From patchwork Fri May 12 13:11:40 2023
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
X-Patchwork-Submitter: Neil Armstrong <neil.armstrong@linaro.org>
X-Patchwork-Id: 93199
Return-Path: <linux-kernel-owner@vger.kernel.org>
Delivered-To: ouuuleilei@gmail.com
Received: by 2002:a59:b0ea:0:b0:3b6:4342:cba0 with SMTP id b10csp5098587vqo;
        Fri, 12 May 2023 06:18:06 -0700 (PDT)
X-Google-Smtp-Source: 
 ACHHUZ7KYM/bCpfpf+xsEp2gDu2vwFKaLHemlcjatk+dZjCz+KHpXQ7PDpm0cx+yyxtI5rMNxgeK
X-Received: by 2002:a05:6a20:a115:b0:100:c3fe:a653 with SMTP id
 q21-20020a056a20a11500b00100c3fea653mr19811602pzk.29.1683897485706;
        Fri, 12 May 2023 06:18:05 -0700 (PDT)
ARC-Seal: i=1; a=rsa-sha256; t=1683897485; cv=none;
        d=google.com; s=arc-20160816;
        b=c7Euv9mRR1cRRiPh3d7j0uWdg/vCZ25Lz4qitSlDrcHDjXASCpkxCSiCA1soWGNfCY
         gSJU4pYEhaVEySJUiNOMrBMvaD0mjOB57Vadu53tiuaOnYgOzMKbHyPwrGI24mB1XEVn
         sQOwHQwuNK5KxK8i+or5b7LD6gus/0M/QvAaL0jhUWjH2F1085ZSCowhYXn/LGyUJAa5
         ujIyc3XrYViOCkOBklyS9TQcxB6TsPUweZfVeJcDeo44HU4H96AEWKqqT6e9+8hroYkM
         fc10VR1WPrcEdT+JpvR0jyH6F2Xb+RzNg59w4aBJSb0OG6simlmQjxOYcnLmnY2hgdFV
         vFMA==
ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com;
 s=arc-20160816;
        h=list-id:precedence:cc:to:in-reply-to:references:message-id
         :content-transfer-encoding:mime-version:subject:date:from
         :dkim-signature;
        bh=mZ4HWLy2uhOnhQ1Gf2nv5BJ+8vgTd2p2II4LszbMfAk=;
        b=JWdxWsZh4JUdZAVjCd5hfMNPJvDAA7d5H1xhxsLD7zJP52JNy631ACLPQUHPTFamWy
         8zY7tMIou9umQr0VDRg3t2o4NSpTldXcq88E3NGvSBVJQllT6LP7qWT1FGq0HymZXdoz
         W0ycqIDr70qvxHpsMq7X2A4gFs3CQY5kJvd97cLWl8vfEI6g8BEPief+7xKEMf00fs95
         9qP0RRo6zxz+GPfNDbZRVwkalzYWroq9do//Zt5LjzYSrvheXgmo1jVBwfDIky+Uv78g
         mZbZvYX9b4lTa3PtaLPIbV93zm7/s7iPvT9he28hPP31loXo1Occvy4YuDrALgvhGjbC
         CaBQ==
ARC-Authentication-Results: i=1; mx.google.com;
       dkim=pass header.i=@linaro.org header.s=google header.b=le9+Ga3O;
       spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org
 designates 2620:137:e000::1:20 as permitted sender)
 smtp.mailfrom=linux-kernel-owner@vger.kernel.org;
       dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org
Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20])
        by mx.google.com with ESMTP id
 a15-20020aa78e8f000000b00643aa8d2548si10151882pfr.120.2023.05.12.06.17.50;
        Fri, 12 May 2023 06:18:05 -0700 (PDT)
Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org
 designates 2620:137:e000::1:20 as permitted sender)
 client-ip=2620:137:e000::1:20;
Authentication-Results: mx.google.com;
       dkim=pass header.i=@linaro.org header.s=google header.b=le9+Ga3O;
       spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org
 designates 2620:137:e000::1:20 as permitted sender)
 smtp.mailfrom=linux-kernel-owner@vger.kernel.org;
       dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
        id S241268AbjELNM7 (ORCPT <rfc822;peekingduck44@gmail.com>
        + 99 others); Fri, 12 May 2023 09:12:59 -0400
Received: from lindbergh.monkeyblade.net ([23.128.96.19]:32772 "EHLO
        lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
        with ESMTP id S241075AbjELNM0 (ORCPT
        <rfc822;linux-kernel@vger.kernel.org>);
        Fri, 12 May 2023 09:12:26 -0400
Received: from mail-wr1-x436.google.com (mail-wr1-x436.google.com
 [IPv6:2a00:1450:4864:20::436])
        by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 43B0F14379
        for <linux-kernel@vger.kernel.org>;
 Fri, 12 May 2023 06:12:05 -0700 (PDT)
Received: by mail-wr1-x436.google.com with SMTP id
 ffacd0b85a97d-3062b101ae1so6502337f8f.2
        for <linux-kernel@vger.kernel.org>;
