[v5,06/10] clk: starfive: Add StarFive JH7110 Video-Output clock driver

Message ID 20230424135409.6648-7-xingyu.wu@starfivetech.com
State New
Headers
Series Add STG/ISP/VOUT clock and reset drivers for StarFive JH7110 |

Commit Message

Xingyu Wu April 24, 2023, 1:54 p.m. UTC
  Add driver for the StarFive JH7110 Video-Output clock controller.
And these clock controllers should power on and enable the clocks from
SYSCRG first before registering.

Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
---
 drivers/clk/starfive/Kconfig                  |  11 +
 drivers/clk/starfive/Makefile                 |   1 +
 .../clk/starfive/clk-starfive-jh7110-vout.c   | 239 ++++++++++++++++++
 3 files changed, 251 insertions(+)
 create mode 100644 drivers/clk/starfive/clk-starfive-jh7110-vout.c
  

Comments

Aurelien Jarno May 14, 2023, 9:46 p.m. UTC | #1
On 2023-04-24 21:54, Xingyu Wu wrote:
> Add driver for the StarFive JH7110 Video-Output clock controller.
> And these clock controllers should power on and enable the clocks from
> SYSCRG first before registering.
> 
> Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>

There seems to be something wrong with this patch. Building the kernel
with the whole series applied and with CONFIG_FORTIFY_SOURCE=y triggers
the following kernel bug: 

