[v3,2/2] usb: gadget: udc: Handle gadget_connect failure during bind operation

Message ID 20230510075252.31023-3-quic_kriskura@quicinc.com
State New
Headers
Series Handle core soft reset failure in pullup |

Commit Message

Krishna Kurapati May 10, 2023, 7:52 a.m. UTC
  In the event, gadget_connect call (which invokes pullup) fails,
propagate the error to udc bind operation which inturn sends the
error to configfs. The userspace can then retry enumeartion if
it chooses to.

Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
---
changes in v3: Rebase on top of usb-next

 drivers/usb/gadget/udc/core.c | 21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)
  

Comments

Sergei Shtylyov May 10, 2023, 9:31 a.m. UTC | #1
Hello!

On 5/10/23 10:52 AM, Krishna Kurapati wrote:

> In the event, gadget_connect call (which invokes pullup) fails,
> propagate the error to udc bind operation which inturn sends the
> error to configfs. The userspace can then retry enumeartion if
> it chooses to.
> 
> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
> Acked-by: Alan Stern <stern@rowland.harvard.edu>
> ---
> changes in v3: Rebase on top of usb-next
> 
>  drivers/usb/gadget/udc/core.c | 21 +++++++++++++++++----
>  1 file changed, 17 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
> index 4641153e9706..69041cca5d24 100644
> --- a/drivers/usb/gadget/udc/core.c
> +++ b/drivers/usb/gadget/udc/core.c
> @@ -1122,12 +1122,16 @@ EXPORT_SYMBOL_GPL(usb_gadget_set_state);
>  /* ------------------------------------------------------------------------- */
>  
>  /* Acquire connect_lock before calling this function. */
> -static void usb_udc_connect_control_locked(struct usb_udc *udc) __must_hold(&udc->connect_lock)
> +static int usb_udc_connect_control_locked(struct usb_udc *udc) __must_hold(&udc->connect_lock)
>  {
> +	int ret;
> +
>  	if (udc->vbus && udc->started)
> -		usb_gadget_connect_locked(udc->gadget);
> +		ret = usb_gadget_connect_locked(udc->gadget);

   Why not just:

	return usb_gadget_connect_locked(udc->gadget)

>  	else
> -		usb_gadget_disconnect_locked(udc->gadget);
> +		ret = usb_gadget_disconnect_locked(udc->gadget);

   Likewise here?

> +
> +	return ret;
>  }
>  
>  /**
[...]

MBR, Sergey
  

Patch

diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index 4641153e9706..69041cca5d24 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -1122,12 +1122,16 @@  EXPORT_SYMBOL_GPL(usb_gadget_set_state);
 /* ------------------------------------------------------------------------- */
 
 /* Acquire connect_lock before calling this function. */
-static void usb_udc_connect_control_locked(struct usb_udc *udc) __must_hold(&udc->connect_lock)
+static int usb_udc_connect_control_locked(struct usb_udc *udc) __must_hold(&udc->connect_lock)
 {
+	int ret;
+
 	if (udc->vbus && udc->started)
-		usb_gadget_connect_locked(udc->gadget);
+		ret = usb_gadget_connect_locked(udc->gadget);
 	else
-		usb_gadget_disconnect_locked(udc->gadget);
+		ret = usb_gadget_disconnect_locked(udc->gadget);
+
+	return ret;
 }
 
 /**
@@ -1583,12 +1587,21 @@  static int gadget_bind_driver(struct device *dev)
 		goto err_start;
 	}
 	usb_gadget_enable_async_callbacks(udc);
-	usb_udc_connect_control_locked(udc);
+	ret = usb_udc_connect_control_locked(udc);
+	if (ret)
+		goto err_connect_control;
+
 	mutex_unlock(&udc->connect_lock);
 
 	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
 	return 0;
 
+ err_connect_control:
+	usb_gadget_disable_async_callbacks(udc);
+	if (gadget->irq)
+		synchronize_irq(gadget->irq);
+	usb_gadget_udc_stop_locked(udc);
+
  err_start:
 	driver->unbind(udc->gadget);