diff mbox series

[7/7] phy: sparx5-serdes: add skip_cmu_cfg check when configuring lanes

Message ID 20230417180335.2787494-8-daniel.machon@microchip.com
State New
Headers
Series Power down serdes lanes and CMUs initially |

Commit Message

Daniel Machon April 17, 2023, 6:03 p.m. UTC 
  Add a check for skip_cmu_cfg when configuring the serdes lane.  All
individual serdeses are reset upon first configuration. Resetting the
serdes involves reconfiguring it with preset values. The serdesmode is
required to determine the clock-providing CMU, therefore make sure the
serdes is not reconfigured if the serdesmode is not set.

Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
---
 drivers/phy/microchip/sparx5_serdes.c | 5 +++++
 1 file changed, 5 insertions(+)
diff mbox series

Patch

diff --git a/drivers/phy/microchip/sparx5_serdes.c b/drivers/phy/microchip/sparx5_serdes.c
index eb9352d1de7e..01bd5ea620c5 100644
--- a/drivers/phy/microchip/sparx5_serdes.c
+++ b/drivers/phy/microchip/sparx5_serdes.c
@@ -1646,6 +1646,10 @@  static int sparx5_sd10g28_apply_params(struct sparx5_serdes_macro *macro,
 	u32 value, cmu_idx;
 	int err;
 
+	/* Do not configure serdes if CMU is not to be configured too */
+	if (params->skip_cmu_cfg)
+		return 0;
+
 	cmu_idx = sparx5_serdes_cmu_get(params->cmu_sel, lane_index);
 	err = sparx5_cmu_cfg(priv, cmu_idx);
 	if (err)
@@ -2111,6 +2115,7 @@  static int sparx5_sd10g28_config(struct sparx5_serdes_macro *macro, bool reset)
 		.rxinvert = 1,
 		.txswing = 240,
 		.reg_rst = reset,
+		.skip_cmu_cfg = reset,
 	};
 	int err;