diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
deleted file mode 100644
index 85a496ddc619..000000000000
--- a/arch/arm/mach-ep93xx/clock.c
+++ /dev/null
@@ -1,733 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/clock.c
- * Clock control for Cirrus EP93xx chips.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- */
-
-#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <linux/clkdev.h>
-#include <linux/clk-provider.h>
-#include <linux/soc/cirrus/ep93xx.h>
-
-#include "hardware.h"
-
-#include <asm/div64.h>
-
-#include "soc.h"
-
-static DEFINE_SPINLOCK(clk_lock);
-
-static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 };
-static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 };
-static char pclk_divisors[] = { 1, 2, 4, 8 };
-
-static char adc_divisors[] = { 16, 4 };
-static char sclk_divisors[] = { 2, 4 };
-static char lrclk_divisors[] = { 32, 64, 128 };
-
-static const char * const mux_parents[] = {
-	"xtali",
-	"pll1",
-	"pll2"
-};
-
-/*
- * PLL rate = 14.7456 MHz * (X1FBD + 1) * (X2FBD + 1) / (X2IPD + 1) / 2^PS
- */
-static unsigned long calc_pll_rate(unsigned long long rate, u32 config_word)
-{
-	int i;
-
-	rate *= ((config_word >> 11) & 0x1f) + 1;		/* X1FBD */
-	rate *= ((config_word >> 5) & 0x3f) + 1;		/* X2FBD */
-	do_div(rate, (config_word & 0x1f) + 1);			/* X2IPD */
-	for (i = 0; i < ((config_word >> 16) & 3); i++)		/* PS */
-		rate >>= 1;
-
-	return (unsigned long)rate;
-}
-
-struct clk_psc {
-	struct clk_hw hw;
-	void __iomem *reg;
-	u8 bit_idx;
-	u32 mask;
-	u8 shift;
-	u8 width;
-	char *div;
-	u8 num_div;
-	spinlock_t *lock;
-};
-
-#define to_clk_psc(_hw) container_of(_hw, struct clk_psc, hw)
-
-static int ep93xx_clk_is_enabled(struct clk_hw *hw)
-{
-	struct clk_psc *psc = to_clk_psc(hw);
-	u32 val = readl(psc->reg);
-
-	return (val & BIT(psc->bit_idx)) ? 1 : 0;
-}
-
-static int ep93xx_clk_enable(struct clk_hw *hw)
-{
-	struct clk_psc *psc = to_clk_psc(hw);
-	unsigned long flags = 0;
-	u32 val;
-
-	if (psc->lock)
-		spin_lock_irqsave(psc->lock, flags);
-
-	val = __raw_readl(psc->reg);
-	val |= BIT(psc->bit_idx);
-
-	ep93xx_syscon_swlocked_write(val, psc->reg);
-
-	if (psc->lock)
-		spin_unlock_irqrestore(psc->lock, flags);
-
-	return 0;
-}
-
-static void ep93xx_clk_disable(struct clk_hw *hw)
-{
-	struct clk_psc *psc = to_clk_psc(hw);
-	unsigned long flags = 0;
-	u32 val;
-
-	if (psc->lock)
-		spin_lock_irqsave(psc->lock, flags);
-
-	val = __raw_readl(psc->reg);
-	val &= ~BIT(psc->bit_idx);
-
-	ep93xx_syscon_swlocked_write(val, psc->reg);
-
-	if (psc->lock)
-		spin_unlock_irqrestore(psc->lock, flags);
-}
-
-static const struct clk_ops clk_ep93xx_gate_ops = {
-	.enable = ep93xx_clk_enable,
-	.disable = ep93xx_clk_disable,
-	.is_enabled = ep93xx_clk_is_enabled,
-};
-
-static struct clk_hw *ep93xx_clk_register_gate(const char *name,
-				    const char *parent_name,
-				    void __iomem *reg,
-				    u8 bit_idx)
-{
-	struct clk_init_data init;
-	struct clk_psc *psc;
-	struct clk *clk;
-
-	psc = kzalloc(sizeof(*psc), GFP_KERNEL);
-	if (!psc)
-		return ERR_PTR(-ENOMEM);
-
-	init.name = name;
-	init.ops = &clk_ep93xx_gate_ops;
-	init.flags = CLK_SET_RATE_PARENT;
-	init.parent_names = (parent_name ? &parent_name : NULL);
-	init.num_parents = (parent_name ? 1 : 0);
-
-	psc->reg = reg;
-	psc->bit_idx = bit_idx;
-	psc->hw.init = &init;
-	psc->lock = &clk_lock;
-
-	clk = clk_register(NULL, &psc->hw);
-	if (IS_ERR(clk)) {
-		kfree(psc);
-		return ERR_CAST(clk);
-	}
-
-	return &psc->hw;
-}
-
-static u8 ep93xx_mux_get_parent(struct clk_hw *hw)
-{
-	struct clk_psc *psc = to_clk_psc(hw);
-	u32 val = __raw_readl(psc->reg);
-
-	if (!(val & EP93XX_SYSCON_CLKDIV_ESEL))
-		return 0;
-
-	if (!(val & EP93XX_SYSCON_CLKDIV_PSEL))
-		return 1;
-
-	return 2;
-}
-
-static int ep93xx_mux_set_parent_lock(struct clk_hw *hw, u8 index)
-{
-	struct clk_psc *psc = to_clk_psc(hw);
-	unsigned long flags = 0;
-	u32 val;
-
-	if (index >= ARRAY_SIZE(mux_parents))
-		return -EINVAL;
-
-	if (psc->lock)
-		spin_lock_irqsave(psc->lock, flags);
-
-	val = __raw_readl(psc->reg);
-	val &= ~(EP93XX_SYSCON_CLKDIV_ESEL | EP93XX_SYSCON_CLKDIV_PSEL);
-
-
-	if (index != 0) {
-		val |= EP93XX_SYSCON_CLKDIV_ESEL;
-		val |= (index - 1) ? EP93XX_SYSCON_CLKDIV_PSEL : 0;
-	}
-
-	ep93xx_syscon_swlocked_write(val, psc->reg);
-
-	if (psc->lock)
-		spin_unlock_irqrestore(psc->lock, flags);
-
-	return 0;
-}
-
-static bool is_best(unsigned long rate, unsigned long now,
-		     unsigned long best)
-{
-	return abs(rate - now) < abs(rate - best);
-}
-
-static int ep93xx_mux_determine_rate(struct clk_hw *hw,
-				struct clk_rate_request *req)
-{
-	unsigned long rate = req->rate;
-	struct clk *best_parent = NULL;
-	unsigned long __parent_rate;
-	unsigned long best_rate = 0, actual_rate, mclk_rate;
-	unsigned long best_parent_rate;
-	int __div = 0, __pdiv = 0;
-	int i;
-
-	/*
-	 * Try the two pll's and the external clock
-	 * Because the valid predividers are 2, 2.5 and 3, we multiply
-	 * all the clocks by 2 to avoid floating point math.
-	 *
-	 * This is based on the algorithm in the ep93xx raster guide:
-	 * http://be-a-maverick.com/en/pubs/appNote/AN269REV1.pdf
-	 *
-	 */
-	for (i = 0; i < ARRAY_SIZE(mux_parents); i++) {
-		struct clk *parent = clk_get_sys(mux_parents[i], NULL);
-
-		__parent_rate = clk_get_rate(parent);
-		mclk_rate = __parent_rate * 2;
-
-		/* Try each predivider value */
-		for (__pdiv = 4; __pdiv <= 6; __pdiv++) {
-			__div = mclk_rate / (rate * __pdiv);
-			if (__div < 2 || __div > 127)
-				continue;
-
-			actual_rate = mclk_rate / (__pdiv * __div);
-			if (is_best(rate, actual_rate, best_rate)) {
-				best_rate = actual_rate;
-				best_parent_rate = __parent_rate;
-				best_parent = parent;
-			}
-		}
-	}
-
-	if (!best_parent)
-		return -EINVAL;
-
-	req->best_parent_rate = best_parent_rate;
-	req->best_parent_hw = __clk_get_hw(best_parent);
-	req->rate = best_rate;
-
-	return 0;
-}
-
-static unsigned long ep93xx_ddiv_recalc_rate(struct clk_hw *hw,
-						unsigned long parent_rate)
-{
-	struct clk_psc *psc = to_clk_psc(hw);
-	unsigned long rate = 0;
-	u32 val = __raw_readl(psc->reg);
-	int __pdiv = ((val >> EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) & 0x03);
-	int __div = val & 0x7f;
-
-	if (__div > 0)
-		rate = (parent_rate * 2) / ((__pdiv + 3) * __div);
-
-	return rate;
-}
-
-static int ep93xx_ddiv_set_rate(struct clk_hw *hw, unsigned long rate,
-				unsigned long parent_rate)
-{
-	struct clk_psc *psc = to_clk_psc(hw);
-	int pdiv = 0, div = 0;
-	unsigned long best_rate = 0, actual_rate, mclk_rate;
-	int __div = 0, __pdiv = 0;
-	u32 val;
-
-	mclk_rate = parent_rate * 2;
-
-	for (__pdiv = 4; __pdiv <= 6; __pdiv++) {
-		__div = mclk_rate / (rate * __pdiv);
-		if (__div < 2 || __div > 127)
-			continue;
-
-		actual_rate = mclk_rate / (__pdiv * __div);
-		if (is_best(rate, actual_rate, best_rate)) {
-			pdiv = __pdiv - 3;
-			div = __div;
-			best_rate = actual_rate;
-		}
-	}
-
-	if (!best_rate)
-		return -EINVAL;
-
-	val = __raw_readl(psc->reg);
-
-	/* Clear old dividers */
-	val &= ~0x37f;
-
-	/* Set the new pdiv and div bits for the new clock rate */
-	val |= (pdiv << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | div;
-	ep93xx_syscon_swlocked_write(val, psc->reg);
-
-	return 0;
-}
-
-static const struct clk_ops clk_ddiv_ops = {
-	.enable = ep93xx_clk_enable,
-	.disable = ep93xx_clk_disable,
-	.is_enabled = ep93xx_clk_is_enabled,
-	.get_parent = ep93xx_mux_get_parent,
-	.set_parent = ep93xx_mux_set_parent_lock,
-	.determine_rate = ep93xx_mux_determine_rate,
-	.recalc_rate = ep93xx_ddiv_recalc_rate,
-	.set_rate = ep93xx_ddiv_set_rate,
-};
-
-static struct clk_hw *clk_hw_register_ddiv(const char *name,
-					  void __iomem *reg,
-					  u8 bit_idx)
-{
-	struct clk_init_data init;
-	struct clk_psc *psc;
-	struct clk *clk;
-
-	psc = kzalloc(sizeof(*psc), GFP_KERNEL);
-	if (!psc)
-		return ERR_PTR(-ENOMEM);
-
-	init.name = name;
-	init.ops = &clk_ddiv_ops;
-	init.flags = 0;
-	init.parent_names = mux_parents;
-	init.num_parents = ARRAY_SIZE(mux_parents);
-
-	psc->reg = reg;
-	psc->bit_idx = bit_idx;
-	psc->lock = &clk_lock;
-	psc->hw.init = &init;
-
-	clk = clk_register(NULL, &psc->hw);
-	if (IS_ERR(clk)) {
-		kfree(psc);
-		return ERR_CAST(clk);
-	}
-	return &psc->hw;
-}
-
-static unsigned long ep93xx_div_recalc_rate(struct clk_hw *hw,
-					    unsigned long parent_rate)
-{
-	struct clk_psc *psc = to_clk_psc(hw);
-	u32 val = __raw_readl(psc->reg);
-	u8 index = (val & psc->mask) >> psc->shift;
-
-	if (index > psc->num_div)
-		return 0;
-
-	return DIV_ROUND_UP_ULL(parent_rate, psc->div[index]);
-}
-
-static long ep93xx_div_round_rate(struct clk_hw *hw, unsigned long rate,
-				   unsigned long *parent_rate)
-{
-	struct clk_psc *psc = to_clk_psc(hw);
-	unsigned long best = 0, now, maxdiv;
-	int i;
-
-	maxdiv = psc->div[psc->num_div - 1];
-
-	for (i = 0; i < psc->num_div; i++) {
-		if ((rate * psc->div[i]) == *parent_rate)
-			return DIV_ROUND_UP_ULL((u64)*parent_rate, psc->div[i]);
-
-		now = DIV_ROUND_UP_ULL((u64)*parent_rate, psc->div[i]);
-
-		if (is_best(rate, now, best))
-			best = now;
-	}
-
-	if (!best)
-		best = DIV_ROUND_UP_ULL(*parent_rate, maxdiv);
-
-	return best;
-}
-
-static int ep93xx_div_set_rate(struct clk_hw *hw, unsigned long rate,
-			       unsigned long parent_rate)
-{
-	struct clk_psc *psc = to_clk_psc(hw);
-	u32 val = __raw_readl(psc->reg) & ~psc->mask;
-	int i;
-
-	for (i = 0; i < psc->num_div; i++)
-		if (rate == parent_rate / psc->div[i]) {
-			val |= i << psc->shift;
-			break;
-		}
-
-	if (i == psc->num_div)
-		return -EINVAL;
-
-	ep93xx_syscon_swlocked_write(val, psc->reg);
-
-	return 0;
-}
-
-static const struct clk_ops ep93xx_div_ops = {
-	.enable = ep93xx_clk_enable,
-	.disable = ep93xx_clk_disable,
-	.is_enabled = ep93xx_clk_is_enabled,
-	.recalc_rate = ep93xx_div_recalc_rate,
-	.round_rate = ep93xx_div_round_rate,
-	.set_rate = ep93xx_div_set_rate,
-};
-
-static struct clk_hw *clk_hw_register_div(const char *name,
-					  const char *parent_name,
-					  void __iomem *reg,
-					  u8 enable_bit,
-					  u8 shift,
-					  u8 width,
-					  char *clk_divisors,
-					  u8 num_div)
-{
-	struct clk_init_data init;
-	struct clk_psc *psc;
-	struct clk *clk;
-
-	psc = kzalloc(sizeof(*psc), GFP_KERNEL);
-	if (!psc)
-		return ERR_PTR(-ENOMEM);
-
-	init.name = name;
-	init.ops = &ep93xx_div_ops;
-	init.flags = 0;
-	init.parent_names = (parent_name ? &parent_name : NULL);
-	init.num_parents = 1;
-
-	psc->reg = reg;
-	psc->bit_idx = enable_bit;
-	psc->mask = GENMASK(shift + width - 1, shift);
-	psc->shift = shift;
-	psc->div = clk_divisors;
-	psc->num_div = num_div;
-	psc->lock = &clk_lock;
-	psc->hw.init = &init;
-
-	clk = clk_register(NULL, &psc->hw);
-	if (IS_ERR(clk)) {
-		kfree(psc);
-		return ERR_CAST(clk);
-	}
-	return &psc->hw;
-}
-
-struct ep93xx_gate {
-	unsigned int bit;
-	const char *dev_id;
-	const char *con_id;
-};
-
-static struct ep93xx_gate ep93xx_uarts[] = {
-	{EP93XX_SYSCON_DEVCFG_U1EN, "apb:uart1", NULL},
-	{EP93XX_SYSCON_DEVCFG_U2EN, "apb:uart2", NULL},
-	{EP93XX_SYSCON_DEVCFG_U3EN, "apb:uart3", NULL},
-};
-
-static void __init ep93xx_uart_clock_init(void)
-{
-	unsigned int i;
-	struct clk_hw *hw;
-	u32 value;
-	unsigned int clk_uart_div;
-
-	value = __raw_readl(EP93XX_SYSCON_PWRCNT);
-	if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD)
-		clk_uart_div = 1;
-	else
-		clk_uart_div = 2;
-
-	hw = clk_hw_register_fixed_factor(NULL, "uart", "xtali", 0, 1, clk_uart_div);
-
-	/* parenting uart gate clocks to uart clock */
-	for (i = 0; i < ARRAY_SIZE(ep93xx_uarts); i++) {
-		hw = ep93xx_clk_register_gate(ep93xx_uarts[i].dev_id,
-					"uart",
-					EP93XX_SYSCON_DEVCFG,
-					ep93xx_uarts[i].bit);
-
-		clk_hw_register_clkdev(hw, NULL, ep93xx_uarts[i].dev_id);
-	}
-}
-
-static struct ep93xx_gate ep93xx_dmas[] = {
-	{EP93XX_SYSCON_PWRCNT_DMA_M2P0, NULL, "m2p0"},
-	{EP93XX_SYSCON_PWRCNT_DMA_M2P1, NULL, "m2p1"},
-	{EP93XX_SYSCON_PWRCNT_DMA_M2P2, NULL, "m2p2"},
-	{EP93XX_SYSCON_PWRCNT_DMA_M2P3, NULL, "m2p3"},
-	{EP93XX_SYSCON_PWRCNT_DMA_M2P4, NULL, "m2p4"},
-	{EP93XX_SYSCON_PWRCNT_DMA_M2P5, NULL, "m2p5"},
-	{EP93XX_SYSCON_PWRCNT_DMA_M2P6, NULL, "m2p6"},
-	{EP93XX_SYSCON_PWRCNT_DMA_M2P7, NULL, "m2p7"},
-	{EP93XX_SYSCON_PWRCNT_DMA_M2P8, NULL, "m2p8"},
-	{EP93XX_SYSCON_PWRCNT_DMA_M2P9, NULL, "m2p9"},
-	{EP93XX_SYSCON_PWRCNT_DMA_M2M0, NULL, "m2m0"},
-	{EP93XX_SYSCON_PWRCNT_DMA_M2M1, NULL, "m2m1"},
-};
-
-static void __init ep93xx_dma_clock_init(void)
-{
-	unsigned int i;
-	struct clk_hw *hw;
-	int ret;
-
-	for (i = 0; i < ARRAY_SIZE(ep93xx_dmas); i++) {
-		hw = clk_hw_register_gate(NULL, ep93xx_dmas[i].con_id,
-					"hclk", 0,
-					EP93XX_SYSCON_PWRCNT,
-					ep93xx_dmas[i].bit,
-					0,
-					&clk_lock);
-
-		ret = clk_hw_register_clkdev(hw, ep93xx_dmas[i].con_id, NULL);
-		if (ret)
-			pr_err("%s: failed to register lookup %s\n",
-			       __func__, ep93xx_dmas[i].con_id);
-	}
-}
-
-static int __init ep93xx_clock_init(void)
-{
-	u32 value;
-	struct clk_hw *hw;
-	unsigned long clk_pll1_rate;
-	unsigned long clk_f_rate;
-	unsigned long clk_h_rate;
-	unsigned long clk_p_rate;
-	unsigned long clk_pll2_rate;
-	unsigned int clk_f_div;
-	unsigned int clk_h_div;
-	unsigned int clk_p_div;
-	unsigned int clk_usb_div;
-	unsigned long clk_spi_div;
-
-	hw = clk_hw_register_fixed_rate(NULL, "xtali", NULL, 0, EP93XX_EXT_CLK_RATE);
-	clk_hw_register_clkdev(hw, NULL, "xtali");
-
-	/* Determine the bootloader configured pll1 rate */
-	value = __raw_readl(EP93XX_SYSCON_CLKSET1);
-	if (!(value & EP93XX_SYSCON_CLKSET1_NBYP1))
-		clk_pll1_rate = EP93XX_EXT_CLK_RATE;
-	else
-		clk_pll1_rate = calc_pll_rate(EP93XX_EXT_CLK_RATE, value);
-
-	hw = clk_hw_register_fixed_rate(NULL, "pll1", "xtali", 0, clk_pll1_rate);
-	clk_hw_register_clkdev(hw, NULL, "pll1");
-
-	/* Initialize the pll1 derived clocks */
-	clk_f_div = fclk_divisors[(value >> 25) & 0x7];
-	clk_h_div = hclk_divisors[(value >> 20) & 0x7];
-	clk_p_div = pclk_divisors[(value >> 18) & 0x3];
-
-	hw = clk_hw_register_fixed_factor(NULL, "fclk", "pll1", 0, 1, clk_f_div);
-	clk_f_rate = clk_get_rate(hw->clk);
-	hw = clk_hw_register_fixed_factor(NULL, "hclk", "pll1", 0, 1, clk_h_div);
-	clk_h_rate = clk_get_rate(hw->clk);
-	hw = clk_hw_register_fixed_factor(NULL, "pclk", "hclk", 0, 1, clk_p_div);
-	clk_p_rate = clk_get_rate(hw->clk);
-
-	clk_hw_register_clkdev(hw, "apb_pclk", NULL);
-
-	ep93xx_dma_clock_init();
-
-	/* Determine the bootloader configured pll2 rate */
-	value = __raw_readl(EP93XX_SYSCON_CLKSET2);
-	if (!(value & EP93XX_SYSCON_CLKSET2_NBYP2))
-		clk_pll2_rate = EP93XX_EXT_CLK_RATE;
-	else if (value & EP93XX_SYSCON_CLKSET2_PLL2_EN)
-		clk_pll2_rate = calc_pll_rate(EP93XX_EXT_CLK_RATE, value);
-	else
-		clk_pll2_rate = 0;
-
-	hw = clk_hw_register_fixed_rate(NULL, "pll2", "xtali", 0, clk_pll2_rate);
-	clk_hw_register_clkdev(hw, NULL, "pll2");
-
-	/* Initialize the pll2 derived clocks */
-	/*
-	 * These four bits set the divide ratio between the PLL2
-	 * output and the USB clock.