[   75.705103] detected buffer overflow in __fortify_strlen
[   75.710497] ------------[ cut here ]------------
[   75.715117] kernel BUG at lib/string_helpers.c:1027!
[   75.720083] Kernel BUG [#1]
[   75.722879] Modules linked in: clk_starfive_jh7110_vout(+) nvme_fabrics binfmt_misc starfive_wdt jh7110_trng watchdog sfctemp rng_core drm loop fuse drm_panel_orientation_quirks configfs ip_tables x_tables autofs4 ext4 crc32c_generic crc16 mbcache jbd2 dm_mod nvme nvme_core t10_pi crc64_rocksoft crc64 crc_t10dif crct10dif_generic crct10dif_common xhci_pci xhci_hcd mmc_block dwmac_starfive stmmac_platform stmmac usbcore pcs_xpcs of_mdio fixed_phy fwnode_mdio phylink libphy usb_common dw_mmc_starfive dw_mmc_pltfm clk_starfive_jh7110_isp dw_mmc clk_starfive_jh7110_aon ptp phy_starfive_dphy_rx mmc_core pps_core phy_jh7110_pcie i2c_designware_platform clk_starfive_jh7110_stg phy_jh7110_usb i2c_designware_core
[   75.785411] CPU: 1 PID: 419 Comm: insmod Not tainted 6.3.1+ #1
[   75.791241] Hardware name: StarFive VisionFive 2 v1.2A (DT)
[   75.796809] epc : fortify_panic+0x1a/0x1c
[   75.800828]  ra : fortify_panic+0x1a/0x1c
[   75.804838] epc : ffffffff80874242 ra : ffffffff80874242 sp : ffffffc80454b6a0
[   75.812054]  gp : ffffffff8157f008 tp : ffffffd8c1214f80 t0 : 6465746365746564
[   75.819269]  t1 : 0000000000000064 t2 : 2064657463657465 s0 : ffffffc80454b6b0
[   75.826483]  s1 : 0000000000000020 a0 : 000000000000002c a1 : ffffffd8fdd63688
[   75.833697]  a2 : ffffffd8fdd6f8e8 a3 : 0000000000000000 a4 : 0000000000000000
[   75.840912]  a5 : 0000000000000000 a6 : ffffffff81426a38 a7 : 0000000000000000
[   75.848126]  s2 : ffffffff80ec4e00 s3 : ffffffd8d9e28008 s4 : 000000000000001f
[   75.855340]  s5 : 0000000000000000 s6 : ffffffff81580798 s7 : 0000000000ffffff
[   75.862555]  s8 : ffffffd8d9e29ab0 s9 : 0000000000000011 s10: ffffffff017312a0
[   75.869770]  s11: ffffffff01731450 t3 : ffffffff81592df7 t4 : ffffffff81592df7
[   75.876984]  t5 : ffffffff81592df8 t6 : ffffffc80454b4a8
[   75.882290] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003
[   75.890199] [<ffffffff80874242>] fortify_panic+0x1a/0x1c
[   75.895513] [<ffffffff805c7e20>] auxiliary_match_id+0x70/0xcc
[   75.901262] [<ffffffff805c7f22>] auxiliary_match+0x1e/0x2a
[   75.906749] [<ffffffff805bd6b0>] __device_attach_driver+0x2c/0xe4
[   75.912841] [<ffffffff805bb04e>] bus_for_each_drv+0x70/0xc4
[   75.918418] [<ffffffff805bdb0a>] __device_attach+0x94/0x198
[   75.923989] [<ffffffff805bde68>] device_initial_probe+0x1a/0x22
[   75.929908] [<ffffffff805bc146>] bus_probe_device+0x96/0x98
[   75.935482] [<ffffffff805b971e>] device_add+0x56a/0x722
[   75.940710] [<ffffffff805c7fc4>] __auxiliary_device_add+0x40/0x92
[   75.946803] [<ffffffff80556ff4>] jh7110_reset_controller_register+0x92/0xca
[   75.953765] [<ffffffff0173034c>] jh7110_voutcrg_probe+0x236/0x2fa [clk_starfive_jh7110_vout]
[   75.962228] [<ffffffff805bfb40>] platform_probe+0x5e/0xa6
[   75.967629] [<ffffffff805bd1e6>] really_probe+0xa0/0x342
[   75.972940] [<ffffffff805bd508>] __driver_probe_device+0x80/0x138
[   75.979031] [<ffffffff805bd5f8>] driver_probe_device+0x38/0xc4
[   75.984863] [<ffffffff805bd83a>] __driver_attach+0xd2/0x1a8
[   75.990436] [<ffffffff805baf92>] bus_for_each_dev+0x6c/0xb8
[   75.996011] [<ffffffff805bcab6>] driver_attach+0x26/0x2e
[   76.001325] [<ffffffff805bc384>] bus_add_driver+0x10c/0x1ee
[   76.006900] [<ffffffff805be5e2>] driver_register+0x52/0xf4
[   76.012386] [<ffffffff805bf78e>] __platform_driver_register+0x28/0x30
[   76.018827] [<ffffffff01b72028>] jh7110_voutcrg_driver_init+0x28/0x1000 [clk_starfive_jh7110_vout]
[   76.027802] [<ffffffff8000281a>] do_one_initcall+0x5c/0x1c8
[   76.033377] [<ffffffff800a7612>] do_init_module+0x4c/0x1f6
[   76.038867] [<ffffffff800a9396>] load_module+0x1a6c/0x1ebe
[   76.044356] [<ffffffff800a99ea>] __do_sys_finit_module+0x9c/0xf8
[   76.050365] [<ffffffff800a9a82>] sys_finit_module+0x1c/0x24
[   76.055936] [<ffffffff80003df8>] ret_from_syscall+0x0/0x2
[   76.061343] Code: 0800 85aa 3517 007a 0513 7ee5 a097 ffff 80e7 fc20 (9002) 7179 
[   76.068735] ---[ end trace 0000000000000000 ]---
  
