On Tue, Apr 25, 2023 at 03:30:50PM +0200, bchihi@baylibre.com wrote:
> From: Balsam CHIHI <bchihi@baylibre.com>
>
> Add LVTS Driver support for MT8192.
>
> Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
> Co-developed-by : Nícolas F. R. A. Prado <nfraprado@collabora.com>
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> ---
> drivers/thermal/mediatek/lvts_thermal.c | 92 +++++++++++++++++++++++++
> 1 file changed, 92 insertions(+)
>
> diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
> index 5ea8a9d569ea6..8df7b4c72a658 100644
> --- a/drivers/thermal/mediatek/lvts_thermal.c
> +++ b/drivers/thermal/mediatek/lvts_thermal.c
[..]
> +static const struct lvts_ctrl_data mt8192_lvts_mcu_data_ctrl[] = {
> + {
> + .cal_offset = { 0x04, 0x08 },
> + .lvts_sensor = {
> + { .dt_id = MT8192_MCU_BIG_CPU0 },
> + { .dt_id = MT8192_MCU_BIG_CPU1 }
> + },
> + .num_lvts_sensor = 2,
> + .offset = 0x0,
> + .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
Hi Balsam,
during the investigation I did to fix the interrupt issues I mentioned in v1, I
noticed that the threshold interrupts (hot, hot to normal, cold), only trigger
when the controller is configured to filtered mode. In immediate mode the
threshold interrupts are not triggered.
So I say we add
.mode = LVTS_MSR_FILTERED_MODE,
for all the controllers here. Same for MT8195, although I guess that'd be better
done in a separate series. And I haven't had time to test more on MT8195 to see
if I can get any interrupts there.
One issue with filtered mode is that the data read is often not ready (valid bit
unset), so most of the time it returns -EAGAIN. But I think that should be easy
to address by reading with a timeout (equal to the measurement interval we
already know), instead of a single time, if on filtered mode.
I'll also try to review the other commits in this series, though that'll have to
wait for next week.
Thanks,
Nícolas
@@ -80,6 +80,7 @@
#define LVTS_MSR_FILTERED_MODE 1
#define LVTS_HW_SHUTDOWN_MT8195 105000
+#define LVTS_HW_SHUTDOWN_MT8192 105000
static int golden_temp = LVTS_GOLDEN_TEMP_DEFAULT;
static int coeff_b = LVTS_COEFF_B;
@@ -1280,6 +1281,85 @@ static const struct lvts_ctrl_data mt8195_lvts_ap_data_ctrl[] = {
}
};
+static const struct lvts_ctrl_data mt8192_lvts_mcu_data_ctrl[] = {
+ {
+ .cal_offset = { 0x04, 0x08 },
+ .lvts_sensor = {
+ { .dt_id = MT8192_MCU_BIG_CPU0 },
+ { .dt_id = MT8192_MCU_BIG_CPU1 }
+ },
+ .num_lvts_sensor = 2,
+ .offset = 0x0,
+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
+ },
+ {
+ .cal_offset = { 0x0c, 0x10 },
+ .lvts_sensor = {
+ { .dt_id = MT8192_MCU_BIG_CPU2 },
+ { .dt_id = MT8192_MCU_BIG_CPU3 }
+ },
+ .num_lvts_sensor = 2,
+ .offset = 0x100,
+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
+ },
+ {
+ .cal_offset = { 0x14, 0x18, 0x1c, 0x20 },
+ .lvts_sensor = {
+ { .dt_id = MT8192_MCU_LITTLE_CPU0 },
+ { .dt_id = MT8192_MCU_LITTLE_CPU1 },
+ { .dt_id = MT8192_MCU_LITTLE_CPU2 },
+ { .dt_id = MT8192_MCU_LITTLE_CPU3 }
+ },
+ .num_lvts_sensor = 4,
+ .offset = 0x200,
+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
+ }
+};
+
+static const struct lvts_ctrl_data mt8192_lvts_ap_data_ctrl[] = {
+ {
+ .cal_offset = { 0x24, 0x28 },
+ .lvts_sensor = {
+ { .dt_id = MT8192_AP_VPU0 },
+ { .dt_id = MT8192_AP_VPU1 }
+ },
+ .num_lvts_sensor = 2,
+ .offset = 0x0,
+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
+ },
+ {
+ .cal_offset = { 0x2c, 0x30 },
+ .lvts_sensor = {
+ { .dt_id = MT8192_AP_GPU0 },
+ { .dt_id = MT8192_AP_GPU1 }
+ },
+ .num_lvts_sensor = 2,
+ .offset = 0x100,
+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
+ },
+ {
+ .cal_offset = { 0x34, 0x38 },
+ .lvts_sensor = {
+ { .dt_id = MT8192_AP_INFRA },
+ { .dt_id = MT8192_AP_CAM },
+ },
+ .num_lvts_sensor = 2,
+ .offset = 0x200,
+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
+ },
+ {
+ .cal_offset = { 0x3c, 0x40, 0x44 },
+ .lvts_sensor = {
+ { .dt_id = MT8192_AP_MD0 },
+ { .dt_id = MT8192_AP_MD1 },
+ { .dt_id = MT8192_AP_MD2 }
+ },
+ .num_lvts_sensor = 3,
+ .offset = 0x300,
+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
+ }
+};
+
static const struct lvts_data mt8195_lvts_mcu_data = {
.lvts_ctrl = mt8195_lvts_mcu_data_ctrl,
.num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_mcu_data_ctrl),
@@ -1290,9 +1370,21 @@ static const struct lvts_data mt8195_lvts_ap_data = {
.num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_ap_data_ctrl),
};
+static const struct lvts_data mt8192_lvts_mcu_data = {
+ .lvts_ctrl = mt8192_lvts_mcu_data_ctrl,
+ .num_lvts_ctrl = ARRAY_SIZE(mt8192_lvts_mcu_data_ctrl),
+};
+
+static const struct lvts_data mt8192_lvts_ap_data = {
+ .lvts_ctrl = mt8192_lvts_ap_data_ctrl,
+ .num_lvts_ctrl = ARRAY_SIZE(mt8192_lvts_ap_data_ctrl),
+};
+
static const struct of_device_id lvts_of_match[] = {
{ .compatible = "mediatek,mt8195-lvts-mcu", .data = &mt8195_lvts_mcu_data },
{ .compatible = "mediatek,mt8195-lvts-ap", .data = &mt8195_lvts_ap_data },
+ { .compatible = "mediatek,mt8192-lvts-mcu", .data = &mt8192_lvts_mcu_data },
+ { .compatible = "mediatek,mt8192-lvts-ap", .data = &mt8192_lvts_ap_data },
{},
};
MODULE_DEVICE_TABLE(of, lvts_of_match);