-	 * 0000 - Divide by 1
-	 * 0001 - Divide by 2
-	 * 0010 - Divide by 3
-	 * 0011 - Divide by 4
-	 * 0100 - Divide by 5
-	 * 0101 - Divide by 6
-	 * 0110 - Divide by 7
-	 * 0111 - Divide by 8
-	 * 1000 - Divide by 9
-	 * 1001 - Divide by 10
-	 * 1010 - Divide by 11
-	 * 1011 - Divide by 12
-	 * 1100 - Divide by 13
-	 * 1101 - Divide by 14
-	 * 1110 - Divide by 15
-	 * 1111 - Divide by 1
-	 * On power-on-reset these bits are reset to 0000b.
-	 */
-	clk_usb_div = (((value >> 28) & 0xf) + 1);
-	hw = clk_hw_register_fixed_factor(NULL, "usb_clk", "pll2", 0, 1, clk_usb_div);
-	hw = clk_hw_register_gate(NULL, "ohci-platform",
-				"usb_clk", 0,
-				EP93XX_SYSCON_PWRCNT,
-				EP93XX_SYSCON_PWRCNT_USH_EN,
-				0,
-				&clk_lock);
-	clk_hw_register_clkdev(hw, NULL, "ohci-platform");
-
-	/*
-	 * EP93xx SSP clock rate was doubled in version E2. For more information
-	 * see:
-	 *     http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
-	 */
-	clk_spi_div = 1;
-	if (ep93xx_chip_revision() < EP93XX_CHIP_REV_E2)
-		clk_spi_div = 2;
-	hw = clk_hw_register_fixed_factor(NULL, "ep93xx-spi.0", "xtali", 0, 1, clk_spi_div);
-	clk_hw_register_clkdev(hw, NULL, "ep93xx-spi.0");
-
-	/* pwm clock */
-	hw = clk_hw_register_fixed_factor(NULL, "pwm_clk", "xtali", 0, 1, 1);
-	clk_hw_register_clkdev(hw, "pwm_clk", NULL);
-
-	pr_info("PLL1 running at %ld MHz, PLL2 at %ld MHz\n",
-		clk_pll1_rate / 1000000, clk_pll2_rate / 1000000);
-	pr_info("FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
-		clk_f_rate / 1000000, clk_h_rate / 1000000,
-		clk_p_rate / 1000000);
-
-	ep93xx_uart_clock_init();
-
-	/* touchscreen/adc clock */
-	hw = clk_hw_register_div("ep93xx-adc",
-				"xtali",
-				EP93XX_SYSCON_KEYTCHCLKDIV,
-				EP93XX_SYSCON_KEYTCHCLKDIV_TSEN,
-				EP93XX_SYSCON_KEYTCHCLKDIV_ADIV,
-				1,
-				adc_divisors,
-				ARRAY_SIZE(adc_divisors));
-
-	clk_hw_register_clkdev(hw, NULL, "ep93xx-adc");
-
-	/* keypad clock */
-	hw = clk_hw_register_div("ep93xx-keypad",
-				"xtali",
-				EP93XX_SYSCON_KEYTCHCLKDIV,
-				EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
-				EP93XX_SYSCON_KEYTCHCLKDIV_KDIV,
-				1,
-				adc_divisors,
-				ARRAY_SIZE(adc_divisors));
-
-	clk_hw_register_clkdev(hw, NULL, "ep93xx-keypad");
-
-	/* On reset PDIV and VDIV is set to zero, while PDIV zero
-	 * means clock disable, VDIV shouldn't be zero.
-	 * So i set both dividers to minimum.
-	 */
-	/* ENA - Enable CLK divider. */
-	/* PDIV - 00 - Disable clock */
-	/* VDIV - at least 2 */
-	/* Check and enable video clk registers */
-	value = __raw_readl(EP93XX_SYSCON_VIDCLKDIV);
-	value |= (1 << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | 2;
-	ep93xx_syscon_swlocked_write(value, EP93XX_SYSCON_VIDCLKDIV);
-
-	/* check and enable i2s clk registers */
-	value = __raw_readl(EP93XX_SYSCON_I2SCLKDIV);
-	value |= (1 << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | 2;
-	ep93xx_syscon_swlocked_write(value, EP93XX_SYSCON_I2SCLKDIV);
-
-	/* video clk */
-	hw = clk_hw_register_ddiv("ep93xx-fb",
-				EP93XX_SYSCON_VIDCLKDIV,
-				EP93XX_SYSCON_CLKDIV_ENABLE);
-
-	clk_hw_register_clkdev(hw, NULL, "ep93xx-fb");
-
-	/* i2s clk */
-	hw = clk_hw_register_ddiv("mclk",
-				EP93XX_SYSCON_I2SCLKDIV,
-				EP93XX_SYSCON_CLKDIV_ENABLE);
-
-	clk_hw_register_clkdev(hw, "mclk", "ep93xx-i2s");
-
-	/* i2s sclk */
-#define EP93XX_I2SCLKDIV_SDIV_SHIFT	16
-#define EP93XX_I2SCLKDIV_SDIV_WIDTH	1
-	hw = clk_hw_register_div("sclk",
-				"mclk",
-				EP93XX_SYSCON_I2SCLKDIV,
-				EP93XX_SYSCON_I2SCLKDIV_SENA,
-				EP93XX_I2SCLKDIV_SDIV_SHIFT,
-				EP93XX_I2SCLKDIV_SDIV_WIDTH,
-				sclk_divisors,
-				ARRAY_SIZE(sclk_divisors));
-
-	clk_hw_register_clkdev(hw, "sclk", "ep93xx-i2s");
-
-	/* i2s lrclk */
-#define EP93XX_I2SCLKDIV_LRDIV32_SHIFT	17
-#define EP93XX_I2SCLKDIV_LRDIV32_WIDTH	3
-	hw = clk_hw_register_div("lrclk",
-				"sclk",
-				EP93XX_SYSCON_I2SCLKDIV,
-				EP93XX_SYSCON_I2SCLKDIV_SENA,
-				EP93XX_I2SCLKDIV_LRDIV32_SHIFT,
-				EP93XX_I2SCLKDIV_LRDIV32_WIDTH,
-				lrclk_divisors,
-				ARRAY_SIZE(lrclk_divisors));
-
-	clk_hw_register_clkdev(hw, "lrclk", "ep93xx-i2s");
-
-	return 0;
-}
-postcore_initcall(ep93xx_clock_init);
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
deleted file mode 100644
index d61c1d2a0843..000000000000
--- a/arch/arm/mach-ep93xx/core.c
+++ /dev/null
@@ -1,1114 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/core.c
- * Core routines for Cirrus EP93xx chips.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
- *
- * Thanks go to Michael Burian and Ray Lehtiniemi for their key
- * role in the ep93xx linux community.
- */
-
-#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-#include <linux/sys_soc.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/uaccess.h>
-#include <linux/termios.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/serial.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/gpio/machine.h>
-#include <linux/spi/spi.h>
-#include <linux/export.h>
-#include <linux/irqchip/arm-vic.h>
-#include <linux/reboot.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <linux/random.h>
-#include <linux/ioport.h>
-
-#include "hardware.h"
-#include <linux/platform_data/video-ep93xx.h>
-#include <linux/platform_data/keypad-ep93xx.h>
-#include <linux/platform_data/spi-ep93xx.h>
-#include <linux/soc/cirrus/ep93xx.h>
-
-#include "gpio-ep93xx.h"
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "soc.h"
-#include "irqs.h"
-
-/*************************************************************************
- * Static I/O mappings that are needed for all EP93xx platforms
- *************************************************************************/
-static struct map_desc ep93xx_io_desc[] __initdata = {
-	{
-		.virtual	= EP93XX_AHB_VIRT_BASE,
-		.pfn		= __phys_to_pfn(EP93XX_AHB_PHYS_BASE),
-		.length		= EP93XX_AHB_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= EP93XX_APB_VIRT_BASE,
-		.pfn		= __phys_to_pfn(EP93XX_APB_PHYS_BASE),
-		.length		= EP93XX_APB_SIZE,
-		.type		= MT_DEVICE,
-	},
-};
-
-void __init ep93xx_map_io(void)
-{
-	iotable_init(ep93xx_io_desc, ARRAY_SIZE(ep93xx_io_desc));
-}
-
-/*************************************************************************
- * EP93xx IRQ handling
- *************************************************************************/
-void __init ep93xx_init_irq(void)
-{
-	vic_init(EP93XX_VIC1_BASE, IRQ_EP93XX_VIC0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
-	vic_init(EP93XX_VIC2_BASE, IRQ_EP93XX_VIC1, EP93XX_VIC2_VALID_IRQ_MASK, 0);
-}
-
-
-/*************************************************************************
- * EP93xx System Controller Software Locked register handling
- *************************************************************************/
-
-/*
- * syscon_swlock prevents anything else from writing to the syscon
- * block while a software locked register is being written.
- */
-static DEFINE_SPINLOCK(syscon_swlock);
-
-void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&syscon_swlock, flags);
-
-	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-	__raw_writel(val, reg);
-
-	spin_unlock_irqrestore(&syscon_swlock, flags);
-}
-
-void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits)
-{
-	unsigned long flags;
-	unsigned int val;
-
-	spin_lock_irqsave(&syscon_swlock, flags);
-
-	val = __raw_readl(EP93XX_SYSCON_DEVCFG);
-	val &= ~clear_bits;
-	val |= set_bits;
-	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-	__raw_writel(val, EP93XX_SYSCON_DEVCFG);
-
-	spin_unlock_irqrestore(&syscon_swlock, flags);
-}
-
-/**
- * ep93xx_chip_revision() - returns the EP93xx chip revision
- *
- * See "platform.h" for more information.
- */
-unsigned int ep93xx_chip_revision(void)
-{
-	unsigned int v;
-
-	v = __raw_readl(EP93XX_SYSCON_SYSCFG);
-	v &= EP93XX_SYSCON_SYSCFG_REV_MASK;
-	v >>= EP93XX_SYSCON_SYSCFG_REV_SHIFT;
-	return v;
-}
-EXPORT_SYMBOL_GPL(ep93xx_chip_revision);
-
-/*************************************************************************
- * EP93xx GPIO
- *************************************************************************/
-/* port A */
-static struct resource ep93xx_a_gpio_resources[] = {
-	DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE,        0x04, "data"),
-	DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x10, 0x04, "dir"),
-	DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x90, 0x1c, "intr"),
-	DEFINE_RES_IRQ(IRQ_EP93XX_GPIO_AB),
-};
-
-static struct platform_device ep93xx_a_gpio = {
-	.name           = "gpio-ep93xx",
-	.id             = 0,
-	.num_resources = ARRAY_SIZE(ep93xx_a_gpio_resources),
-	.resource = ep93xx_a_gpio_resources,
-};
-
-/* port B */
-static struct resource ep93xx_b_gpio_resources[] = {
-	DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x04, 0x04, "data"),
-	DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x14, 0x04, "dir"),
-	DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0xac, 0x1c, "intr"),
-	DEFINE_RES_IRQ(IRQ_EP93XX_GPIO_AB),
-};
-
-static struct platform_device ep93xx_b_gpio = {
-	.name           = "gpio-ep93xx",
-	.id             = 1,
-	.num_resources = ARRAY_SIZE(ep93xx_b_gpio_resources),
-	.resource = ep93xx_b_gpio_resources,
-};
-
-/* port C */
-static struct resource ep93xx_c_gpio_resources[] = {
-	DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x08, 0x04, "data"),
-	DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x18, 0x04, "dir"),
-};
-
-static struct platform_device ep93xx_c_gpio = {
-	.name           = "gpio-ep93xx",
-	.id             = 2,
-	.num_resources = ARRAY_SIZE(ep93xx_c_gpio_resources),
-	.resource = ep93xx_c_gpio_resources,
-};
-
-/* port D */
-static struct resource ep93xx_d_gpio_resources[] = {
-	DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x0c, 0x04, "data"),
-	DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x1c, 0x04, "dir"),
-};
-
-static struct platform_device ep93xx_d_gpio = {
-	.name           = "gpio-ep93xx",
-	.id             = 3,
-	.num_resources = ARRAY_SIZE(ep93xx_d_gpio_resources),
-	.resource = ep93xx_d_gpio_resources,
-};
-
-/* port E */
-static struct resource ep93xx_e_gpio_resources[] = {
-	DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x20, 0x04, "data"),
-	DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x24, 0x04, "dir"),
-};
-
-static struct platform_device ep93xx_e_gpio = {
-	.name           = "gpio-ep93xx",
-	.id             = 4,
-	.num_resources = ARRAY_SIZE(ep93xx_e_gpio_resources),
-	.resource = ep93xx_e_gpio_resources,
-};
-
-/* port F */
-static struct resource ep93xx_f_gpio_resources[] = {
-	DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x30, 0x04, "data"),
-	DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x34, 0x04, "dir"),
-	DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x4c, 0x1c, "intr"),
-	DEFINE_RES_IRQ(IRQ_EP93XX_GPIO0MUX),
-	DEFINE_RES_IRQ(IRQ_EP93XX_GPIO1MUX),
-	DEFINE_RES_IRQ(IRQ_EP93XX_GPIO2MUX),
-	DEFINE_RES_IRQ(IRQ_EP93XX_GPIO3MUX),
-	DEFINE_RES_IRQ(IRQ_EP93XX_GPIO4MUX),
-	DEFINE_RES_IRQ(IRQ_EP93XX_GPIO5MUX),
-	DEFINE_RES_IRQ(IRQ_EP93XX_GPIO6MUX),
-	DEFINE_RES_IRQ(IRQ_EP93XX_GPIO7MUX),
-};
-
-static struct platform_device ep93xx_f_gpio = {
-	.name           = "gpio-ep93xx",
-	.id             = 5,
-	.num_resources = ARRAY_SIZE(ep93xx_f_gpio_resources),
-	.resource = ep93xx_f_gpio_resources,
-};
-
-/* port G */
-static struct resource ep93xx_g_gpio_resources[] = {
-	DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x38, 0x04, "data"),
-	DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x3c, 0x04, "dir"),
-};
-
-static struct platform_device ep93xx_g_gpio = {
-	.name           = "gpio-ep93xx",
-	.id             = 6,
-	.num_resources = ARRAY_SIZE(ep93xx_g_gpio_resources),
-	.resource = ep93xx_g_gpio_resources,
-};
-
-static struct platform_device *ep93xx_gpio_device[] __initdata = {
-	&ep93xx_a_gpio,
-	&ep93xx_b_gpio,
-	&ep93xx_c_gpio,
-	&ep93xx_d_gpio,
-	&ep93xx_e_gpio,
-	&ep93xx_f_gpio,
-	&ep93xx_g_gpio,
-};
-
-/*************************************************************************
- * EP93xx peripheral handling
- *************************************************************************/
-#define EP93XX_UART_MCR_OFFSET		(0x0100)
-
-static void ep93xx_uart_set_mctrl(struct amba_device *dev,
-				  void __iomem *base, unsigned int mctrl)
-{
-	unsigned int mcr;
-
-	mcr = 0;
-	if (mctrl & TIOCM_RTS)
-		mcr |= 2;
-	if (mctrl & TIOCM_DTR)
-		mcr |= 1;
-
-	__raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET);
-}
-
-static struct amba_pl010_data ep93xx_uart_data = {
-	.set_mctrl	= ep93xx_uart_set_mctrl,
-};
-
-static AMBA_APB_DEVICE(uart1, "apb:uart1", 0x00041010, EP93XX_UART1_PHYS_BASE,
-	{ IRQ_EP93XX_UART1 }, &ep93xx_uart_data);
-
-static AMBA_APB_DEVICE(uart2, "apb:uart2", 0x00041010, EP93XX_UART2_PHYS_BASE,
-	{ IRQ_EP93XX_UART2 }, NULL);
-
-static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE,
-	{ IRQ_EP93XX_UART3 }, &ep93xx_uart_data);
-
-static struct resource ep93xx_rtc_resource[] = {
-	DEFINE_RES_MEM(EP93XX_RTC_PHYS_BASE, 0x10c),
-};
-
-static struct platform_device ep93xx_rtc_device = {
-	.name		= "ep93xx-rtc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(ep93xx_rtc_resource),
-	.resource	= ep93xx_rtc_resource,
-};
-
-/*************************************************************************
- * EP93xx OHCI USB Host
- *************************************************************************/
-
-static struct clk *ep93xx_ohci_host_clock;
-
-static int ep93xx_ohci_power_on(struct platform_device *pdev)
-{
-	if (!ep93xx_ohci_host_clock) {
-		ep93xx_ohci_host_clock = devm_clk_get(&pdev->dev, NULL);
-		if (IS_ERR(ep93xx_ohci_host_clock))
-			return PTR_ERR(ep93xx_ohci_host_clock);
-	}
-
-	return clk_prepare_enable(ep93xx_ohci_host_clock);
-}
-
-static void ep93xx_ohci_power_off(struct platform_device *pdev)
-{
-	clk_disable(ep93xx_ohci_host_clock);
-}
-
-static struct usb_ohci_pdata ep93xx_ohci_pdata = {
-	.power_on	= ep93xx_ohci_power_on,
-	.power_off	= ep93xx_ohci_power_off,
-	.power_suspend	= ep93xx_ohci_power_off,
-};
-
-static struct resource ep93xx_ohci_resources[] = {
-	DEFINE_RES_MEM(EP93XX_USB_PHYS_BASE, 0x1000),
-	DEFINE_RES_IRQ(IRQ_EP93XX_USB),
-};
-
-static u64 ep93xx_ohci_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ep93xx_ohci_device = {
-	.name		= "ohci-platform",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(ep93xx_ohci_resources),
-	.resource	= ep93xx_ohci_resources,
-	.dev		= {
-		.dma_mask		= &ep93xx_ohci_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &ep93xx_ohci_pdata,
-	},
-};
-
-/*************************************************************************
- * EP93xx physmap'ed flash
- *************************************************************************/
-static struct physmap_flash_data ep93xx_flash_data;
-
-static struct resource ep93xx_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device ep93xx_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &ep93xx_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &ep93xx_flash_resource,
-};
-
-/**
- * ep93xx_register_flash() - Register the external flash device.
