[v2,2/5] dt-bindings: clocks: atmel,at91rm9200-pmc: convert to yaml
Commit Message
Convert Atmel PMC documentation to yaml.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
.../devicetree/bindings/clock/at91-clock.txt | 28 ----
.../bindings/clock/atmel,at91rm9200-pmc.yaml | 154 ++++++++++++++++++
2 files changed, 154 insertions(+), 28 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml
Comments
On Mon, 08 May 2023 13:47:58 +0300, Claudiu Beznea wrote:
> Convert Atmel PMC documentation to yaml.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
> .../devicetree/bindings/clock/at91-clock.txt | 28 ----
> .../bindings/clock/atmel,at91rm9200-pmc.yaml | 154 ++++++++++++++++++
> 2 files changed, 154 insertions(+), 28 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.example.dtb: camera-sensor@3c: port:endpoint:data-lanes: [[1]] is too short
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/rockchip-isp1.example.dtb: camera@3c: port:endpoint:data-lanes: [[1]] is too short
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.example.dtb: pcie-ep@33800000: Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected)
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
doc reference errors (make refcheckdocs):
Documentation/usb/gadget_uvc.rst: Documentation/userspace-api/media/v4l/pixfmt-packed.yuv.rst
MAINTAINERS: Documentation/devicetree/bindings/pwm/pwm-apple.yaml
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230508104801.445261-3-claudiu.beznea@microchip.com
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
On 08/05/2023 13:27, Rob Herring wrote:
>
> On Mon, 08 May 2023 13:47:58 +0300, Claudiu Beznea wrote:
>> Convert Atmel PMC documentation to yaml.
>>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
>> ---
>> .../devicetree/bindings/clock/at91-clock.txt | 28 ----
>> .../bindings/clock/atmel,at91rm9200-pmc.yaml | 154 ++++++++++++++++++
>> 2 files changed, 154 insertions(+), 28 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml
>>
>
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.example.dtb: camera-sensor@3c: port:endpoint:data-lanes: [[1]] is too short
> From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/rockchip-isp1.example.dtb: camera@3c: port:endpoint:data-lanes: [[1]] is too short
> From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.example.dtb: pcie-ep@33800000: Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected)
> From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
These can be ignored.
Best regards,
Krzysztof
On 08/05/2023 12:47, Claudiu Beznea wrote:
> Convert Atmel PMC documentation to yaml.
Please mention the changes against original binding. At least
clock-names look different, maybe more.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
> .../devicetree/bindings/clock/at91-clock.txt | 28 ----
> .../bindings/clock/atmel,at91rm9200-pmc.yaml | 154 ++++++++++++++++++
> 2 files changed, 154 insertions(+), 28 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml
>
> diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
> index 13f45db3b66d..57394785d3b0 100644
> --- a/Documentation/devicetree/bindings/clock/at91-clock.txt
> +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt
> @@ -28,31 +28,3 @@ For example:
> #clock-cells = <0>;
> };
>
> -Power Management Controller (PMC):
> -
> -Required properties:
> -- compatible : shall be "atmel,<chip>-pmc", "syscon" or
> - "microchip,sam9x60-pmc"
> - <chip> can be: at91rm9200, at91sam9260, at91sam9261,
> - at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9g15,
> - at91sam9g25, at91sam9g35, at91sam9x25, at91sam9x35, at91sam9x5,
> - sama5d2, sama5d3 or sama5d4.
> -- #clock-cells : from common clock binding; shall be set to 2. The first entry
> - is the type of the clock (core, system, peripheral or generated) and the
> - second entry its index as provided by the datasheet
> -- clocks : Must contain an entry for each entry in clock-names.
> -- clock-names: Must include the following entries: "slow_clk", "main_xtal"
> -
> -Optional properties:
> -- atmel,osc-bypass : boolean property. Set this when a clock signal is directly
> - provided on XIN.
> -
> -For example:
> - pmc: pmc@f0018000 {
> - compatible = "atmel,sama5d4-pmc", "syscon";
> - reg = <0xf0018000 0x120>;
> - interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
> - #clock-cells = <2>;
> - clocks = <&clk32k>, <&main_xtal>;
> - clock-names = "slow_clk", "main_xtal";
> - };
> diff --git a/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml b/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml
> new file mode 100644
> index 000000000000..58b702520600
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml
> @@ -0,0 +1,154 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/atmel,at91rm9200-pmc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Atmel Power Management Controller (PMC)
> +
> +maintainers:
> + - Claudiu Beznea <claudiu.beznea@microchip.com>
> +
> +description:
> + The power management controller optimizes power consumption by controlling all
> + system and user peripheral clocks. The PMC enables/disables the clock inputs
> + to many of the peripherals and to the processor.
