From patchwork Sun May 7 21:19:20 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 90885 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a59:b0ea:0:b0:3b6:4342:cba0 with SMTP id b10csp1763648vqo; Sun, 7 May 2023 14:26:24 -0700 (PDT) X-Google-Smtp-Source: ACHHUZ6D02awiIRLHWIv6KhHfwEzOB4aMQ9eqMafTyeZVO1R7qJzpv9WEek6NdqUIarPOCQUXNic X-Received: by 2002:a17:902:d4c2:b0:1ac:813b:bfc0 with SMTP id o2-20020a170902d4c200b001ac813bbfc0mr187160plg.18.1683494784416; Sun, 07 May 2023 14:26:24 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1683494784; cv=none; d=google.com; s=arc-20160816; b=Ew+zPNz/2V3b41LB4k2mO2YpbmjPMW4+6oKLz/idf0v/erhtp9abqYRf0+HKYEcDmv x23ESQzCdAWbHG05qdQWq+0JR5iWC2IGx4B4h+mufLj5So2bZIliSWuJAX+eBdK4pSR+ kwacXZ2sj/Di1FgXjdSbixj04Hz4Lnr5Pn1mJQ4KK+gkAEHxVcKzx+g4iSmFv8u6hQIf ak3QpD9qAB47O115df26masmS7zRKBcGwx08Vbr0FxRH79smRUB6ipJxqjmkbQ86E4cG GMQI4G6lzYgva24/EdTgY9PER60MxNHtocuwOfnIaBe857hDB/W8g8ukrPNkFr+0vtA+ SD5A== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:cc:to:in-reply-to:references:message-id :content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=jQ1qf2e03WlPLJuXOlZ1OBamEh8pCtH4w3SZqhsTCas=; b=lgs79GuR58GNWSQLUxzZ7pMVMG2+yPc6uGCRDTnQuSsG1PWhTZ4fu67eKQQAMu0vvf Qj5M46q4gP/Y4Vm01ddo7taTGPEv5GI29/eQbmmjJESTCHizMKPxejQjG6Dvcr2oK+13 ei7GTOnzY6ET2VuJpXsTgk6nOFce8xQPQDLQ+hF0W2CPzNveXGD1g9rYv7irHOLCTNNz rXkO/s3hMG2ADFaFKduHgUn0yp1J1xU4BV1Xd98sYob5rUrQ8JvQQedCKi5SZqQLqXUY zv+jMoXlgUocaUQDDA1A6GTC6GdGjDyCmV0+366holmXJ48pXQIrwPT4UfSvqp99IlO2 3Yog== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=gOQjODFE; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id y7-20020a17090322c700b001aaee4e18dbsi7216495plg.379.2023.05.07.14.26.09; Sun, 07 May 2023 14:26:24 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=gOQjODFE; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231631AbjEGVTd (ORCPT + 99 others); Sun, 7 May 2023 17:19:33 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48214 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231589AbjEGVT2 (ORCPT ); Sun, 7 May 2023 17:19:28 -0400 Received: from mail-lf1-x12c.google.com (mail-lf1-x12c.google.com [IPv6:2a00:1450:4864:20::12c]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 44E52124B2 for ; Sun, 7 May 2023 14:19:25 -0700 (PDT) Received: by mail-lf1-x12c.google.com with SMTP id 2adb3069b0e04-4f1411e8111so4250186e87.1 for ; Sun, 07 May 2023 14:19:25 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1683494363; x=1686086363; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=jQ1qf2e03WlPLJuXOlZ1OBamEh8pCtH4w3SZqhsTCas=; b=gOQjODFEyx60bJvAHj8ImMrN5WFGCfGZkIK4W7lPRvxxDsUPO7qHekVariVG1p6T2q XKqPrP8X6LeSUZMQf6ciJS41Yee/2XzN3Yr07AYlCeFnBBsBnxwQKceRtpKNbdIT2SSq 0Utn6R2HSIFpGD9kYk4NArK3sZX0nkuBE7P84xU6h6h56DhEaLQPg6pG6EvDjxglofST izkJwJUgK99dZI3v9YqyBL+VN1d4HfgQ61HgualuYgwldluMJ4Ku+SPXiuXXTeosVZdE pBB/jX//o4r9yscalyvjy0TZLC7hwU4hRUgIXmHbMUIUf4kkdGC6BkmrBlPsMkyVUMRr cyjg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1683494363; x=1686086363; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=jQ1qf2e03WlPLJuXOlZ1OBamEh8pCtH4w3SZqhsTCas=; b=dRxfcsDo/Jdg4MsIZlmTVlUp+Y7M8ZoxajSHxNnyIQAjnuOaz/pVhLVcwmC7LWoSd0 ZDFxSmhmEagNIQGeG/103QGYqK4mJQWXlJJ/OL/D6TRuVbeK/+Ywwk0zUQzuPZXZpXlc I74rO7zZ6TAZLjyEorkx6Q8QF+r63PzTw2m+MAQ72KuoWdONjohDhGK0qCjY4EofZxp6 pRVn8Px/JJ9uu1wMaDfsfK6UuTZLHu3QG3fxo8MmTmJNQ+Icvd8CDm4dRbCp2ZN8HOz1 ja0G4b6xmaWAhQTdMX98B5NMIZvBSRRV02jNsM2MGeqRh9Uo2sWhT8gMCHESPY6FPiZz 6qlw== X-Gm-Message-State: AC+VfDzYbEOZZjV9ZDHD+RcDttBES0JohCHv5bm5MlclZ7QnDS3c/sjK BD5JJdX6seg0enDf82eEtdWOmw== X-Received: by 2002:a19:7518:0:b0:4f1:b3ab:cd61 with SMTP id y24-20020a197518000000b004f1b3abcd61mr1185315lfe.61.1683494363481; Sun, 07 May 2023 14:19:23 -0700 (PDT) Received: from [127.0.1.1] ([85.235.12.238]) by smtp.gmail.com with ESMTPSA id c27-20020ac244bb000000b004f195cc3918sm623424lfm.176.2023.05.07.14.19.22 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sun, 07 May 2023 14:19:22 -0700 (PDT) From: Linus Walleij Date: Sun, 07 May 2023 23:19:20 +0200 Subject: [PATCH v3 2/2] dt-bindings: MFD: Convert STMPE to YAML schema MIME-Version: 1.0 Message-Id: <20230426-stmpe-dt-bindings-v3-2-eac1d736e488@linaro.org> References: <20230426-stmpe-dt-bindings-v3-0-eac1d736e488@linaro.org> In-Reply-To: <20230426-stmpe-dt-bindings-v3-0-eac1d736e488@linaro.org> To: Bartosz Golaszewski , Rob Herring , Krzysztof Kozlowski , Maxime Coquelin , Alexandre Torgue , Dmitry Torokhov , Lee Jones , Philippe Schenker , Stefan Agner , Marek Vasut , Steffen Trumtrar Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-input@vger.kernel.org, Linus Walleij , Rob Herring X-Mailer: b4 0.12.1 X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_NONE, SPF_HELO_NONE,SPF_PASS,T_SCC_BODY_TEXT_LINE,URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-getmail-retrieved-from-mailbox: =?utf-8?q?INBOX?= X-GMAIL-THRID: =?utf-8?q?1765272226665632148?= X-GMAIL-MSGID: =?utf-8?q?1765272226665632148?= This converts the STMPE MFD device tree bindings to the YAML schema. Reference the existing schema for the ADC, just define the other subnode schemas directly in the MFD schema. Add two examples so we have examples covering both the simple GPIO expander and the more complex with ADC and touchscreen. Some in-tree users do not follow the naming conventions for nodes so these DTS files need to be augmented to use proper node names like "adc", "pwm", "gpio", "keyboard-controller" etc before the bindings take effect on them. Acked-by: Dmitry Torokhov Reviewed-by: Rob Herring Signed-off-by: Linus Walleij --- ChangeLog v2->v3: - Drop the required pwm properties already required by the template pwm schema. - Add the number of PWM cells as const. ChangeLog v1->v2: - Split off the GPIO bindings to their own schema, as the old bindings didn't even have any GPIO bindings. Put the GPIO schema before this schema so we can use GPIO in the examples. - Drop nodename and pattern as STMPE is not a generic name. - Add maxItems to the resets. - Make wakeup-source just :true, as it is a generic property. - Move unevaluatedProperties for subnodes right before properties as requested. - Name devices "port-expander" in the examples. - Use lowercase hex in line init. --- .../devicetree/bindings/input/stmpe-keypad.txt | 41 --- .../bindings/input/touchscreen/stmpe.txt | 108 -------- .../devicetree/bindings/mfd/st,stmpe.yaml | 297 +++++++++++++++++++++ Documentation/devicetree/bindings/mfd/stmpe.txt | 42 --- 4 files changed, 297 insertions(+), 191 deletions(-) diff --git a/Documentation/devicetree/bindings/input/stmpe-keypad.txt b/Documentation/devicetree/bindings/input/stmpe-keypad.txt deleted file mode 100644 index 12bb771d66d4..000000000000 --- a/Documentation/devicetree/bindings/input/stmpe-keypad.txt +++ /dev/null @@ -1,41 +0,0 @@ -* STMPE Keypad - -Required properties: - - compatible : "st,stmpe-keypad" - - linux,keymap : See ./matrix-keymap.txt - -Optional properties: - - debounce-interval : Debouncing