diff mbox series

[v2,1/2] arm64: dts: qcom: sc7280: Fix EUD dt node syntax

Message ID 20230502093959.1258889-2-bhupesh.sharma@linaro.org
State New
Headers
Series Qualcomm EUD: Some cleanups |

Commit Message

Bhupesh Sharma May 2, 2023, 9:39 a.m. UTC 
  As noted by Konrad while reviewing [1], fix the EUD and DWC3
node syntax in sc7280 dtsi file.

While at it also fix the errors reported by '$ make dtbs_check'
for the EUD node:

 arch/arm64/boot/dts/qcom/sc7280-crd-r3.dtb: eud@88e0000: ports:
    'oneOf' conditional failed, one must be fixed:
	'port' is a required property
	'#address-cells' is a required property
	'#size-cells' is a required property
  From schema: Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml

[1]. https://lore.kernel.org/linux-arm-msm/20221231131945.3286639-1-bhupesh.sharma@linaro.org

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 36 ++++++++++++++--------------
 1 file changed, 18 insertions(+), 18 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 31728f461422..e441b1d6cad3 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -640,6 +640,18 @@  cpu7_opp_3014mhz: opp-3014400000 {
 		};
 	};
 
+	eud_typec: connector {
+		compatible = "usb-c-connector";
+
+		ports {
+			port@0 {
+				con_eud: endpoint {
+					remote-endpoint = <&eud_con>;
+				};
+			};
+		};
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the size */
@@ -3421,6 +3433,7 @@  usb_2_dwc3: usb@8c00000 {
 				phy-names = "usb2-phy";
 				maximum-speed = "high-speed";
 				usb-role-switch;
+
 				port {
 					usb2_role_switch: endpoint {
 						remote-endpoint = <&eud_ep>;
@@ -3596,10 +3609,11 @@  system-cache-controller@9200000 {
 		};
 
 		eud: eud@88e0000 {
-			compatible = "qcom,sc7280-eud","qcom,eud";
-			reg = <0 0x088e0000 0 0x2000>,
-			      <0 0x088e2000 0 0x1000>;
+			compatible = "qcom,sc7280-eud", "qcom,eud";
+			reg = <0 0x88e0000 0 0x2000>,
+			      <0 0x88e2000 0 0x1000>;
 			interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>;
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -3610,6 +3624,7 @@  eud_ep: endpoint {
 						remote-endpoint = <&usb2_role_switch>;
 					};
 				};
+
 				port@1 {
 					reg = <1>;
 					eud_con: endpoint {
@@ -3619,21 +3634,6 @@  eud_con: endpoint {
 			};
 		};
 
-		eud_typec: connector {
-			compatible = "usb-c-connector";
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					con_eud: endpoint {
-						remote-endpoint = <&eud_con>;
-					};
-				};
-			};
-		};
-
 		nsp_noc: interconnect@a0c0000 {
 			reg = <0 0x0a0c0000 0 0x10000>;
 			compatible = "qcom,sc7280-nsp-noc";