diff mbox series

cpupower: Make TSC read per CPU for Mperf monitor

Message ID 20230504062544.601566-1-wyes.karny@amd.com
State New
Headers
Series cpupower: Make TSC read per CPU for Mperf monitor |

Commit Message

Wyes Karny May 4, 2023, 6:25 a.m. UTC 
  System-wide TSC read could cause a drift in C0 percentage calculation.
Because if first TSC is read and then one by one mperf is read for all
cpus, this introduces drift between mperf reading of later CPUs and TSC
reading.  To lower this drift read TSC per CPU and also just after mperf
read.  This technique improves C0 percentage calculation in Mperf monitor.

Before fix: (System 100% busy)

              | Mperf              || RAPL        || Idle_Stats
 PKG|CORE| CPU| C0   | Cx   | Freq  || pack | core  || POLL | C1   | C2
   0|   0|   0| 87.15| 12.85|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   0| 256| 84.62| 15.38|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   1|   1| 87.15| 12.85|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   1| 257| 84.08| 15.92|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   2|   2| 86.61| 13.39|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   2| 258| 83.26| 16.74|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   3|   3| 86.61| 13.39|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   3| 259| 83.60| 16.40|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   4|   4| 86.33| 13.67|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   4| 260| 83.33| 16.67|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   5|   5| 86.06| 13.94|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   5| 261| 83.05| 16.95|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   6|   6| 85.51| 14.49|  2695||168659003|3970468||  0.00|  0.00| 0.00

After fix: (System 100% busy)

             | Mperf              || RAPL        || Idle_Stats
 PKG|CORE| CPU| C0   | Cx   | Freq  || pack | core  || POLL | C1   | C2
   0|   0|   0| 98.03|  1.97|  2415||163295480|3811189||  0.00|  0.00| 0.00
   0|   0| 256| 98.50|  1.50|  2394||163295480|3811189||  0.00|  0.00| 0.00
   0|   1|   1| 99.99|  0.01|  2401||163295480|3811189||  0.00|  0.00| 0.00
   0|   1| 257| 99.99|  0.01|  2375||163295480|3811189||  0.00|  0.00| 0.00
   0|   2|   2| 99.99|  0.01|  2401||163295480|3811189||  0.00|  0.00| 0.00
   0|   2| 258|100.00|  0.00|  2401||163295480|3811189||  0.00|  0.00| 0.00
   0|   3|   3|100.00|  0.00|  2401||163295480|3811189||  0.00|  0.00| 0.00
   0|   3| 259| 99.99|  0.01|  2435||163295480|3811189||  0.00|  0.00| 0.00
   0|   4|   4|100.00|  0.00|  2401||163295480|3811189||  0.00|  0.00| 0.00
   0|   4| 260|100.00|  0.00|  2435||163295480|3811189||  0.00|  0.00| 0.00
   0|   5|   5| 99.99|  0.01|  2401||163295480|3811189||  0.00|  0.00| 0.00
   0|   5| 261|100.00|  0.00|  2435||163295480|3811189||  0.00|  0.00| 0.00
   0|   6|   6|100.00|  0.00|  2401||163295480|3811189||  0.00|  0.00| 0.00
   0|   6| 262|100.00|  0.00|  2435||163295480|3811189||  0.00|  0.00| 0.00

Cc: Thomas Renninger <trenn@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>

Fixes: 7fe2f6399a84 ("cpupowerutils - cpufrequtils extended with quite some features")
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
---
 .../utils/idle_monitor/mperf_monitor.c        | 31 +++++++++----------
 1 file changed, 14 insertions(+), 17 deletions(-)

Comments

Thomas Renninger May 4, 2023, 6:47 a.m. UTC | #1 
On Donnerstag, 4. Mai 2023 08:25:44 CEST Wyes Karny wrote:
> This technique improves C0 percentage calculation in Mperf monitor.

I very much like this patch.
Would be nice to see it queued up if Shuah is ok with it.

Thanks for this one!

     Thomas
Shuah Khan May 4, 2023, 4:09 p.m. UTC | #2 
On 5/4/23 00:47, Thomas Renninger wrote:
> On Donnerstag, 4. Mai 2023 08:25:44 CEST Wyes Karny wrote:
>> This technique improves C0 percentage calculation in Mperf monitor.
> 

Like it. Thanks for finding and fixing it.

> I very much like this patch.
> Would be nice to see it queued up if Shuah is ok with it.
> 
> Thanks for this one!
> 
>       Thomas
> 
> 

Thank Thomas for the review. I will queue this up to send after
the merge window closes.

thanks,
-- Shuah
Wyes Karny May 4, 2023, 7:42 p.m. UTC | #3 
On 04 May 10:09, Shuah Khan wrote:
> On 5/4/23 00:47, Thomas Renninger wrote:
> > On Donnerstag, 4. Mai 2023 08:25:44 CEST Wyes Karny wrote:
> > > This technique improves C0 percentage calculation in Mperf monitor.
> > 
> 
> Like it. Thanks for finding and fixing it.
> 
> > I very much like this patch.
> > Would be nice to see it queued up if Shuah is ok with it.
> > 
> > Thanks for this one!
> > 
> >       Thomas
> > 
> > 
> 
> Thank Thomas for the review. I will queue this up to send after
> the merge window closes.