interval time in milliseconds - - st,scan-count : Scanning cycles elapsed before key data is updated - - st,no-autorepeat : If specified device will not autorepeat - - keypad,num-rows : See ./matrix-keymap.txt - - keypad,num-columns : See ./matrix-keymap.txt - -Example: - - stmpe_keypad { - compatible = "st,stmpe-keypad"; - - debounce-interval = <64>; - st,scan-count = <8>; - st,no-autorepeat; - - linux,keymap = <0x205006b - 0x4010074 - 0x3050072 - 0x1030004 - 0x502006a - 0x500000a - 0x5008b - 0x706001c - 0x405000b - 0x6070003 - 0x3040067 - 0x303006c - 0x60400e7 - 0x602009e - 0x4020073 - 0x5050002 - 0x4030069 - 0x3020008>; - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt deleted file mode 100644 index 238b51555c04..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt +++ /dev/null @@ -1,108 +0,0 @@ -STMPE Touchscreen ----------------- - -Required properties: - - compatible: "st,stmpe-ts" - -Optional properties: -- st,ave-ctrl : Sample average control - 0 -> 1 sample - 1 -> 2 samples - 2 -> 4 samples - 3 -> 8 samples -- st,touch-det-delay : Touch detect interrupt delay (recommended is 3) - 0 -> 10 us - 1 -> 50 us - 2 -> 100 us - 3 -> 500 us - 4 -> 1 ms - 5 -> 5 ms - 6 -> 10 ms - 7 -> 50 ms -- st,settling : Panel driver settling time (recommended is 2) - 0 -> 10 us - 1 -> 100 us - 2 -> 500 us - 3 -> 1 ms - 4 -> 5 ms - 5 -> 10 ms - 6 -> 50 ms - 7 -> 100 ms -- st,fraction-z : Length of the fractional part in z (recommended is 7) - (fraction-z ([0..7]) = Count of the fractional part) -- st,i-drive : current limit value of the touchscreen drivers - 0 -> 20 mA (typical 35mA max) - 1 -> 50 mA (typical 80 mA max) - -Optional properties common with MFD (deprecated): - - st,sample-time : ADC conversion time in number of clock. - 0 -> 36 clocks - 1 -> 44 clocks - 2 -> 56 clocks - 3 -> 64 clocks - 4 -> 80 clocks (recommended) - 5 -> 96 clocks - 6 -> 124 clocks - - st,mod-12b : ADC Bit mode - 0 -> 10bit ADC - 1 -> 12bit ADC - - st,ref-sel : ADC reference source - 0 -> internal - 1 -> external - - st,adc-freq : ADC Clock speed - 0 -> 1.625 MHz - 1 -> 3.25 MHz - 2 || 3 -> 6.5 MHz - -Node should be child node of stmpe node to which it belongs. - -Note that common ADC settings of stmpe_touchscreen (child) will take precedence -over the settings done in MFD. - -Example: - -stmpe811@41 { - compatible = "st,stmpe811"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_touch_int>; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x41>; - interrupts = <10 IRQ_TYPE_LEVEL_LOW>; - interrupt-parent = <&gpio4>; - interrupt-controller; - id = <0>; - blocks = <0x5>; - irq-trigger = <0x1>; - /* Common ADC settings */ - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; - - stmpe_touchscreen { - compatible = "st,stmpe-ts"; - reg = <0>; - /* 8 sample average control */ - st,ave-ctrl = <3>; - /* 5 ms touch detect interrupt delay */ - st,touch-det-delay = <5>; - /* 1 ms panel driver settling time */ - st,settling = <3>; - /* 7 length fractional part in z */ - st,fraction-z = <7>; - /* - * 50 mA typical 80 mA max touchscreen drivers - * current limit value - */ - st,i-drive = <1>; - }; - stmpe_adc { - compatible = "st,stmpe-adc"; - st,norequest-mask = <0x0F>; - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/st,stmpe.yaml b/Documentation/devicetree/bindings/mfd/st,stmpe.yaml new file mode 100644 index 000000000000..b77cc3f3075d --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/st,stmpe.yaml @@ -0,0 +1,297 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/st,stmpe.