[v1,2/3] dt-bindings: soc: add loongson-2 pm

Message ID 20230517073149.31980-3-zhuyinbo@loongson.cn
State New
Headers
Series soc: loongson2_pm: add power management support |

Commit Message

Yinbo Zhu May 17, 2023, 7:31 a.m. UTC
  Add the Loongson-2 SoC Power Management Controller binding with DT
schema format using json-schema.

Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
---
 .../soc/loongson/loongson,ls2k-pmc.yaml       | 47 +++++++++++++++++++
 MAINTAINERS                                   |  6 +++
 2 files changed, 53 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml
  

Comments

Krzysztof Kozlowski May 17, 2023, 3 p.m. UTC | #1
On 17/05/2023 09:31, Yinbo Zhu wrote:
> Add the Loongson-2 SoC Power Management Controller binding with DT
> schema format using json-schema.
> 
> Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>

...

> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - loongson,ls2k-pmc
> +      - const: syscon
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  suspend-address:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      This option indicate this PM suspend address.

This tells me nothing. Drop "This option indicate this" and rephrase
everything to actually describe this property. Why would the address
differ on given, specific SoC? It looks like you just miss compatibles.
Anyway this needs much more explanation so we can judge whether it fits DT.

> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    pmc: pm@1fe27000 {
> +        compatible = "loongson,ls2k-pmc", "syscon";
> +        reg = <0x1fe27000 0x58>;
> +        interrupt-parent = <&liointc1>;
> +        interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
> +        suspend-address = <0x1c000500>;


Best regards,
Krzysztof
  
Yinbo Zhu May 18, 2023, 3:23 a.m. UTC | #2
在 2023/5/17 下午11:00, Krzysztof Kozlowski 写道:
> On 17/05/2023 09:31, Yinbo Zhu wrote:
>> Add the Loongson-2 SoC Power Management Controller binding with DT
>> schema format using json-schema.
>>
>> Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
> 
> ...
> 
>> +properties:
>> +  compatible:
>> +    items:
>> +      - enum:
>> +          - loongson,ls2k-pmc
>> +      - const: syscon
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +  suspend-address:
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    description:
>> +      This option indicate this PM suspend address.
> 
> This tells me nothing. Drop "This option indicate this" and rephrase
> everything to actually describe this property. Why would the address
> differ on given, specific SoC? It looks like you just miss compatibles.
> Anyway this needs much more explanation so we can judge whether it fits DT.

Hi Krzysztof,

I will add following description about "suspend-address", please review.

The "suspend-address" is a ACPI S3 (Suspend To RAM) firmware entry
address which was jumped from kernel and it's value was dependent on 
specific platform firmware code. In addition, the PM driver need 
according to it to indicate that current SoC whether support ACPI S3.

Thanks.

> 
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - interrupts
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/interrupt-controller/irq.h>
>> +
>> +    pmc: pm@1fe27000 {
>> +        compatible = "loongson,ls2k-pmc", "syscon";
>> +        reg = <0x1fe27000 0x58>;
>> +        interrupt-parent = <&liointc1>;
>> +        interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
>> +        suspend-address = <0x1c000500>;
> 
> 
> Best regards,
> Krzysztof
>
  
Krzysztof Kozlowski May 18, 2023, 7:15 a.m. UTC | #3
On 18/05/2023 05:23, zhuyinbo wrote:
> 
> 
> 在 2023/5/17 下午11:00, Krzysztof Kozlowski 写道:
>> On 17/05/2023 09:31, Yinbo Zhu wrote:
>>> Add the Loongson-2 SoC Power Management Controller binding with DT
>>> schema format using json-schema.
>>>
>>> Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
>>
>> ...
>>
>>> +properties:
>>> +  compatible:
>>> +    items:
>>> +      - enum:
>>> +          - loongson,ls2k-pmc
>>> +      - const: syscon
>>> +
>>> +  reg:
>>> +    maxItems: 1
>>> +
>>> +  interrupts:
>>> +    maxItems: 1
>>> +
>>> +  suspend-address:
>>> +    $ref: /schemas/types.yaml#/definitions/uint32
>>> +    description:
>>> +      This option indicate this PM suspend address.
>>
>> This tells me nothing. Drop "This option indicate this" and rephrase
>> everything to actually describe this property. Why would the address
>> differ on given, specific SoC? It looks like you just miss compatibles.
>> Anyway this needs much more explanation so we can judge whether it fits DT.
> 
> Hi Krzysztof,
> 
> I will add following description about "suspend-address", please review.