Xingyu Wu May 15, 2023, 3:23 a.m. UTC | #2
On 2023/5/15 5:46, Aurelien Jarno wrote:
> On 2023-04-24 21:54, Xingyu Wu wrote:
>> Add driver for the StarFive JH7110 Video-Output clock controller.
>> And these clock controllers should power on and enable the clocks from
>> SYSCRG first before registering.
>> 
>> Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
> 
> There seems to be something wrong with this patch. Building the kernel
> with the whole series applied and with CONFIG_FORTIFY_SOURCE=y triggers
> the following kernel bug: 
> 
> [   75.705103] detected buffer overflow in __fortify_strlen
> [   75.710497] ------------[ cut here ]------------
> [   75.715117] kernel BUG at lib/string_helpers.c:1027!
> [   75.720083] Kernel BUG [#1]
> [   75.722879] Modules linked in: clk_starfive_jh7110_vout(+) nvme_fabrics binfmt_misc starfive_wdt jh7110_trng watchdog sfctemp rng_core drm loop fuse drm_panel_orientation_quirks configfs ip_tables x_tables autofs4 ext4 crc32c_generic crc16 mbcache jbd2 dm_mod nvme nvme_core t10_pi crc64_rocksoft crc64 crc_t10dif crct10dif_generic crct10dif_common xhci_pci xhci_hcd mmc_block dwmac_starfive stmmac_platform stmmac usbcore pcs_xpcs of_mdio fixed_phy fwnode_mdio phylink libphy usb_common dw_mmc_starfive dw_mmc_pltfm clk_starfive_jh7110_isp dw_mmc clk_starfive_jh7110_aon ptp phy_starfive_dphy_rx mmc_core pps_core phy_jh7110_pcie i2c_designware_platform clk_starfive_jh7110_stg phy_jh7110_usb i2c_designware_core
> [   75.785411] CPU: 1 PID: 419 Comm: insmod Not tainted 6.3.1+ #1
> [   75.791241] Hardware name: StarFive VisionFive 2 v1.2A (DT)
> [   75.796809] epc : fortify_panic+0x1a/0x1c
> [   75.800828]  ra : fortify_panic+0x1a/0x1c
> [   75.804838] epc : ffffffff80874242 ra : ffffffff80874242 sp : ffffffc80454b6a0
> [   75.812054]  gp : ffffffff8157f008 tp : ffffffd8c1214f80 t0 : 6465746365746564
> [   75.819269]  t1 : 0000000000000064 t2 : 2064657463657465 s0 : ffffffc80454b6b0
> [   75.826483]  s1 : 0000000000000020 a0 : 000000000000002c a1 : ffffffd8fdd63688
> [   75.833697]  a2 : ffffffd8fdd6f8e8 a3 : 0000000000000000 a4 : 0000000000000000
> [   75.840912]  a5 : 0000000000000000 a6 : ffffffff81426a38 a7 : 0000000000000000
> [   75.848126]  s2 : ffffffff80ec4e00 s3 : ffffffd8d9e28008 s4 : 000000000000001f
> [   75.855340]  s5 : 0000000000000000 s6 : ffffffff81580798 s7 : 0000000000ffffff