- * @width:	bank width in octets
- * @start:	resource start address
- * @size:	resource size
- */
-void __init ep93xx_register_flash(unsigned int width,
-				  resource_size_t start, resource_size_t size)
-{
-	ep93xx_flash_data.width		= width;
-
-	ep93xx_flash_resource.start	= start;
-	ep93xx_flash_resource.end	= start + size - 1;
-
-	platform_device_register(&ep93xx_flash);
-}
-
-
-/*************************************************************************
- * EP93xx ethernet peripheral handling
- *************************************************************************/
-static struct ep93xx_eth_data ep93xx_eth_data;
-
-static struct resource ep93xx_eth_resource[] = {
-	DEFINE_RES_MEM(EP93XX_ETHERNET_PHYS_BASE, 0x10000),
-	DEFINE_RES_IRQ(IRQ_EP93XX_ETHERNET),
-};
-
-static u64 ep93xx_eth_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ep93xx_eth_device = {
-	.name		= "ep93xx-eth",
-	.id		= -1,
-	.dev		= {
-		.platform_data		= &ep93xx_eth_data,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.dma_mask		= &ep93xx_eth_dma_mask,
-	},
-	.num_resources	= ARRAY_SIZE(ep93xx_eth_resource),
-	.resource	= ep93xx_eth_resource,
-};
-
-/**
- * ep93xx_register_eth - Register the built-in ethernet platform device.
- * @data:	platform specific ethernet configuration (__initdata)
- * @copy_addr:	flag indicating that the MAC address should be copied
- *		from the IndAd registers (as programmed by the bootloader)
- */
-void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
-{
-	if (copy_addr)
-		memcpy_fromio(data->dev_addr, EP93XX_ETHERNET_BASE + 0x50, 6);
-
-	ep93xx_eth_data = *data;
-	platform_device_register(&ep93xx_eth_device);
-}
-
-
-/*************************************************************************
- * EP93xx i2c peripheral handling
- *************************************************************************/
-
-/* All EP93xx devices use the same two GPIO pins for I2C bit-banging */
-static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = {
-	.dev_id		= "i2c-gpio.0",
-	.table		= {
-		/* Use local offsets on gpiochip/port "G" */
-		GPIO_LOOKUP_IDX("gpio-ep93xx.6", 1, NULL, 0,
-				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		GPIO_LOOKUP_IDX("gpio-ep93xx.6", 0, NULL, 1,
-				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-	},
-};
-
-static struct platform_device ep93xx_i2c_device = {
-	.name		= "i2c-gpio",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= NULL,
-	},
-};
-
-/**
- * ep93xx_register_i2c - Register the i2c platform device.
- * @devices:	platform specific i2c bus device information (__initdata)
- * @num:	the number of devices on the i2c bus
- */
-void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num)
-{
-	/*
-	 * FIXME: this just sets the two pins as non-opendrain, as no
-	 * platforms tries to do that anyway. Flag the applicable lines
-	 * as open drain in the GPIO_LOOKUP above and the driver or
-	 * gpiolib will handle open drain/open drain emulation as need
-	 * be. Right now i2c-gpio emulates open drain which is not
-	 * optimal.
-	 */
-	__raw_writel((0 << 1) | (0 << 0),
-		     EP93XX_GPIO_EEDRIVE);
-
-	i2c_register_board_info(0, devices, num);
-	gpiod_add_lookup_table(&ep93xx_i2c_gpiod_table);
-	platform_device_register(&ep93xx_i2c_device);
-}
-
-/*************************************************************************
- * EP93xx SPI peripheral handling
- *************************************************************************/
-static struct ep93xx_spi_info ep93xx_spi_master_data;
-
-static struct resource ep93xx_spi_resources[] = {
-	DEFINE_RES_MEM(EP93XX_SPI_PHYS_BASE, 0x18),
-	DEFINE_RES_IRQ(IRQ_EP93XX_SSP),
-};
-
-static u64 ep93xx_spi_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ep93xx_spi_device = {
-	.name		= "ep93xx-spi",
-	.id		= 0,
-	.dev		= {
-		.platform_data		= &ep93xx_spi_master_data,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.dma_mask		= &ep93xx_spi_dma_mask,
-	},
-	.num_resources	= ARRAY_SIZE(ep93xx_spi_resources),
-	.resource	= ep93xx_spi_resources,
-};
-
-/**
- * ep93xx_register_spi() - registers spi platform device
- * @info: ep93xx board specific spi master info (__initdata)
- * @devices: SPI devices to register (__initdata)
- * @num: number of SPI devices to register
- *
- * This function registers platform device for the EP93xx SPI controller and
- * also makes sure that SPI pins are muxed so that I2S is not using those pins.
- */
-void __init ep93xx_register_spi(struct ep93xx_spi_info *info,
-				struct spi_board_info *devices, int num)
-{
-	/*
-	 * When SPI is used, we need to make sure that I2S is muxed off from
-	 * SPI pins.
-	 */
-	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONSSP);
-
-	ep93xx_spi_master_data = *info;
-	spi_register_board_info(devices, num);
-	platform_device_register(&ep93xx_spi_device);
-}
-
-/*************************************************************************
- * EP93xx LEDs
- *************************************************************************/
-static const struct gpio_led ep93xx_led_pins[] __initconst = {
-	{
-		.name	= "platform:grled",
-	}, {
-		.name	= "platform:rdled",
-	},
-};
-
-static const struct gpio_led_platform_data ep93xx_led_data __initconst = {
-	.num_leds	= ARRAY_SIZE(ep93xx_led_pins),
-	.leds		= ep93xx_led_pins,
-};
-
-static struct gpiod_lookup_table ep93xx_leds_gpio_table = {
-	.dev_id = "leds-gpio",
-	.table = {
-		/* Use local offsets on gpiochip/port "E" */
-		GPIO_LOOKUP_IDX("gpio-ep93xx.4", 0, NULL, 0, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("gpio-ep93xx.4", 1,	NULL, 1, GPIO_ACTIVE_HIGH),
-		{ }
-	},
-};
-
-/*************************************************************************
- * EP93xx pwm peripheral handling
- *************************************************************************/
-static struct resource ep93xx_pwm0_resource[] = {
-	DEFINE_RES_MEM(EP93XX_PWM_PHYS_BASE, 0x10),
-};
-
-static struct platform_device ep93xx_pwm0_device = {
-	.name		= "ep93xx-pwm",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(ep93xx_pwm0_resource),
-	.resource	= ep93xx_pwm0_resource,
-};
-
-static struct resource ep93xx_pwm1_resource[] = {
-	DEFINE_RES_MEM(EP93XX_PWM_PHYS_BASE + 0x20, 0x10),
-};
-
-static struct platform_device ep93xx_pwm1_device = {
-	.name		= "ep93xx-pwm",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(ep93xx_pwm1_resource),
-	.resource	= ep93xx_pwm1_resource,
-};
-
-void __init ep93xx_register_pwm(int pwm0, int pwm1)
-{
-	if (pwm0)
-		platform_device_register(&ep93xx_pwm0_device);
-
-	/* NOTE: EP9307 does not have PWMOUT1 (pin EGPIO14) */
-	if (pwm1)
-		platform_device_register(&ep93xx_pwm1_device);
-}
-
-int ep93xx_pwm_acquire_gpio(struct platform_device *pdev)
-{
-	int err;
-
-	if (pdev->id == 0) {
-		err = 0;
-	} else if (pdev->id == 1) {
-		err = gpio_request(EP93XX_GPIO_LINE_EGPIO14,
-				   dev_name(&pdev->dev));
-		if (err)
-			return err;
-		err = gpio_direction_output(EP93XX_GPIO_LINE_EGPIO14, 0);
-		if (err)
-			goto fail;
-
-		/* PWM 1 output on EGPIO[14] */
-		ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_PONG);
-	} else {
-		err = -ENODEV;
-	}
-
-	return err;
-
-fail:
-	gpio_free(EP93XX_GPIO_LINE_EGPIO14);
-	return err;
-}
-EXPORT_SYMBOL(ep93xx_pwm_acquire_gpio);
-
-void ep93xx_pwm_release_gpio(struct platform_device *pdev)
-{
-	if (pdev->id == 1) {
-		gpio_direction_input(EP93XX_GPIO_LINE_EGPIO14);
-		gpio_free(EP93XX_GPIO_LINE_EGPIO14);
-
-		/* EGPIO[14] used for GPIO */
-		ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_PONG);
-	}
-}
-EXPORT_SYMBOL(ep93xx_pwm_release_gpio);
-
-
-/*************************************************************************
- * EP93xx video peripheral handling
- *************************************************************************/
-static struct ep93xxfb_mach_info ep93xxfb_data;
-
-static struct resource ep93xx_fb_resource[] = {
-	DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE, 0x800),
-};
-
-static struct platform_device ep93xx_fb_device = {
-	.name			= "ep93xx-fb",
-	.id			= -1,
-	.dev			= {
-		.platform_data		= &ep93xxfb_data,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.dma_mask		= &ep93xx_fb_device.dev.coherent_dma_mask,
-	},
-	.num_resources		= ARRAY_SIZE(ep93xx_fb_resource),
-	.resource		= ep93xx_fb_resource,
-};
-
-/* The backlight use a single register in the framebuffer's register space */
-#define EP93XX_RASTER_REG_BRIGHTNESS 0x20
-
-static struct resource ep93xx_bl_resources[] = {
-	DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE +
-		       EP93XX_RASTER_REG_BRIGHTNESS, 0x04),
-};
-
-static struct platform_device ep93xx_bl_device = {
-	.name		= "ep93xx-bl",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(ep93xx_bl_resources),
-	.resource	= ep93xx_bl_resources,
-};
-
-/**
- * ep93xx_register_fb - Register the framebuffer platform device.
- * @data:	platform specific framebuffer configuration (__initdata)
- */
-void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
-{
-	ep93xxfb_data = *data;
-	platform_device_register(&ep93xx_fb_device);
-	platform_device_register(&ep93xx_bl_device);
-}
-
-
-/*************************************************************************
- * EP93xx matrix keypad peripheral handling
- *************************************************************************/
-static struct ep93xx_keypad_platform_data ep93xx_keypad_data;
-
-static struct resource ep93xx_keypad_resource[] = {
-	DEFINE_RES_MEM(EP93XX_KEY_MATRIX_PHYS_BASE, 0x0c),
-	DEFINE_RES_IRQ(IRQ_EP93XX_KEY),
-};
-
-static struct platform_device ep93xx_keypad_device = {
-	.name		= "ep93xx-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &ep93xx_keypad_data,
-	},
-	.num_resources	= ARRAY_SIZE(ep93xx_keypad_resource),
-	.resource	= ep93xx_keypad_resource,
-};
-
-/**
- * ep93xx_register_keypad - Register the keypad platform device.
- * @data:	platform specific keypad configuration (__initdata)
- */
-void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data)
-{
-	ep93xx_keypad_data = *data;
-	platform_device_register(&ep93xx_keypad_device);
-}
-
-int ep93xx_keypad_acquire_gpio(struct platform_device *pdev)
-{
-	int err;
-	int i;
-
-	for (i = 0; i < 8; i++) {
-		err = gpio_request(EP93XX_GPIO_LINE_C(i), dev_name(&pdev->dev));
-		if (err)
-			goto fail_gpio_c;
-		err = gpio_request(EP93XX_GPIO_LINE_D(i), dev_name(&pdev->dev));
-		if (err)
-			goto fail_gpio_d;
-	}
-
-	/* Enable the keypad controller; GPIO ports C and D used for keypad */
-	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_KEYS |
-				 EP93XX_SYSCON_DEVCFG_GONK);
-
-	return 0;
-
-fail_gpio_d:
-	gpio_free(EP93XX_GPIO_LINE_C(i));
-fail_gpio_c:
-	for (--i; i >= 0; --i) {
-		gpio_free(EP93XX_GPIO_LINE_C(i));
-		gpio_free(EP93XX_GPIO_LINE_D(i));
-	}
-	return err;
-}
-EXPORT_SYMBOL(ep93xx_keypad_acquire_gpio);
-
-void ep93xx_keypad_release_gpio(struct platform_device *pdev)
-{
-	int i;
-
-	for (i = 0; i < 8; i++) {
-		gpio_free(EP93XX_GPIO_LINE_C(i));
-		gpio_free(EP93XX_GPIO_LINE_D(i));
-	}
-
-	/* Disable the keypad controller; GPIO ports C and D used for GPIO */
-	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
-			       EP93XX_SYSCON_DEVCFG_GONK);
-}
-EXPORT_SYMBOL(ep93xx_keypad_release_gpio);
-
-/*************************************************************************
- * EP93xx I2S audio peripheral handling
- *************************************************************************/
-static struct resource ep93xx_i2s_resource[] = {
-	DEFINE_RES_MEM(EP93XX_I2S_PHYS_BASE, 0x100),
-	DEFINE_RES_IRQ(IRQ_EP93XX_SAI),
-};
-
-static struct platform_device ep93xx_i2s_device = {
-	.name		= "ep93xx-i2s",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(ep93xx_i2s_resource),
-	.resource	= ep93xx_i2s_resource,
-};
-
-static struct platform_device ep93xx_pcm_device = {
-	.name		= "ep93xx-pcm-audio",
-	.id		= -1,
-};
-
-void __init ep93xx_register_i2s(void)
-{
-	platform_device_register(&ep93xx_i2s_device);
-	platform_device_register(&ep93xx_pcm_device);
-}
-
-#define EP93XX_SYSCON_DEVCFG_I2S_MASK	(EP93XX_SYSCON_DEVCFG_I2SONSSP | \
-					 EP93XX_SYSCON_DEVCFG_I2SONAC97)
-
-#define EP93XX_I2SCLKDIV_MASK		(EP93XX_SYSCON_I2SCLKDIV_ORIDE | \
-					 EP93XX_SYSCON_I2SCLKDIV_SPOL)
-
-int ep93xx_i2s_acquire(void)
-{
-	unsigned val;
-
-	ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_I2SONAC97,
-			EP93XX_SYSCON_DEVCFG_I2S_MASK);
-
-	/*
-	 * This is potentially racy with the clock api for i2s_mclk, sclk and 
-	 * lrclk. Since the i2s driver is the only user of those clocks we
-	 * rely on it to prevent parallel use of this function and the 
-	 * clock api for the i2s clocks.
-	 */
-	val = __raw_readl(EP93XX_SYSCON_I2SCLKDIV);
-	val &= ~EP93XX_I2SCLKDIV_MASK;
-	val |= EP93XX_SYSCON_I2SCLKDIV_ORIDE | EP93XX_SYSCON_I2SCLKDIV_SPOL;
-	ep93xx_syscon_swlocked_write(val, EP93XX_SYSCON_I2SCLKDIV);
-
-	return 0;
-}
-EXPORT_SYMBOL(ep93xx_i2s_acquire);
-
-void ep93xx_i2s_release(void)
-{
-	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK);
-}
-EXPORT_SYMBOL(ep93xx_i2s_release);
-
-/*************************************************************************
- * EP93xx AC97 audio peripheral handling
- *************************************************************************/
-static struct resource ep93xx_ac97_resources[] = {
-	DEFINE_RES_MEM(EP93XX_AAC_PHYS_BASE, 0xac),
-	DEFINE_RES_IRQ(IRQ_EP93XX_AACINTR),
-};
-
-static struct platform_device ep93xx_ac97_device = {
-	.name		= "ep93xx-ac97",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(ep93xx_ac97_resources),
-	.resource	= ep93xx_ac97_resources,
-};
-
-void __init ep93xx_register_ac97(void)
-{
-	/*
-	 * Make sure that the AC97 pins are not used by I2S.
