diff mbox series

arm64: dts: imx93: add wdog3 node

Message ID 20230505093130.1834861-1-peng.fan@oss.nxp.com
State New
Headers
Series arm64: dts: imx93: add wdog3 node |

Commit Message

Peng Fan (OSS) May 5, 2023, 9:31 a.m. UTC 
  From: Peng Fan <peng.fan@nxp.com>

Add wdog3 node, then watchdog could be used.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx93.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Alexander Stein May 8, 2023, 6:34 a.m. UTC | #1 
Hello,

thanks for the patch.

Am Freitag, 5. Mai 2023, 11:31:30 CEST schrieb Peng Fan (OSS):
> From: Peng Fan <peng.fan@nxp.com>
> 
> Add wdog3 node, then watchdog could be used.
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx93.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi
> b/arch/arm64/boot/dts/freescale/imx93.dtsi index e8d49660ac85..73ecd953ec8d
> 100644
> --- a/arch/arm64/boot/dts/freescale/imx93.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
> @@ -344,6 +344,14 @@ mu2: mailbox@42440000 {
>  				status = "disabled";
>  			};
> 
> +			wdog3: wdog@42490000 {

I think this should be called 'watchdog@42490000'

> +				compatible = "fsl,imx93-wdt";
> +				reg = <0x42490000 0x10000>;
> +				interrupts = <GIC_SPI 79 
IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&clk IMX93_CLK_WDOG3_GATE>;
> +				timeout-sec = <40>;

Should it be disabled it by default?

> +			};
> +
>  			tpm3: pwm@424e0000 {
>  				compatible = "fsl,imx7ulp-pwm";
>  				reg = <0x424e0000 0x1000>;

Is there a reason you just add watchdog3? There are 5 in total.

Best regards,
Alexander
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index e8d49660ac85..73ecd953ec8d 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -344,6 +344,14 @@  mu2: mailbox@42440000 {
 				status = "disabled";
 			};
 
+			wdog3: wdog@42490000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x42490000 0x10000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_WDOG3_GATE>;
+				timeout-sec = <40>;
+			};
+
 			tpm3: pwm@424e0000 {
 				compatible = "fsl,imx7ulp-pwm";
 				reg = <0x424e0000 0x1000>;