 Fri, 12 May 2023 06:12:05 -0700 (PDT)
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
        d=linaro.org; s=google; t=1683897123; x=1686489123;
        h=cc:to:in-reply-to:references:message-id:content-transfer-encoding
         :mime-version:subject:date:from:from:to:cc:subject:date:message-id
         :reply-to;
        bh=mZ4HWLy2uhOnhQ1Gf2nv5BJ+8vgTd2p2II4LszbMfAk=;
        b=le9+Ga3OayuDIVZkTMHEm7LpRBC6VzEAVia8Vg6f4vZ1l9bvUAn1irfn/5gZDgh3d1
         JJ+Qv5jC0Hsey6ywDN1Ndi/sv7sUw3oBuUWClWjVByf7lxvtPpsvBpBXDHszkGXZ7T2v
         1lxRhneGO51Y9j1siMp6Tn6vTIxGYyuviiP3zM8gW6VV/HpOOnKxskMyP5eMdqjW2PGo
         JUYBIF+hsaZqTb4X2+Z63Or0vD5Z/JQ9hgRQRemARqsMoUs0pLS4L1eCEf5YGEizVbGw
         W3v3Ak6JweZZr51xlHTcA09xRAckW8LVeKhkC7bP/2h4s3nBvXYDjkdRtKDjg/DN3HWn
         H/2A==
X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
        d=1e100.net; s=20221208; t=1683897123; x=1686489123;
        h=cc:to:in-reply-to:references:message-id:content-transfer-encoding
         :mime-version:subject:date:from:x-gm-message-state:from:to:cc
         :subject:date:message-id:reply-to;
        bh=mZ4HWLy2uhOnhQ1Gf2nv5BJ+8vgTd2p2II4LszbMfAk=;
        b=V5oid0A2FpyAuPE2jbcLj7fKD7gB/hnAM57ZVJ4Ab27i5D36zEZKPykGwmSEelBSS3
         6lMsNhiyaiu73Rr/fxXRxByA1byvj3pEfJItlk6HsyV6sA8LpF5yIGMudYBrETJxrCPv
         ID5UeVSaBurkkE8tGMiCf1ixlW+2za8PkmIKqFm3G+/wpmp8CRILGJpdRxaAbLzgkpiL
         Af/7reWeWDPclYitS0hbqxJBFxASIIjlw0tRqtYoqoLtk4yfBFM79/kRPPKBdt4+lylf
         6Zz9PK6vGYoh0E/5EPVMWL3IEiZg/tvD9spgsOaREhBsMu6A8Q1VHlRg283CHBb0GDOA
         reSg==
X-Gm-Message-State: AC+VfDzYe/40ivhQiZYzLNuBXNml5z6hUYqVwMqFIXlvFWsZLHfIqpfn
        ETZkA/U/l9338p8eG6r7Zm+H8A==
X-Received: by 2002:adf:f1c6:0:b0:2f8:5d92:aa12 with SMTP id
 z6-20020adff1c6000000b002f85d92aa12mr19380448wro.66.1683897123222;
        Fri, 12 May 2023 06:12:03 -0700 (PDT)
Received: from arrakeen.starnux.net ([2a01:e0a:982:cbb0:8261:5fff:fe11:bdda])
        by smtp.gmail.com with ESMTPSA id
 v10-20020a5d610a000000b0030647449730sm23461965wrt.74.2023.05.12.06.12.02
        (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256);
        Fri, 12 May 2023 06:12:02 -0700 (PDT)
From: Neil Armstrong <neil.armstrong@linaro.org>
Date: Fri, 12 May 2023 15:11:40 +0200
Subject: [PATCH v4 09/13] drm/meson: add support for MIPI-DSI transceiver
MIME-Version: 1.0
Message-Id: 
 <20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v4-9-2592c29ea263@linaro.org>
References: 
 <20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v4-0-2592c29ea263@linaro.org>
In-Reply-To: 
 <20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v4-0-2592c29ea263@linaro.org>
To: Jerome Brunet <jbrunet@baylibre.com>,
        Michael Turquette <mturquette@baylibre.com>,
        Stephen Boyd <sboyd@kernel.org>,
        Kevin Hilman <khilman@baylibre.com>,
        Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        David Airlie <airlied@gmail.com>,
        Daniel Vetter <daniel@ffwll.ch>,
        Philipp Zabel <p.zabel@pengutronix.de>,
        Vinod Koul <vkoul@kernel.org>,
        Kishon Vijay Abraham I <kishon@kernel.org>,
        Sam Ravnborg <sam@ravnborg.org>
Cc: Nicolas Belin <nbelin@baylibre.com>,
        linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org,
        linux-phy@lists.infradead.org,
        Neil Armstrong <neil.armstrong@linaro.org>,
        Jagan Teki <jagan@amarulasolutions.com>,
        Neil Armstrong <neil.armstrong@linaro.org>
X-Mailer: b4 0.12.2
X-Developer-Signature: v=1; a=openpgp-sha256; l=19904;
 i=neil.armstrong@linaro.org; h=from:subject:message-id;
 bh=lxzYT0+ovmya50Ojd4/lz3kFWOMSjV0to39H3d8cn40=;
 b=owEBbQKS/ZANAwAKAXfc29rIyEnRAcsmYgBkXjsVXMguF8HMTyF+c6607cX7M+J8A6XP2/z5OSxc
