[v10,04/10] dt-bindings: reset: nuvoton: Document ma35d1 reset control
Commit Message
From: Jacky Huang <ychuang3@nuvoton.com>
Add the dt-bindings header for Nuvoton ma35d1, that gets shared
between the reset controller and reset references in the dts.
Add documentation to describe nuvoton ma35d1 reset driver.
Signed-off-by: Jacky Huang <ychuang3@nuvoton.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../bindings/reset/nuvoton,ma35d1-reset.yaml | 45 ++++++++
.../dt-bindings/reset/nuvoton,ma35d1-reset.h | 108 ++++++++++++++++++
2 files changed, 153 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml
create mode 100644 include/dt-bindings/reset/nuvoton,ma35d1-reset.h
Comments
On Mon, 08 May 2023 02:59:30 +0000, Jacky Huang wrote:
> From: Jacky Huang <ychuang3@nuvoton.com>
>
> Add the dt-bindings header for Nuvoton ma35d1, that gets shared
> between the reset controller and reset references in the dts.
> Add documentation to describe nuvoton ma35d1 reset driver.
>
> Signed-off-by: Jacky Huang <ychuang3@nuvoton.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> .../bindings/reset/nuvoton,ma35d1-reset.yaml | 45 ++++++++
> .../dt-bindings/reset/nuvoton,ma35d1-reset.h | 108 ++++++++++++++++++
> 2 files changed, 153 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml
> create mode 100644 include/dt-bindings/reset/nuvoton,ma35d1-reset.h
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.example.dtb: camera-sensor@3c: port:endpoint:data-lanes: [[1]] is too short
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/rockchip-isp1.example.dtb: camera@3c: port:endpoint:data-lanes: [[1]] is too short
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.example.dtb: pcie-ep@33800000: Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected)
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
doc reference errors (make refcheckdocs):
Documentation/usb/gadget_uvc.rst: Documentation/userspace-api/media/v4l/pixfmt-packed.yuv.rst
MAINTAINERS: Documentation/devicetree/bindings/pwm/pwm-apple.yaml
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230508025936.36776-5-ychuang570808@gmail.com
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
new file mode 100644
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/nuvoton,ma35d1-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton MA35D1 Reset Controller
+
+maintainers:
+ - Chi-Fang Li <cfli0@nuvoton.com>
+ - Jacky Huang <ychuang3@nuvoton.com>
+
+description:
+ The system reset controller can be used to reset various peripheral
+ controllers in MA35D1 SoC.
+
+properties:
+ compatible:
+ items:
+ - const: nuvoton,ma35d1-reset
+
+ reg:
+ maxItems: 1
+
+ '#reset-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+ # system reset controller node:
+ - |
+
+ system-management@40460000 {
+ compatible = "nuvoton,ma35d1-reset";
+ reg = <0x40460000 0x200>;
+ #reset-cells = <1>;
+ };
+...
+
new file mode 100644
@@ -0,0 +1,108 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2023 Nuvoton Technologies.
+ * Author: Chi-Fen Li <cfli0@nuvoton.com>
+ *
+ * Device Tree binding constants for MA35D1 reset controller.
