Divisor latch read/write functions currently handle the value is int.
As the value is related to HW context, u32 makes much more sense than a
signed type.
While at it, name the parameters in the callback signature.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
drivers/tty/serial/8250/8250.h | 4 ++--
drivers/tty/serial/8250/8250_em.c | 4 ++--
drivers/tty/serial/8250/8250_port.c | 10 +++++-----
drivers/tty/serial/8250/8250_pxa.c | 2 +-
drivers/tty/serial/8250/8250_uniphier.c | 4 ++--
include/linux/serial_8250.h | 4 ++--
6 files changed, 14 insertions(+), 14 deletions(-)
On 09. 05. 23, 13:39, Ilpo Järvinen wrote:
> Divisor latch read/write functions currently handle the value is int.
*as* int?
> As the value is related to HW context, u32 makes much more sense than a
> signed type.
>
> While at it, name the parameters in the callback signature.
...
> --- a/drivers/tty/serial/8250/8250_port.c
> +++ b/drivers/tty/serial/8250/8250_port.c
...
> @@ -847,7 +847,7 @@ static void disable_rsa(struct uart_8250_port *up)
> static int size_fifo(struct uart_8250_port *up)
> {
> unsigned char old_fcr, old_mcr, old_lcr;
> - unsigned short old_dl;
> + unsigned int old_dl;
I am missing the context, but why not u32 here?
thanks,
@@ -167,12 +167,12 @@ static unsigned int __maybe_unused serial_icr_read(struct uart_8250_port *up,
void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p);
-static inline int serial_dl_read(struct uart_8250_port *up)
+static inline u32 serial_dl_read(struct uart_8250_port *up)
{
return up->dl_read(up);
}
-static inline void serial_dl_write(struct uart_8250_port *up, int value)
+static inline void serial_dl_write(struct uart_8250_port *up, u32 value)
{
up->dl_write(up, value);
}
@@ -139,12 +139,12 @@ static void serial8250_em_serial_out(struct uart_port *p, int offset, int value)
}
}
-static int serial8250_em_serial_dl_read(struct uart_8250_port *up)
+static u32 serial8250_em_serial_dl_read(struct uart_8250_port *up)
{
return serial_in(up, UART_DLL_EM) | serial_in(up, UART_DLM_EM) << 8;
}
-static void serial8250_em_serial_dl_write(struct uart_8250_port *up, int value)
+static void serial8250_em_serial_dl_write(struct uart_8250_port *up, u32 value)
{
serial_out(up, UART_DLL_EM, value & 0xff);
serial_out(up, UART_DLM_EM, value >> 8 & 0xff);
@@ -325,7 +325,7 @@ static const struct serial8250_config uart_config[] = {
};
/* Uart divisor latch read */
-static int default_serial_dl_read(struct uart_8250_port *up)
+static u32 default_serial_dl_read(struct uart_8250_port *up)
{
/* Assign these in pieces to truncate any bits above 7. */
unsigned char dll = serial_in(up, UART_DLL);
@@ -335,7 +335,7 @@ static int default_serial_dl_read(struct uart_8250_port *up)
}
/* Uart divisor latch write */
-static void default_serial_dl_write(struct uart_8250_port *up, int value)
+static void default_serial_dl_write(struct uart_8250_port *up, u32 value)
{
serial_out(up, UART_DLL, value & 0xff);
serial_out(up, UART_DLM, value >> 8 & 0xff);
@@ -389,12 +389,12 @@ void au_serial_out(struct uart_port *p, int offset, int value)
}
/* Au1x00 haven't got a standard divisor latch */
-static int au_serial_dl_read(struct uart_8250_port *up)
+static u32 au_serial_dl_read(struct uart_8250_port *up)
{
return __raw_readl(up->port.membase + 0x28);
}
-static void au_serial_dl_write(struct uart_8250_port *up, int value)
+static void au_serial_dl_write(struct uart_8250_port *up, u32 value)
{
__raw_writel(value, up->port.membase + 0x28);
}
@@ -847,7 +847,7 @@ static void disable_rsa(struct uart_8250_port *up)
static int size_fifo(struct uart_8250_port *up)
{
unsigned char old_fcr, old_mcr, old_lcr;
- unsigned short old_dl;
+ unsigned int old_dl;
int count;
old_lcr = serial_in(up, UART_LCR);
@@ -60,7 +60,7 @@ static const struct of_device_id serial_pxa_dt_ids[] = {
MODULE_DEVICE_TABLE(of, serial_pxa_dt_ids);
/* Uart divisor latch write */
-static void serial_pxa_dl_write(struct uart_8250_port *up, int value)
+static void serial_pxa_dl_write(struct uart_8250_port *up, u32 value)
{
unsigned int dll;
@@ -145,12 +145,12 @@ static void uniphier_serial_out(struct uart_port *p, int offset, int value)
* The divisor latch register exists at different address.
* Override dl_read/write callbacks.
*/
-static int uniphier_serial_dl_read(struct uart_8250_port *up)
+static u32 uniphier_serial_dl_read(struct uart_8250_port *up)
{
return readl(up->port.membase + UNIPHIER_UART_DLR);
}
-static void uniphier_serial_dl_write(struct uart_8250_port *up, int value)
+static void uniphier_serial_dl_write(struct uart_8250_port *up, u32 value)
{
writel(value, up->port.membase + UNIPHIER_UART_DLR);
}
@@ -129,8 +129,8 @@ struct uart_8250_port {
const struct uart_8250_ops *ops;
/* 8250 specific callbacks */
- int (*dl_read)(struct uart_8250_port *);
- void (*dl_write)(struct uart_8250_port *, int);
+ u32 (*dl_read)(struct uart_8250_port *up);
+ void (*dl_write)(struct uart_8250_port *up, u32 value);
struct uart_8250_em485 *em485;
void (*rs485_start_tx)(struct uart_8250_port *);