 c/2IP0qJAjMEAAEKAB0WIQQ9U8YmyFYF/h30LIt33NvayMhJ0QUCZF47FQAKCRB33NvayMhJ0RX/D/
 4oRl78hgIcacucy7oUxHn+VNxhfbQ0YmTyfC9V/Otu99nC37WgxG41PlwhoLzuJCxdcbrrlidWiK0r
 52I4UXvkGMaL8sgECLHuMwsvDGz0S8sX1SJjkI+eKpFDbOenX32MWQJqVDc496tjXmJt+o3FjTKFVG
 hyVpqLFuNiNLIEAxn7shYTJVqw/BGs4PhHX8qy+Oc3AUjbpvTyRT5VIBLjXSzfMn005jba2O9kizA7
 JEdYMlTv4WTqfl+YhN/YdB9FAP3f7TfCJ0C8Wb6fLGvbqY2I9d6zxYv4mz1M8peem9wp7plmG4JyMV
 KTJKfdFwboERE5C3p5pwA73YUs+/h5Ztb1Me+6uqcWlKveOl0+385YrzLbVsS0ftDLT2uIn1dgRKcW
 uEV59/70jbfQrugohbwq5ss6WrnMiOYrbwamjpU8KZ7lnaBxAh03OsnvbBfQj9GS0q+/Bde9dbLOtw
 VuwnCN6cHMmJkJ3/tm5ICDVjLGj1MKavLSMxg/dFKHu6bWNZPnxp1TcPYSdvDYrCeYhwecmKGiDzOW
 yW91VCQ822sm3Ay6Gce4nhZSYTtm7VvvU5g5UqgXiyTyoHD+8TCLSz1jW2Ndc1Qr1E6w6RsR8RrCan
 SrUTh8Khkm7ZMxDzAG85O4UJICXV455g1ZN3LyBMdXjuWlvOPNIHvq6wpHkw==
X-Developer-Key: i=neil.armstrong@linaro.org; a=openpgp;
 fpr=89EC3D058446217450F22848169AB7B1A4CFF8AE
X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED,
        DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_NONE,
        SPF_HELO_NONE,SPF_PASS,T_SCC_BODY_TEXT_LINE,URIBL_BLOCKED
        autolearn=unavailable autolearn_force=no version=3.4.6
X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on
        lindbergh.monkeyblade.net
Precedence: bulk
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org
X-getmail-retrieved-from-mailbox: =?utf-8?q?INBOX?=
X-GMAIL-THRID: =?utf-8?q?1765694489945569386?=
X-GMAIL-MSGID: =?utf-8?q?1765694489945569386?=

The Amlogic G12A/G12B/SM1 SoCs embeds a Synopsys DW-MIPI-DSI transceiver (ver 1.21a),
with a custom glue managing the IP resets, clock and data input similar to the DW-HDMI
Glue on other Amlogic SoCs.

This adds support for the Glue managing the transceiver, mimicing the init flow provided
by Amlogic to setup the ENCL encoder, the glue, the transceiver, the digital D-PHY and the
Analog PHY in the proper way.

An optional "MEAS" clock can be enabled to measure the delay between each vsync feeding the
DW-MIPI-DSI transceiver.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 drivers/gpu/drm/meson/Kconfig             |   7 +
 drivers/gpu/drm/meson/Makefile            |   1 +
 drivers/gpu/drm/meson/meson_dw_mipi_dsi.c | 364 ++++++++++++++++++++++++++++++
 drivers/gpu/drm/meson/meson_dw_mipi_dsi.h | 160 +++++++++++++
 4 files changed, 532 insertions(+)

diff --git a/drivers/gpu/drm/meson/Kconfig b/drivers/gpu/drm/meson/Kconfig
index 823909da87db..615fdd0ce41b 100644
--- a/drivers/gpu/drm/meson/Kconfig
+++ b/drivers/gpu/drm/meson/Kconfig
@@ -17,3 +17,10 @@ config DRM_MESON_DW_HDMI
 	default y if DRM_MESON
 	select DRM_DW_HDMI
 	imply DRM_DW_HDMI_I2S_AUDIO
+
+config DRM_MESON_DW_MIPI_DSI
+	tristate "MIPI DSI Synopsys Controller support for Amlogic Meson Display"
+	depends on DRM_MESON
+	default y if DRM_MESON
+	select DRM_DW_MIPI_DSI
+	select GENERIC_PHY_MIPI_DPHY
diff --git a/drivers/gpu/drm/meson/Makefile b/drivers/gpu/drm/meson/Makefile
index 833e18c20603..43071bdbd4b9 100644
--- a/drivers/gpu/drm/meson/Makefile
+++ b/drivers/gpu/drm/meson/Makefile
@@ -6,3 +6,4 @@ meson-drm-y += meson_encoder_hdmi.o meson_encoder_dsi.o
 
 obj-$(CONFIG_DRM_MESON) += meson-drm.o
 obj-$(CONFIG_DRM_MESON_DW_HDMI) += meson_dw_hdmi.o
+obj-$(CONFIG_DRM_MESON_DW_MIPI_DSI) += meson_dw_mipi_dsi.o
diff --git a/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c b/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c
new file mode 100644
index 000000000000..bb5dea8aab36
--- /dev/null
+++ b/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c
@@ -0,0 +1,364 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2021 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (C) 2015 Amlogic, Inc. All rights reserved.