> +
> +properties:
> + compatible:
> + oneOf:
> + - items:
> + - const: atmel,at91sam9260-pmc
> + - const: syscon
No improvements here. Why this is part of this group not the one at the
end? I already talked about this.
> + - items:
> + - enum:
> + - atmel,at91sam9g15-pmc
> + - atmel,at91sam9g20-pmc
> + - atmel,at91sam9g25-pmc
> + - atmel,at91sam9g35-pmc
> + - atmel,at91sam9x25-pmc
> + - atmel,at91sam9x35-pmc
> + - enum:
> + - atmel,at91sam9260-pmc
> + - atmel,at91sam9x5-pmc
> + - const: syscon
> + - items:
> + - enum:
> + - atmel,at91rm9200-pmc
> + - atmel,at91sam9g45-pmc
> + - atmel,at91sam9n12-pmc
> + - atmel,at91sam9rl-pmc
> + - atmel,sama5d2-pmc
> + - atmel,sama5d3-pmc
> + - atmel,sama5d4-pmc
> + - microchip,sam9x60-pmc
> + - microchip,sama7g5-pmc
> + - const: syscon
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + "#clock-cells":
> + description: |
> + - 1st cell is the clock type, one of PMC_TYPE_CORE, PMC_TYPE_SYSTEM,
> + PMC_TYPE_PERIPHERAL, PMC_TYPE_GCK, PMC_TYPE_PROGRAMMABLE (as defined
> + in <dt-bindings/clock/at91.h>)
> + - 2nd cell is the clock identifier as defined in <dt-bindings/clock/at91.h
> + (for core clocks) or as defined in datasheet (for system, peripheral,
> + gck and programmable clocks).
> + const: 2
> +
> + clocks:
> + minItems: 2
> + maxItems: 3
> +
> + clock-names:
> + minItems: 2
> + maxItems: 3
> +
> + atmel,osc-bypass:
> + description: set when a clock signal is directly provided on XIN
> + type: boolean
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - "#clock-cells"
> + - clocks
> + - clock-names
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - microchip,sam9x60-pmc
> + - microchip,sama7g5-pmc
> + then:
> + properties:
> + clocks:
> + minItems: 3
> + maxItems: 3
> + clock-names:
> + items:
> + - const: td_slck
> + - const: md_slck
> + - const: main_xtal
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - atmel,at91rm9200-pmc
> + - atmel,at91sam9260-pmc
> + - atmel,at91sam9g20-pmc
> + then:
> + properties:
> + clocks:
> + minItems: 2
> + maxItems: 2
> + clock-names:
> + items:
> + - const: slow_xtal
> + - const: main_xtal
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - atmel,sama5d4-pmc
> + - atmel,sama5d3-pmc
> + - atmel,sama5d2-pmc
Keep similar order as in compatibles list, e.g. alphanumeric.
Best regards,
Krzysztof
On 08.05.2023 19:26, Krzysztof Kozlowski wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> On 08/05/2023 12:47, Claudiu Beznea wrote:
>> Convert Atmel PMC documentation to yaml.
>
> Please mention the changes against original binding. At least
> clock-names look different, maybe more.
>
>>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
>> ---
>> .../devicetree/bindings/clock/at91-clock.txt | 28 ----
>> .../bindings/clock/atmel,at91rm9200-pmc.yaml | 154 ++++++++++++++++++
>> 2 files changed, 154 insertions(+), 28 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
>> index 13f45db3b66d..57394785d3b0 100644
>> --- a/Documentation/devicetree/bindings/clock/at91-clock.txt
>> +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt
>> @@ -28,31 +28,3 @@ For example:
>> #clock-cells = <0>;
>> };
>>
>> -Power Management Controller (PMC):
>> -
>> -Required properties:
>> -- compatible : shall be "atmel,<chip>-pmc", "syscon" or
>> - "microchip,sam9x60-pmc"
>> - <chip> can be: at91rm9200, at91sam9260, at91sam9261,
>> - at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9g15,
>> - at91sam9g25, at91sam9g35, at91sam9x25, at91sam9x35, at91sam9x5,
>> - sama5d2, sama5d3 or sama5d4.
>> -- #clock-cells : from common clock binding; shall be set to 2. The first entry
>> - is the type of the clock (core, system, peripheral or generated) and the
>> - second entry its index as provided by the datasheet
>> -- clocks : Must contain an entry for each entry in clock-names.
>> -- clock-names: Must include the following entries: "slow_clk", "main_xtal"
>> -
>> -Optional properties:
>> -- atmel,osc-bypass : boolean property. Set this when a clock signal is directly
>> - provided on XIN.
