Don't assume that only the driver would be accessing LNKCTL. ASPM
policy changes can trigger write to LNKCTL outside of driver's control.
Use pcie_lnkctl_clear_and_set() which does proper locking to avoid
losing concurrent updates to the register value.
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
drivers/net/ethernet/broadcom/tg3.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
@@ -4027,8 +4027,7 @@ static int tg3_power_down_prepare(struct tg3 *tp)
/* Restore the CLKREQ setting. */
if (tg3_flag(tp, CLKREQ_BUG))
- pcie_capability_set_word(tp->pdev, PCI_EXP_LNKCTL,
- PCI_EXP_LNKCTL_CLKREQ_EN);
+ pcie_lnkctl_clear_and_set(tp->pdev, 0, PCI_EXP_LNKCTL_CLKREQ_EN);
misc_host_ctrl = tr32(TG3PCI_MISC_HOST_CTRL);
tw32(TG3PCI_MISC_HOST_CTRL,
@@ -5069,13 +5068,14 @@ static int tg3_setup_copper_phy(struct tg3 *tp, bool force_reset)
/* Prevent send BD corruption. */
if (tg3_flag(tp, CLKREQ_BUG)) {
+ u16 clkreq = 0;
+
if (tp->link_config.active_speed == SPEED_100 ||
tp->link_config.active_speed == SPEED_10)
- pcie_capability_clear_word(tp->pdev, PCI_EXP_LNKCTL,
- PCI_EXP_LNKCTL_CLKREQ_EN);
- else
- pcie_capability_set_word(tp->pdev, PCI_EXP_LNKCTL,
- PCI_EXP_LNKCTL_CLKREQ_EN);
+ clkreq = PCI_EXP_LNKCTL_CLKREQ_EN;
+
+ pcie_lnkctl_clear_and_set(tp->pdev, PCI_EXP_LNKCTL_CLKREQ_EN,
+ clkreq);
}
tg3_test_and_report_link_chg(tp, current_link_up);