diff mbox series

[1/2] dt-bindings: PCI: rcar-pci-host: add optional regulators

Message ID 20230510065819.3987-2-wsa+renesas@sang-engineering.com
State New
Headers
Series KingFisher: support regulators for PCIe |

Commit Message

Wolfram Sang May 10, 2023, 6:58 a.m. UTC 
  Support regulators found on the e.g. KingFisher board for miniPCIe and
add a 12v regulator while we are here.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---

Changes since RFC:
* added 12V supply for completeness
* use PCIe slot in the example instead of miniPCIe because that is what
  the Koelsch board offers (just without the regulators ;))

 .../devicetree/bindings/pci/rcar-pci-host.yaml        | 11 +++++++++++
 1 file changed, 11 insertions(+)

Comments

Geert Uytterhoeven May 10, 2023, 7:22 a.m. UTC | #1 
On Wed, May 10, 2023 at 8:59 AM Wolfram Sang
<wsa+renesas@sang-engineering.com> wrote:
> Support regulators found on the e.g. KingFisher board for miniPCIe and
> add a 12v regulator while we are here.
>
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
>
> Changes since RFC:
> * added 12V supply for completeness
> * use PCIe slot in the example instead of miniPCIe because that is what
>   the Koelsch board offers (just without the regulators ;))

Same for e.g. Salvator-XS.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert
Krzysztof Kozlowski May 10, 2023, 7:56 a.m. UTC | #2 
On 10/05/2023 08:58, Wolfram Sang wrote:
> Support regulators found on the e.g. KingFisher board for miniPCIe and
> add a 12v regulator while we are here.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
> 
> Changes since RFC:
> * added 12V supply for completeness
> * use PCIe slot in the example instead of miniPCIe because that is what
>   the Koelsch board offers (just without the regulators ;))
> 
>  .../devicetree/bindings/pci/rcar-pci-host.yaml        | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml b/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
index 8fdfbc763d70..b6a7cb32f61e 100644
--- a/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
+++ b/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
@@ -68,6 +68,15 @@  properties:
   phy-names:
     const: pcie
 
+  vpcie1v5-supply:
+    description: The 1.5v regulator to use for PCIe.
+
+  vpcie3v3-supply:
+    description: The 3.3v regulator to use for PCIe.
+
+  vpcie12v-supply:
+    description: The 12v regulator to use for PCIe.
+
 required:
   - compatible
   - reg
@@ -121,5 +130,7 @@  examples:
              clock-names = "pcie", "pcie_bus";
              power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
              resets = <&cpg 319>;
+             vpcie3v3-supply = <&pcie_3v3>;
+             vpcie12v-supply = <&pcie_12v>;
          };
     };