Thanks Thomas, Shuah for reviewing and accepting the patch.

Regards,
Wyes
> 
> thanks,
> -- Shuah
>
diff mbox series

Patch

diff --git a/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c b/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c
index e7d48cb563c0..ae6af354a81d 100644
--- a/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c
+++ b/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c
@@ -70,8 +70,8 @@  static int max_freq_mode;
  */
 static unsigned long max_frequency;
 
-static unsigned long long tsc_at_measure_start;
-static unsigned long long tsc_at_measure_end;
+static unsigned long long *tsc_at_measure_start;
+static unsigned long long *tsc_at_measure_end;
 static unsigned long long *mperf_previous_count;
 static unsigned long long *aperf_previous_count;
 static unsigned long long *mperf_current_count;
@@ -169,7 +169,7 @@  static int mperf_get_count_percent(unsigned int id, double *percent,
 	aperf_diff = aperf_current_count[cpu] - aperf_previous_count[cpu];
 
 	if (max_freq_mode == MAX_FREQ_TSC_REF) {
-		tsc_diff = tsc_at_measure_end - tsc_at_measure_start;
+		tsc_diff = tsc_at_measure_end[cpu] - tsc_at_measure_start[cpu];
 		*percent = 100.0 * mperf_diff / tsc_diff;
 		dprint("%s: TSC Ref - mperf_diff: %llu, tsc_diff: %llu\n",
 		       mperf_cstates[id].name, mperf_diff, tsc_diff);
@@ -206,7 +206,7 @@  static int mperf_get_count_freq(unsigned int id, unsigned long long *count,
 
 	if (max_freq_mode == MAX_FREQ_TSC_REF) {
 		/* Calculate max_freq from TSC count */
-		tsc_diff = tsc_at_measure_end - tsc_at_measure_start;
+		tsc_diff = tsc_at_measure_end[cpu] - tsc_at_measure_start[cpu];
 		time_diff = timespec_diff_us(time_start, time_end);
 		max_frequency = tsc_diff / time_diff;
 	}
@@ -225,33 +225,27 @@  static int mperf_get_count_freq(unsigned int id, unsigned long long *count,
 static int mperf_start(void)
 {
 	int cpu;
-	unsigned long long dbg;
 
 	clock_gettime(CLOCK_REALTIME, &time_start);
-	mperf_get_tsc(&tsc_at_measure_start);
 
-	for (cpu = 0; cpu < cpu_count; cpu++)
+	for (cpu = 0; cpu < cpu_count; cpu++) {
+		mperf_get_tsc(&tsc_at_measure_start[cpu]);
 		mperf_init_stats(cpu);
+	}
 
-	mperf_get_tsc(&dbg);
-	dprint("TSC diff: %llu\n", dbg - tsc_at_measure_start);
 	return 0;
 }
 
 static int mperf_stop(void)
 {
-	unsigned long long dbg;
 	int cpu;
 
-	for (cpu = 0; cpu < cpu_count; cpu++)
+	for (cpu = 0; cpu < cpu_count; cpu++) {
 		mperf_measure_stats(cpu);
+		mperf_get_tsc(&tsc_at_measure_end[cpu]);
+	}
 
-	mperf_get_tsc(&tsc_at_measure_end);
 	clock_gettime(CLOCK_REALTIME, &time_end);
-
-	mperf_get_tsc(&dbg);
-	dprint("TSC diff: %llu\n", dbg - tsc_at_measure_end);
-
 	return 0;
 }
 
@@ -353,7 +347,8 @@  struct cpuidle_monitor *mperf_register(void)
 	aperf_previous_count = calloc(cpu_count, sizeof(unsigned long long));
 	mperf_current_count = calloc(cpu_count, sizeof(unsigned long long));
 	aperf_current_count = calloc(cpu_count, sizeof(unsigned long long));
-
+	tsc_at_measure_start = calloc(cpu_count, sizeof(unsigned long long));
+	tsc_at_measure_end = calloc(cpu_count, sizeof(unsigned long long));
 	mperf_monitor.name_len = strlen(mperf_monitor.name);
 	return &mperf_monitor;
 }
@@ -364,6 +359,8 @@  void mperf_unregister(void)
 	free(aperf_previous_count);
 	free(mperf_current_count);
 	free(aperf_current_count);
+	free(tsc_at_measure_start);
+	free(tsc_at_measure_end);
 	free(is_valid);
 }