+ */
+
+#ifndef __DT_BINDINGS_RESET_MA35D1_H
+#define __DT_BINDINGS_RESET_MA35D1_H
+
+#define MA35D1_RESET_CHIP 0
+#define MA35D1_RESET_CA35CR0 1
+#define MA35D1_RESET_CA35CR1 2
+#define MA35D1_RESET_CM4 3
+#define MA35D1_RESET_PDMA0 4
+#define MA35D1_RESET_PDMA1 5
+#define MA35D1_RESET_PDMA2 6
+#define MA35D1_RESET_PDMA3 7
+#define MA35D1_RESET_DISP 8
+#define MA35D1_RESET_VCAP0 9
+#define MA35D1_RESET_VCAP1 10
+#define MA35D1_RESET_GFX 11
+#define MA35D1_RESET_VDEC 12
+#define MA35D1_RESET_WHC0 13
+#define MA35D1_RESET_WHC1 14
+#define MA35D1_RESET_GMAC0 15
+#define MA35D1_RESET_GMAC1 16
+#define MA35D1_RESET_HWSEM 17
+#define MA35D1_RESET_EBI 18
+#define MA35D1_RESET_HSUSBH0 19
+#define MA35D1_RESET_HSUSBH1 20
+#define MA35D1_RESET_HSUSBD 21
+#define MA35D1_RESET_USBHL 22
+#define MA35D1_RESET_SDH0 23
+#define MA35D1_RESET_SDH1 24
+#define MA35D1_RESET_NAND 25
+#define MA35D1_RESET_GPIO 26
+#define MA35D1_RESET_MCTLP 27
+#define MA35D1_RESET_MCTLC 28
+#define MA35D1_RESET_DDRPUB 29
+#define MA35D1_RESET_TMR0 30
+#define MA35D1_RESET_TMR1 31
+#define MA35D1_RESET_TMR2 32
+#define MA35D1_RESET_TMR3 33
+#define MA35D1_RESET_I2C0 34
+#define MA35D1_RESET_I2C1 35
+#define MA35D1_RESET_I2C2 36
+#define MA35D1_RESET_I2C3 37
+#define MA35D1_RESET_QSPI0 38
+#define MA35D1_RESET_SPI0 39
+#define MA35D1_RESET_SPI1 40
+#define MA35D1_RESET_SPI2 41
+#define MA35D1_RESET_UART0 42
+#define MA35D1_RESET_UART1 43
+#define MA35D1_RESET_UART2 44
+#define MA35D1_RESET_UART3 45
+#define MA35D1_RESET_UART4 46
+#define MA35D1_RESET_UART5 47
+#define MA35D1_RESET_UART6 48
+#define MA35D1_RESET_UART7 49
+#define MA35D1_RESET_CANFD0 50
+#define MA35D1_RESET_CANFD1 51
+#define MA35D1_RESET_EADC0 52
+#define MA35D1_RESET_I2S0 53
+#define MA35D1_RESET_SC0 54
+#define MA35D1_RESET_SC1 55
+#define MA35D1_RESET_QSPI1 56
+#define MA35D1_RESET_SPI3 57
+#define MA35D1_RESET_EPWM0 58
+#define MA35D1_RESET_EPWM1 59
+#define MA35D1_RESET_QEI0 60
+#define MA35D1_RESET_QEI1 61
+#define MA35D1_RESET_ECAP0 62
+#define MA35D1_RESET_ECAP1 63
+#define MA35D1_RESET_CANFD2 64
+#define MA35D1_RESET_ADC0 65
+#define MA35D1_RESET_TMR4 66
+#define MA35D1_RESET_TMR5 67
+#define MA35D1_RESET_TMR6 68
+#define MA35D1_RESET_TMR7 69
+#define MA35D1_RESET_TMR8 70
+#define MA35D1_RESET_TMR9 71
+#define MA35D1_RESET_TMR10 72
+#define MA35D1_RESET_TMR11 73
+#define MA35D1_RESET_UART8 74
+#define MA35D1_RESET_UART9 75
+#define MA35D1_RESET_UART10 76
+#define MA35D1_RESET_UART11 77
+#define MA35D1_RESET_UART12 78
+#define MA35D1_RESET_UART13 79
+#define MA35D1_RESET_UART14 80
+#define MA35D1_RESET_UART15 81
+#define MA35D1_RESET_UART16 82
+#define MA35D1_RESET_I2S1 83
+#define MA35D1_RESET_I2C4 84
+#define MA35D1_RESET_I2C5 85
+#define MA35D1_RESET_EPWM2 86
+#define MA35D1_RESET_ECAP2 87
+#define MA35D1_RESET_QEI2 88
+#define MA35D1_RESET_CANFD3 89
+#define MA35D1_RESET_KPI 90
+#define MA35D1_RESET_GIC 91
+#define MA35D1_RESET_SSMCC 92
+#define MA35D1_RESET_SSPCC 93
+#define MA35D1_RESET_COUNT 94
+
+#endif