Thanks.

> 
> The "suspend-address" is a ACPI S3 (Suspend To RAM) firmware entry

Why do we add properties for ACPI? This does not seem right. Please
reword to skip ACPI stuff, e.g. deep sleep states (Suspend to RAM).


> address which was jumped from kernel and it's value was dependent on 
> specific platform firmware code. 

"entry address which was jumped" <- the address cannot jump. Please
explain who is jumping here - boot CPU? each suspended CPU? I guess the
first as CPUs are offlined, right?

> In addition, the PM driver need 
> according to it to indicate that current SoC whether support ACPI S3.

Skip references to driver.

> 

Best regards,
Krzysztof
  
Yinbo Zhu May 18, 2023, 12:15 p.m. UTC | #4
在 2023/5/18 下午3:15, Krzysztof Kozlowski 写道:
> On 18/05/2023 05:23, zhuyinbo wrote:
>>
>>
>> 在 2023/5/17 下午11:00, Krzysztof Kozlowski 写道:
>>> On 17/05/2023 09:31, Yinbo Zhu wrote:
>>>> Add the Loongson-2 SoC Power Management Controller binding with DT
>>>> schema format using json-schema.
>>>>
>>>> Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
>>>
>>> ...
>>>
>>>> +properties:
>>>> +  compatible:
>>>> +    items:
>>>> +      - enum:
>>>> +          - loongson,ls2k-pmc
>>>> +      - const: syscon
>>>> +
>>>> +  reg:
>>>> +    maxItems: 1
>>>> +
>>>> +  interrupts:
>>>> +    maxItems: 1
>>>> +
>>>> +  suspend-address:
>>>> +    $ref: /schemas/types.yaml#/definitions/uint32
>>>> +    description:
>>>> +      This option indicate this PM suspend address.
>>>
>>> This tells me nothing. Drop "This option indicate this" and rephrase
>>> everything to actually describe this property. Why would the address
>>> differ on given, specific SoC? It looks like you just miss compatibles.
>>> Anyway this needs much more explanation so we can judge whether it fits DT.
>>
>> Hi Krzysztof,
>>
>> I will add following description about "suspend-address", please review.
> 
> Thanks.
> 
>>
>> The "suspend-address" is a ACPI S3 (Suspend To RAM) firmware entry
> 
> Why do we add properties for ACPI? This does not seem right. 


1.  The suspend-address value was dependent on specific platform
     firmware code and it tends to be confiurable. if it is a fixed value
     that seems not friendly or the ACPI S3 will not work.
2. the PM driver need according to it to indicate that current SoC
    whether support ACPI S3, because some Loongson-2 SoC doesn't support
    ACPI S3 but support other ACPI mode, so the PM driver need has a
    check. if no this check and other ACPI mode will not work.

Base on the above two points, this property was necessary.
Using this property "suspend-address" can make the firmware entry
address configurable, and then the kernel can also indicate whether
the current SoC supports S3

In addition, from kernel code perspective, the property
"suspend-address" was to initialize "loongarch_suspend_addr"

S3 call flow:
enter_state -> loongson_suspend_enter -> bios's loongarch_suspend_addr

SYM_FUNC_START(loongson_suspend_enter)
         SETUP_SLEEP
         bl              __flush_cache_all

         /* Pass RA and SP to BIOS */
         addi.d          a1, sp, 0
         la.pcrel        a0, loongson_wakeup_start
         la.pcrel        t0, loongarch_suspend_addr
         ld.d            t0, t0, 0
         jirl            a0, t0, 0 /* Call BIOS's STR sleep routine */


Please
> reword to skip ACPI stuff, e.g. deep sleep states (Suspend to RAM).


Sorry, I don't got your point.