-	 */
-	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONAC97);
-
-	platform_device_register(&ep93xx_ac97_device);
-	platform_device_register(&ep93xx_pcm_device);
-}
-
-/*************************************************************************
- * EP93xx Watchdog
- *************************************************************************/
-static struct resource ep93xx_wdt_resources[] = {
-	DEFINE_RES_MEM(EP93XX_WATCHDOG_PHYS_BASE, 0x08),
-};
-
-static struct platform_device ep93xx_wdt_device = {
-	.name		= "ep93xx-wdt",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(ep93xx_wdt_resources),
-	.resource	= ep93xx_wdt_resources,
-};
-
-/*************************************************************************
- * EP93xx IDE
- *************************************************************************/
-static struct resource ep93xx_ide_resources[] = {
-	DEFINE_RES_MEM(EP93XX_IDE_PHYS_BASE, 0x38),
-	DEFINE_RES_IRQ(IRQ_EP93XX_EXT3),
-};
-
-static struct platform_device ep93xx_ide_device = {
-	.name		= "ep93xx-ide",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &ep93xx_ide_device.dev.coherent_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(ep93xx_ide_resources),
-	.resource	= ep93xx_ide_resources,
-};
-
-void __init ep93xx_register_ide(void)
-{
-	platform_device_register(&ep93xx_ide_device);
-}
-
-int ep93xx_ide_acquire_gpio(struct platform_device *pdev)
-{
-	int err;
-	int i;
-
-	err = gpio_request(EP93XX_GPIO_LINE_EGPIO2, dev_name(&pdev->dev));
-	if (err)
-		return err;
-	err = gpio_request(EP93XX_GPIO_LINE_EGPIO15, dev_name(&pdev->dev));
-	if (err)
-		goto fail_egpio15;
-	for (i = 2; i < 8; i++) {
-		err = gpio_request(EP93XX_GPIO_LINE_E(i), dev_name(&pdev->dev));
-		if (err)
-			goto fail_gpio_e;
-	}
-	for (i = 4; i < 8; i++) {
-		err = gpio_request(EP93XX_GPIO_LINE_G(i), dev_name(&pdev->dev));
-		if (err)
-			goto fail_gpio_g;
-	}
-	for (i = 0; i < 8; i++) {
-		err = gpio_request(EP93XX_GPIO_LINE_H(i), dev_name(&pdev->dev));
-		if (err)
-			goto fail_gpio_h;
-	}
-
-	/* GPIO ports E[7:2], G[7:4] and H used by IDE */
-	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_EONIDE |
-				 EP93XX_SYSCON_DEVCFG_GONIDE |
-				 EP93XX_SYSCON_DEVCFG_HONIDE);
-	return 0;
-
-fail_gpio_h:
-	for (--i; i >= 0; --i)
-		gpio_free(EP93XX_GPIO_LINE_H(i));
-	i = 8;
-fail_gpio_g:
-	for (--i; i >= 4; --i)
-		gpio_free(EP93XX_GPIO_LINE_G(i));
-	i = 8;
-fail_gpio_e:
-	for (--i; i >= 2; --i)
-		gpio_free(EP93XX_GPIO_LINE_E(i));
-	gpio_free(EP93XX_GPIO_LINE_EGPIO15);
-fail_egpio15:
-	gpio_free(EP93XX_GPIO_LINE_EGPIO2);
-	return err;
-}
-EXPORT_SYMBOL(ep93xx_ide_acquire_gpio);
-
-void ep93xx_ide_release_gpio(struct platform_device *pdev)
-{
-	int i;
-
-	for (i = 2; i < 8; i++)
-		gpio_free(EP93XX_GPIO_LINE_E(i));
-	for (i = 4; i < 8; i++)
-		gpio_free(EP93XX_GPIO_LINE_G(i));
-	for (i = 0; i < 8; i++)
-		gpio_free(EP93XX_GPIO_LINE_H(i));
-	gpio_free(EP93XX_GPIO_LINE_EGPIO15);
-	gpio_free(EP93XX_GPIO_LINE_EGPIO2);
-
-
-	/* GPIO ports E[7:2], G[7:4] and H used by GPIO */
-	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_EONIDE |
-			       EP93XX_SYSCON_DEVCFG_GONIDE |
-			       EP93XX_SYSCON_DEVCFG_HONIDE);
-}
-EXPORT_SYMBOL(ep93xx_ide_release_gpio);
-
-/*************************************************************************
- * EP93xx ADC
- *************************************************************************/
-static struct resource ep93xx_adc_resources[] = {
-	DEFINE_RES_MEM(EP93XX_ADC_PHYS_BASE, 0x28),
-	DEFINE_RES_IRQ(IRQ_EP93XX_TOUCH),
-};
-
-static struct platform_device ep93xx_adc_device = {
-	.name		= "ep93xx-adc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(ep93xx_adc_resources),
-	.resource	= ep93xx_adc_resources,
-};
-
-void __init ep93xx_register_adc(void)
-{
-	/* Power up ADC, deactivate Touch Screen Controller */
-	ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_TIN,
-				EP93XX_SYSCON_DEVCFG_ADCPD);
-
-	platform_device_register(&ep93xx_adc_device);
-}
-
-/*************************************************************************
- * EP93xx Security peripheral
- *************************************************************************/
-
-/*
- * The Maverick Key is 256 bits of micro fuses blown at the factory during
- * manufacturing to uniquely identify a part.
- *
- * See: http://arm.cirrus.com/forum/viewtopic.php?t=486&highlight=maverick+key
- */
-#define EP93XX_SECURITY_REG(x)		(EP93XX_SECURITY_BASE + (x))
-#define EP93XX_SECURITY_SECFLG		EP93XX_SECURITY_REG(0x2400)
-#define EP93XX_SECURITY_FUSEFLG		EP93XX_SECURITY_REG(0x2410)
-#define EP93XX_SECURITY_UNIQID		EP93XX_SECURITY_REG(0x2440)
-#define EP93XX_SECURITY_UNIQCHK		EP93XX_SECURITY_REG(0x2450)
-#define EP93XX_SECURITY_UNIQVAL		EP93XX_SECURITY_REG(0x2460)
-#define EP93XX_SECURITY_SECID1		EP93XX_SECURITY_REG(0x2500)
-#define EP93XX_SECURITY_SECID2		EP93XX_SECURITY_REG(0x2504)
-#define EP93XX_SECURITY_SECCHK1		EP93XX_SECURITY_REG(0x2520)
-#define EP93XX_SECURITY_SECCHK2		EP93XX_SECURITY_REG(0x2524)
-#define EP93XX_SECURITY_UNIQID2		EP93XX_SECURITY_REG(0x2700)
-#define EP93XX_SECURITY_UNIQID3		EP93XX_SECURITY_REG(0x2704)
-#define EP93XX_SECURITY_UNIQID4		EP93XX_SECURITY_REG(0x2708)
-#define EP93XX_SECURITY_UNIQID5		EP93XX_SECURITY_REG(0x270c)
-
-static char ep93xx_soc_id[33];
-
-static const char __init *ep93xx_get_soc_id(void)
-{
-	unsigned int id, id2, id3, id4, id5;
-
-	if (__raw_readl(EP93XX_SECURITY_UNIQVAL) != 1)
-		return "bad Hamming code";
-
-	id = __raw_readl(EP93XX_SECURITY_UNIQID);
-	id2 = __raw_readl(EP93XX_SECURITY_UNIQID2);
-	id3 = __raw_readl(EP93XX_SECURITY_UNIQID3);
-	id4 = __raw_readl(EP93XX_SECURITY_UNIQID4);
-	id5 = __raw_readl(EP93XX_SECURITY_UNIQID5);
-
-	if (id != id2)
-		return "invalid";
-
-	/* Toss the unique ID into the entropy pool */
-	add_device_randomness(&id2, 4);
-	add_device_randomness(&id3, 4);
-	add_device_randomness(&id4, 4);
-	add_device_randomness(&id5, 4);
-
-	snprintf(ep93xx_soc_id, sizeof(ep93xx_soc_id),
-		 "%08x%08x%08x%08x", id2, id3, id4, id5);
-
-	return ep93xx_soc_id;
-}
-
-static const char __init *ep93xx_get_soc_rev(void)
-{
-	int rev = ep93xx_chip_revision();
-
-	switch (rev) {
-	case EP93XX_CHIP_REV_D0:
-		return "D0";
-	case EP93XX_CHIP_REV_D1:
-		return "D1";
-	case EP93XX_CHIP_REV_E0:
-		return "E0";
-	case EP93XX_CHIP_REV_E1:
-		return "E1";
-	case EP93XX_CHIP_REV_E2:
-		return "E2";
-	default:
-		return "unknown";
-	}
-}
-
-static const char __init *ep93xx_get_machine_name(void)
-{
-	return kasprintf(GFP_KERNEL,"%s", machine_desc->name);
-}
-
-static struct device __init *ep93xx_init_soc(void)
-{
-	struct soc_device_attribute *soc_dev_attr;
-	struct soc_device *soc_dev;
-
-	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
-	if (!soc_dev_attr)
-		return NULL;
-
-	soc_dev_attr->machine = ep93xx_get_machine_name();
-	soc_dev_attr->family = "Cirrus Logic EP93xx";
-	soc_dev_attr->revision = ep93xx_get_soc_rev();
-	soc_dev_attr->soc_id = ep93xx_get_soc_id();
-
-	soc_dev = soc_device_register(soc_dev_attr);
-	if (IS_ERR(soc_dev)) {
-		kfree(soc_dev_attr->machine);
-		kfree(soc_dev_attr);
-		return NULL;
-	}
-
-	return soc_device_to_device(soc_dev);
-}
-
-struct device __init *ep93xx_init_devices(void)
-{
-	struct device *parent;
-	int i;
-
-	/* Disallow access to MaverickCrunch initially */
-	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA);
-
-	/* Default all ports to GPIO */
-	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
-			       EP93XX_SYSCON_DEVCFG_GONK |
-			       EP93XX_SYSCON_DEVCFG_EONIDE |
-			       EP93XX_SYSCON_DEVCFG_GONIDE |
-			       EP93XX_SYSCON_DEVCFG_HONIDE);
-
-	parent = ep93xx_init_soc();
-
-	/* Get the GPIO working early, other devices need it */
-	for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_device); i++)
-		platform_device_register(ep93xx_gpio_device[i]);
-
-	amba_device_register(&uart1_device, &iomem_resource);
-	amba_device_register(&uart2_device, &iomem_resource);
-	amba_device_register(&uart3_device, &iomem_resource);
-
-	platform_device_register(&ep93xx_rtc_device);
-	platform_device_register(&ep93xx_ohci_device);
-	platform_device_register(&ep93xx_wdt_device);
-
-	gpiod_add_lookup_table(&ep93xx_leds_gpio_table);
-	gpio_led_register_device(-1, &ep93xx_led_data);
-
-	return parent;
-}
-
-void ep93xx_restart(enum reboot_mode mode, const char *cmd)
-{
-	/*
-	 * Set then clear the SWRST bit to initiate a software reset
-	 */
-	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST);
-	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST);
-
-	while (1)
-		;
-}
diff --git a/arch/arm/mach-ep93xx/dma.c b/arch/arm/mach-ep93xx/dma.c
deleted file mode 100644
index 74515acab8ef..000000000000
--- a/arch/arm/mach-ep93xx/dma.c
+++ /dev/null
@@ -1,114 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/dma.c
- *
- * Platform support code for the EP93xx dmaengine driver.
- *
- * Copyright (C) 2011 Mika Westerberg
- *
- * This work is based on the original dma-m2p implementation with
- * following copyrights:
- *
- *   Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *   Copyright (C) 2006 Applied Data Systems
- *   Copyright (C) 2009 Ryan Mallon <rmallon@gmail.com>
- */
-
-#include <linux/dmaengine.h>
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <linux/platform_data/dma-ep93xx.h>
-#include "hardware.h"
-
-#include "soc.h"
-
-#define DMA_CHANNEL(_name, _base, _irq) \
-	{ .name = (_name), .base = (_base), .irq = (_irq) }
-
-/*
- * DMA M2P channels.
- *
- * On the EP93xx chip the following peripherals my be allocated to the 10
- * Memory to Internal Peripheral (M2P) channels (5 transmit + 5 receive).
- *
- *	I2S	contains 3 Tx and 3 Rx DMA Channels
- *	AAC	contains 3 Tx and 3 Rx DMA Channels
- *	UART1	contains 1 Tx and 1 Rx DMA Channels
- *	UART2	contains 1 Tx and 1 Rx DMA Channels
- *	UART3	contains 1 Tx and 1 Rx DMA Channels
- *	IrDA	contains 1 Tx and 1 Rx DMA Channels
- *
- * Registers are mapped statically in ep93xx_map_io().
- */
-static struct ep93xx_dma_chan_data ep93xx_dma_m2p_channels[] = {
-	DMA_CHANNEL("m2p0", EP93XX_DMA_BASE + 0x0000, IRQ_EP93XX_DMAM2P0),
-	DMA_CHANNEL("m2p1", EP93XX_DMA_BASE + 0x0040, IRQ_EP93XX_DMAM2P1),
-	DMA_CHANNEL("m2p2", EP93XX_DMA_BASE + 0x0080, IRQ_EP93XX_DMAM2P2),
-	DMA_CHANNEL("m2p3", EP93XX_DMA_BASE + 0x00c0, IRQ_EP93XX_DMAM2P3),
-	DMA_CHANNEL("m2p4", EP93XX_DMA_BASE + 0x0240, IRQ_EP93XX_DMAM2P4),
-	DMA_CHANNEL("m2p5", EP93XX_DMA_BASE + 0x0200, IRQ_EP93XX_DMAM2P5),
-	DMA_CHANNEL("m2p6", EP93XX_DMA_BASE + 0x02c0, IRQ_EP93XX_DMAM2P6),
-	DMA_CHANNEL("m2p7", EP93XX_DMA_BASE + 0x0280, IRQ_EP93XX_DMAM2P7),
-	DMA_CHANNEL("m2p8", EP93XX_DMA_BASE + 0x0340, IRQ_EP93XX_DMAM2P8),
-	DMA_CHANNEL("m2p9", EP93XX_DMA_BASE + 0x0300, IRQ_EP93XX_DMAM2P9),
-};
-
-static struct ep93xx_dma_platform_data ep93xx_dma_m2p_data = {
-	.channels		= ep93xx_dma_m2p_channels,
-	.num_channels		= ARRAY_SIZE(ep93xx_dma_m2p_channels),
-};
-
-static u64 ep93xx_dma_m2p_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ep93xx_dma_m2p_device = {
-	.name			= "ep93xx-dma-m2p",
-	.id			= -1,
-	.dev			= {
-		.platform_data		= &ep93xx_dma_m2p_data,
-		.dma_mask		= &ep93xx_dma_m2p_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-/*
- * DMA M2M channels.
- *
- * There are 2 M2M channels which support memcpy/memset and in addition simple
- * hardware requests from/to SSP and IDE. We do not implement an external
- * hardware requests.
- *
- * Registers are mapped statically in ep93xx_map_io().
- */
-static struct ep93xx_dma_chan_data ep93xx_dma_m2m_channels[] = {
-	DMA_CHANNEL("m2m0", EP93XX_DMA_BASE + 0x0100, IRQ_EP93XX_DMAM2M0),
-	DMA_CHANNEL("m2m1", EP93XX_DMA_BASE + 0x0140, IRQ_EP93XX_DMAM2M1),
-};
-
-static struct ep93xx_dma_platform_data ep93xx_dma_m2m_data = {
-	.channels		= ep93xx_dma_m2m_channels,
-	.num_channels		= ARRAY_SIZE(ep93xx_dma_m2m_channels),
-};
-
-static u64 ep93xx_dma_m2m_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ep93xx_dma_m2m_device = {
-	.name			= "ep93xx-dma-m2m",
-	.id			= -1,
-	.dev			= {
-		.platform_data		= &ep93xx_dma_m2m_data,
-		.dma_mask		= &ep93xx_dma_m2m_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static int __init ep93xx_dma_init(void)
-{
-	platform_device_register(&ep93xx_dma_m2p_device);
-	platform_device_register(&ep93xx_dma_m2m_device);
-	return 0;
-}
-arch_initcall(ep93xx_dma_init);
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
deleted file mode 100644
index c1e880946f72..000000000000
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ /dev/null
@@ -1,344 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/edb93xx.c
- * Cirrus Logic EDB93xx Development Board support.