> [   75.862555]  s8 : ffffffd8d9e29ab0 s9 : 0000000000000011 s10: ffffffff017312a0
> [   75.869770]  s11: ffffffff01731450 t3 : ffffffff81592df7 t4 : ffffffff81592df7
> [   75.876984]  t5 : ffffffff81592df8 t6 : ffffffc80454b4a8
> [   75.882290] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003
> [   75.890199] [<ffffffff80874242>] fortify_panic+0x1a/0x1c
> [   75.895513] [<ffffffff805c7e20>] auxiliary_match_id+0x70/0xcc
> [   75.901262] [<ffffffff805c7f22>] auxiliary_match+0x1e/0x2a
> [   75.906749] [<ffffffff805bd6b0>] __device_attach_driver+0x2c/0xe4
> [   75.912841] [<ffffffff805bb04e>] bus_for_each_drv+0x70/0xc4
> [   75.918418] [<ffffffff805bdb0a>] __device_attach+0x94/0x198
> [   75.923989] [<ffffffff805bde68>] device_initial_probe+0x1a/0x22
> [   75.929908] [<ffffffff805bc146>] bus_probe_device+0x96/0x98
> [   75.935482] [<ffffffff805b971e>] device_add+0x56a/0x722
> [   75.940710] [<ffffffff805c7fc4>] __auxiliary_device_add+0x40/0x92
> [   75.946803] [<ffffffff80556ff4>] jh7110_reset_controller_register+0x92/0xca
> [   75.953765] [<ffffffff0173034c>] jh7110_voutcrg_probe+0x236/0x2fa [clk_starfive_jh7110_vout]
> [   75.962228] [<ffffffff805bfb40>] platform_probe+0x5e/0xa6
> [   75.967629] [<ffffffff805bd1e6>] really_probe+0xa0/0x342
> [   75.972940] [<ffffffff805bd508>] __driver_probe_device+0x80/0x138
> [   75.979031] [<ffffffff805bd5f8>] driver_probe_device+0x38/0xc4
> [   75.984863] [<ffffffff805bd83a>] __driver_attach+0xd2/0x1a8
> [   75.990436] [<ffffffff805baf92>] bus_for_each_dev+0x6c/0xb8
> [   75.996011] [<ffffffff805bcab6>] driver_attach+0x26/0x2e
> [   76.001325] [<ffffffff805bc384>] bus_add_driver+0x10c/0x1ee
> [   76.006900] [<ffffffff805be5e2>] driver_register+0x52/0xf4
> [   76.012386] [<ffffffff805bf78e>] __platform_driver_register+0x28/0x30
> [   76.018827] [<ffffffff01b72028>] jh7110_voutcrg_driver_init+0x28/0x1000 [clk_starfive_jh7110_vout]
> [   76.027802] [<ffffffff8000281a>] do_one_initcall+0x5c/0x1c8
> [   76.033377] [<ffffffff800a7612>] do_init_module+0x4c/0x1f6
> [   76.038867] [<ffffffff800a9396>] load_module+0x1a6c/0x1ebe
> [   76.044356] [<ffffffff800a99ea>] __do_sys_finit_module+0x9c/0xf8
> [   76.050365] [<ffffffff800a9a82>] sys_finit_module+0x1c/0x24
> [   76.055936] [<ffffffff80003df8>] ret_from_syscall+0x0/0x2
> [   76.061343] Code: 0800 85aa 3517 007a 0513 7ee5 a097 ffff 80e7 fc20 (9002) 7179 
> [   76.068735] ---[ end trace 0000000000000000 ]---
> 