>> -
>> -For example:
>> - pmc: pmc@f0018000 {
>> - compatible = "atmel,sama5d4-pmc", "syscon";
>> - reg = <0xf0018000 0x120>;
>> - interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
>> - #clock-cells = <2>;
>> - clocks = <&clk32k>, <&main_xtal>;
>> - clock-names = "slow_clk", "main_xtal";
>> - };
>> diff --git a/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml b/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml
>> new file mode 100644
>> index 000000000000..58b702520600
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml
>> @@ -0,0 +1,154 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/clock/atmel,at91rm9200-pmc.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Atmel Power Management Controller (PMC)
>> +
>> +maintainers:
>> + - Claudiu Beznea <claudiu.beznea@microchip.com>
>> +
>> +description:
>> + The power management controller optimizes power consumption by controlling all
>> + system and user peripheral clocks. The PMC enables/disables the clock inputs
>> + to many of the peripherals and to the processor.
>> +
>> +properties:
>> + compatible:
>> + oneOf:
>> + - items:
>> + - const: atmel,at91sam9260-pmc
>> + - const: syscon
>
> No improvements here. Why this is part of this group not the one at the
> end? I already talked about this.
I missed it. It will be handled it in the next version.
>
>> + - items:
>> + - enum:
>> + - atmel,at91sam9g15-pmc
>> + - atmel,at91sam9g20-pmc
>> + - atmel,at91sam9g25-pmc
>> + - atmel,at91sam9g35-pmc
>> + - atmel,at91sam9x25-pmc
>> + - atmel,at91sam9x35-pmc
>> + - enum:
>> + - atmel,at91sam9260-pmc
>> + - atmel,at91sam9x5-pmc
>> + - const: syscon
>> + - items:
>> + - enum:
>> + - atmel,at91rm9200-pmc
>> + - atmel,at91sam9g45-pmc
>> + - atmel,at91sam9n12-pmc
>> + - atmel,at91sam9rl-pmc
>> + - atmel,sama5d2-pmc
>> + - atmel,sama5d3-pmc
>> + - atmel,sama5d4-pmc
>> + - microchip,sam9x60-pmc
>> + - microchip,sama7g5-pmc
>> + - const: syscon
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + interrupts:
>> + maxItems: 1
>> +
>> + "#clock-cells":
>> + description: |
>> + - 1st cell is the clock type, one of PMC_TYPE_CORE, PMC_TYPE_SYSTEM,
>> + PMC_TYPE_PERIPHERAL, PMC_TYPE_GCK, PMC_TYPE_PROGRAMMABLE (as defined
>> + in <dt-bindings/clock/at91.h>)
>> + - 2nd cell is the clock identifier as defined in <dt-bindings/clock/at91.h
>> + (for core clocks) or as defined in datasheet (for system, peripheral,
>> + gck and programmable clocks).
>> + const: 2
>> +
>> + clocks:
>> + minItems: 2
>> + maxItems: 3
>> +
>> + clock-names:
>> + minItems: 2
>> + maxItems: 3
>> +
>> + atmel,osc-bypass:
>> + description: set when a clock signal is directly provided on XIN
>> + type: boolean
>> +
>> +required:
>> + - compatible
>> + - reg
>> + - interrupts
>> + - "#clock-cells"
>> + - clocks
>> + - clock-names
>> +
>> +allOf:
>> + - if:
>> + properties:
>> + compatible:
>> + contains:
>> + enum:
>> + - microchip,sam9x60-pmc
>> + - microchip,sama7g5-pmc
>> + then:
>> + properties:
>> + clocks:
>> + minItems: 3
>> + maxItems: 3
>> + clock-names:
>> + items:
>> + - const: td_slck
>> + - const: md_slck
>> + - const: main_xtal
>> +
>> + - if:
>> + properties:
>> + compatible:
>> + contains:
>> + enum:
>> + - atmel,at91rm9200-pmc
>> + - atmel,at91sam9260-pmc
>> + - atmel,at91sam9g20-pmc
>> + then:
>> + properties:
>> + clocks:
>> + minItems: 2
>> + maxItems: 2
>> + clock-names:
>> + items:
>> + - const: slow_xtal
>> + - const: main_xtal
>> +
>> + - if:
>> + properties:
>> + compatible:
>> + contains:
>> + enum:
>> + - atmel,sama5d4-pmc
>> + - atmel,sama5d3-pmc
>> + - atmel,sama5d2-pmc
>
> Keep similar order as in compatibles list, e.g. alphanumeric.