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include <linux/reset.h>
+#include <linux/phy/phy.h>
+#include <linux/bitfield.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/bridge/dw_mipi_dsi.h>
+#include <drm/drm_mipi_dsi.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_device.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_print.h>
+
+#include "meson_drv.h"
+#include "meson_dw_mipi_dsi.h"
+#include "meson_registers.h"
+#include "meson_venc.h"
+
+#define DRIVER_NAME "meson-dw-mipi-dsi"
+#define DRIVER_DESC "Amlogic Meson MIPI-DSI DRM driver"
+
+struct meson_dw_mipi_dsi {
+	struct meson_drm *priv;
+	struct device *dev;
+	void __iomem *base;
+	struct phy *phy;
+	union phy_configure_opts phy_opts;
+	struct dw_mipi_dsi *dmd;
+	struct dw_mipi_dsi_plat_data pdata;
+	struct mipi_dsi_device *dsi_device;
+	const struct drm_display_mode *mode;
+	struct clk *bit_clk;
+	struct clk *px_clk;
+	struct reset_control *top_rst;
+};
+
+#define encoder_to_meson_dw_mipi_dsi(x) \
+	container_of(x, struct meson_dw_mipi_dsi, encoder)
+
+static void meson_dw_mipi_dsi_hw_init(struct meson_dw_mipi_dsi *mipi_dsi)
+{
+	/* Software reset */
+	writel_bits_relaxed(MIPI_DSI_TOP_SW_RESET_DWC | MIPI_DSI_TOP_SW_RESET_INTR |
+			    MIPI_DSI_TOP_SW_RESET_DPI | MIPI_DSI_TOP_SW_RESET_TIMING,
+			    MIPI_DSI_TOP_SW_RESET_DWC | MIPI_DSI_TOP_SW_RESET_INTR |
+			    MIPI_DSI_TOP_SW_RESET_DPI | MIPI_DSI_TOP_SW_RESET_TIMING,
+			    mipi_dsi->base + MIPI_DSI_TOP_SW_RESET);
+	writel_bits_relaxed(MIPI_DSI_TOP_SW_RESET_DWC | MIPI_DSI_TOP_SW_RESET_INTR |
+			    MIPI_DSI_TOP_SW_RESET_DPI | MIPI_DSI_TOP_SW_RESET_TIMING,
+			    0, mipi_dsi->base + MIPI_DSI_TOP_SW_RESET);
+
+	/* Enable clocks */
+	writel_bits_relaxed(MIPI_DSI_TOP_CLK_SYSCLK_EN | MIPI_DSI_TOP_CLK_PIXCLK_EN,
+			    MIPI_DSI_TOP_CLK_SYSCLK_EN | MIPI_DSI_TOP_CLK_PIXCLK_EN,
+			    mipi_dsi->base + MIPI_DSI_TOP_CLK_CNTL);
+
+	/* Take memory out of power down */
+	writel_relaxed(0, mipi_dsi->base + MIPI_DSI_TOP_MEM_PD);
+}
+
+static int dw_mipi_dsi_phy_init(void *priv_data)
+{
+	struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
+	unsigned int dpi_data_format, venc_data_width;
+	int ret;
+
+	/* Set the bit clock rate to hs_clk_rate */
+	ret = clk_set_rate(mipi_dsi->bit_clk,
+			   mipi_dsi->phy_opts.mipi_dphy.hs_clk_rate);
+	if (ret) {
+		dev_err(mipi_dsi->dev, "Failed to set DSI Bit clock rate %lu (ret %d)\n",
+			mipi_dsi->phy_opts.mipi_dphy.hs_clk_rate, ret);
+		return ret;
+	}
+
+	/* Make sure the rate of the bit clock is not modified by someone else */
+	ret = clk_rate_exclusive_get(mipi_dsi->bit_clk);
+	if (ret) {
+		dev_err(mipi_dsi->dev,
+			"Failed to set the exclusivity on the bit clock rate (ret %d)\n", ret);
+		return ret;
+	}
+
+	ret = clk_set_rate(mipi_dsi->px_clk, mipi_dsi->mode->clock * 1000);
+
+	if (ret) {
+		dev_err(mipi_dsi->dev, "Failed to set DSI Pixel clock rate %u (%d)\n",
+			mipi_dsi->mode->clock * 1000, ret);
+		return ret;
+	}
+
+	switch (mipi_dsi->dsi_device->format) {
+	case MIPI_DSI_FMT_RGB888:
+		dpi_data_format = DPI_COLOR_24BIT;
+		venc_data_width = VENC_IN_COLOR_24B;
+		break;
+	case MIPI_DSI_FMT_RGB666:
+		dpi_data_format = DPI_COLOR_18BIT_CFG_2;
+		venc_data_width = VENC_IN_COLOR_18B;
+		break;
+	case MIPI_DSI_FMT_RGB666_PACKED:
+	case MIPI_DSI_FMT_RGB565:
+		return -EINVAL;
+	};
+
+	/* Configure color format for DPI register */
+	writel_relaxed(FIELD_PREP(MIPI_DSI_TOP_DPI_COLOR_MODE, dpi_data_format) |
+		       FIELD_PREP(MIPI_DSI_TOP_IN_COLOR_MODE, venc_data_width) |
+		       FIELD_PREP(MIPI_DSI_TOP_COMP2_SEL, 2) |
+		       FIELD_PREP(MIPI_DSI_TOP_COMP1_SEL, 1) |
+		       FIELD_PREP(MIPI_DSI_TOP_COMP0_SEL, 0) |
+		       (mipi_dsi->mode->flags & DRM_MODE_FLAG_NHSYNC ?