I got the recurrence of this with CONFIG_FORTIFY_SOURCE=y.
And I found the problem that the reset name of auxiliary_device_id in VOUTCRG
is exactly 32 characters. I rename the reset of auxiliary_device_id in VOUTCRG
to a shorter name and fix the problem. And I will fix it in next patch.

Best regards,
Xingyu Wu
  

Patch

diff --git a/drivers/clk/starfive/Kconfig b/drivers/clk/starfive/Kconfig
index 0a63a47e4b97..c506de9346c5 100644
--- a/drivers/clk/starfive/Kconfig
+++ b/drivers/clk/starfive/Kconfig
@@ -61,3 +61,14 @@  config CLK_STARFIVE_JH7110_ISP
 	help
 	  Say yes here to support the Image-Signal-Process clock controller
 	  on the StarFive JH7110 SoC.
+
+config CLK_STARFIVE_JH7110_VOUT
+	tristate "StarFive JH7110 Video-Output clock support"
+	depends on CLK_STARFIVE_JH7110_SYS && JH71XX_PMU
+	select AUXILIARY_BUS
+	select CLK_STARFIVE_JH71X0
+	select RESET_STARFIVE_JH7110
+	default m if ARCH_STARFIVE
+	help
+	  Say yes here to support the Video-Output clock controller
+	  on the StarFive JH7110 SoC.
diff --git a/drivers/clk/starfive/Makefile b/drivers/clk/starfive/Makefile
index 76fb9f8d628b..841377e45bb6 100644
--- a/drivers/clk/starfive/Makefile
+++ b/drivers/clk/starfive/Makefile
@@ -8,3 +8,4 @@  obj-$(CONFIG_CLK_STARFIVE_JH7110_SYS)	+= clk-starfive-jh7110-sys.o
 obj-$(CONFIG_CLK_STARFIVE_JH7110_AON)	+= clk-starfive-jh7110-aon.o
 obj-$(CONFIG_CLK_STARFIVE_JH7110_STG)	+= clk-starfive-jh7110-stg.o
 obj-$(CONFIG_CLK_STARFIVE_JH7110_ISP)	+= clk-starfive-jh7110-isp.o
+obj-$(CONFIG_CLK_STARFIVE_JH7110_VOUT)	+= clk-starfive-jh7110-vout.o
diff --git a/drivers/clk/starfive/clk-starfive-jh7110-vout.c b/drivers/clk/starfive/clk-starfive-jh7110-vout.c
new file mode 100644
index 000000000000..e5ef0c8c0494
--- /dev/null
+++ b/drivers/clk/starfive/clk-starfive-jh7110-vout.c
@@ -0,0 +1,239 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * StarFive JH7110 Video-Output Clock Driver
+ *
+ * Copyright (C) 2022-2023 StarFive Technology Co., Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+
+#include <dt-bindings/clock/starfive,jh7110-crg.h>
+
+#include "clk-starfive-jh7110.h"
+
+/* external clocks */
+#define JH7110_VOUTCLK_VOUT_SRC			(JH7110_VOUTCLK_END + 0)
+#define JH7110_VOUTCLK_VOUT_TOP_AHB		(JH7110_VOUTCLK_END + 1)
+#define JH7110_VOUTCLK_VOUT_TOP_AXI		(JH7110_VOUTCLK_END + 2)
+#define JH7110_VOUTCLK_VOUT_TOP_HDMITX0_MCLK	(JH7110_VOUTCLK_END + 3)
+#define JH7110_VOUTCLK_I2STX0_BCLK		(JH7110_VOUTCLK_END + 4)
+#define JH7110_VOUTCLK_HDMITX0_PIXELCLK		(JH7110_VOUTCLK_END + 5)
+#define JH7110_VOUTCLK_EXT_END			(JH7110_VOUTCLK_END + 6)
+
+static struct clk_bulk_data jh7110_vout_top_clks[] = {
+	{ .id = "vout_src" },
+	{ .id = "vout_top_ahb" }
+};
+
+static const struct jh71x0_clk_data jh7110_voutclk_data[] = {
+	/* divider */
+	JH71X0__DIV(JH7110_VOUTCLK_APB, "apb", 8, JH7110_VOUTCLK_VOUT_TOP_AHB),
+	JH71X0__DIV(JH7110_VOUTCLK_DC8200_PIX, "dc8200_pix", 63, JH7110_VOUTCLK_VOUT_SRC),
+	JH71X0__DIV(JH7110_VOUTCLK_DSI_SYS, "dsi_sys", 31, JH7110_VOUTCLK_VOUT_SRC),