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectonics Port Expander (STMPE) + +description: STMicroelectronics Port Expander (STMPE) is a series of slow + bus controllers for various expanded peripherals such as GPIO, keypad, + touchscreen, ADC, PWM or rotator. It can contain one or several different + peripherals connected to SPI or I2C. + +maintainers: + - Linus Walleij + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - st,stmpe601 + - st,stmpe801 + - st,stmpe811 + - st,stmpe1600 + - st,stmpe1601 + - st,stmpe2401 + - st,stmpe2403 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vcc-supply: true + + vio-supply: true + + reset-gpios: + maxItems: 1 + + wakeup-source: true + + st,autosleep-timeout: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 4, 16, 32, 64, 128, 256, 512, 1024 ] + description: Time idle before going to automatic sleep to save power + + st,sample-time: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3, 4, 5, 6 ] + description: | + Sample time per iteration + 0 = 36 clock ticks + 1 = 44 clock ticks + 2 = 56 clock ticks + 3 = 64 clock ticks + 4 = 80 clock ticks - recommended + 5 = 96 clock ticks + 6 = 124 clock ticks + + st,mod-12b: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: ADC bit mode 0 = 10bit ADC, 1 = 12bit ADC + + st,ref-sel: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: ADC reference source 0 = internal, 1 = external + + st,adc-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + description: | + ADC clock speed + 0 = 1.625 MHz + 1 = 3.25 MHz + 2, 3 = 6.5 MHz + + adc: + type: object + $ref: /schemas/iio/adc/st,stmpe-adc.yaml# + + gpio: + type: object + $ref: /schemas/gpio/st,stmpe-gpio.yaml# + + keyboard-controller: + type: object + $ref: /schemas/input/matrix-keymap.yaml# + + unevaluatedProperties: false + + properties: + compatible: + const: st,stmpe-keypad + + debounce-interval: + description: Debouncing interval in milliseconds + $ref: /schemas/types.yaml#/definitions/uint32 + + st,no-autorepeat: + description: If present, the keys will not autorepeat when pressed + $ref: /schemas/types.yaml#/definitions/flag + + st,scan-count: + description: Scanning cycles elapsed before key data is updated + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - compatible + - linux,keymap + + pwm: + type: object + $ref: /schemas/pwm/pwm.yaml# + + unevaluatedProperties: false + + properties: + compatible: + const: st,stmpe-pwm + + "#pwm-cells": + const: 2 + + touchscreen: + type: object + $ref: /schemas/input/touchscreen/touchscreen.yaml# + + unevaluatedProperties: false + + properties: + compatible: + const: st,stmpe-ts + + st,ave-ctrl: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + description: | + Sample average control + 0 = 1 sample + 1 = 2 samples + 2 = 4 samples + 3 = 8 samples + + st,touch-det-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ] + description: | + Touch detection delay + 0 = 10 us + 1 = 50 us + 2 = 100 us + 3 = 500 us - recommended + 4 = 1 ms + 5 = 5 ms + 6 = 10 ms + 7 = 50 ms + + st,settling: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ] + description: | + Panel driver settling time + 0 = 10 us + 1 = 100 us + 2 = 500 us - recommended + 3 = 1 ms + 4 = 5 ms + 5 = 10 ms + 6 = 50 ms + 7 = 100 ms + + st,fraction-z: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ] + description: Length of the fractional part in z, recommended is 7 + (fraction-z ([0..7]) = Count of the