+				0 : MIPI_DSI_TOP_HSYNC_INVERT) |
+		       (mipi_dsi->mode->flags & DRM_MODE_FLAG_NVSYNC ?
+				0 : MIPI_DSI_TOP_VSYNC_INVERT),
+			mipi_dsi->base + MIPI_DSI_TOP_CNTL);
+
+	return phy_configure(mipi_dsi->phy, &mipi_dsi->phy_opts);
+}
+
+static void dw_mipi_dsi_phy_power_on(void *priv_data)
+{
+	struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
+
+	if (phy_power_on(mipi_dsi->phy))
+		dev_warn(mipi_dsi->dev, "Failed to power on PHY\n");
+}
+
+static void dw_mipi_dsi_phy_power_off(void *priv_data)
+{
+	struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
+
+	if (phy_power_off(mipi_dsi->phy))
+		dev_warn(mipi_dsi->dev, "Failed to power off PHY\n");
+
+	/* Remove the exclusivity on the bit clock rate */
+	clk_rate_exclusive_put(mipi_dsi->bit_clk);
+}
+
+static int
+dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
+			  unsigned long mode_flags, u32 lanes, u32 format,
+			  unsigned int *lane_mbps)
+{
+	struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
+	int bpp;
+
+	mipi_dsi->mode = mode;
+
+	bpp = mipi_dsi_pixel_format_to_bpp(mipi_dsi->dsi_device->format);
+
+	phy_mipi_dphy_get_default_config(mode->clock * 1000,
+					 bpp, mipi_dsi->dsi_device->lanes,
+					 &mipi_dsi->phy_opts.mipi_dphy);
+
+	/* Use the rate set as base of hs_clk_rate */
+	mipi_dsi->phy_opts.mipi_dphy.hs_clk_rate = clk_get_rate(mipi_dsi->bit_clk);
+
+	*lane_mbps = DIV_ROUND_UP(mipi_dsi->phy_opts.mipi_dphy.hs_clk_rate, USEC_PER_SEC);
+
+	return 0;
+}
+
+static int
+dw_mipi_dsi_phy_get_timing(void *priv_data, unsigned int lane_mbps,
+			   struct dw_mipi_dsi_dphy_timing *timing)
+{
+	/* TOFIX handle other cases */
+
+	timing->clk_lp2hs = 37;
+	timing->clk_hs2lp = 135;
+	timing->data_lp2hs = 50;
+	timing->data_hs2lp = 3;
+
+	return 0;
+}
+
+static int
+dw_mipi_dsi_get_esc_clk_rate(void *priv_data, unsigned int *esc_clk_rate)
+{
+	*esc_clk_rate = 4; /* Mhz */
+
+	return 0;
+}
+
+static const struct dw_mipi_dsi_phy_ops meson_dw_mipi_dsi_phy_ops = {
+	.init = dw_mipi_dsi_phy_init,
+	.power_on = dw_mipi_dsi_phy_power_on,
+	.power_off = dw_mipi_dsi_phy_power_off,
+	.get_lane_mbps = dw_mipi_dsi_get_lane_mbps,
+	.get_timing = dw_mipi_dsi_phy_get_timing,
+	.get_esc_clk_rate = dw_mipi_dsi_get_esc_clk_rate,
+};
+
+static int meson_dw_mipi_dsi_host_attach(void *priv_data,
+					 struct mipi_dsi_device *device)
+{
+	struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
+	int ret;
+
+	mipi_dsi->dsi_device = device;
+
+	switch (device->format) {
+	case MIPI_DSI_FMT_RGB888:
+		break;
+	case MIPI_DSI_FMT_RGB666:
+		break;
+	case MIPI_DSI_FMT_RGB666_PACKED:
+	case MIPI_DSI_FMT_RGB565:
+		dev_err(mipi_dsi->dev, "invalid pixel format %d\n", device->format);
+		return -EINVAL;
+	};
+
+	ret = phy_init(mipi_dsi->phy);
+	if (ret)
+		return ret;
+
+	meson_dw_mipi_dsi_hw_init(mipi_dsi);
+
+	return 0;
+}
+
+static int meson_dw_mipi_dsi_host_detach(void *priv_data,
+					 struct mipi_dsi_device *device)
+{
+	struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
+
+	if (device == mipi_dsi->dsi_device)
+		mipi_dsi->dsi_device = NULL;
+	else
+		return -EINVAL;
+
+	return phy_exit(mipi_dsi->phy);
+}
+
+static const struct dw_mipi_dsi_host_ops meson_dw_mipi_dsi_host_ops = {
+	.attach = meson_dw_mipi_dsi_host_attach,
+	.detach = meson_dw_mipi_dsi_host_detach,
+};
+
+static int meson_dw_mipi_dsi_bind(struct device *dev, struct device *master,
+				  void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct meson_dw_mipi_dsi *mipi_dsi;
+
+	mipi_dsi = devm_kzalloc(dev, sizeof(*mipi_dsi), GFP_KERNEL);
