[v2,2/2] usb: dwc3: gadget: Improve dwc3_gadget_suspend() and dwc3_gadget_resume()
Commit Message
Prevent -ETIMEDOUT error on .suspend().
e.g. If gadget driver is loaded and we are connected to a USB host,
all transfers must be stopped before stopping the controller else
we will not get a clean stop i.e. dwc3_gadget_run_stop() will take
several seconds to complete and will return -ETIMEDOUT.
Handle error cases properly in dwc3_gadget_suspend().
Simplify dwc3_gadget_resume() by using the introduced helper function.
Fixes: 9f8a67b65a49 ("usb: dwc3: gadget: fix gadget suspend/resume")
Cc: stable@vger.kernel.org
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Roger Quadros <rogerq@kernel.org>
---
drivers/usb/dwc3/gadget.c | 66 +++++++++++++++++++--------------------
1 file changed, 33 insertions(+), 33 deletions(-)
Comments
On Tue, May 02, 2023, Roger Quadros wrote:
> Prevent -ETIMEDOUT error on .suspend().
> e.g. If gadget driver is loaded and we are connected to a USB host,
> all transfers must be stopped before stopping the controller else
> we will not get a clean stop i.e. dwc3_gadget_run_stop() will take
> several seconds to complete and will return -ETIMEDOUT.
>
> Handle error cases properly in dwc3_gadget_suspend().
> Simplify dwc3_gadget_resume() by using the introduced helper function.
>
> Fixes: 9f8a67b65a49 ("usb: dwc3: gadget: fix gadget suspend/resume")
> Cc: stable@vger.kernel.org
> Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
> Signed-off-by: Roger Quadros <rogerq@kernel.org>
> ---
> drivers/usb/dwc3/gadget.c | 66 +++++++++++++++++++--------------------
> 1 file changed, 33 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index b5170374cd18..869f1695565d 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -2699,6 +2699,21 @@ static int dwc3_gadget_soft_disconnect(struct dwc3 *dwc)
> return ret;
> }
>
> +static int dwc3_gadget_soft_connect(struct dwc3 *dwc)
> +{
> + /*
> + * In the Synopsys DWC_usb31 1.90a programming guide section
> + * 4.1.9, it specifies that for a reconnect after a
> + * device-initiated disconnect requires a core soft reset
> + * (DCTL.CSftRst) before enabling the run/stop bit.
> + */
> + dwc3_core_soft_reset(dwc);
> +
> + dwc3_event_buffers_setup(dwc);
> + __dwc3_gadget_start(dwc);
> + return dwc3_gadget_run_stop(dwc, true);
> +}
> +
> static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
> {
> struct dwc3 *dwc = gadget_to_dwc(g);
> @@ -2737,21 +2752,10 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
>
> synchronize_irq(dwc->irq_gadget);
>
> - if (!is_on) {
> + if (!is_on)
> ret = dwc3_gadget_soft_disconnect(dwc);
> - } else {
> - /*
> - * In the Synopsys DWC_usb31 1.90a programming guide section
> - * 4.1.9, it specifies that for a reconnect after a
> - * device-initiated disconnect requires a core soft reset
> - * (DCTL.CSftRst) before enabling the run/stop bit.
> - */
> - dwc3_core_soft_reset(dwc);
> -
> - dwc3_event_buffers_setup(dwc);
> - __dwc3_gadget_start(dwc);
> - ret = dwc3_gadget_run_stop(dwc, true);
> - }
> + else
> + ret = dwc3_gadget_soft_connect(dwc);
>
> pm_runtime_put(dwc->dev);
>
> @@ -4655,42 +4659,38 @@ void dwc3_gadget_exit(struct dwc3 *dwc)
> int dwc3_gadget_suspend(struct dwc3 *dwc)
> {
> unsigned long flags;
> + int ret;
>
> if (!dwc->gadget_driver || !dwc->softconnect)
> return 0;
>
> - dwc3_gadget_run_stop(dwc, false);
> + ret = dwc3_gadget_soft_disconnect(dwc);
> + if (ret)
> + goto err;
>
> spin_lock_irqsave(&dwc->lock, flags);
> dwc3_disconnect_gadget(dwc);
> - __dwc3_gadget_stop(dwc);
> spin_unlock_irqrestore(&dwc->lock, flags);
>
> return 0;
> +
> +err:
> + /*
> + * Attempt to reset the controller's state. Likely no
> + * communication can be established until the host
> + * performs a port reset.
