@@ -1215,6 +1215,7 @@ config TOUCHSCREEN_SIS_I2C
config TOUCHSCREEN_ST1232
tristate "Sitronix ST1232 or ST1633 touchscreen controllers"
depends on I2C
+ select TOUCHSCREEN_TS_VIRTOBJ
help
Say Y here if you want to support the Sitronix ST1232
or ST1633 touchscreen controller.
@@ -22,6 +22,7 @@
#include <linux/pm_qos.h>
#include <linux/slab.h>
#include <linux/types.h>
+#include <linux/input/ts-virtobj.h>
#define ST1232_TS_NAME "st1232-ts"
#define ST1633_TS_NAME "st1633-ts"
@@ -56,6 +57,8 @@ struct st1232_ts_data {
struct touchscreen_properties prop;
struct dev_pm_qos_request low_latency_req;
struct gpio_desc *reset_gpio;
+ struct input_dev *virtual_keypad;
+ struct ts_virtobj_map *map;
const struct st_chip_info *chip_info;
int read_buf_len;
u8 *read_buf;
@@ -129,10 +132,12 @@ static int st1232_ts_read_resolution(struct st1232_ts_data *ts, u16 *max_x,
static int st1232_ts_parse_and_report(struct st1232_ts_data *ts)
{
- struct input_dev *input = ts->input_dev;
+ struct input_dev *tscreen = ts->input_dev;
+ __maybe_unused struct input_dev *keypad = ts->virtual_keypad;
struct input_mt_pos pos[ST_TS_MAX_FINGERS];
u8 z[ST_TS_MAX_FINGERS];
int slots[ST_TS_MAX_FINGERS];
+ __maybe_unused bool button_pressed[ST_TS_MAX_FINGERS];
int n_contacts = 0;
int i;
@@ -143,6 +148,15 @@ static int st1232_ts_parse_and_report(struct st1232_ts_data *ts)
unsigned int x = ((buf[0] & 0x70) << 4) | buf[1];
unsigned int y = ((buf[0] & 0x07) << 8) | buf[2];
+ /* forward button presses to the keypad input device */
+ if (ts_virtobj_is_button_slot(ts->map, i) ||
+ ts_virtobj_button_press(ts->map, keypad, x, y, i)) {
+ button_pressed[i] = true;
+ continue;
+ }
+ /* Ignore events out of the virtual screen if defined */
+ if (!ts_virtobj_mt_on_touchscreen(ts->map, &x, &y))
+ continue;
touchscreen_set_mt_pos(&pos[n_contacts],
&ts->prop, x, y);
@@ -154,18 +168,25 @@ static int st1232_ts_parse_and_report(struct st1232_ts_data *ts)
}
}
- input_mt_assign_slots(input, slots, pos, n_contacts, 0);
+ input_mt_assign_slots(tscreen, slots, pos, n_contacts, 0);
for (i = 0; i < n_contacts; i++) {
- input_mt_slot(input, slots[i]);
- input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
- input_report_abs(input, ABS_MT_POSITION_X, pos[i].x);
- input_report_abs(input, ABS_MT_POSITION_Y, pos[i].y);
+ input_mt_slot(tscreen, slots[i]);
+ input_mt_report_slot_state(tscreen, MT_TOOL_FINGER, true);
+ input_report_abs(tscreen, ABS_MT_POSITION_X, pos[i].x);
+ input_report_abs(tscreen, ABS_MT_POSITION_Y, pos[i].y);
if (ts->chip_info->have_z)
- input_report_abs(input, ABS_MT_TOUCH_MAJOR, z[i]);
+ input_report_abs(tscreen, ABS_MT_TOUCH_MAJOR, z[i]);
+ }
+ input_mt_sync_frame(tscreen);
+ input_sync(tscreen);
+
+ if (ts_virtobj_mapped_buttons(ts->map)) {
+ for (i = 0; i < ts->chip_info->max_fingers; i++)
+ if (ts_virtobj_is_button_slot(ts->map, i) &&
+ !button_pressed[i])
+ ts_virtobj_button_release(ts->map, keypad, i);
+ input_sync(keypad);
}
-
- input_mt_sync_frame(input);
- input_sync(input);
return n_contacts;
}
@@ -226,6 +247,7 @@ static int st1232_ts_probe(struct i2c_client *client)
const struct st_chip_info *match;
struct st1232_ts_data *ts;
struct input_dev *input_dev;
+ struct input_dev __maybe_unused *virtual_keypad;
u16 max_x, max_y;
int error;
@@ -292,18 +314,28 @@ static int st1232_ts_probe(struct i2c_client *client)
if (error)
return error;
- /* Read resolution from the chip */
- error = st1232_ts_read_resolution(ts, &max_x, &max_y);
- if (error) {
- dev_err(&client->dev,
- "Failed to read resolution: %d\n", error);
- return error;
- }
-
if (ts->chip_info->have_z)
input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0,
ts->chip_info->max_area, 0, 0);
+ /* map virtual objects if defined in the device tree */
+ ts->map = ts_virtobj_map_objects(&ts->client->dev, ts->input_dev);
+ if (IS_ERR(ts->map))
+ return PTR_ERR(ts->map);
+
+ if (ts_virtobj_mapped_touchscreen(ts->map)) {
+ /* Read resolution from the virtual touchscreen if defined*/
+ ts_virtobj_get_touchscreen_abs(ts->map, &max_x, &max_y);
+ } else {
+ /* Read resolution from the chip */
+ error = st1232_ts_read_resolution(ts, &max_x, &max_y);
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to read resolution: %d\n", error);
+ return error;
+ }
+ }
+
input_set_abs_params(input_dev, ABS_MT_POSITION_X,
0, max_x, 0, 0);
input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
@@ -335,6 +367,25 @@ static int st1232_ts_probe(struct i2c_client *client)
return error;
}
+ /* Register keypad input device if virtual buttons were defined */
+ if (ts_virtobj_mapped_buttons(ts->map)) {
+ virtual_keypad = devm_input_allocate_device(&client->dev);
+ if (!virtual_keypad)
+ return -ENOMEM;
+
+ ts->virtual_keypad = virtual_keypad;
+ virtual_keypad->name = "st1232-keypad";
+ virtual_keypad->id.bustype = BUS_I2C;
+ ts_virtobj_set_button_caps(ts->map, virtual_keypad);
+ error = input_register_device(ts->virtual_keypad);
+ if (error) {
+ dev_err(&client->dev,
+ "Unable to register %s input device\n",
+ virtual_keypad->name);
+ return error;
+ }
+ }
+
i2c_set_clientdata(client, ts);
return 0;