[v1,3/7] power: supply: axp20x_usb_power: Use regmap fields for USB BC feature
Commit Message
Replace the use of variant IDs with a regmap field, to reduce
dependence on variant IDs.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
---
drivers/power/supply/axp20x_usb_power.c | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
@@ -41,8 +41,6 @@
#define AXP20X_ADC_EN1_VBUS_CURR BIT(2)
#define AXP20X_ADC_EN1_VBUS_VOLT BIT(3)
-#define AXP813_BC_EN BIT(0)
-
/*
* Note do not raise the debounce time, we must report Vusb high within
* 100ms otherwise we get Vbus errors in musb.
@@ -58,6 +56,7 @@ struct axp_data {
struct reg_field curr_lim_fld;
struct reg_field vbus_valid_bit;
struct reg_field vbus_mon_bit;
+ struct reg_field usb_bc_en_bit;
};
struct axp20x_usb_power {
@@ -65,6 +64,7 @@ struct axp20x_usb_power {
struct regmap_field *curr_lim_fld;
struct regmap_field *vbus_valid_bit;
struct regmap_field *vbus_mon_bit;
+ struct regmap_field *usb_bc_en_bit;
struct power_supply *supply;
enum axp20x_variants axp20x_id;
const struct axp_data *axp_data;
@@ -433,6 +433,7 @@ static const struct axp_data axp813_data = {
.axp20x_id = AXP813_ID,
.curr_lim_table = axp813_usb_curr_lim_table,
.curr_lim_fld = REG_FIELD(AXP20X_VBUS_IPSOUT_MGMT, 0, 1),
+ .usb_bc_en_bit = REG_FIELD(AXP288_BC_GLOBAL, 0, 0),
};
#ifdef CONFIG_PM_SLEEP
@@ -572,6 +573,12 @@ static int axp20x_usb_power_probe(struct platform_device *pdev)
if (ret)
return ret;
+ ret = axp20x_regmap_field_alloc_optional(&pdev->dev, power->regmap,
+ axp_data->usb_bc_en_bit,
+ &power->usb_bc_en_bit);
+ if (ret)
+ return ret;
+
ret = devm_delayed_work_autocancel(&pdev->dev, &power->vbus_detect,
axp20x_usb_power_poll_vbus);
if (ret)
@@ -592,10 +599,9 @@ static int axp20x_usb_power_probe(struct platform_device *pdev)
return ret;
}
- if (power->axp20x_id == AXP813_ID) {
+ if (power->usb_bc_en_bit) {
/* Enable USB Battery Charging specification detection */
- ret = regmap_update_bits(axp20x->regmap, AXP288_BC_GLOBAL,
- AXP813_BC_EN, AXP813_BC_EN);
+ ret = regmap_field_write(power->usb_bc_en_bit, 1);
if (ret)
return ret;
}