+	if (!mipi_dsi)
+		return -ENOMEM;
+
+	mipi_dsi->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(mipi_dsi->base))
+		return PTR_ERR(mipi_dsi->base);
+
+	mipi_dsi->phy = devm_phy_get(dev, "dphy");
+	if (IS_ERR(mipi_dsi->phy))
+		return dev_err_probe(dev, PTR_ERR(mipi_dsi->phy),
+				     "failed to get mipi dphy\n");
+
+	mipi_dsi->bit_clk = devm_clk_get_enabled(dev, "bit_clk");
+	if (IS_ERR(mipi_dsi->bit_clk)) {
+		int ret = PTR_ERR(mipi_dsi->bit_clk);
+
+		/* TOFIX GP0 on some platforms fails to lock in early boot, defer probe */
+		if (ret == -EIO)
+			ret = -EPROBE_DEFER;
+
+		return dev_err_probe(dev, ret, "Unable to get enabled bit_clk\n");
+	}
+
+	mipi_dsi->px_clk = devm_clk_get_enabled(dev, "px_clk");
+	if (IS_ERR(mipi_dsi->px_clk))
+		return dev_err_probe(dev, PTR_ERR(mipi_dsi->px_clk),
+				     "Unable to get enabled px_lk\n");
+
+	/*
+	 * We use a TOP reset signal because the APB reset signal
+	 * is handled by the TOP control registers.
+	 */
+	mipi_dsi->top_rst = devm_reset_control_get_exclusive(dev, "top");
+	if (IS_ERR(mipi_dsi->top_rst))
+		return dev_err_probe(dev, PTR_ERR(mipi_dsi->top_rst),
+				     "Unable to get reset control\n");
+
+	reset_control_assert(mipi_dsi->top_rst);
+	usleep_range(10, 20);
+	reset_control_deassert(mipi_dsi->top_rst);
+
+	/* MIPI DSI Controller */
+
+	mipi_dsi->dev = dev;
+	mipi_dsi->pdata.base = mipi_dsi->base;
+	mipi_dsi->pdata.max_data_lanes = 4;
+	mipi_dsi->pdata.phy_ops = &meson_dw_mipi_dsi_phy_ops;
+	mipi_dsi->pdata.host_ops = &meson_dw_mipi_dsi_host_ops;
+	mipi_dsi->pdata.priv_data = mipi_dsi;
+	platform_set_drvdata(pdev, mipi_dsi);
+
+	mipi_dsi->dmd = dw_mipi_dsi_probe(pdev, &mipi_dsi->pdata);
+	if (IS_ERR(mipi_dsi->dmd))
+		return dev_err_probe(dev, PTR_ERR(mipi_dsi->dmd),
+				     "Failed to probe dw_mipi_dsi\n");
+
+	return 0;
+}
+
+static void meson_dw_mipi_dsi_unbind(struct device *dev, struct device *master,
+				     void *data)
+{
+	struct meson_dw_mipi_dsi *mipi_dsi = dev_get_drvdata(dev);
+
+	dw_mipi_dsi_remove(mipi_dsi->dmd);
+}
+
+static const struct component_ops meson_dw_mipi_dsi_ops = {
+	.bind	= meson_dw_mipi_dsi_bind,
+	.unbind	= meson_dw_mipi_dsi_unbind,
+};
+
+static int meson_dw_mipi_dsi_probe(struct platform_device *pdev)
+{
+	return component_add(&pdev->dev, &meson_dw_mipi_dsi_ops);
+}
+
+static int meson_dw_mipi_dsi_remove(struct platform_device *pdev)
+{
+	component_del(&pdev->dev, &meson_dw_mipi_dsi_ops);
+
+	return 0;
+}
+
+static const struct of_device_id meson_dw_mipi_dsi_of_table[] = {
+	{ .compatible = "amlogic,meson-g12a-dw-mipi-dsi", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, meson_dw_mipi_dsi_of_table);
+
+static struct platform_driver meson_dw_mipi_dsi_platform_driver = {
+	.probe		= meson_dw_mipi_dsi_probe,
+	.remove		= meson_dw_mipi_dsi_remove,
+	.driver		= {
+		.name		= DRIVER_NAME,
+		.of_match_table	= meson_dw_mipi_dsi_of_table,
+	},
+};
+module_platform_driver(meson_dw_mipi_dsi_platform_driver);
+
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/meson/meson_dw_mipi_dsi.h b/drivers/gpu/drm/meson/meson_dw_mipi_dsi.h
new file mode 100644
index 000000000000..e1bd6b85d6a3
--- /dev/null
+++ b/drivers/gpu/drm/meson/meson_dw_mipi_dsi.h
@@ -0,0 +1,160 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2020 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (C) 2018 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __MESON_DW_MIPI_DSI_H
+#define __MESON_DW_MIPI_DSI_H
+
+/* Top-level registers */
+/* [31: 4]    Reserved.     Default 0.