> 
> 
>> address which was jumped from kernel and it's value was dependent on
>> specific platform firmware code.
> 
> "entry address which was jumped" <- the address cannot jump. Please
> explain who is jumping here - boot CPU? each suspended CPU? I guess the
> first as CPUs are offlined, right?

The boot CPU was jumping to firmware and finish remaining process in
firmware that was what ACPI S3 required and other CPUs (No-boot CPU)
have been offline before entering firmware.

> 
>> In addition, the PM driver need
>> according to it to indicate that current SoC whether support ACPI S3.
> 
> Skip references to driver.


Sorry, I don't got your point.  Could you elaborate on it?

Thanks
Yinbo.
  
Krzysztof Kozlowski May 18, 2023, 2:15 p.m. UTC | #5
On 18/05/2023 14:15, zhuyinbo wrote:
> 
> 
> 在 2023/5/18 下午3:15, Krzysztof Kozlowski 写道:
>> On 18/05/2023 05:23, zhuyinbo wrote:
>>>
>>>
>>> 在 2023/5/17 下午11:00, Krzysztof Kozlowski 写道:
>>>> On 17/05/2023 09:31, Yinbo Zhu wrote:
>>>>> Add the Loongson-2 SoC Power Management Controller binding with DT
>>>>> schema format using json-schema.
>>>>>
>>>>> Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
>>>>
>>>> ...
>>>>
>>>>> +properties:
>>>>> +  compatible:
>>>>> +    items:
>>>>> +      - enum:
>>>>> +          - loongson,ls2k-pmc
>>>>> +      - const: syscon
>>>>> +
>>>>> +  reg:
>>>>> +    maxItems: 1
>>>>> +
>>>>> +  interrupts:
>>>>> +    maxItems: 1
>>>>> +
>>>>> +  suspend-address:
>>>>> +    $ref: /schemas/types.yaml#/definitions/uint32
>>>>> +    description:
>>>>> +      This option indicate this PM suspend address.
>>>>
>>>> This tells me nothing. Drop "This option indicate this" and rephrase
>>>> everything to actually describe this property. Why would the address
>>>> differ on given, specific SoC? It looks like you just miss compatibles.
>>>> Anyway this needs much more explanation so we can judge whether it fits DT.
>>>
>>> Hi Krzysztof,
>>>
>>> I will add following description about "suspend-address", please review.
>>
>> Thanks.
>>
>>>
>>> The "suspend-address" is a ACPI S3 (Suspend To RAM) firmware entry
>>
>> Why do we add properties for ACPI? This does not seem right. 
> 
> 
> 1.  The suspend-address value was dependent on specific platform
>      firmware code and it tends to be confiurable. if it is a fixed value
>      that seems not friendly or the ACPI S3 will not work.

> 2. the PM driver need according to it to indicate that current SoC
>     whether support ACPI S3, because some Loongson-2 SoC doesn't support

For this you have dedicated compatibles. Which points to the fact that
you missed them here.

>     ACPI S3 but support other ACPI mode, so the PM driver need has a
>     check. if no this check and other ACPI mode will not work.

Sure, but it is not really relevant to the bindings... or rather: should
not be relevant. Bindings are for hardware or in this case also for
firmware, but not for driver.

> 
> Base on the above two points, this property was necessary.

I did not object in my last response...

> Using this property "suspend-address" can make the firmware entry
> address configurable, and then the kernel can also indicate whether
> the current SoC supports S3
> 
> In addition, from kernel code perspective, the property
> "suspend-address" was to initialize "loongarch_suspend_addr"

Again, how does it matter what kernel does?

> 
> S3 call flow:
> enter_state -> loongson_suspend_enter -> bios's loongarch_suspend_addr
> 
> SYM_FUNC_START(loongson_suspend_enter)
>          SETUP_SLEEP
>          bl              __flush_cache_all
> 
>          /* Pass RA and SP to BIOS */
>          addi.d          a1, sp, 0
>          la.pcrel        a0, loongson_wakeup_start
>          la.pcrel        t0, loongarch_suspend_addr
>          ld.d            t0, t0, 0
>          jirl            a0, t0, 0 /* Call BIOS's STR sleep routine */
> 
> 
> Please
>> reword to skip ACPI stuff, e.g. deep sleep states (Suspend to RAM).
> 
> 
> Sorry, I don't got your point.