> + */
> + dwc3_gadget_soft_connect(dwc);
> +
> + return ret;
> }
>
> int dwc3_gadget_resume(struct dwc3 *dwc)
> {
> - int ret;
> -
> if (!dwc->gadget_driver || !dwc->softconnect)
> return 0;
>
> - ret = __dwc3_gadget_start(dwc);
> - if (ret < 0)
> - goto err0;
> -
> - ret = dwc3_gadget_run_stop(dwc, true);
> - if (ret < 0)
> - goto err1;
> -
> - return 0;
> -
> -err1:
> - __dwc3_gadget_stop(dwc);
> -
> -err0:
> - return ret;
> + return dwc3_gadget_soft_connect(dwc);
> }
>
> void dwc3_gadget_process_pending_events(struct dwc3 *dwc)
> --
> 2.34.1
>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Thanks,
Thinh
On 03/05/2023 00:18, Thinh Nguyen wrote:
> On Tue, May 02, 2023, Roger Quadros wrote:
>> Prevent -ETIMEDOUT error on .suspend().
>> e.g. If gadget driver is loaded and we are connected to a USB host,
>> all transfers must be stopped before stopping the controller else
>> we will not get a clean stop i.e. dwc3_gadget_run_stop() will take
>> several seconds to complete and will return -ETIMEDOUT.
>>
>> Handle error cases properly in dwc3_gadget_suspend().
>> Simplify dwc3_gadget_resume() by using the introduced helper function.
>>
>> Fixes: 9f8a67b65a49 ("usb: dwc3: gadget: fix gadget suspend/resume")
>> Cc: stable@vger.kernel.org
>> Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
>> Signed-off-by: Roger Quadros <rogerq@kernel.org>
>> ---
>> drivers/usb/dwc3/gadget.c | 66 +++++++++++++++++++--------------------
>> 1 file changed, 33 insertions(+), 33 deletions(-)
>>
>> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
>> index b5170374cd18..869f1695565d 100644
>> --- a/drivers/usb/dwc3/gadget.c
>> +++ b/drivers/usb/dwc3/gadget.c
>> @@ -2699,6 +2699,21 @@ static int dwc3_gadget_soft_disconnect(struct dwc3 *dwc)
>> return ret;
>> }
>>
>> +static int dwc3_gadget_soft_connect(struct dwc3 *dwc)
>> +{
>> + /*
>> + * In the Synopsys DWC_usb31 1.90a programming guide section
>> + * 4.1.9, it specifies that for a reconnect after a
>> + * device-initiated disconnect requires a core soft reset
>> + * (DCTL.CSftRst) before enabling the run/stop bit.
>> + */
>> + dwc3_core_soft_reset(dwc);
>> +
>> + dwc3_event_buffers_setup(dwc);
>> + __dwc3_gadget_start(dwc);
>> + return dwc3_gadget_run_stop(dwc, true);
>> +}
>> +
>> static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
>> {
>> struct dwc3 *dwc = gadget_to_dwc(g);
>> @@ -2737,21 +2752,10 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
>>
>> synchronize_irq(dwc->irq_gadget);
>>
>> - if (!is_on) {
>> + if (!is_on)
>> ret = dwc3_gadget_soft_disconnect(dwc);
>> - } else {
>> - /*
>> - * In the Synopsys DWC_usb31 1.90a programming guide section
>> - * 4.1.9, it specifies that for a reconnect after a
>> - * device-initiated disconnect requires a core soft reset
>> - * (DCTL.CSftRst) before enabling the run/stop bit.
>> - */
>> - dwc3_core_soft_reset(dwc);
>> -
>> - dwc3_event_buffers_setup(dwc);
>> - __dwc3_gadget_start(dwc);
>> - ret = dwc3_gadget_run_stop(dwc, true);
>> - }
>> + else
>> + ret = dwc3_gadget_soft_connect(dwc);
>>
>> pm_runtime_put(dwc->dev);
>>
>> @@ -4655,42 +4659,38 @@ void dwc3_gadget_exit(struct dwc3 *dwc)
>> int dwc3_gadget_suspend(struct dwc3 *dwc)
>> {
>> unsigned long flags;
>> + int ret;
>>
>> if (!dwc->gadget_driver || !dwc->softconnect)
>> return 0;
>>
>> - dwc3_gadget_run_stop(dwc, false);
>> + ret = dwc3_gadget_soft_disconnect(dwc);
>> + if (ret)
>> + goto err;
>>
>> spin_lock_irqsave(&dwc->lock, flags);
>> dwc3_disconnect_gadget(dwc);
>> - __dwc3_gadget_stop(dwc);
>> spin_unlock_irqrestore(&dwc->lock, flags);
>>
>> return 0;
>> +
>> +err:
As we don't pick the first patch, we will need to check for dwc->softconnect
here.