- *
- * EDB93XX, EDB9301, EDB9307A
- * Copyright (C) 2008-2009 H Hartley Sweeten <hsweeten@visionengravers.com>
- *
- * EDB9302
- * Copyright (C) 2006 George Kashperko <george@chas.com.ua>
- *
- * EDB9302A, EDB9315, EDB9315A
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * EDB9307
- * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
- *
- * EDB9312
- * Copyright (C) 2006 Infosys Technologies Limited
- *                    Toufeeq Hussain <toufeeq_hussain@infosys.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio/machine.h>
-
-#include <sound/cs4271.h>
-
-#include "hardware.h"
-#include <linux/platform_data/video-ep93xx.h>
-#include <linux/platform_data/spi-ep93xx.h>
-#include "gpio-ep93xx.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-static void __init edb93xx_register_flash(void)
-{
-	if (machine_is_edb9307() || machine_is_edb9312() ||
-	    machine_is_edb9315()) {
-		ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
-	} else {
-		ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
-	}
-}
-
-static struct ep93xx_eth_data __initdata edb93xx_eth_data = {
-	.phy_id		= 1,
-};
-
-
-/*************************************************************************
- * EDB93xx i2c peripheral handling
- *************************************************************************/
-
-static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("isl1208", 0x6f),
-	},
-};
-
-static struct i2c_board_info __initdata edb93xx_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("ds1337", 0x68),
-	},
-};
-
-static void __init edb93xx_register_i2c(void)
-{
-	if (machine_is_edb9302a() || machine_is_edb9307a() ||
-	    machine_is_edb9315a()) {
-		ep93xx_register_i2c(edb93xxa_i2c_board_info,
-				    ARRAY_SIZE(edb93xxa_i2c_board_info));
-	} else if (machine_is_edb9302() || machine_is_edb9307()
-		|| machine_is_edb9312() || machine_is_edb9315()) {
-		ep93xx_register_i2c(edb93xx_i2c_board_info,
-				    ARRAY_SIZE(edb93xx_i2c_board_info));
-	}
-}
-
-
-/*************************************************************************
- * EDB93xx SPI peripheral handling
- *************************************************************************/
-static struct cs4271_platform_data edb93xx_cs4271_data = {
-	.gpio_nreset	= -EINVAL,	/* filled in later */
-};
-
-static struct spi_board_info edb93xx_spi_board_info[] __initdata = {
-	{
-		.modalias		= "cs4271",
-		.platform_data		= &edb93xx_cs4271_data,
-		.max_speed_hz		= 6000000,
-		.bus_num		= 0,
-		.chip_select		= 0,
-		.mode			= SPI_MODE_3,
-	},
-};
-
-static struct gpiod_lookup_table edb93xx_spi_cs_gpio_table = {
-	.dev_id = "spi0",
-	.table = {
-		GPIO_LOOKUP("gpio-ep93xx.0", 6, "cs", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct ep93xx_spi_info edb93xx_spi_info __initdata = {
-	/* Intentionally left blank */
-};
-
-static void __init edb93xx_register_spi(void)
-{
-	if (machine_is_edb9301() || machine_is_edb9302())
-		edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO1;
-	else if (machine_is_edb9302a() || machine_is_edb9307a())
-		edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_H(2);
-	else if (machine_is_edb9315a())
-		edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO14;
-
-	gpiod_add_lookup_table(&edb93xx_spi_cs_gpio_table);
-	ep93xx_register_spi(&edb93xx_spi_info, edb93xx_spi_board_info,
-			    ARRAY_SIZE(edb93xx_spi_board_info));
-}
-
-
-/*************************************************************************
- * EDB93xx I2S
- *************************************************************************/
-static struct platform_device edb93xx_audio_device = {
-	.name		= "edb93xx-audio",
-	.id		= -1,
-};
-
-static int __init edb93xx_has_audio(void)
-{
-	return (machine_is_edb9301() || machine_is_edb9302() ||
-		machine_is_edb9302a() || machine_is_edb9307a() ||
-		machine_is_edb9315a());
-}
-
-static void __init edb93xx_register_i2s(void)
-{
-	if (edb93xx_has_audio()) {
-		ep93xx_register_i2s();
-		platform_device_register(&edb93xx_audio_device);
-	}
-}
-
-
-/*************************************************************************
- * EDB93xx pwm
- *************************************************************************/
-static void __init edb93xx_register_pwm(void)
-{
-	if (machine_is_edb9301() ||
-	    machine_is_edb9302() || machine_is_edb9302a()) {
-		/* EP9301 and EP9302 only have pwm.1 (EGPIO14) */
-		ep93xx_register_pwm(0, 1);
-	} else if (machine_is_edb9307() || machine_is_edb9307a()) {
-		/* EP9307 only has pwm.0 (PWMOUT) */
-		ep93xx_register_pwm(1, 0);
-	} else {
-		/* EP9312 and EP9315 have both */
-		ep93xx_register_pwm(1, 1);
-	}
-}
-
-
-/*************************************************************************
- * EDB93xx framebuffer
- *************************************************************************/
-static struct ep93xxfb_mach_info __initdata edb93xxfb_info = {
-	.flags		= 0,
-};
-
-static int __init edb93xx_has_fb(void)
-{
-	/* These platforms have an ep93xx with video capability */
-	return machine_is_edb9307() || machine_is_edb9307a() ||
-	       machine_is_edb9312() || machine_is_edb9315() ||
-	       machine_is_edb9315a();
-}
-
-static void __init edb93xx_register_fb(void)
-{
-	if (!edb93xx_has_fb())
-		return;
-
-	if (machine_is_edb9307a() || machine_is_edb9315a())
-		edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN0;
-	else
-		edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN3;
-
-	ep93xx_register_fb(&edb93xxfb_info);
-}
-
-
-/*************************************************************************
- * EDB93xx IDE
- *************************************************************************/
-static int __init edb93xx_has_ide(void)
-{
-	/*
-	 * Although EDB9312 and EDB9315 do have IDE capability, they have
-	 * INTRQ line wired as pull-up, which makes using IDE interface
-	 * problematic.
-	 */
-	return machine_is_edb9312() || machine_is_edb9315() ||
-	       machine_is_edb9315a();
-}
-
-static void __init edb93xx_register_ide(void)
-{
-	if (!edb93xx_has_ide())
-		return;
-
-	ep93xx_register_ide();
-}
-
-
-static void __init edb93xx_init_machine(void)
-{
-	ep93xx_init_devices();
-	edb93xx_register_flash();
-	ep93xx_register_eth(&edb93xx_eth_data, 1);
-	edb93xx_register_i2c();
-	edb93xx_register_spi();
-	edb93xx_register_i2s();
-	edb93xx_register_pwm();
-	edb93xx_register_fb();
-	edb93xx_register_ide();
-	ep93xx_register_adc();
-}
-
-
-#ifdef CONFIG_MACH_EDB9301
-MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
-	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= edb93xx_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9302
-MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
-	/* Maintainer: George Kashperko <george@chas.com.ua> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= edb93xx_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9302A
-MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= edb93xx_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9307
-MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
-	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= edb93xx_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9307A
-MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
-	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= edb93xx_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9312
-MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
-	/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= edb93xx_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9315
-MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= edb93xx_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9315A
-MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= edb93xx_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-ep93xx/ep93xx-regs.h b/arch/arm/mach-ep93xx/ep93xx-regs.h
deleted file mode 100644
index 8fa3646de0a4..000000000000
--- a/arch/arm/mach-ep93xx/ep93xx-regs.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ARCH_EP93XX_REGS_H
-#define __ASM_ARCH_EP93XX_REGS_H
-
-/*
- * EP93xx linux memory map:
- *
- * virt		phys		size
- * fe800000			5M		per-platform mappings
- * fed00000	80800000	2M		APB
- * fef00000	80000000	1M		AHB
- */
-
-#define EP93XX_AHB_PHYS_BASE		0x80000000
-#define EP93XX_AHB_VIRT_BASE		0xfef00000
-#define EP93XX_AHB_SIZE			0x00100000
-
-#define EP93XX_AHB_PHYS(x)		(EP93XX_AHB_PHYS_BASE + (x))
-#define EP93XX_AHB_IOMEM(x)		IOMEM(EP93XX_AHB_VIRT_BASE + (x))
-
-#define EP93XX_APB_PHYS_BASE		0x80800000
-#define EP93XX_APB_VIRT_BASE		0xfed00000
-#define EP93XX_APB_SIZE			0x00200000
-
-#define EP93XX_APB_PHYS(x)		(EP93XX_APB_PHYS_BASE + (x))
-#define EP93XX_APB_IOMEM(x)		IOMEM(EP93XX_APB_VIRT_BASE + (x))
-
-/* APB UARTs */
-#define EP93XX_UART1_PHYS_BASE		EP93XX_APB_PHYS(0x000c0000)
-#define EP93XX_UART1_BASE		EP93XX_APB_IOMEM(0x000c0000)
-
-#define EP93XX_UART2_PHYS_BASE		EP93XX_APB_PHYS(0x000d0000)
-#define EP93XX_UART2_BASE		EP93XX_APB_IOMEM(0x000d0000)
-
-#define EP93XX_UART3_PHYS_BASE		EP93XX_APB_PHYS(0x000e0000)
-#define EP93XX_UART3_BASE		EP93XX_APB_IOMEM(0x000e0000)
-
-#endif
diff --git a/arch/arm/mach-ep93xx/gpio-ep93xx.h b/arch/arm/mach-ep93xx/gpio-ep93xx.h
deleted file mode 100644
index 7b46eb7e5507..000000000000
--- a/arch/arm/mach-ep93xx/gpio-ep93xx.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Include file for the EP93XX GPIO controller machine specifics */
-
-#ifndef __GPIO_EP93XX_H
-#define __GPIO_EP93XX_H
-
-#include "ep93xx-regs.h"
-
-#define EP93XX_GPIO_PHYS_BASE		EP93XX_APB_PHYS(0x00040000)
-#define EP93XX_GPIO_BASE		EP93XX_APB_IOMEM(0x00040000)
-#define EP93XX_GPIO_REG(x)		(EP93XX_GPIO_BASE + (x))
-#define EP93XX_GPIO_F_INT_STATUS	EP93XX_GPIO_REG(0x5c)
-#define EP93XX_GPIO_A_INT_STATUS	EP93XX_GPIO_REG(0xa0)
-#define EP93XX_GPIO_B_INT_STATUS	EP93XX_GPIO_REG(0xbc)
-#define EP93XX_GPIO_EEDRIVE		EP93XX_GPIO_REG(0xc8)
-
-/* GPIO port A.  */
-#define EP93XX_GPIO_LINE_A(x)		((x) + 0)
-#define EP93XX_GPIO_LINE_EGPIO0		EP93XX_GPIO_LINE_A(0)
-#define EP93XX_GPIO_LINE_EGPIO1		EP93XX_GPIO_LINE_A(1)
-#define EP93XX_GPIO_LINE_EGPIO2		EP93XX_GPIO_LINE_A(2)
-#define EP93XX_GPIO_LINE_EGPIO3		EP93XX_GPIO_LINE_A(3)
-#define EP93XX_GPIO_LINE_EGPIO4		EP93XX_GPIO_LINE_A(4)
-#define EP93XX_GPIO_LINE_EGPIO5		EP93XX_GPIO_LINE_A(5)
-#define EP93XX_GPIO_LINE_EGPIO6		EP93XX_GPIO_LINE_A(6)
-#define EP93XX_GPIO_LINE_EGPIO7		EP93XX_GPIO_LINE_A(7)
-
-/* GPIO port B.  */
-#define EP93XX_GPIO_LINE_B(x)		((x) + 8)
-#define EP93XX_GPIO_LINE_EGPIO8		EP93XX_GPIO_LINE_B(0)
-#define EP93XX_GPIO_LINE_EGPIO9		EP93XX_GPIO_LINE_B(1)
-#define EP93XX_GPIO_LINE_EGPIO10	EP93XX_GPIO_LINE_B(2)
-#define EP93XX_GPIO_LINE_EGPIO11	EP93XX_GPIO_LINE_B(3)
-#define EP93XX_GPIO_LINE_EGPIO12	EP93XX_GPIO_LINE_B(4)
-#define EP93XX_GPIO_LINE_EGPIO13	EP93XX_GPIO_LINE_B(5)
-#define EP93XX_GPIO_LINE_EGPIO14	EP93XX_GPIO_LINE_B(6)
-#define EP93XX_GPIO_LINE_EGPIO15	EP93XX_GPIO_LINE_B(7)
-
-/* GPIO port C.  */
-#define EP93XX_GPIO_LINE_C(x)		((x) + 40)
-#define EP93XX_GPIO_LINE_ROW0		EP93XX_GPIO_LINE_C(0)
-#define EP93XX_GPIO_LINE_ROW1		EP93XX_GPIO_LINE_C(1)
-#define EP93XX_GPIO_LINE_ROW2		EP93XX_GPIO_LINE_C(2)
-#define EP93XX_GPIO_LINE_ROW3		EP93XX_GPIO_LINE_C(3)
-#define EP93XX_GPIO_LINE_ROW4		EP93XX_GPIO_LINE_C(4)
-#define EP93XX_GPIO_LINE_ROW5		EP93XX_GPIO_LINE_C(5)
-#define EP93XX_GPIO_LINE_ROW6		EP93XX_GPIO_LINE_C(6)
-#define EP93XX_GPIO_LINE_ROW7		EP93XX_GPIO_LINE_C(7)
-
-/* GPIO port D.  */
-#define EP93XX_GPIO_LINE_D(x)		((x) + 24)
-#define EP93XX_GPIO_LINE_COL0		EP93XX_GPIO_LINE_D(0)
-#define EP93XX_GPIO_LINE_COL1		EP93XX_GPIO_LINE_D(1)
-#define EP93XX_GPIO_LINE_COL2		EP93XX_GPIO_LINE_D(2)
-#define EP93XX_GPIO_LINE_COL3		EP93XX_GPIO_LINE_D(3)
-#define EP93XX_GPIO_LINE_COL4		EP93XX_GPIO_LINE_D(4)
-#define EP93XX_GPIO_LINE_COL5		EP93XX_GPIO_LINE_D(5)
-#define EP93XX_GPIO_LINE_COL6		EP93XX_GPIO_LINE_D(6)
-#define EP93XX_GPIO_LINE_COL7		EP93XX_GPIO_LINE_D(7)
-
-/* GPIO port E.  */
-#define EP93XX_GPIO_LINE_E(x)		((x) + 32)
-#define EP93XX_GPIO_LINE_GRLED		EP93XX_GPIO_LINE_E(0)
-#define EP93XX_GPIO_LINE_RDLED		EP93XX_GPIO_LINE_E(1)
-#define EP93XX_GPIO_LINE_DIORn		EP93XX_GPIO_LINE_E(2)
-#define EP93XX_GPIO_LINE_IDECS1n	EP93XX_GPIO_LINE_E(3)
-#define EP93XX_GPIO_LINE_IDECS2n	EP93XX_GPIO_LINE_E(4)
-#define EP93XX_GPIO_LINE_IDEDA0		EP93XX_GPIO_LINE_E(5)
-#define EP93XX_GPIO_LINE_IDEDA1		EP93XX_GPIO_LINE_E(6)
-#define EP93XX_GPIO_LINE_IDEDA2		EP93XX_GPIO_LINE_E(7)
-
-/* GPIO port F.  */
-#define EP93XX_GPIO_LINE_F(x)		((x) + 16)
-#define EP93XX_GPIO_LINE_WP		EP93XX_GPIO_LINE_F(0)
-#define EP93XX_GPIO_LINE_MCCD1		EP93XX_GPIO_LINE_F(1)
-#define EP93XX_GPIO_LINE_MCCD2		EP93XX_GPIO_LINE_F(2)
-#define EP93XX_GPIO_LINE_MCBVD1		EP93XX_GPIO_LINE_F(3)
-#define EP93XX_GPIO_LINE_MCBVD2		EP93XX_GPIO_LINE_F(4)
-#define EP93XX_GPIO_LINE_VS1		EP93XX_GPIO_LINE_F(5)
-#define EP93XX_GPIO_LINE_READY		EP93XX_GPIO_LINE_F(6)
-#define EP93XX_GPIO_LINE_VS2		EP93XX_GPIO_LINE_F(7)
-
-/* GPIO port G.  */
-#define EP93XX_GPIO_LINE_G(x)		((x) + 48)
-#define EP93XX_GPIO_LINE_EECLK		EP93XX_GPIO_LINE_G(0)
-#define EP93XX_GPIO_LINE_EEDAT		EP93XX_GPIO_LINE_G(1)
-#define EP93XX_GPIO_LINE_SLA0		EP93XX_GPIO_LINE_G(2)
-#define EP93XX_GPIO_LINE_SLA1		EP93XX_GPIO_LINE_G(3)
-#define EP93XX_GPIO_LINE_DD12		EP93XX_GPIO_LINE_G(4)
-#define EP93XX_GPIO_LINE_DD13		EP93XX_GPIO_LINE_G(5)
-#define EP93XX_GPIO_LINE_DD14		EP93XX_GPIO_LINE_G(6)
-#define EP93XX_GPIO_LINE_DD15		EP93XX_GPIO_LINE_G(7)
-
-/* GPIO port H.  */
-#define EP93XX_GPIO_LINE_H(x)		((x) + 56)
-#define EP93XX_GPIO_LINE_DD0		EP93XX_GPIO_LINE_H(0)
-#define EP93XX_GPIO_LINE_DD1		EP93XX_GPIO_LINE_H(1)
-#define EP93XX_GPIO_LINE_DD2		EP93XX_GPIO_LINE_H(2)
-#define EP93XX_GPIO_LINE_DD3		EP93XX_GPIO_LINE_H(3)
-#define EP93XX_GPIO_LINE_DD4		EP93XX_GPIO_LINE_H(4)
-#define EP93XX_GPIO_LINE_DD5		EP93XX_GPIO_LINE_H(5)
-#define EP93XX_GPIO_LINE_DD6		EP93XX_GPIO_LINE_H(6)
-#define EP93XX_GPIO_LINE_DD7		EP93XX_GPIO_LINE_H(7)
-
-/* maximum value for gpio line identifiers */
-#define EP93XX_GPIO_LINE_MAX		EP93XX_GPIO_LINE_H(7)
-
-/* maximum value for irq capable line identifiers */
-#define EP93XX_GPIO_LINE_MAX_IRQ	EP93XX_GPIO_LINE_F(7)
-
-#endif /* __GPIO_EP93XX_H */
diff --git a/arch/arm/mach-ep93xx/hardware.h b/arch/arm/mach-ep93xx/hardware.h
deleted file mode 100644
index e7d850e04782..000000000000
--- a/arch/arm/mach-ep93xx/hardware.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-ep93xx/include/mach/hardware.h
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "platform.h"
-
-/*
- * The EP93xx has two external crystal oscillators.  To generate the
- * required high-frequency clocks, the processor uses two phase-locked-
- * loops (PLLs) to multiply the incoming external clock signal to much
- * higher frequencies that are then divided down by programmable dividers
- * to produce the needed clocks.  The PLLs operate independently of one
- * another.