You have DT platform, so why do you use it with ACPI in the first place?
If you have ACPI, then please drop all this and make your life easier.

If this is booted without ACPI, which would justify DT, drop the
references to ACPI. I gave you example what to use instead. If you don't
like it, no problem, reword in different way.

> 
>>
>>
>>> address which was jumped from kernel and it's value was dependent on
>>> specific platform firmware code.
>>
>> "entry address which was jumped" <- the address cannot jump. Please
>> explain who is jumping here - boot CPU? each suspended CPU? I guess the
>> first as CPUs are offlined, right?
> 
> The boot CPU was jumping to firmware and finish remaining process in
> firmware that was what ACPI S3 required and other CPUs (No-boot CPU)
> have been offline before entering firmware.

Then fix the description.

> 
>>
>>> In addition, the PM driver need
>>> according to it to indicate that current SoC whether support ACPI S3.
>>
>> Skip references to driver.
> 
> 
> Sorry, I don't got your point.  Could you elaborate on it?

If you change driver, you change bindings? No.

Bindings are for hardware, not for driver. Whatever your driver is doing
usually does not matter for the bindings and should not be included.

Best regards,
Krzysztof
  
Yinbo Zhu May 19, 2023, 6:52 a.m. UTC | #6
在 2023/5/18 下午10:15, Krzysztof Kozlowski 写道:
> On 18/05/2023 14:15, zhuyinbo wrote:
>>
>>
>> 在 2023/5/18 下午3:15, Krzysztof Kozlowski 写道:
>>> On 18/05/2023 05:23, zhuyinbo wrote:
>>>>
>>>>
>>>> 在 2023/5/17 下午11:00, Krzysztof Kozlowski 写道:
>>>>> On 17/05/2023 09:31, Yinbo Zhu wrote:
>>>>>> Add the Loongson-2 SoC Power Management Controller binding with DT
>>>>>> schema format using json-schema.
>>>>>>
>>>>>> Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
>>>>>
>>>>> ...
>>>>>
>>>>>> +properties:
>>>>>> +  compatible:
>>>>>> +    items:
>>>>>> +      - enum:
>>>>>> +          - loongson,ls2k-pmc
>>>>>> +      - const: syscon
>>>>>> +
>>>>>> +  reg:
>>>>>> +    maxItems: 1
>>>>>> +
>>>>>> +  interrupts:
>>>>>> +    maxItems: 1
>>>>>> +
>>>>>> +  suspend-address:
>>>>>> +    $ref: /schemas/types.yaml#/definitions/uint32
>>>>>> +    description:
>>>>>> +      This option indicate this PM suspend address.
>>>>>
>>>>> This tells me nothing. Drop "This option indicate this" and rephrase
>>>>> everything to actually describe this property. Why would the address
>>>>> differ on given, specific SoC? It looks like you just miss compatibles.
>>>>> Anyway this needs much more explanation so we can judge whether it fits DT.
>>>>
>>>> Hi Krzysztof,
>>>>
>>>> I will add following description about "suspend-address", please review.
>>>
>>> Thanks.
>>>
>>>>
>>>> The "suspend-address" is a ACPI S3 (Suspend To RAM) firmware entry
>>>
>>> Why do we add properties for ACPI? This does not seem right.
>>
>>
>> 1.  The suspend-address value was dependent on specific platform
>>       firmware code and it tends to be confiurable. if it is a fixed value
>>       that seems not friendly or the ACPI S3 will not work.
> 
>> 2. the PM driver need according to it to indicate that current SoC
>>      whether support ACPI S3, because some Loongson-2 SoC doesn't support
> 
> For this you have dedicated compatibles. Which points to the fact that
> you missed them here.


Sorry, I may not have explained it clearly before. In fact, this is a
consideration for the future, and currently all SoC supports s3.
Add corresponding compatibles as needed in the future.

> 
>>      ACPI S3 but support other ACPI mode, so the PM driver need has a
>>      check. if no this check and other ACPI mode will not work.
> 
> Sure, but it is not really relevant to the bindings... or rather: should
> not be relevant. Bindings are for hardware or in this case also for
> firmware, but not for driver.

okay, I got it.

