ &mdma1 {
resets = <&scmi_reset RST_SCMI_MDMA>;
};
-&mlahb {
- resets = <&scmi_reset RST_SCMI_MCU>;
+&m4_rproc {
+ /delete-property/ st,syscfg-holdboot;
+ resets = <&scmi_reset RST_SCMI_MCU>,
+ <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
+ reset-names = "mcu_rst", "hold_boot";
};
&rcc {
@@ -60,8 +60,11 @@ &mdma1 {
resets = <&scmi_reset RST_SCMI_MDMA>;
};
-&mlahb {
- resets = <&scmi_reset RST_SCMI_MCU>;
+&m4_rproc {
+ /delete-property/ st,syscfg-holdboot;
+ resets = <&scmi_reset RST_SCMI_MCU>,
+ <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
+ reset-names = "mcu_rst", "hold_boot";
};
&rcc {
@@ -66,8 +66,11 @@ &mdma1 {
resets = <&scmi_reset RST_SCMI_MDMA>;
};
-&mlahb {
- resets = <&scmi_reset RST_SCMI_MCU>;
+&m4_rproc {
+ /delete-property/ st,syscfg-holdboot;
+ resets = <&scmi_reset RST_SCMI_MCU>,
+ <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
+ reset-names = "mcu_rst", "hold_boot";
};
&rcc {