+ *     [3] RW timing_rst_n: Default 1.
+ *		1=Assert SW reset of timing feature.   0=Release reset.
+ *     [2] RW dpi_rst_n: Default 1.
+ *		1=Assert SW reset on mipi_dsi_host_dpi block.   0=Release reset.
+ *     [1] RW intr_rst_n: Default 1.
+ *		1=Assert SW reset on mipi_dsi_host_intr block.  0=Release reset.
+ *     [0] RW dwc_rst_n:  Default 1.
+ *		1=Assert SW reset on IP core.   0=Release reset.
+ */
+#define MIPI_DSI_TOP_SW_RESET                      0x3c0
+
+#define MIPI_DSI_TOP_SW_RESET_DWC	BIT(0)
+#define MIPI_DSI_TOP_SW_RESET_INTR	BIT(1)
+#define MIPI_DSI_TOP_SW_RESET_DPI	BIT(2)
+#define MIPI_DSI_TOP_SW_RESET_TIMING	BIT(3)
+
+/* [31: 5] Reserved.   Default 0.
+ *     [4] RW manual_edpihalt: Default 0.
+ *		1=Manual suspend VencL; 0=do not suspend VencL.
+ *     [3] RW auto_edpihalt_en: Default 0.
+ *		1=Enable IP's edpihalt signal to suspend VencL;
+ *		0=IP's edpihalt signal does not affect VencL.
+ *     [2] RW clock_freerun: Apply to auto-clock gate only. Default 0.
+ *		0=Default, use auto-clock gating to save power;
+ *		1=use free-run clock, disable auto-clock gating, for debug mode.
+ *     [1] RW enable_pixclk: A manual clock gate option, due to DWC IP does not
+ *		have auto-clock gating. 1=Enable pixclk.      Default 0.
+ *     [0] RW enable_sysclk: A manual clock gate option, due to DWC IP does not
+ *		have auto-clock gating. 1=Enable sysclk.      Default 0.
+ */
+#define MIPI_DSI_TOP_CLK_CNTL                      0x3c4
+
+#define MIPI_DSI_TOP_CLK_SYSCLK_EN	BIT(0)
+#define MIPI_DSI_TOP_CLK_PIXCLK_EN	BIT(1)
+
+/* [31:24]    Reserved. Default 0.
+ * [23:20] RW dpi_color_mode: Define DPI pixel format. Default 0.
+ *		0=16-bit RGB565 config 1;
+ *		1=16-bit RGB565 config 2;
+ *		2=16-bit RGB565 config 3;
+ *		3=18-bit RGB666 config 1;
+ *		4=18-bit RGB666 config 2;
+ *		5=24-bit RGB888;
+ *		6=20-bit YCbCr 4:2:2;
+ *		7=24-bit YCbCr 4:2:2;
+ *		8=16-bit YCbCr 4:2:2;
+ *		9=30-bit RGB;
+ *		10=36-bit RGB;
+ *		11=12-bit YCbCr 4:2:0.
+ *    [19] Reserved. Default 0.
+ * [18:16] RW in_color_mode:  Define VENC data width. Default 0.
+ *		0=30-bit pixel;
+ *		1=24-bit pixel;
+ *		2=18-bit pixel, RGB666;
+ *		3=16-bit pixel, RGB565.
+ * [15:14] RW chroma_subsample: Define method of chroma subsampling. Default 0.
+ *		Applicable to YUV422 or YUV420 only.
+ *		0=Use even pixel's chroma;
+ *		1=Use odd pixel's chroma;
+ *		2=Use averaged value between even and odd pair.
+ * [13:12] RW comp2_sel:  Select which component to be Cr or B: Default 2.
+ *		0=comp0; 1=comp1; 2=comp2.
+ * [11:10] RW comp1_sel:  Select which component to be Cb or G: Default 1.
+ *		0=comp0; 1=comp1; 2=comp2.