- */
-#define EP93XX_EXT_CLK_RATE	14745600
-#define EP93XX_EXT_RTC_RATE	32768
-
-#define EP93XX_KEYTCHCLK_DIV4	(EP93XX_EXT_CLK_RATE / 4)
-#define EP93XX_KEYTCHCLK_DIV16	(EP93XX_EXT_CLK_RATE / 16)
-
-#endif
diff --git a/arch/arm/mach-ep93xx/irqs.h b/arch/arm/mach-ep93xx/irqs.h
deleted file mode 100644
index 353201b90c66..000000000000
--- a/arch/arm/mach-ep93xx/irqs.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#define IRQ_EP93XX_VIC0			1
-
-#define IRQ_EP93XX_COMMRX		(IRQ_EP93XX_VIC0 + 2)
-#define IRQ_EP93XX_COMMTX		(IRQ_EP93XX_VIC0 + 3)
-#define IRQ_EP93XX_TIMER1		(IRQ_EP93XX_VIC0 + 4)
-#define IRQ_EP93XX_TIMER2		(IRQ_EP93XX_VIC0 + 5)
-#define IRQ_EP93XX_AACINTR		(IRQ_EP93XX_VIC0 + 6)
-#define IRQ_EP93XX_DMAM2P0		(IRQ_EP93XX_VIC0 + 7)
-#define IRQ_EP93XX_DMAM2P1		(IRQ_EP93XX_VIC0 + 8)
-#define IRQ_EP93XX_DMAM2P2		(IRQ_EP93XX_VIC0 + 9)
-#define IRQ_EP93XX_DMAM2P3		(IRQ_EP93XX_VIC0 + 10)
-#define IRQ_EP93XX_DMAM2P4		(IRQ_EP93XX_VIC0 + 11)
-#define IRQ_EP93XX_DMAM2P5		(IRQ_EP93XX_VIC0 + 12)
-#define IRQ_EP93XX_DMAM2P6		(IRQ_EP93XX_VIC0 + 13)
-#define IRQ_EP93XX_DMAM2P7		(IRQ_EP93XX_VIC0 + 14)
-#define IRQ_EP93XX_DMAM2P8		(IRQ_EP93XX_VIC0 + 15)
-#define IRQ_EP93XX_DMAM2P9		(IRQ_EP93XX_VIC0 + 16)
-#define IRQ_EP93XX_DMAM2M0		(IRQ_EP93XX_VIC0 + 17)
-#define IRQ_EP93XX_DMAM2M1		(IRQ_EP93XX_VIC0 + 18)
-#define IRQ_EP93XX_GPIO0MUX		(IRQ_EP93XX_VIC0 + 19)
-#define IRQ_EP93XX_GPIO1MUX		(IRQ_EP93XX_VIC0 + 20)
-#define IRQ_EP93XX_GPIO2MUX		(IRQ_EP93XX_VIC0 + 21)
-#define IRQ_EP93XX_GPIO3MUX		(IRQ_EP93XX_VIC0 + 22)
-#define IRQ_EP93XX_UART1RX		(IRQ_EP93XX_VIC0 + 23)
-#define IRQ_EP93XX_UART1TX		(IRQ_EP93XX_VIC0 + 24)
-#define IRQ_EP93XX_UART2RX		(IRQ_EP93XX_VIC0 + 25)
-#define IRQ_EP93XX_UART2TX		(IRQ_EP93XX_VIC0 + 26)
-#define IRQ_EP93XX_UART3RX		(IRQ_EP93XX_VIC0 + 27)
-#define IRQ_EP93XX_UART3TX		(IRQ_EP93XX_VIC0 + 28)
-#define IRQ_EP93XX_KEY			(IRQ_EP93XX_VIC0 + 29)
-#define IRQ_EP93XX_TOUCH		(IRQ_EP93XX_VIC0 + 30)
-#define EP93XX_VIC1_VALID_IRQ_MASK	0x7ffffffc
-
-#define IRQ_EP93XX_VIC1			(IRQ_EP93XX_VIC0 + 32)
-
-#define IRQ_EP93XX_EXT0			(IRQ_EP93XX_VIC1 + 0)
-#define IRQ_EP93XX_EXT1			(IRQ_EP93XX_VIC1 + 1)
-#define IRQ_EP93XX_EXT2			(IRQ_EP93XX_VIC1 + 2)
-#define IRQ_EP93XX_64HZ			(IRQ_EP93XX_VIC1 + 3)
-#define IRQ_EP93XX_WATCHDOG		(IRQ_EP93XX_VIC1 + 4)
-#define IRQ_EP93XX_RTC			(IRQ_EP93XX_VIC1 + 5)
-#define IRQ_EP93XX_IRDA			(IRQ_EP93XX_VIC1 + 6)
-#define IRQ_EP93XX_ETHERNET		(IRQ_EP93XX_VIC1 + 7)
-#define IRQ_EP93XX_EXT3			(IRQ_EP93XX_VIC1 + 8)
-#define IRQ_EP93XX_PROG			(IRQ_EP93XX_VIC1 + 9)
-#define IRQ_EP93XX_1HZ			(IRQ_EP93XX_VIC1 + 10)
-#define IRQ_EP93XX_VSYNC		(IRQ_EP93XX_VIC1 + 11)
-#define IRQ_EP93XX_VIDEO_FIFO		(IRQ_EP93XX_VIC1 + 12)
-#define IRQ_EP93XX_SSP1RX		(IRQ_EP93XX_VIC1 + 13)
-#define IRQ_EP93XX_SSP1TX		(IRQ_EP93XX_VIC1 + 14)
-#define IRQ_EP93XX_GPIO4MUX		(IRQ_EP93XX_VIC1 + 15)
-#define IRQ_EP93XX_GPIO5MUX		(IRQ_EP93XX_VIC1 + 16)
-#define IRQ_EP93XX_GPIO6MUX		(IRQ_EP93XX_VIC1 + 17)
-#define IRQ_EP93XX_GPIO7MUX		(IRQ_EP93XX_VIC1 + 18)
-#define IRQ_EP93XX_TIMER3		(IRQ_EP93XX_VIC1 + 19)
-#define IRQ_EP93XX_UART1		(IRQ_EP93XX_VIC1 + 20)
-#define IRQ_EP93XX_SSP			(IRQ_EP93XX_VIC1 + 21)
-#define IRQ_EP93XX_UART2		(IRQ_EP93XX_VIC1 + 22)
-#define IRQ_EP93XX_UART3		(IRQ_EP93XX_VIC1 + 23)
-#define IRQ_EP93XX_USB			(IRQ_EP93XX_VIC1 + 24)
-#define IRQ_EP93XX_ETHERNET_PME		(IRQ_EP93XX_VIC1 + 25)
-#define IRQ_EP93XX_DSP			(IRQ_EP93XX_VIC1 + 26)
-#define IRQ_EP93XX_GPIO_AB		(IRQ_EP93XX_VIC1 + 27)
-#define IRQ_EP93XX_SAI			(IRQ_EP93XX_VIC1 + 28)
-#define EP93XX_VIC2_VALID_IRQ_MASK	0x1fffffff
-
-#define NR_EP93XX_IRQS			(IRQ_EP93XX_VIC1 + 32 + 24)
-
-#define EP93XX_BOARD_IRQ(x)		(NR_EP93XX_IRQS + (x))
-#define EP93XX_BOARD_IRQS		32
-
-#endif
diff --git a/arch/arm/mach-ep93xx/platform.h b/arch/arm/mach-ep93xx/platform.h
deleted file mode 100644
index 5fb1b919133f..000000000000
--- a/arch/arm/mach-ep93xx/platform.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-ep93xx/include/mach/platform.h
- */
-
-#ifndef __ASSEMBLY__
-
-#include <linux/platform_data/eth-ep93xx.h>
-#include <linux/reboot.h>
-
-struct device;
-struct i2c_board_info;
-struct spi_board_info;
-struct platform_device;
-struct ep93xxfb_mach_info;
-struct ep93xx_keypad_platform_data;
-struct ep93xx_spi_info;
-
-void ep93xx_map_io(void);
-void ep93xx_init_irq(void);
-
-void ep93xx_register_flash(unsigned int width,
-			   resource_size_t start, resource_size_t size);
-
-void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
-void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
-void ep93xx_register_spi(struct ep93xx_spi_info *info,
-			 struct spi_board_info *devices, int num);
-void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
-void ep93xx_register_pwm(int pwm0, int pwm1);
-void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data);
-void ep93xx_register_i2s(void);
-void ep93xx_register_ac97(void);
-void ep93xx_register_ide(void);
-void ep93xx_register_adc(void);
-
-struct device *ep93xx_init_devices(void);
-extern void ep93xx_timer_init(void);
-
-void ep93xx_restart(enum reboot_mode, const char *);
-
-#endif
diff --git a/arch/arm/mach-ep93xx/soc.h b/arch/arm/mach-ep93xx/soc.h
deleted file mode 100644
index 3245ebbd5069..000000000000
--- a/arch/arm/mach-ep93xx/soc.h
+++ /dev/null
@@ -1,212 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-ep93xx/soc.h
- *
- * Copyright (C) 2012 Open Kernel Labs <www.ok-labs.com>
- * Copyright (C) 2012 Ryan Mallon <rmallon@gmail.com>
- */
-
-#ifndef _EP93XX_SOC_H
-#define _EP93XX_SOC_H
-
-#include "ep93xx-regs.h"
-#include "irqs.h"
-
-/*
- * EP93xx Physical Memory Map:
- *
- * The ASDO pin is sampled at system reset to select a synchronous or
- * asynchronous boot configuration.  When ASDO is "1" (i.e. pulled-up)
- * the synchronous boot mode is selected.  When ASDO is "0" (i.e
- * pulled-down) the asynchronous boot mode is selected.
- *
- * In synchronous boot mode nSDCE3 is decoded starting at physical address
- * 0x00000000 and nCS0 is decoded starting at 0xf0000000.  For asynchronous
- * boot mode they are swapped with nCS0 decoded at 0x00000000 ann nSDCE3
- * decoded at 0xf0000000.
- *
- * There is known errata for the EP93xx dealing with External Memory
- * Configurations.  Please refer to "AN273: EP93xx Silicon Rev E Design
- * Guidelines" for more information.  This document can be found at:
- *
- *	http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
- */
-
-#define EP93XX_CS0_PHYS_BASE_ASYNC	0x00000000	/* ASDO Pin = 0 */
-#define EP93XX_SDCE3_PHYS_BASE_SYNC	0x00000000	/* ASDO Pin = 1 */
-#define EP93XX_CS1_PHYS_BASE		0x10000000
-#define EP93XX_CS2_PHYS_BASE		0x20000000
-#define EP93XX_CS3_PHYS_BASE		0x30000000
-#define EP93XX_PCMCIA_PHYS_BASE		0x40000000
-#define EP93XX_CS6_PHYS_BASE		0x60000000
-#define EP93XX_CS7_PHYS_BASE		0x70000000
-#define EP93XX_SDCE0_PHYS_BASE		0xc0000000
-#define EP93XX_SDCE1_PHYS_BASE		0xd0000000
-#define EP93XX_SDCE2_PHYS_BASE		0xe0000000
-#define EP93XX_SDCE3_PHYS_BASE_ASYNC	0xf0000000	/* ASDO Pin = 0 */
-#define EP93XX_CS0_PHYS_BASE_SYNC	0xf0000000	/* ASDO Pin = 1 */
-
-/* AHB peripherals */
-#define EP93XX_DMA_BASE			EP93XX_AHB_IOMEM(0x00000000)
-
-#define EP93XX_ETHERNET_PHYS_BASE	EP93XX_AHB_PHYS(0x00010000)
-#define EP93XX_ETHERNET_BASE		EP93XX_AHB_IOMEM(0x00010000)
-
-#define EP93XX_USB_PHYS_BASE		EP93XX_AHB_PHYS(0x00020000)
-#define EP93XX_USB_BASE			EP93XX_AHB_IOMEM(0x00020000)
-
-#define EP93XX_RASTER_PHYS_BASE		EP93XX_AHB_PHYS(0x00030000)
-#define EP93XX_RASTER_BASE		EP93XX_AHB_IOMEM(0x00030000)
-
-#define EP93XX_GRAPHICS_ACCEL_BASE	EP93XX_AHB_IOMEM(0x00040000)
-
-#define EP93XX_SDRAM_CONTROLLER_BASE	EP93XX_AHB_IOMEM(0x00060000)
-
-#define EP93XX_PCMCIA_CONTROLLER_BASE	EP93XX_AHB_IOMEM(0x00080000)
-
-#define EP93XX_BOOT_ROM_BASE		EP93XX_AHB_IOMEM(0x00090000)
-
-#define EP93XX_IDE_PHYS_BASE		EP93XX_AHB_PHYS(0x000a0000)
-#define EP93XX_IDE_BASE			EP93XX_AHB_IOMEM(0x000a0000)
-
-#define EP93XX_VIC1_BASE		EP93XX_AHB_IOMEM(0x000b0000)
-
-#define EP93XX_VIC2_BASE		EP93XX_AHB_IOMEM(0x000c0000)
-
-/* APB peripherals */
-#define EP93XX_TIMER_BASE		EP93XX_APB_IOMEM(0x00010000)
-
-#define EP93XX_I2S_PHYS_BASE		EP93XX_APB_PHYS(0x00020000)
-#define EP93XX_I2S_BASE			EP93XX_APB_IOMEM(0x00020000)
-
-#define EP93XX_SECURITY_BASE		EP93XX_APB_IOMEM(0x00030000)
-
-#define EP93XX_AAC_PHYS_BASE		EP93XX_APB_PHYS(0x00080000)
-#define EP93XX_AAC_BASE			EP93XX_APB_IOMEM(0x00080000)
-
-#define EP93XX_SPI_PHYS_BASE		EP93XX_APB_PHYS(0x000a0000)
-#define EP93XX_SPI_BASE			EP93XX_APB_IOMEM(0x000a0000)
-
-#define EP93XX_IRDA_BASE		EP93XX_APB_IOMEM(0x000b0000)
-
-#define EP93XX_KEY_MATRIX_PHYS_BASE	EP93XX_APB_PHYS(0x000f0000)
-#define EP93XX_KEY_MATRIX_BASE		EP93XX_APB_IOMEM(0x000f0000)
-
-#define EP93XX_ADC_PHYS_BASE		EP93XX_APB_PHYS(0x00100000)
-#define EP93XX_ADC_BASE			EP93XX_APB_IOMEM(0x00100000)
-#define EP93XX_TOUCHSCREEN_BASE		EP93XX_APB_IOMEM(0x00100000)
-
-#define EP93XX_PWM_PHYS_BASE		EP93XX_APB_PHYS(0x00110000)
-#define EP93XX_PWM_BASE			EP93XX_APB_IOMEM(0x00110000)
-
-#define EP93XX_RTC_PHYS_BASE		EP93XX_APB_PHYS(0x00120000)
-#define EP93XX_RTC_BASE			EP93XX_APB_IOMEM(0x00120000)
-
-#define EP93XX_WATCHDOG_PHYS_BASE	EP93XX_APB_PHYS(0x00140000)
-#define EP93XX_WATCHDOG_BASE		EP93XX_APB_IOMEM(0x00140000)
-
-/* System controller */
-#define EP93XX_SYSCON_BASE		EP93XX_APB_IOMEM(0x00130000)
-#define EP93XX_SYSCON_REG(x)		(EP93XX_SYSCON_BASE + (x))
-#define EP93XX_SYSCON_POWER_STATE	EP93XX_SYSCON_REG(0x00)
-#define EP93XX_SYSCON_PWRCNT		EP93XX_SYSCON_REG(0x04)
-#define EP93XX_SYSCON_PWRCNT_FIR_EN	(1<<31)
-#define EP93XX_SYSCON_PWRCNT_UARTBAUD	(1<<29)
-#define EP93XX_SYSCON_PWRCNT_USH_EN	28
-#define EP93XX_SYSCON_PWRCNT_DMA_M2M1	27
-#define EP93XX_SYSCON_PWRCNT_DMA_M2M0	26
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P8	25
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P9	24
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P6	23
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P7	22
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P4	21
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P5	20
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P2	19
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P3	18
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P0	17
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P1	16
-#define EP93XX_SYSCON_HALT		EP93XX_SYSCON_REG(0x08)
-#define EP93XX_SYSCON_STANDBY		EP93XX_SYSCON_REG(0x0c)
-#define EP93XX_SYSCON_CLKSET1		EP93XX_SYSCON_REG(0x20)
-#define EP93XX_SYSCON_CLKSET1_NBYP1	(1<<23)
-#define EP93XX_SYSCON_CLKSET2		EP93XX_SYSCON_REG(0x24)
-#define EP93XX_SYSCON_CLKSET2_NBYP2	(1<<19)
-#define EP93XX_SYSCON_CLKSET2_PLL2_EN	(1<<18)
-#define EP93XX_SYSCON_DEVCFG		EP93XX_SYSCON_REG(0x80)
-#define EP93XX_SYSCON_DEVCFG_SWRST	(1<<31)
-#define EP93XX_SYSCON_DEVCFG_D1ONG	(1<<30)
-#define EP93XX_SYSCON_DEVCFG_D0ONG	(1<<29)
-#define EP93XX_SYSCON_DEVCFG_IONU2	(1<<28)
-#define EP93XX_SYSCON_DEVCFG_GONK	(1<<27)
-#define EP93XX_SYSCON_DEVCFG_TONG	(1<<26)
-#define EP93XX_SYSCON_DEVCFG_MONG	(1<<25)
-#define EP93XX_SYSCON_DEVCFG_U3EN	24
-#define EP93XX_SYSCON_DEVCFG_CPENA	(1<<23)
-#define EP93XX_SYSCON_DEVCFG_A2ONG	(1<<22)
-#define EP93XX_SYSCON_DEVCFG_A1ONG	(1<<21)
-#define EP93XX_SYSCON_DEVCFG_U2EN	20
-#define EP93XX_SYSCON_DEVCFG_EXVC	(1<<19)
-#define EP93XX_SYSCON_DEVCFG_U1EN	18
-#define EP93XX_SYSCON_DEVCFG_TIN	(1<<17)
-#define EP93XX_SYSCON_DEVCFG_HC3IN	(1<<15)
-#define EP93XX_SYSCON_DEVCFG_HC3EN	(1<<14)
-#define EP93XX_SYSCON_DEVCFG_HC1IN	(1<<13)
-#define EP93XX_SYSCON_DEVCFG_HC1EN	(1<<12)
-#define EP93XX_SYSCON_DEVCFG_HONIDE	(1<<11)
-#define EP93XX_SYSCON_DEVCFG_GONIDE	(1<<10)
-#define EP93XX_SYSCON_DEVCFG_PONG	(1<<9)
-#define EP93XX_SYSCON_DEVCFG_EONIDE	(1<<8)
-#define EP93XX_SYSCON_DEVCFG_I2SONSSP	(1<<7)
-#define EP93XX_SYSCON_DEVCFG_I2SONAC97	(1<<6)
-#define EP93XX_SYSCON_DEVCFG_RASONP3	(1<<4)
-#define EP93XX_SYSCON_DEVCFG_RAS	(1<<3)
-#define EP93XX_SYSCON_DEVCFG_ADCPD	(1<<2)
-#define EP93XX_SYSCON_DEVCFG_KEYS	(1<<1)
-#define EP93XX_SYSCON_DEVCFG_SHENA	(1<<0)
-#define EP93XX_SYSCON_VIDCLKDIV		EP93XX_SYSCON_REG(0x84)
-#define EP93XX_SYSCON_CLKDIV_ENABLE	15
-#define EP93XX_SYSCON_CLKDIV_ESEL	(1<<14)
-#define EP93XX_SYSCON_CLKDIV_PSEL	(1<<13)
-#define EP93XX_SYSCON_CLKDIV_PDIV_SHIFT	8
-#define EP93XX_SYSCON_I2SCLKDIV		EP93XX_SYSCON_REG(0x8c)
-#define EP93XX_SYSCON_I2SCLKDIV_SENA	31
-#define EP93XX_SYSCON_I2SCLKDIV_ORIDE   (1<<29)
-#define EP93XX_SYSCON_I2SCLKDIV_SPOL	(1<<19)
-#define EP93XX_I2SCLKDIV_SDIV		(1 << 16)
-#define EP93XX_I2SCLKDIV_LRDIV32	(0 << 17)
-#define EP93XX_I2SCLKDIV_LRDIV64	(1 << 17)
-#define EP93XX_I2SCLKDIV_LRDIV128	(2 << 17)
-#define EP93XX_I2SCLKDIV_LRDIV_MASK	(3 << 17)
-#define EP93XX_SYSCON_KEYTCHCLKDIV	EP93XX_SYSCON_REG(0x90)
-#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN	31
-#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV	16
-#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN	15
-#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV	(1<<0)
-#define EP93XX_SYSCON_SYSCFG		EP93XX_SYSCON_REG(0x9c)
-#define EP93XX_SYSCON_SYSCFG_REV_MASK	(0xf0000000)
-#define EP93XX_SYSCON_SYSCFG_REV_SHIFT	(28)
-#define EP93XX_SYSCON_SYSCFG_SBOOT	(1<<8)
-#define EP93XX_SYSCON_SYSCFG_LCSN7	(1<<7)
-#define EP93XX_SYSCON_SYSCFG_LCSN6	(1<<6)
-#define EP93XX_SYSCON_SYSCFG_LASDO	(1<<5)
-#define EP93XX_SYSCON_SYSCFG_LEEDA	(1<<4)
-#define EP93XX_SYSCON_SYSCFG_LEECLK	(1<<3)
-#define EP93XX_SYSCON_SYSCFG_LCSN2	(1<<1)
-#define EP93XX_SYSCON_SYSCFG_LCSN1	(1<<0)
-#define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
-
-/* EP93xx System Controller software locked register write */
-void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg);
-void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits);
-
-static inline void ep93xx_devcfg_set_bits(unsigned int bits)
-{
-	ep93xx_devcfg_set_clear(bits, 0x00);
-}
-
-static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
-{
-	ep93xx_devcfg_set_clear(0x00, bits);
-}
-
-#endif /* _EP93XX_SOC_H */
diff --git a/arch/arm/mach-ep93xx/timer-ep93xx.c b/arch/arm/mach-ep93xx/timer-ep93xx.c
deleted file mode 100644
index dd4b164d1831..000000000000
--- a/arch/arm/mach-ep93xx/timer-ep93xx.c
+++ /dev/null
@@ -1,142 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/sched_clock.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <asm/mach/time.h>
-#include "soc.h"
-
-/*************************************************************************
- * Timer handling for EP93xx
- *************************************************************************
- * The ep93xx has four internal timers.  Timers 1, 2 (both 16 bit) and
- * 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate
- * an interrupt on underflow.  Timer 4 (40 bit) counts down at 983.04 kHz,
- * is free-running, and can't generate interrupts.
