Use touch-overlay to support overlay objects such as buttons and resized
frames defined in the device tree.
If an overlay-touchscreen is provided, ignore touch events outside of
the area defined by its properties. Otherwise, transform the event
coordinates to the overlay-touchscreen x and y-axis if required.
If buttons are provided, register an additional device to report key
events separately. A key event will be generated if the coordinates
of a touch event are within the area defined by the button properties.
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
---
drivers/input/touchscreen/st1232.c | 70 ++++++++++++++++++++++++++++++--------
1 file changed, 56 insertions(+), 14 deletions(-)
@@ -22,6 +22,7 @@
#include <linux/pm_qos.h>
#include <linux/slab.h>
#include <linux/types.h>
+#include <linux/input/touch-overlay.h>
#define ST1232_TS_NAME "st1232-ts"
#define ST1633_TS_NAME "st1633-ts"
@@ -56,6 +57,8 @@ struct st1232_ts_data {
struct touchscreen_properties prop;
struct dev_pm_qos_request low_latency_req;
struct gpio_desc *reset_gpio;
+ struct input_dev *overlay_keypad;
+ struct touch_overlay_map *overlay_map;
const struct st_chip_info *chip_info;
int read_buf_len;
u8 *read_buf;
@@ -130,6 +133,7 @@ static int st1232_ts_read_resolution(struct st1232_ts_data *ts, u16 *max_x,
static int st1232_ts_parse_and_report(struct st1232_ts_data *ts)
{
struct input_dev *input = ts->input_dev;
+ struct input_dev *keypad = ts->overlay_keypad;
struct input_mt_pos pos[ST_TS_MAX_FINGERS];
u8 z[ST_TS_MAX_FINGERS];
int slots[ST_TS_MAX_FINGERS];
@@ -138,14 +142,20 @@ static int st1232_ts_parse_and_report(struct st1232_ts_data *ts)
for (i = 0; i < ts->chip_info->max_fingers; i++) {
u8 *buf = &ts->read_buf[i * 4];
+ bool contact = buf[0] & BIT(7);
+ unsigned int x, y;
- if (buf[0] & BIT(7)) {
- unsigned int x = ((buf[0] & 0x70) << 4) | buf[1];
- unsigned int y = ((buf[0] & 0x07) << 8) | buf[2];
-
- touchscreen_set_mt_pos(&pos[n_contacts],
- &ts->prop, x, y);
+ if (contact) {
+ x = ((buf[0] & 0x70) << 4) | buf[1];
+ y = ((buf[0] & 0x07) << 8) | buf[2];
+ }
+ if (touch_overlay_process_event(ts->overlay_map, keypad,
+ contact ? &x : NULL,
+ contact ? &y : NULL, i))
+ continue;
+ if (contact) {
+ touchscreen_set_mt_pos(&pos[n_contacts], &ts->prop, x, y);
/* st1232 includes a z-axis / touch strength */
if (ts->chip_info->have_z)
z[n_contacts] = ts->read_buf[i + 6];
@@ -226,6 +236,7 @@ static int st1232_ts_probe(struct i2c_client *client)
const struct st_chip_info *match;
struct st1232_ts_data *ts;
struct input_dev *input_dev;
+ struct input_dev *overlay_keypad;
u16 max_x, max_y;
int error;
@@ -263,8 +274,13 @@ static int st1232_ts_probe(struct i2c_client *client)
if (!input_dev)
return -ENOMEM;
+ overlay_keypad = devm_input_allocate_device(&client->dev);
+ if (!overlay_keypad)
+ return -ENOMEM;
+
ts->client = client;
ts->input_dev = input_dev;
+ ts->overlay_keypad = overlay_keypad;
ts->reset_gpio = devm_gpiod_get_optional(&client->dev, NULL,
GPIOD_OUT_HIGH);
@@ -286,24 +302,37 @@ static int st1232_ts_probe(struct i2c_client *client)
input_dev->name = "st1232-touchscreen";
input_dev->id.bustype = BUS_I2C;
+ overlay_keypad->name = "st1232-keypad";
+ overlay_keypad->id.bustype = BUS_I2C;
/* Wait until device is ready */
error = st1232_ts_wait_ready(ts);
if (error)
return error;
- /* Read resolution from the chip */
- error = st1232_ts_read_resolution(ts, &max_x, &max_y);
- if (error) {
- dev_err(&client->dev,
- "Failed to read resolution: %d\n", error);
- return error;
- }
-
if (ts->chip_info->have_z)
input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0,
ts->chip_info->max_area, 0, 0);
+ /* map overlay objects if defined in the device tree */
+ ts->overlay_map = touch_overlay_map_overlay(ts->overlay_keypad);
+ if (IS_ERR(ts->overlay_map))
+ return PTR_ERR(ts->overlay_map);
+
+ if (touch_overlay_mapped_touchscreen(ts->overlay_map)) {
+ /* Read resolution from the overlay touchscreen if defined */
+ touch_overlay_get_touchscreen_abs(ts->overlay_map,
+ &max_x, &max_y);
+ } else {
+ /* Read resolution from the chip */
+ error = st1232_ts_read_resolution(ts, &max_x, &max_y);
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to read resolution: %d\n", error);
+ return error;
+ }
+ }
+
input_set_abs_params(input_dev, ABS_MT_POSITION_X,
0, max_x, 0, 0);
input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
@@ -335,6 +364,19 @@ static int st1232_ts_probe(struct i2c_client *client)
return error;
}
+ /* Register keypad input device if overlay buttons were defined */
+ if (touch_overlay_mapped_buttons(ts->overlay_map)) {
+ error = input_register_device(ts->overlay_keypad);
+ if (error) {
+ dev_err(&client->dev,
+ "Unable to register %s input device\n",
+ overlay_keypad->name);
+ return error;
+ }
+ } else {
+ input_free_device(ts->overlay_keypad);
+ }
+
i2c_set_clientdata(client, ts);
return 0;