diff mbox series

[v3,03/10] arm64: dts: qcom: qdu1000: Add properties to qfprom for multi channel DDR

Message ID 20230512122134.24339-4-quic_kbajaj@quicinc.com
State New
Headers
Series soc: qcom: llcc: Add support for QDU1000/QRU1000 |

Commit Message

Komal Bajaj May 12, 2023, 12:21 p.m. UTC 
  Add properties to the qfprom node for multi channel DDR.

Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qdu1000.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

--
2.17.1

Comments

Krzysztof Kozlowski May 12, 2023, 4:58 p.m. UTC | #1 
On 12/05/2023 14:21, Komal Bajaj wrote:
> Add properties to the qfprom node for multi channel DDR.
> 
> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>

DTS goes to the end of patchset. Better - to separate patchset with
links to bindings.

Subject: drop redundant pieces, it's too long without actual need.
"properties to" can be skipped.

> ---
>  arch/arm64/boot/dts/qcom/qdu1000.dtsi | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> index 734438113bba..418644f396bc 100644
> --- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> @@ -1333,6 +1333,18 @@
>  			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
>  			multi-ch-bit-off = <24 2>;
>  		};
> +
> +		qfprom: efuse@221c8000 {
> +			compatible = "qcom,qdu1000-qfprom", "qcom,qfprom";
> +			reg = <0 0x221c8000 0 0x1000>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +
> +			multi_chan_ddr: multi_chan_ddr@12b {

No underscores in node names.



Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
index 734438113bba..418644f396bc 100644
--- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
+++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -1333,6 +1333,18 @@ 
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 			multi-ch-bit-off = <24 2>;
 		};
+
+		qfprom: efuse@221c8000 {
+			compatible = "qcom,qdu1000-qfprom", "qcom,qfprom";
+			reg = <0 0x221c8000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			multi_chan_ddr: multi_chan_ddr@12b {
+				reg = <0x12b 0x1>;
+				bits = <0 2>;
+			};
+		};
 	};

 	timer {