> 
>>
>> Base on the above two points, this property was necessary.
> 
> I did not object in my last response...


Yes, but I misunderstood your meaning before.

> 
>> Using this property "suspend-address" can make the firmware entry
>> address configurable, and then the kernel can also indicate whether
>> the current SoC supports S3
>>
>> In addition, from kernel code perspective, the property
>> "suspend-address" was to initialize "loongarch_suspend_addr"
> 
> Again, how does it matter what kernel does?


okay, I got it.

> 
>>
>> S3 call flow:
>> enter_state -> loongson_suspend_enter -> bios's loongarch_suspend_addr
>>
>> SYM_FUNC_START(loongson_suspend_enter)
>>           SETUP_SLEEP
>>           bl              __flush_cache_all
>>
>>           /* Pass RA and SP to BIOS */
>>           addi.d          a1, sp, 0
>>           la.pcrel        a0, loongson_wakeup_start
>>           la.pcrel        t0, loongarch_suspend_addr
>>           ld.d            t0, t0, 0
>>           jirl            a0, t0, 0 /* Call BIOS's STR sleep routine */
>>
>>
>> Please
>>> reword to skip ACPI stuff, e.g. deep sleep states (Suspend to RAM).
>>
>>
>> Sorry, I don't got your point.
> 
> You have DT platform, so why do you use it with ACPI in the first place?
> If you have ACPI, then please drop all this and make your life easier.


okay, I got it, I will reword to skip ACPI stuff in bindings for 
"suspend-address" property description.

> 
> If this is booted without ACPI, which would justify DT, drop the
> references to ACPI. I gave you example what to use instead. If you don't
> like it, no problem, reword in different way.

okay, I got it.

> 
>>
>>>
>>>
>>>> address which was jumped from kernel and it's value was dependent on
>>>> specific platform firmware code.
>>>
>>> "entry address which was jumped" <- the address cannot jump. Please
>>> explain who is jumping here - boot CPU? each suspended CPU? I guess the
>>> first as CPUs are offlined, right?
>>
>> The boot CPU was jumping to firmware and finish remaining process in
>> firmware that was what ACPI S3 required and other CPUs (No-boot CPU)
>> have been offline before entering firmware.
> 
> Then fix the description.

okay, I got it.

> 
>>
>>>
>>>> In addition, the PM driver need
>>>> according to it to indicate that current SoC whether support ACPI S3.
>>>
>>> Skip references to driver.
>>
>>
>> Sorry, I don't got your point.  Could you elaborate on it?
> 
> If you change driver, you change bindings? No.
> 
> Bindings are for hardware, not for driver. Whatever your driver is doing
> usually does not matter for the bindings and should not be included.


okay, I got it. I will skip references to driver in bindings for 
"suspend-address" property description.

Thanks.
  

Patch

diff --git a/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml b/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml
new file mode 100644
index 000000000000..a52bfa5e3eb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml
@@ -0,0 +1,47 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/loongson/loongson,ls2k-pmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-2 Power Manager controller
+
+maintainers:
+  - Yinbo Zhu <zhuyinbo@loongson.cn>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - loongson,ls2k-pmc
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  suspend-address:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      This option indicate this PM suspend address.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pmc: pm@1fe27000 {
+        compatible = "loongson,ls2k-pmc", "syscon";
+        reg = <0x1fe27000 0x58>;
+        interrupt-parent = <&liointc1>;
+        interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+        suspend-address = <0x1c000500>;
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 7a91f14cad2e..bcd05f1fa5c1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12190,6 +12190,12 @@  S:	Maintained
 F:	Documentation/devicetree/bindings/hwinfo/loongson,ls2k-chipid.yaml
 F:	drivers/soc/loongson/loongson2_guts.c
 
+LOONGSON-2 SOC SERIES PM DRIVER
+M:	Yinbo Zhu <zhuyinbo@loongson.cn>
+L:	linux-pm@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml
+
 LOONGSON-2 SOC SERIES PINCTRL DRIVER
 M:	zhanghongchen <zhanghongchen@loongson.cn>
 M:	Yinbo Zhu <zhuyinbo@loongson.cn>