- *
- * The 508 kHz timers are ideal for use for the timer interrupt, as the
- * most common values of HZ divide 508 kHz nicely.  We pick the 32 bit
- * timer (timer 3) to get as long sleep intervals as possible when using
- * CONFIG_NO_HZ.
- *
- * The higher clock rate of timer 4 makes it a better choice than the
- * other timers for use as clock source and for sched_clock(), providing
- * a stable 40 bit time base.
- *************************************************************************
- */
-#define EP93XX_TIMER_REG(x)		(EP93XX_TIMER_BASE + (x))
-#define EP93XX_TIMER1_LOAD		EP93XX_TIMER_REG(0x00)
-#define EP93XX_TIMER1_VALUE		EP93XX_TIMER_REG(0x04)
-#define EP93XX_TIMER1_CONTROL		EP93XX_TIMER_REG(0x08)
-#define EP93XX_TIMER123_CONTROL_ENABLE	(1 << 7)
-#define EP93XX_TIMER123_CONTROL_MODE	(1 << 6)
-#define EP93XX_TIMER123_CONTROL_CLKSEL	(1 << 3)
-#define EP93XX_TIMER1_CLEAR		EP93XX_TIMER_REG(0x0c)
-#define EP93XX_TIMER2_LOAD		EP93XX_TIMER_REG(0x20)
-#define EP93XX_TIMER2_VALUE		EP93XX_TIMER_REG(0x24)
-#define EP93XX_TIMER2_CONTROL		EP93XX_TIMER_REG(0x28)
-#define EP93XX_TIMER2_CLEAR		EP93XX_TIMER_REG(0x2c)
-#define EP93XX_TIMER4_VALUE_LOW		EP93XX_TIMER_REG(0x60)
-#define EP93XX_TIMER4_VALUE_HIGH	EP93XX_TIMER_REG(0x64)
-#define EP93XX_TIMER4_VALUE_HIGH_ENABLE	(1 << 8)
-#define EP93XX_TIMER3_LOAD		EP93XX_TIMER_REG(0x80)
-#define EP93XX_TIMER3_VALUE		EP93XX_TIMER_REG(0x84)
-#define EP93XX_TIMER3_CONTROL		EP93XX_TIMER_REG(0x88)
-#define EP93XX_TIMER3_CLEAR		EP93XX_TIMER_REG(0x8c)
-
-#define EP93XX_TIMER123_RATE		508469
-#define EP93XX_TIMER4_RATE		983040
-
-static u64 notrace ep93xx_read_sched_clock(void)
-{
-	u64 ret;
-
-	ret = readl(EP93XX_TIMER4_VALUE_LOW);
-	ret |= ((u64) (readl(EP93XX_TIMER4_VALUE_HIGH) & 0xff) << 32);
-	return ret;
-}
-
-u64 ep93xx_clocksource_read(struct clocksource *c)
-{
-	u64 ret;
-
-	ret = readl(EP93XX_TIMER4_VALUE_LOW);
-	ret |= ((u64) (readl(EP93XX_TIMER4_VALUE_HIGH) & 0xff) << 32);
-	return (u64) ret;
-}
-
-static int ep93xx_clkevt_set_next_event(unsigned long next,
-					struct clock_event_device *evt)
-{
-	/* Default mode: periodic, off, 508 kHz */
-	u32 tmode = EP93XX_TIMER123_CONTROL_MODE |
-		    EP93XX_TIMER123_CONTROL_CLKSEL;
-
-	/* Clear timer */
-	writel(tmode, EP93XX_TIMER3_CONTROL);
-
-	/* Set next event */
-	writel(next, EP93XX_TIMER3_LOAD);
-	writel(tmode | EP93XX_TIMER123_CONTROL_ENABLE,
-	       EP93XX_TIMER3_CONTROL);
-        return 0;
-}
-
-
-static int ep93xx_clkevt_shutdown(struct clock_event_device *evt)
-{
-	/* Disable timer */
-	writel(0, EP93XX_TIMER3_CONTROL);
-
-	return 0;
-}
-
-static struct clock_event_device ep93xx_clockevent = {
-	.name			= "timer1",
-	.features		= CLOCK_EVT_FEAT_ONESHOT,
-	.set_state_shutdown	= ep93xx_clkevt_shutdown,
-	.set_state_oneshot	= ep93xx_clkevt_shutdown,
-	.tick_resume		= ep93xx_clkevt_shutdown,
-	.set_next_event		= ep93xx_clkevt_set_next_event,
-	.rating			= 300,
-};
-
-static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
-
-	/* Writing any value clears the timer interrupt */
-	writel(1, EP93XX_TIMER3_CLEAR);
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-void __init ep93xx_timer_init(void)
-{
-	int irq = IRQ_EP93XX_TIMER3;
-	unsigned long flags = IRQF_TIMER | IRQF_IRQPOLL;
-
-	/* Enable and register clocksource and sched_clock on timer 4 */
-	writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE,
-	       EP93XX_TIMER4_VALUE_HIGH);
-	clocksource_mmio_init(NULL, "timer4",
-			      EP93XX_TIMER4_RATE, 200, 40,
-			      ep93xx_clocksource_read);
-	sched_clock_register(ep93xx_read_sched_clock, 40,
-			     EP93XX_TIMER4_RATE);
-
-	/* Set up clockevent on timer 3 */
-	if (request_irq(irq, ep93xx_timer_interrupt, flags, "ep93xx timer",
-			&ep93xx_clockevent))
-		pr_err("Failed to request irq %d (ep93xx timer)\n", irq);
-	clockevents_config_and_register(&ep93xx_clockevent,
-					EP93XX_TIMER123_RATE,
-					1,
-					0xffffffffU);
-}
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
deleted file mode 100644
index 0bbdf587c685..000000000000
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ /dev/null
@@ -1,422 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/ts72xx.c
- * Technologic Systems TS72xx SBC support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/mtd/platnand.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/mmc_spi.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_data/spi-ep93xx.h>
-#include <linux/gpio/machine.h>
-
-#include "gpio-ep93xx.h"
-#include "hardware.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-#include "ts72xx.h"
-
-/*************************************************************************
- * IO map
- *************************************************************************/
-static struct map_desc ts72xx_io_desc[] __initdata = {
-	{
-		.virtual	= (unsigned long)TS72XX_MODEL_VIRT_BASE,
-		.pfn		= __phys_to_pfn(TS72XX_MODEL_PHYS_BASE),
-		.length		= TS72XX_MODEL_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)TS72XX_OPTIONS_VIRT_BASE,
-		.pfn		= __phys_to_pfn(TS72XX_OPTIONS_PHYS_BASE),
-		.length		= TS72XX_OPTIONS_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)TS72XX_OPTIONS2_VIRT_BASE,
-		.pfn		= __phys_to_pfn(TS72XX_OPTIONS2_PHYS_BASE),
-		.length		= TS72XX_OPTIONS2_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)TS72XX_CPLDVER_VIRT_BASE,
-		.pfn		= __phys_to_pfn(TS72XX_CPLDVER_PHYS_BASE),
-		.length		= TS72XX_CPLDVER_SIZE,
-		.type		= MT_DEVICE,
-	}
-};
-
-static void __init ts72xx_map_io(void)
-{
-	ep93xx_map_io();
-	iotable_init(ts72xx_io_desc, ARRAY_SIZE(ts72xx_io_desc));
-}
-
-
-/*************************************************************************
- * NAND flash
- *************************************************************************/
-#define TS72XX_NAND_CONTROL_ADDR_LINE	22	/* 0xN0400000 */
-#define TS72XX_NAND_BUSY_ADDR_LINE	23	/* 0xN0800000 */
-
-static void ts72xx_nand_hwcontrol(struct nand_chip *chip,
-				  int cmd, unsigned int ctrl)
-{
-	if (ctrl & NAND_CTRL_CHANGE) {
-		void __iomem *addr = chip->legacy.IO_ADDR_R;
-		unsigned char bits;
-
-		addr += (1 << TS72XX_NAND_CONTROL_ADDR_LINE);
-
-		bits = __raw_readb(addr) & ~0x07;
-		bits |= (ctrl & NAND_NCE) << 2;	/* bit 0 -> bit 2 */
-		bits |= (ctrl & NAND_CLE);	/* bit 1 -> bit 1 */
-		bits |= (ctrl & NAND_ALE) >> 2;	/* bit 2 -> bit 0 */
-
-		__raw_writeb(bits, addr);
-	}
-
-	if (cmd != NAND_CMD_NONE)
-		__raw_writeb(cmd, chip->legacy.IO_ADDR_W);
-}
-
-static int ts72xx_nand_device_ready(struct nand_chip *chip)
-{
-	void __iomem *addr = chip->legacy.IO_ADDR_R;
-
-	addr += (1 << TS72XX_NAND_BUSY_ADDR_LINE);
-
-	return !!(__raw_readb(addr) & 0x20);
-}
-
-#define TS72XX_BOOTROM_PART_SIZE	(SZ_16K)
-#define TS72XX_REDBOOT_PART_SIZE	(SZ_2M + SZ_1M)
-
-static struct mtd_partition ts72xx_nand_parts[] = {
-	{
-		.name		= "TS-BOOTROM",
-		.offset		= 0,
-		.size		= TS72XX_BOOTROM_PART_SIZE,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	}, {
-		.name		= "Linux",
-		.offset		= MTDPART_OFS_RETAIN,
-		.size		= TS72XX_REDBOOT_PART_SIZE,
-				/* leave so much for last partition */
-	}, {
-		.name		= "RedBoot",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-};
-
-static struct platform_nand_data ts72xx_nand_data = {
-	.chip = {
-		.nr_chips	= 1,
-		.chip_offset	= 0,
-		.chip_delay	= 15,
-	},
-	.ctrl = {
-		.cmd_ctrl	= ts72xx_nand_hwcontrol,
-		.dev_ready	= ts72xx_nand_device_ready,
-	},
-};
-
-static struct resource ts72xx_nand_resource[] = {
-	{
-		.start		= 0,			/* filled in later */
-		.end		= 0,			/* filled in later */
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device ts72xx_nand_flash = {
-	.name			= "gen_nand",
-	.id			= -1,
-	.dev.platform_data	= &ts72xx_nand_data,
-	.resource		= ts72xx_nand_resource,
-	.num_resources		= ARRAY_SIZE(ts72xx_nand_resource),
-};
-
-static void __init ts72xx_register_flash(struct mtd_partition *parts, int n,
-				  resource_size_t start)
-{
-	/*
-	 * TS7200 has NOR flash all other TS72xx board have NAND flash.
-	 */
-	if (board_is_ts7200()) {
-		ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
-	} else {
-		ts72xx_nand_resource[0].start = start;
-		ts72xx_nand_resource[0].end = start + SZ_16M - 1;
-
-		ts72xx_nand_data.chip.partitions = parts;
-		ts72xx_nand_data.chip.nr_partitions = n;
-
-		platform_device_register(&ts72xx_nand_flash);
-	}
-}
-
-/*************************************************************************
- * RTC M48T86
- *************************************************************************/
-#define TS72XX_RTC_INDEX_PHYS_BASE	(EP93XX_CS1_PHYS_BASE + 0x00800000)
-#define TS72XX_RTC_DATA_PHYS_BASE	(EP93XX_CS1_PHYS_BASE + 0x01700000)
-
-static struct resource ts72xx_rtc_resources[] = {
-	DEFINE_RES_MEM(TS72XX_RTC_INDEX_PHYS_BASE, 0x01),
-	DEFINE_RES_MEM(TS72XX_RTC_DATA_PHYS_BASE, 0x01),
-};
-
-static struct platform_device ts72xx_rtc_device = {
-	.name		= "rtc-m48t86",
-	.id		= -1,
-	.resource	= ts72xx_rtc_resources,
-	.num_resources 	= ARRAY_SIZE(ts72xx_rtc_resources),
-};
-
-/*************************************************************************
- * Watchdog (in CPLD)
- *************************************************************************/
-#define TS72XX_WDT_CONTROL_PHYS_BASE	(EP93XX_CS2_PHYS_BASE + 0x03800000)
-#define TS72XX_WDT_FEED_PHYS_BASE	(EP93XX_CS2_PHYS_BASE + 0x03c00000)
-
-static struct resource ts72xx_wdt_resources[] = {
-	DEFINE_RES_MEM(TS72XX_WDT_CONTROL_PHYS_BASE, 0x01),
-	DEFINE_RES_MEM(TS72XX_WDT_FEED_PHYS_BASE, 0x01),
-};
-
-static struct platform_device ts72xx_wdt_device = {
-	.name		= "ts72xx-wdt",
-	.id		= -1,
-	.resource	= ts72xx_wdt_resources,
-	.num_resources	= ARRAY_SIZE(ts72xx_wdt_resources),
-};
-
-/*************************************************************************
- * ETH
- *************************************************************************/
-static struct ep93xx_eth_data __initdata ts72xx_eth_data = {
-	.phy_id		= 1,
-};
-
-/*************************************************************************
- * SPI SD/MMC host
- *************************************************************************/
-#define BK3_EN_SDCARD_PHYS_BASE         0x12400000
-#define BK3_EN_SDCARD_PWR 0x0
-#define BK3_DIS_SDCARD_PWR 0x0C
-static void bk3_mmc_spi_setpower(struct device *dev, unsigned int vdd)
-{
-	void __iomem *pwr_sd = ioremap(BK3_EN_SDCARD_PHYS_BASE, SZ_4K);
-
-	if (!pwr_sd) {
-		pr_err("Failed to enable SD card power!");
-		return;
-	}
-
-	pr_debug("%s: SD card pwr %s VDD:0x%x\n", __func__,
-		 !!vdd ? "ON" : "OFF", vdd);
-
-	if (!!vdd)
-		__raw_writeb(BK3_EN_SDCARD_PWR, pwr_sd);
-	else
-		__raw_writeb(BK3_DIS_SDCARD_PWR, pwr_sd);
-
-	iounmap(pwr_sd);
-}
-
-static struct mmc_spi_platform_data bk3_spi_mmc_data = {
-	.detect_delay	= 500,
-	.powerup_msecs	= 100,
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.caps		= MMC_CAP_NONREMOVABLE,
-	.setpower       = bk3_mmc_spi_setpower,
-};
-
-/*************************************************************************
- * SPI Bus - SD card access
- *************************************************************************/
-static struct spi_board_info bk3_spi_board_info[] __initdata = {
-	{
-		.modalias		= "mmc_spi",
-		.platform_data		= &bk3_spi_mmc_data,
-		.max_speed_hz		= 7.4E6,
-		.bus_num		= 0,
-		.chip_select		= 0,
-		.mode			= SPI_MODE_0,
-	},
-};
-
-/*
- * This is a stub -> the FGPIO[3] pin is not connected on the schematic
- * The all work is performed automatically by !SPI_FRAME (SFRM1) and
- * goes through CPLD
- */
-static struct gpiod_lookup_table bk3_spi_cs_gpio_table = {
-	.dev_id = "spi0",
-	.table = {
-		GPIO_LOOKUP("gpio-ep93xx.5", 3, "cs", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct ep93xx_spi_info bk3_spi_master __initdata = {
-	.use_dma	= 1,
-};
-
-/*************************************************************************
- * TS72XX support code
- *************************************************************************/
-#if IS_ENABLED(CONFIG_FPGA_MGR_TS73XX)
-
-/* Relative to EP93XX_CS1_PHYS_BASE */
-#define TS73XX_FPGA_LOADER_BASE		0x03c00000
-
-static struct resource ts73xx_fpga_resources[] = {
-	{
-		.start	= EP93XX_CS1_PHYS_BASE + TS73XX_FPGA_LOADER_BASE,
-		.end	= EP93XX_CS1_PHYS_BASE + TS73XX_FPGA_LOADER_BASE + 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device ts73xx_fpga_device = {
-	.name	= "ts73xx-fpga-mgr",
-	.id	= -1,
-	.resource = ts73xx_fpga_resources,
-	.num_resources = ARRAY_SIZE(ts73xx_fpga_resources),
-};
-
-#endif
-
-/*************************************************************************
- * SPI Bus
- *************************************************************************/
-static struct spi_board_info ts72xx_spi_devices[] __initdata = {
-	{
-		.modalias		= "tmp122",
-		.max_speed_hz		= 2 * 1000 * 1000,
-		.bus_num		= 0,
-		.chip_select		= 0,
-	},
-};
-
-static struct gpiod_lookup_table ts72xx_spi_cs_gpio_table = {
-	.dev_id = "spi0",
-	.table = {
-		/* DIO_17 */
-		GPIO_LOOKUP("gpio-ep93xx.5", 2, "cs", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct ep93xx_spi_info ts72xx_spi_info __initdata = {
-	/* Intentionally left blank */
-};
-
-static void __init ts72xx_init_machine(void)
-{
-	ep93xx_init_devices();
-	ts72xx_register_flash(ts72xx_nand_parts, ARRAY_SIZE(ts72xx_nand_parts),
-			      is_ts9420_installed() ?
