diff mbox series

[v2,net-next,3/9] net: dpaa: avoid one skb_reset_mac_header() in dpaa_enable_tx_csum()

Message ID 20230420225601.2358327-4-vladimir.oltean@nxp.com
State New
Headers
Series Remove skb_mac_header() dependency in DSA xmit path |

Commit Message

Vladimir Oltean April 20, 2023, 10:55 p.m. UTC 
  It appears that dpaa_enable_tx_csum() only calls skb_reset_mac_header()
to get to the VLAN header using skb_mac_header().

We can use skb_vlan_eth_hdr() to get to the VLAN header based on
skb->data directly. This avoids spending a few cycles to set
skb->mac_header.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
Cc: Madalin Bucur <madalin.bucur@nxp.com>

 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

Comments

Madalin Bucur (OSS) April 21, 2023, 8:31 a.m. UTC | #1 
> -----Original Message-----
> From: Vladimir Oltean <vladimir.oltean@nxp.com>
> Sent: 21 April 2023 01:56
> To: netdev@vger.kernel.org
> Cc: David S. Miller <davem@davemloft.net>; Eric Dumazet
> <edumazet@google.com>; Jakub Kicinski <kuba@kernel.org>; Paolo Abeni
> <pabeni@redhat.com>; Andrew Lunn <andrew@lunn.ch>; Florian Fainelli
> <f.fainelli@gmail.com>; linux-kernel@vger.kernel.org; Simon Horman
> <simon.horman@corigine.com>; Madalin Bucur <madalin.bucur@nxp.com>
> Subject: [PATCH v2 net-next 3/9] net: dpaa: avoid one
> skb_reset_mac_header() in dpaa_enable_tx_csum()
> 
> It appears that dpaa_enable_tx_csum() only calls skb_reset_mac_header()
> to get to the VLAN header using skb_mac_header().
> 
> We can use skb_vlan_eth_hdr() to get to the VLAN header based on
> skb->data directly. This avoids spending a few cycles to set
> skb->mac_header.
> 
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
> Reviewed-by: Eric Dumazet <edumazet@google.com>
> Reviewed-by: Simon Horman <simon.horman@corigine.com>
> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
> Cc: Madalin Bucur <madalin.bucur@nxp.com>
> 
>  drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 9 ++-------
>  1 file changed, 2 insertions(+), 7 deletions(-)

Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
diff mbox series

Patch

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 9318a2554056..1fa676308c5e 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -1482,13 +1482,8 @@  static int dpaa_enable_tx_csum(struct dpaa_priv *priv,
 	parse_result = (struct fman_prs_result *)parse_results;
 
 	/* If we're dealing with VLAN, get the real Ethernet type */
-	if (ethertype == ETH_P_8021Q) {
-		/* We can't always assume the MAC header is set correctly
-		 * by the stack, so reset to beginning of skb->data
-		 */
-		skb_reset_mac_header(skb);
-		ethertype = ntohs(vlan_eth_hdr(skb)->h_vlan_encapsulated_proto);
-	}
+	if (ethertype == ETH_P_8021Q)
+		ethertype = ntohs(skb_vlan_eth_hdr(skb)->h_vlan_encapsulated_proto);
 
 	/* Fill in the relevant L3 parse result fields
 	 * and read the L4 protocol type