+ *  [9: 8] RW comp0_sel:  Select which component to be Y  or R: Default 0.
+ *		0=comp0; 1=comp1; 2=comp2.
+ *     [7]    Reserved. Default 0.
+ *     [6] RW de_pol:  Default 0.
+ *		If DE input is active low, set to 1 to invert to active high.
+ *     [5] RW hsync_pol: Default 0.
+ *		If HS input is active low, set to 1 to invert to active high.
+ *     [4] RW vsync_pol: Default 0.
+ *		If VS input is active low, set to 1 to invert to active high.
+ *     [3] RW dpicolorm: Signal to IP.   Default 0.
+ *     [2] RW dpishutdn: Signal to IP.   Default 0.
+ *     [1]    Reserved.  Default 0.
+ *     [0]    Reserved.  Default 0.
+ */
+#define MIPI_DSI_TOP_CNTL                          0x3c8
+
+/* VENC data width */
+#define VENC_IN_COLOR_30B   0x0
+#define VENC_IN_COLOR_24B   0x1
+#define VENC_IN_COLOR_18B   0x2
+#define VENC_IN_COLOR_16B   0x3
+
+/* DPI pixel format */
+#define DPI_COLOR_16BIT_CFG_1		0
+#define DPI_COLOR_16BIT_CFG_2		1
+#define DPI_COLOR_16BIT_CFG_3		2
+#define DPI_COLOR_18BIT_CFG_1		3
+#define DPI_COLOR_18BIT_CFG_2		4
+#define DPI_COLOR_24BIT			5
+#define DPI_COLOR_20BIT_YCBCR_422	6
+#define DPI_COLOR_24BIT_YCBCR_422	7
+#define DPI_COLOR_16BIT_YCBCR_422	8
+#define DPI_COLOR_30BIT			9
+#define DPI_COLOR_36BIT			10
+#define DPI_COLOR_12BIT_YCBCR_420	11
+
+#define MIPI_DSI_TOP_DPI_COLOR_MODE	GENMASK(23, 20)
+#define MIPI_DSI_TOP_IN_COLOR_MODE	GENMASK(18, 16)
+#define MIPI_DSI_TOP_CHROMA_SUBSAMPLE	GENMASK(15, 14)
+#define MIPI_DSI_TOP_COMP2_SEL		GENMASK(13, 12)
+#define MIPI_DSI_TOP_COMP1_SEL		GENMASK(11, 10)
+#define MIPI_DSI_TOP_COMP0_SEL		GENMASK(9, 8)
+#define MIPI_DSI_TOP_DE_INVERT		BIT(6)
+#define MIPI_DSI_TOP_HSYNC_INVERT	BIT(5)
+#define MIPI_DSI_TOP_VSYNC_INVERT	BIT(4)
+#define MIPI_DSI_TOP_DPICOLORM		BIT(3)
+#define MIPI_DSI_TOP_DPISHUTDN		BIT(2)
+
+#define MIPI_DSI_TOP_SUSPEND_CNTL                  0x3cc
+#define MIPI_DSI_TOP_SUSPEND_LINE                  0x3d0
+#define MIPI_DSI_TOP_SUSPEND_PIX                   0x3d4
+#define MIPI_DSI_TOP_MEAS_CNTL                     0x3d8
+/* [0] R  stat_edpihalt:  edpihalt signal from IP.    Default 0. */
+#define MIPI_DSI_TOP_STAT                          0x3dc
+#define MIPI_DSI_TOP_MEAS_STAT_TE0                 0x3e0
+#define MIPI_DSI_TOP_MEAS_STAT_TE1                 0x3e4
+#define MIPI_DSI_TOP_MEAS_STAT_VS0                 0x3e8
+#define MIPI_DSI_TOP_MEAS_STAT_VS1                 0x3ec
+/* [31:16] RW intr_stat/clr. Default 0.
+ *		For each bit, read as this interrupt level status,
+ *		write 1 to clear.
+ * [31:22] Reserved
+ * [   21] stat/clr of eof interrupt
+ * [   21] vde_fall interrupt
+ * [   19] stat/clr of de_rise interrupt
+ * [   18] stat/clr of vs_fall interrupt
+ * [   17] stat/clr of vs_rise interrupt
+ * [   16] stat/clr of dwc_edpite interrupt
+ * [15: 0] RW intr_enable. Default 0.
+ *		For each bit, 1=enable this interrupt, 0=disable.
+ *	[15: 6] Reserved
+ *	[    5] eof interrupt
+ *	[    4] de_fall interrupt
+ *	[    3] de_rise interrupt
+ *	[    2] vs_fall interrupt
+ *	[    1] vs_rise interrupt
+ *	[    0] dwc_edpite interrupt
+ */
+#define MIPI_DSI_TOP_INTR_CNTL_STAT                0x3f0
+// 31: 2    Reserved.   Default 0.
+//  1: 0 RW mem_pd.     Default 3.
+#define MIPI_DSI_TOP_MEM_PD                        0x3f4
+
+#endif /* __MESON_DW_MIPI_DSI_H */