-			      EP93XX_CS7_PHYS_BASE : EP93XX_CS6_PHYS_BASE);
-	platform_device_register(&ts72xx_rtc_device);
-	platform_device_register(&ts72xx_wdt_device);
-
-	ep93xx_register_eth(&ts72xx_eth_data, 1);
-#if IS_ENABLED(CONFIG_FPGA_MGR_TS73XX)
-	if (board_is_ts7300())
-		platform_device_register(&ts73xx_fpga_device);
-#endif
-	gpiod_add_lookup_table(&ts72xx_spi_cs_gpio_table);
-	ep93xx_register_spi(&ts72xx_spi_info, ts72xx_spi_devices,
-			    ARRAY_SIZE(ts72xx_spi_devices));
-}
-
-MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ts72xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= ts72xx_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-
-/*************************************************************************
- * EP93xx I2S audio peripheral handling
- *************************************************************************/
-static struct resource ep93xx_i2s_resource[] = {
-	DEFINE_RES_MEM(EP93XX_I2S_PHYS_BASE, 0x100),
-	DEFINE_RES_IRQ_NAMED(IRQ_EP93XX_SAI, "spilink i2s slave"),
-};
-
-static struct platform_device ep93xx_i2s_device = {
-	.name		= "ep93xx-spilink-i2s",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(ep93xx_i2s_resource),
-	.resource	= ep93xx_i2s_resource,
-};
-
-/*************************************************************************
- * BK3 support code
- *************************************************************************/
-static struct mtd_partition bk3_nand_parts[] = {
-	{
-		.name		= "System",
-		.offset	= 0x00000000,
-		.size		= 0x01e00000,
-	}, {
-		.name		= "Data",
-		.offset	= 0x01e00000,
-		.size		= 0x05f20000
-	}, {
-		.name		= "RedBoot",
-		.offset	= 0x07d20000,
-		.size		= 0x002e0000,
-		.mask_flags	= MTD_WRITEABLE,	/* force RO */
-	},
-};
-
-static void __init bk3_init_machine(void)
-{
-	ep93xx_init_devices();
-
-	ts72xx_register_flash(bk3_nand_parts, ARRAY_SIZE(bk3_nand_parts),
-			      EP93XX_CS6_PHYS_BASE);
-
-	ep93xx_register_eth(&ts72xx_eth_data, 1);
-
-	gpiod_add_lookup_table(&bk3_spi_cs_gpio_table);
-	ep93xx_register_spi(&bk3_spi_master, bk3_spi_board_info,
-			    ARRAY_SIZE(bk3_spi_board_info));
-
-	/* Configure ep93xx's I2S to use AC97 pins */
-	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_I2SONAC97);
-	platform_device_register(&ep93xx_i2s_device);
-}
-
-MACHINE_START(BK3, "Liebherr controller BK3.1")
-	/* Maintainer: Lukasz Majewski <lukma@denx.de> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ts72xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= bk3_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/ts72xx.h b/arch/arm/mach-ep93xx/ts72xx.h
deleted file mode 100644
index 00b4941d29c9..000000000000
--- a/arch/arm/mach-ep93xx/ts72xx.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-ep93xx/include/mach/ts72xx.h
- */
-
-/*
- * TS72xx memory map:
- *
- * virt		phys		size
- * febff000	22000000	4K	model number register (bits 0-2)
- * febfe000	22400000	4K	options register
- * febfd000	22800000	4K	options register #2
- * febfc000     23400000        4K      CPLD version register
- */
-
-#ifndef __TS72XX_H_
-#define __TS72XX_H_
-
-#define TS72XX_MODEL_PHYS_BASE		0x22000000
-#define TS72XX_MODEL_VIRT_BASE		IOMEM(0xfebff000)
-#define TS72XX_MODEL_SIZE		0x00001000
-
-#define TS72XX_MODEL_TS7200		0x00
-#define TS72XX_MODEL_TS7250		0x01
-#define TS72XX_MODEL_TS7260		0x02
-#define TS72XX_MODEL_TS7300		0x03
-#define TS72XX_MODEL_TS7400		0x04
-#define TS72XX_MODEL_MASK		0x07
-
-
-#define TS72XX_OPTIONS_PHYS_BASE	0x22400000
-#define TS72XX_OPTIONS_VIRT_BASE	IOMEM(0xfebfe000)
-#define TS72XX_OPTIONS_SIZE		0x00001000
-
-#define TS72XX_OPTIONS_COM2_RS485	0x02
-#define TS72XX_OPTIONS_MAX197		0x01
-
-
-#define TS72XX_OPTIONS2_PHYS_BASE	0x22800000
-#define TS72XX_OPTIONS2_VIRT_BASE	IOMEM(0xfebfd000)
-#define TS72XX_OPTIONS2_SIZE		0x00001000
-
-#define TS72XX_OPTIONS2_TS9420		0x04
-#define TS72XX_OPTIONS2_TS9420_BOOT	0x02
-
-#define TS72XX_CPLDVER_PHYS_BASE	0x23400000
-#define TS72XX_CPLDVER_VIRT_BASE	IOMEM(0xfebfc000)
-#define TS72XX_CPLDVER_SIZE		0x00001000
-
-#ifndef __ASSEMBLY__
-
-static inline int ts72xx_model(void)
-{
-	return __raw_readb(TS72XX_MODEL_VIRT_BASE) & TS72XX_MODEL_MASK;
-}
-
-static inline int board_is_ts7200(void)
-{
-	return ts72xx_model() == TS72XX_MODEL_TS7200;
-}
-
-static inline int board_is_ts7250(void)
-{
-	return ts72xx_model() == TS72XX_MODEL_TS7250;
-}
-
-static inline int board_is_ts7260(void)
-{
-	return ts72xx_model() == TS72XX_MODEL_TS7260;
-}
-
-static inline int board_is_ts7300(void)
-{
-	return ts72xx_model()  == TS72XX_MODEL_TS7300;
-}
-
-static inline int board_is_ts7400(void)
-{
-	return ts72xx_model() == TS72XX_MODEL_TS7400;
-}
-
-static inline int is_max197_installed(void)
-{
-	return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) &
-					TS72XX_OPTIONS_MAX197);
-}
-
-static inline int is_ts9420_installed(void)
-{
-	return !!(__raw_readb(TS72XX_OPTIONS2_VIRT_BASE) &
-					TS72XX_OPTIONS2_TS9420);
-}
-#endif
-#endif /* __TS72XX_H_ */
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
deleted file mode 100644
index 020223b0be2b..000000000000
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ /dev/null
@@ -1,311 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/vision_ep9307.c
- * Vision Engraving Systems EP9307 SoM support.
- *
- * Copyright (C) 2008-2011 Vision Engraving Systems
- * H Hartley Sweeten <hsweeten@visionengravers.com>
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/fb.h>
-#include <linux/io.h>
-#include <linux/mtd/partitions.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/mmc_spi.h>
-#include <linux/mmc/host.h>
-
-#include <sound/cs4271.h>
-
-#include "hardware.h"
-#include <linux/platform_data/video-ep93xx.h>
-#include <linux/platform_data/spi-ep93xx.h>
-#include "gpio-ep93xx.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-/*************************************************************************
- * Static I/O mappings for the FPGA
- *************************************************************************/
-#define VISION_PHYS_BASE	EP93XX_CS7_PHYS_BASE
-#define VISION_VIRT_BASE	0xfebff000
-
-static struct map_desc vision_io_desc[] __initdata = {
-	{
-		.virtual	= VISION_VIRT_BASE,
-		.pfn		= __phys_to_pfn(VISION_PHYS_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static void __init vision_map_io(void)
-{
-	ep93xx_map_io();
-
-	iotable_init(vision_io_desc, ARRAY_SIZE(vision_io_desc));
-}
-
-/*************************************************************************
- * Ethernet
- *************************************************************************/
-static struct ep93xx_eth_data vision_eth_data __initdata = {
-	.phy_id		= 1,
-};
-
-/*************************************************************************
- * Framebuffer
- *************************************************************************/
-#define VISION_LCD_ENABLE	EP93XX_GPIO_LINE_EGPIO1
-
-static int vision_lcd_setup(struct platform_device *pdev)
-{
-	int err;
-
-	err = gpio_request_one(VISION_LCD_ENABLE, GPIOF_INIT_HIGH,
-				dev_name(&pdev->dev));
-	if (err)
-		return err;
-
-	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_RAS |
-				 EP93XX_SYSCON_DEVCFG_RASONP3 |
-				 EP93XX_SYSCON_DEVCFG_EXVC);
-
-	return 0;
-}
-
-static void vision_lcd_teardown(struct platform_device *pdev)
-{
-	gpio_free(VISION_LCD_ENABLE);
-}
-
-static void vision_lcd_blank(int blank_mode, struct fb_info *info)
-{
-	if (blank_mode)
-		gpio_set_value(VISION_LCD_ENABLE, 0);
-	else
-		gpio_set_value(VISION_LCD_ENABLE, 1);
-}
-
-static struct ep93xxfb_mach_info ep93xxfb_info __initdata = {
-	.flags		= EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
-	.setup		= vision_lcd_setup,
-	.teardown	= vision_lcd_teardown,
-	.blank		= vision_lcd_blank,
-};
-
-
-/*************************************************************************
- * GPIO Expanders
- *************************************************************************/
-#define PCA9539_74_GPIO_BASE	(EP93XX_GPIO_LINE_MAX + 1)
-#define PCA9539_75_GPIO_BASE	(PCA9539_74_GPIO_BASE + 16)
-#define PCA9539_76_GPIO_BASE	(PCA9539_75_GPIO_BASE + 16)
-#define PCA9539_77_GPIO_BASE	(PCA9539_76_GPIO_BASE + 16)
-
-static struct pca953x_platform_data pca953x_74_gpio_data = {
-	.gpio_base	= PCA9539_74_GPIO_BASE,
-	.irq_base	= EP93XX_BOARD_IRQ(0),
-};
-
-static struct pca953x_platform_data pca953x_75_gpio_data = {
-	.gpio_base	= PCA9539_75_GPIO_BASE,
-	.irq_base	= -1,
-};
-
-static struct pca953x_platform_data pca953x_76_gpio_data = {
-	.gpio_base	= PCA9539_76_GPIO_BASE,
-	.irq_base	= -1,
-};
-
-static struct pca953x_platform_data pca953x_77_gpio_data = {
-	.gpio_base	= PCA9539_77_GPIO_BASE,
-	.irq_base	= -1,
-};
-
-/*************************************************************************
- * I2C Bus
- *************************************************************************/
-
-static struct i2c_board_info vision_i2c_info[] __initdata = {
-	{
-		I2C_BOARD_INFO("isl1208", 0x6f),
-		.irq		= IRQ_EP93XX_EXT1,
-	}, {
-		I2C_BOARD_INFO("pca9539", 0x74),
-		.platform_data	= &pca953x_74_gpio_data,
-	}, {
-		I2C_BOARD_INFO("pca9539", 0x75),
-		.platform_data	= &pca953x_75_gpio_data,
-	}, {
-		I2C_BOARD_INFO("pca9539", 0x76),
-		.platform_data	= &pca953x_76_gpio_data,
-	}, {
-		I2C_BOARD_INFO("pca9539", 0x77),
-		.platform_data	= &pca953x_77_gpio_data,
-	},
-};
-
-/*************************************************************************
- * SPI CS4271 Audio Codec
- *************************************************************************/
-static struct cs4271_platform_data vision_cs4271_data = {
-	.gpio_nreset	= EP93XX_GPIO_LINE_H(2),
-};
-
-/*************************************************************************
- * SPI Flash
- *************************************************************************/
-static struct mtd_partition vision_spi_flash_partitions[] = {
-	{
-		.name	= "SPI bootstrap",
-		.offset	= 0,
-		.size	= SZ_4K,
-	}, {
-		.name	= "Bootstrap config",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= SZ_4K,
-	}, {
-		.name	= "System config",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct flash_platform_data vision_spi_flash_data = {
-	.name		= "SPI Flash",
-	.parts		= vision_spi_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(vision_spi_flash_partitions),
-};
-
-/*************************************************************************
- * SPI SD/MMC host
- *************************************************************************/
-static struct mmc_spi_platform_data vision_spi_mmc_data = {
-	.detect_delay	= 100,
-	.powerup_msecs	= 100,
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.caps2		= MMC_CAP2_RO_ACTIVE_HIGH,
-};
-
-static struct gpiod_lookup_table vision_spi_mmc_gpio_table = {
-	.dev_id = "mmc_spi.2", /* "mmc_spi @ CS2 */
-	.table = {
-		/* Card detect */
-		GPIO_LOOKUP_IDX("gpio-ep93xx.1", 7, NULL, 0, GPIO_ACTIVE_LOW),
-		/* Write protect */
-		GPIO_LOOKUP_IDX("gpio-ep93xx.5", 0, NULL, 1, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/*************************************************************************
- * SPI Bus
- *************************************************************************/
-static struct spi_board_info vision_spi_board_info[] __initdata = {
-	{
-		.modalias		= "cs4271",
-		.platform_data		= &vision_cs4271_data,
-		.max_speed_hz		= 6000000,
-		.bus_num		= 0,
-		.chip_select		= 0,
-		.mode			= SPI_MODE_3,
-	}, {
-		.modalias		= "sst25l",
-		.platform_data		= &vision_spi_flash_data,
-		.max_speed_hz		= 20000000,
-		.bus_num		= 0,
-		.chip_select		= 1,
-		.mode			= SPI_MODE_3,
-	}, {
-		.modalias		= "mmc_spi",
-		.platform_data		= &vision_spi_mmc_data,
-		.max_speed_hz		= 20000000,
-		.bus_num		= 0,
-		.chip_select		= 2,
-		.mode			= SPI_MODE_3,
-	},
-};
-
-static struct gpiod_lookup_table vision_spi_cs_gpio_table = {
-	.dev_id = "spi0",
-	.table = {
-		GPIO_LOOKUP_IDX("gpio-ep93xx.0", 6, "cs", 0, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("gpio-ep93xx.0", 7, "cs", 1, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("gpio-ep93xx.6", 2, "cs", 2, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct ep93xx_spi_info vision_spi_master __initdata = {
-	.use_dma	= 1,
-};
-
-/*************************************************************************
- * I2S Audio
- *************************************************************************/
-static struct platform_device vision_audio_device = {
-	.name		= "edb93xx-audio",
-	.id		= -1,
-};
-
-static void __init vision_register_i2s(void)
-{
-	ep93xx_register_i2s();
-	platform_device_register(&vision_audio_device);
-}
-
-/*************************************************************************
- * Machine Initialization
- *************************************************************************/
-static void __init vision_init_machine(void)
-{
-	ep93xx_init_devices();
-	ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_64M);
-	ep93xx_register_eth(&vision_eth_data, 1);
-	ep93xx_register_fb(&ep93xxfb_info);
-	ep93xx_register_pwm(1, 0);
-
-	/*
-	 * Request the gpio expander's interrupt gpio line now to prevent
-	 * the kernel from doing a WARN in gpiolib:gpio_ensure_requested().
-	 */
-	if (gpio_request_one(EP93XX_GPIO_LINE_F(7), GPIOF_DIR_IN,
-				"pca9539:74"))
-		pr_warn("cannot request interrupt gpio for pca9539:74\n");
-
-	vision_i2c_info[1].irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7));
-
-	ep93xx_register_i2c(vision_i2c_info,
-				ARRAY_SIZE(vision_i2c_info));
-	gpiod_add_lookup_table(&vision_spi_mmc_gpio_table);
-	gpiod_add_lookup_table(&vision_spi_cs_gpio_table);
-	ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
-				ARRAY_SIZE(vision_spi_board_info));
-	vision_register_i2s();
-}
-
-MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
-	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS + EP93XX_BOARD_IRQS,
-	.map_io		= vision_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= vision_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
