[v3,1/3] dt-bindings: misc: esm: Add ESM support for TI K3 devices
Commit Message
Document the binding for TI K3 ESM (Error Signaling Module) block.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
---
.../bindings/hwmon/ti,j721e-esm.yaml | 53 +++++++++++++++++++
1 file changed, 53 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/ti,j721e-esm.yaml
Comments
On 24/04/2023 11:53, Neha Malcom Francis wrote:
> Document the binding for TI K3 ESM (Error Signaling Module) block.
>
> Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
> ---
> .../bindings/hwmon/ti,j721e-esm.yaml | 53 +++++++++++++++++++
> 1 file changed, 53 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/ti,j721e-esm.yaml
>
Use subject prefixes matching the subsystem (which you can get for
example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
your patch is touching). misc->hwmon
> diff --git a/Documentation/devicetree/bindings/hwmon/ti,j721e-esm.yaml b/Documentation/devicetree/bindings/hwmon/ti,j721e-esm.yaml
> new file mode 100644
> index 000000000000..c5eb7f46cc46
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/ti,j721e-esm.yaml
> @@ -0,0 +1,53 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) 2022 Texas Instruments Incorporated
> +%YAML 1.2
Best regards,
Krzysztof
new file mode 100644
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ti,j721e-esm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 ESM
+
+maintainers:
+ - Neha Malcom Francis <n-francis@ti.com>
+
+description:
+ The ESM (Error Signaling Module) is an IP block on TI K3 devices
+ that allows handling of safety events somewhat similar to what interrupt
+ controller would do. The safety signals have their separate paths within
+ the SoC, and they are handled by the ESM, which routes them to the proper
+ destination, which can be system reset, interrupt controller, etc. In the
+ simplest configuration the signals are just routed to reset the SoC.
+
+properties:
+ compatible:
+ const: ti,j721e-esm
+
+ reg:
+ maxItems: 1
+
+ ti,esm-pins:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ integer array of ESM interrupt pins to route to external event pin
+ which can be used to reset the SoC.
+ minItems: 1
+ maxItems: 255
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - ti,esm-pins
+
+examples:
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ esm@700000 {
+ compatible = "ti,j721e-esm";
+ reg = <0x0 0x700000 0x0 0x1000>;
+ ti,esm-pins = <344>, <345>;
+ };
+ };