+	JH71X0__DIV(JH7110_VOUTCLK_TX_ESC, "tx_esc", 31, JH7110_VOUTCLK_VOUT_TOP_AHB),
+	/* dc8200 */
+	JH71X0_GATE(JH7110_VOUTCLK_DC8200_AXI, "dc8200_axi", 0, JH7110_VOUTCLK_VOUT_TOP_AXI),
+	JH71X0_GATE(JH7110_VOUTCLK_DC8200_CORE, "dc8200_core", 0, JH7110_VOUTCLK_VOUT_TOP_AXI),
+	JH71X0_GATE(JH7110_VOUTCLK_DC8200_AHB, "dc8200_ahb", 0, JH7110_VOUTCLK_VOUT_TOP_AHB),
+	JH71X0_GMUX(JH7110_VOUTCLK_DC8200_PIX0, "dc8200_pix0", 0, 2,
+		    JH7110_VOUTCLK_DC8200_PIX,
+		    JH7110_VOUTCLK_HDMITX0_PIXELCLK),
+	JH71X0_GMUX(JH7110_VOUTCLK_DC8200_PIX1, "dc8200_pix1", 0, 2,
+		    JH7110_VOUTCLK_DC8200_PIX,
+		    JH7110_VOUTCLK_HDMITX0_PIXELCLK),
+	/* LCD */
+	JH71X0_GMUX(JH7110_VOUTCLK_DOM_VOUT_TOP_LCD, "dom_vout_top_lcd", 0, 2,
+		    JH7110_VOUTCLK_DC8200_PIX0,
+		    JH7110_VOUTCLK_DC8200_PIX1),
+	/* dsiTx */
+	JH71X0_GATE(JH7110_VOUTCLK_DSITX_APB, "dsiTx_apb", 0, JH7110_VOUTCLK_DSI_SYS),
+	JH71X0_GATE(JH7110_VOUTCLK_DSITX_SYS, "dsiTx_sys", 0, JH7110_VOUTCLK_DSI_SYS),
+	JH71X0_GMUX(JH7110_VOUTCLK_DSITX_DPI, "dsiTx_dpi", 0, 2,
+		    JH7110_VOUTCLK_DC8200_PIX,
+		    JH7110_VOUTCLK_HDMITX0_PIXELCLK),
+	JH71X0_GATE(JH7110_VOUTCLK_DSITX_TXESC, "dsiTx_txesc", 0, JH7110_VOUTCLK_TX_ESC),
+	/* mipitx DPHY */
+	JH71X0_GATE(JH7110_VOUTCLK_MIPITX_DPHY_TXESC, "mipitx_dphy_txesc", 0,
+		    JH7110_VOUTCLK_TX_ESC),
+	/* hdmi */
+	JH71X0_GATE(JH7110_VOUTCLK_HDMI_TX_MCLK, "hdmi_tx_mclk", 0,
+		    JH7110_VOUTCLK_VOUT_TOP_HDMITX0_MCLK),
+	JH71X0_GATE(JH7110_VOUTCLK_HDMI_TX_BCLK, "hdmi_tx_bclk", 0,
+		    JH7110_VOUTCLK_I2STX0_BCLK),
+	JH71X0_GATE(JH7110_VOUTCLK_HDMI_TX_SYS, "hdmi_tx_sys", 0, JH7110_VOUTCLK_APB),
+};
+
+static int jh7110_vout_top_rst_init(struct jh71x0_clk_priv *priv)
+{
+	struct reset_control *top_rst;
+
+	/* The reset should be shared and other Vout modules will use its. */
+	top_rst = devm_reset_control_get_shared(priv->dev, NULL);
+	if (IS_ERR(top_rst))
+		return dev_err_probe(priv->dev, PTR_ERR(top_rst), "failed to get top reset\n");
+
+	return reset_control_deassert(top_rst);
+}
+
+static struct clk_hw *jh7110_voutclk_get(struct of_phandle_args *clkspec, void *data)
+{
+	struct jh71x0_clk_priv *priv = data;
+	unsigned int idx = clkspec->args[0];
+
+	if (idx < JH7110_VOUTCLK_END)
+		return &priv->reg[idx].hw;
+
+	return ERR_PTR(-EINVAL);
+}
+
+#ifdef CONFIG_PM
+static int jh7110_voutcrg_suspend(struct device *dev)
+{
+	struct top_sysclk *top = dev_get_drvdata(dev);
+
+	clk_bulk_disable_unprepare(top->top_clks_num, top->top_clks);
+
+	return 0;
+}
+
+static int jh7110_voutcrg_resume(struct device *dev)
+{
+	struct top_sysclk *top = dev_get_drvdata(dev);
+
+	return clk_bulk_prepare_enable(top->top_clks_num, top->top_clks);
+}
+#endif
+
+static const struct dev_pm_ops jh7110_voutcrg_pm_ops = {
+	SET_RUNTIME_PM_OPS(jh7110_voutcrg_suspend, jh7110_voutcrg_resume, NULL)
+};
+
+static int jh7110_voutcrg_probe(struct platform_device *pdev)
+{
+	struct jh71x0_clk_priv *priv;
+	struct top_sysclk *top;
+	unsigned int idx;
+	int ret;
+
+	priv = devm_kzalloc(&pdev->dev,
+			    struct_size(priv, reg, JH7110_VOUTCLK_END),