>
> Best regards,
> Krzysztof
>
@@ -28,31 +28,3 @@ For example:
#clock-cells = <0>;
};
-Power Management Controller (PMC):
-
-Required properties:
-- compatible : shall be "atmel,<chip>-pmc", "syscon" or
- "microchip,sam9x60-pmc"
- <chip> can be: at91rm9200, at91sam9260, at91sam9261,
- at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9g15,
- at91sam9g25, at91sam9g35, at91sam9x25, at91sam9x35, at91sam9x5,
- sama5d2, sama5d3 or sama5d4.
-- #clock-cells : from common clock binding; shall be set to 2. The first entry
- is the type of the clock (core, system, peripheral or generated) and the
- second entry its index as provided by the datasheet
-- clocks : Must contain an entry for each entry in clock-names.
-- clock-names: Must include the following entries: "slow_clk", "main_xtal"
-
-Optional properties:
-- atmel,osc-bypass : boolean property. Set this when a clock signal is directly
- provided on XIN.
-
-For example:
- pmc: pmc@f0018000 {
- compatible = "atmel,sama5d4-pmc", "syscon";
- reg = <0xf0018000 0x120>;
- interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
- #clock-cells = <2>;
- clocks = <&clk32k>, <&main_xtal>;
- clock-names = "slow_clk", "main_xtal";
- };
new file mode 100644
@@ -0,0 +1,154 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/atmel,at91rm9200-pmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Power Management Controller (PMC)
+
+maintainers:
+ - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description:
+ The power management controller optimizes power consumption by controlling all
+ system and user peripheral clocks. The PMC enables/disables the clock inputs
+ to many of the peripherals and to the processor.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: atmel,at91sam9260-pmc
+ - const: syscon
+ - items:
+ - enum:
+ - atmel,at91sam9g15-pmc
+ - atmel,at91sam9g20-pmc
+ - atmel,at91sam9g25-pmc
+ - atmel,at91sam9g35-pmc
+ - atmel,at91sam9x25-pmc
+ - atmel,at91sam9x35-pmc
+ - enum:
+ - atmel,at91sam9260-pmc
+ - atmel,at91sam9x5-pmc
+ - const: syscon
+ - items:
+ - enum:
+ - atmel,at91rm9200-pmc
+ - atmel,at91sam9g45-pmc
+ - atmel,at91sam9n12-pmc
+ - atmel,at91sam9rl-pmc
+ - atmel,sama5d2-pmc
+ - atmel,sama5d3-pmc
+ - atmel,sama5d4-pmc
+ - microchip,sam9x60-pmc
+ - microchip,sama7g5-pmc
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ "#clock-cells":
+ description: |
+ - 1st cell is the clock type, one of PMC_TYPE_CORE, PMC_TYPE_SYSTEM,
+ PMC_TYPE_PERIPHERAL, PMC_TYPE_GCK, PMC_TYPE_PROGRAMMABLE (as defined
+ in <dt-bindings/clock/at91.h>)
+ - 2nd cell is the clock identifier as defined in <dt-bindings/clock/at91.h
+ (for core clocks) or as defined in datasheet (for system, peripheral,
+ gck and programmable clocks).
+ const: 2
+
+ clocks:
+ minItems: 2
+ maxItems: 3
+
+ clock-names:
+ minItems: 2
+ maxItems: 3
+
+ atmel,osc-bypass:
+ description: set when a clock signal is directly provided on XIN
+ type: boolean
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#clock-cells"
+ - clocks
+ - clock-names
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - microchip,sam9x60-pmc
+ - microchip,sama7g5-pmc
+ then:
+ properties:
+ clocks:
+ minItems: 3
+ maxItems: 3
+ clock-names:
+ items:
+ - const: td_slck
+ - const: md_slck
+ - const: main_xtal
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - atmel,at91rm9200-pmc
+ - atmel,at91sam9260-pmc
+ - atmel,at91sam9g20-pmc
+ then:
+ properties:
+ clocks:
+ minItems: 2
+ maxItems: 2
+ clock-names:
+ items:
+ - const: slow_xtal
+ - const: main_xtal
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - atmel,sama5d4-pmc
+ - atmel,sama5d3-pmc
+ - atmel,sama5d2-pmc
+ then:
+ properties:
+ clocks:
+ minItems: 2
+ maxItems: 2
+ clock-names:
+ items:
+ - const: slow_clk
+ - const: main_xtal
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ pmc: clock-controller@f0018000 {
+ compatible = "atmel,sama5d4-pmc", "syscon";
+ reg = <0xf0018000 0x120>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ #clock-cells = <2>;
+ clocks = <&clk32k>, <&main_xtal>;
+ clock-names = "slow_clk", "main_xtal";
+ };
+
+...