I'll send a follow up patch.
>> + /*
>> + * Attempt to reset the controller's state. Likely no
>> + * communication can be established until the host
>> + * performs a port reset.
>> + */
>> + dwc3_gadget_soft_connect(dwc);
>> +
>> + return ret;
>> }
>>
>> int dwc3_gadget_resume(struct dwc3 *dwc)
>> {
>> - int ret;
>> -
>> if (!dwc->gadget_driver || !dwc->softconnect)
>> return 0;
>>
>> - ret = __dwc3_gadget_start(dwc);
>> - if (ret < 0)
>> - goto err0;
>> -
>> - ret = dwc3_gadget_run_stop(dwc, true);
>> - if (ret < 0)
>> - goto err1;
>> -
>> - return 0;
>> -
>> -err1:
>> - __dwc3_gadget_stop(dwc);
>> -
>> -err0:
>> - return ret;
>> + return dwc3_gadget_soft_connect(dwc);
>> }
>>
>> void dwc3_gadget_process_pending_events(struct dwc3 *dwc)
>> --
>> 2.34.1
>>
>
> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
>
> Thanks,
> Thinh
cheers,
-roger
@@ -2699,6 +2699,21 @@ static int dwc3_gadget_soft_disconnect(struct dwc3 *dwc)
return ret;
}
+static int dwc3_gadget_soft_connect(struct dwc3 *dwc)
+{
+ /*
+ * In the Synopsys DWC_usb31 1.90a programming guide section
+ * 4.1.9, it specifies that for a reconnect after a
+ * device-initiated disconnect requires a core soft reset
+ * (DCTL.CSftRst) before enabling the run/stop bit.
+ */
+ dwc3_core_soft_reset(dwc);
+
+ dwc3_event_buffers_setup(dwc);
+ __dwc3_gadget_start(dwc);
+ return dwc3_gadget_run_stop(dwc, true);
+}
+
static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
{
struct dwc3 *dwc = gadget_to_dwc(g);
@@ -2737,21 +2752,10 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
synchronize_irq(dwc->irq_gadget);
- if (!is_on) {
+ if (!is_on)
ret = dwc3_gadget_soft_disconnect(dwc);
- } else {
- /*
- * In the Synopsys DWC_usb31 1.90a programming guide section
- * 4.1.9, it specifies that for a reconnect after a
- * device-initiated disconnect requires a core soft reset
- * (DCTL.CSftRst) before enabling the run/stop bit.
- */
- dwc3_core_soft_reset(dwc);
-
- dwc3_event_buffers_setup(dwc);
- __dwc3_gadget_start(dwc);
- ret = dwc3_gadget_run_stop(dwc, true);
- }
+ else
+ ret = dwc3_gadget_soft_connect(dwc);
pm_runtime_put(dwc->dev);
@@ -4655,42 +4659,38 @@ void dwc3_gadget_exit(struct dwc3 *dwc)
int dwc3_gadget_suspend(struct dwc3 *dwc)
{
unsigned long flags;
+ int ret;
if (!dwc->gadget_driver || !dwc->softconnect)
return 0;
- dwc3_gadget_run_stop(dwc, false);
+ ret = dwc3_gadget_soft_disconnect(dwc);
+ if (ret)
+ goto err;
spin_lock_irqsave(&dwc->lock, flags);
dwc3_disconnect_gadget(dwc);
- __dwc3_gadget_stop(dwc);
spin_unlock_irqrestore(&dwc->lock, flags);
return 0;
+
+err:
+ /*
+ * Attempt to reset the controller's state. Likely no
+ * communication can be established until the host
+ * performs a port reset.
+ */
+ dwc3_gadget_soft_connect(dwc);
+
+ return ret;
}
int dwc3_gadget_resume(struct dwc3 *dwc)
{
- int ret;
-
if (!dwc->gadget_driver || !dwc->softconnect)
return 0;
- ret = __dwc3_gadget_start(dwc);
- if (ret < 0)
- goto err0;
-
- ret = dwc3_gadget_run_stop(dwc, true);
- if (ret < 0)
- goto err1;
-
- return 0;
-
-err1:
- __dwc3_gadget_stop(dwc);
-
-err0:
- return ret;
+ return dwc3_gadget_soft_connect(dwc);
}
void dwc3_gadget_process_pending_events(struct dwc3 *dwc)