+			    GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	top = devm_kzalloc(&pdev->dev, sizeof(*top), GFP_KERNEL);
+	if (!top)
+		return -ENOMEM;
+
+	spin_lock_init(&priv->rmw_lock);
+	priv->dev = &pdev->dev;
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	top->top_clks = jh7110_vout_top_clks;
+	top->top_clks_num = ARRAY_SIZE(jh7110_vout_top_clks);
+	ret = devm_clk_bulk_get(priv->dev, top->top_clks_num, top->top_clks);
+	if (ret)
+		return dev_err_probe(priv->dev, ret, "failed to get top clocks\n");
+	dev_set_drvdata(priv->dev, top);
+
+	/* enable power domain and clocks */
+	pm_runtime_enable(priv->dev);
+	ret = pm_runtime_get_sync(priv->dev);
+	if (ret < 0)
+		return dev_err_probe(priv->dev, ret, "failed to turn on power\n");
+
+	ret = jh7110_vout_top_rst_init(priv);
+	if (ret)
+		goto err_exit;
+
+	for (idx = 0; idx < JH7110_VOUTCLK_END; idx++) {
+		u32 max = jh7110_voutclk_data[idx].max;
+		struct clk_parent_data parents[4] = {};
+		struct clk_init_data init = {
+			.name = jh7110_voutclk_data[idx].name,
+			.ops = starfive_jh71x0_clk_ops(max),
+			.parent_data = parents,
+			.num_parents =
+				((max & JH71X0_CLK_MUX_MASK) >> JH71X0_CLK_MUX_SHIFT) + 1,
+			.flags = jh7110_voutclk_data[idx].flags,
+		};
+		struct jh71x0_clk *clk = &priv->reg[idx];
+		unsigned int i;
+		const char *fw_name[JH7110_VOUTCLK_EXT_END - JH7110_VOUTCLK_END] = {
+			"vout_src",
+			"vout_top_ahb",
+			"vout_top_axi",
+			"vout_top_hdmitx0_mclk",
+			"i2stx0_bclk",
+			"hdmitx0_pixelclk"
+		};
+
+		for (i = 0; i < init.num_parents; i++) {
+			unsigned int pidx = jh7110_voutclk_data[idx].parents[i];
+
+			if (pidx < JH7110_VOUTCLK_END)
+				parents[i].hw = &priv->reg[pidx].hw;
+			else if (pidx < JH7110_VOUTCLK_EXT_END)
+				parents[i].fw_name = fw_name[pidx - JH7110_VOUTCLK_END];
+		}
+
+		clk->hw.init = &init;
+		clk->idx = idx;
+		clk->max_div = max & JH71X0_CLK_DIV_MASK;
+
+		ret = devm_clk_hw_register(&pdev->dev, &clk->hw);
+		if (ret)
+			goto err_exit;
+	}
+
+	ret = devm_of_clk_add_hw_provider(&pdev->dev, jh7110_voutclk_get, priv);
+	if (ret)
+		goto err_exit;
+
+	ret = jh7110_reset_controller_register(priv, "rst-vout", 4);
+	if (ret)
+		goto err_exit;
+
+	return 0;
+
+err_exit:
+	pm_runtime_put_sync(priv->dev);
+	pm_runtime_disable(priv->dev);
+	return ret;
+}
+
+static int jh7110_voutcrg_remove(struct platform_device *pdev)
+{
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+static const struct of_device_id jh7110_voutcrg_match[] = {
+	{ .compatible = "starfive,jh7110-voutcrg" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, jh7110_voutcrg_match);
+
+static struct platform_driver jh7110_voutcrg_driver = {
+	.probe = jh7110_voutcrg_probe,
+	.remove = jh7110_voutcrg_remove,
+	.driver = {
+		.name = "clk-starfive-jh7110-vout",
+		.of_match_table = jh7110_voutcrg_match,
+		.pm = &jh7110_voutcrg_pm_ops,
+	},
+};
+module_platform_driver(jh7110_voutcrg_driver);
+
+MODULE_AUTHOR("Xingyu Wu <xingyu.wu@starfivetech.com>");
+MODULE_DESCRIPTION("StarFive JH7110 Video-Output clock driver");
+MODULE_LICENSE("GPL");