fractional part) + + st,i-drive: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: | + current limit value of the touchscreen drivers + 0 = 20 mA (typical 35 mA max) + 1 = 50 mA (typical 80 mA max) + + required: + - compatible + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + port-expander@43 { + compatible = "st,stmpe2401"; + reg = <0x43>; + reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio>; + vcc-supply = <&db8500_vsmps2_reg>; + vio-supply = <&db8500_vsmps2_reg>; + wakeup-source; + st,autosleep-timeout = <1024>; + + gpio { + compatible = "st,stmpe-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + st,norequest-mask = <0xf0f002>; + }; + + keyboard-controller { + compatible = "st,stmpe-keypad"; + debounce-interval = <64>; + st,scan-count = <8>; + st,no-autorepeat; + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = < + MATRIX_KEY(0x00, 0x00, KEY_1) + MATRIX_KEY(0x00, 0x01, KEY_2) + MATRIX_KEY(0x00, 0x02, KEY_3) + MATRIX_KEY(0x00, 0x03, KEY_4) + MATRIX_KEY(0x00, 0x04, KEY_5) + MATRIX_KEY(0x00, 0x05, KEY_6) + MATRIX_KEY(0x00, 0x06, KEY_7) + MATRIX_KEY(0x00, 0x07, KEY_8) + MATRIX_KEY(0x00, 0x08, KEY_9) + MATRIX_KEY(0x00, 0x09, KEY_0) + >; + }; + + pwm { + compatible = "st,stmpe-pwm"; + #pwm-cells = <2>; + }; + }; + + port-expander@41 { + compatible = "st,stmpe811"; + reg = <0x41>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio>; + st,adc-freq = <1>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,sample-time = <4>; + + adc { + compatible = "st,stmpe-adc"; + st,norequest-mask = <0x0f>; + #io-channel-cells = <1>; + }; + + gpio { + compatible = "st,stmpe-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pwm { + compatible = "st,stmpe-pwm"; + #pwm-cells = <2>; + }; + + touchscreen { + compatible = "st,stmpe-ts"; + st,ave-ctrl = <3>; + st,touch-det-delay = <5>; + st,settling = <3>; + st,fraction-z = <7>; + st,i-drive = <1>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/stmpe.txt b/Documentation/devicetree/bindings/mfd/stmpe.txt deleted file mode 100644 index d4408a417193..000000000000 --- a/Documentation/devicetree/bindings/mfd/stmpe.txt +++ /dev/null @@ -1,42 +0,0 @@ -* ST Microelectronics STMPE Multi-Functional Device - -STMPE is an MFD device which may expose the following inbuilt devices: gpio, -keypad, touchscreen, adc, pwm, rotator. - -Required properties: - - compatible : "st,stmpe[610|801|811|1600|1601|2401|2403]" - - reg : I2C/SPI address of the device - -Optional properties: - - interrupts : The interrupt outputs from the controller - - interrupt-controller : Marks the device node as an interrupt controller - - wakeup-source : Marks the input device as wakable - - st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024 - - irq-gpio : If present, which GPIO to use for event IRQ - -Optional properties for devices with touch and ADC (STMPE811|STMPE610): - - st,sample-time : ADC conversion time in number of clock. - 0 -> 36 clocks 4 -> 80 clocks (recommended) - 1 -> 44 clocks 5 -> 96 clocks - 2 -> 56 clocks 6 -> 124 clocks - 3 -> 64 clocks - - st,mod-12b : ADC Bit mode - 0 -> 10bit ADC 1 -> 12bit ADC - - st,ref-sel : ADC reference source - 0 -> internal 1 -> external - - st,adc-freq : ADC Clock speed - 0 -> 1.625 MHz 2 || 3 -> 6.5 MHz - 1 -> 3.25 MHz - -Example: - - stmpe1601: stmpe1601@40 { - compatible = "st,stmpe1601"; - reg = <0x40>; - interrupts = <26 0x4>; - interrupt-parent = <&gpio6>; - interrupt-controller; - - wakeup-source; - st,autosleep-timeout = <1024>; - };