From: "H. Peter Anvin (Intel)" <hpa@zytor.com>
Add a header file for FRED prototypes and definitions.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Tested-by: Shan Kang <shan.kang@intel.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
---
Changes since v6:
* Replace pt_regs csx flags prefix FRED_CSL_ with FRED_CSX_.
---
arch/x86/include/asm/fred.h | 106 ++++++++++++++++++++++++++++++++++++
1 file changed, 106 insertions(+)
create mode 100644 arch/x86/include/asm/fred.h
new file mode 100644
@@ -0,0 +1,106 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/x86/include/asm/fred.h
+ *
+ * Macros for Flexible Return and Event Delivery (FRED)
+ */
+
+#ifndef ASM_X86_FRED_H
+#define ASM_X86_FRED_H
+
+#ifdef CONFIG_X86_FRED
+
+#include <linux/const.h>
+#include <asm/asm.h>
+
+/*
+ * FRED return instructions
+ *
+ * Replace with "ERETS"/"ERETU" once binutils support FRED return instructions.
+ * The binutils version supporting FRED instructions is still TBD, and will
+ * update once we have it.
+ */
+#define ERETS _ASM_BYTES(0xf2,0x0f,0x01,0xca)
+#define ERETU _ASM_BYTES(0xf3,0x0f,0x01,0xca)
+
+/*
+ * RSP is aligned to a 64-byte boundary before used to push a new stack frame
+ */
+#define FRED_STACK_FRAME_RSP_MASK _AT(unsigned long, (~0x3f))
+
+/*
+ * Event stack level macro for the FRED_STKLVLS MSR.
+ * Usage example: FRED_STKLVL(X86_TRAP_DF, 3)
+ * Multiple values can be ORd together.
+ */
+#define FRED_STKLVL(v,l) (_AT(unsigned long, l) << (2*(v)))
+
+/* FRED_CONFIG MSR */
+#define FRED_CONFIG_CSL_MASK 0x3
+#define FRED_CONFIG_REDZONE_AMOUNT 1 /* measured in 64-byte cache lines */
+#define FRED_CONFIG_REDZONE (_AT(unsigned long, FRED_CONFIG_REDZONE_AMOUNT) << 6)
+#define FRED_CONFIG_INT_STKLVL(l) (_AT(unsigned long, l) << 9)
+#define FRED_CONFIG_ENTRYPOINT(p) _AT(unsigned long, (p))
+
+/* FRED event type and vector bit width and counts */
+#define FRED_EVENT_TYPE_BITS 3 /* only 3 bits used in FRED 3.0 */
+#define FRED_EVENT_TYPE_COUNT _BITUL(FRED_EVENT_TYPE_BITS)
+#define FRED_EVENT_VECTOR_BITS 8
+#define FRED_EVENT_VECTOR_COUNT _BITUL(FRED_EVENT_VECTOR_BITS)
+
+/* FRED EVENT_TYPE_OTHER vector numbers */
+#define FRED_SYSCALL 1
+#define FRED_SYSENTER 2
+
+/* Flags above the CS selector (regs->csx) */
+#define FRED_CSX_ENABLE_NMI _BITUL(28)
+#define FRED_CSX_ALLOW_SINGLE_STEP _BITUL(25)
+#define FRED_CSX_INTERRUPT_SHADOW _BITUL(24)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/kernel.h>
+#include <asm/ptrace.h>
+
+/* FRED stack frame information */
+struct fred_info {
+ unsigned long edata; /* Event data: CR2, DR6, ... */
+ unsigned long resv;
+};
+
+/* Full format of the FRED stack frame */
+struct fred_frame {
+ struct pt_regs regs;
+ struct fred_info info;
+};
+
+/* Getting the FRED frame information from a pt_regs pointer */
+static __always_inline struct fred_info *fred_info(struct pt_regs *regs)
+{
+ return &container_of(regs, struct fred_frame, regs)->info;
+}
+
+static __always_inline unsigned long fred_event_data(struct pt_regs *regs)
+{
+ return fred_info(regs)->edata;
+}
+
+/*
+ * How FRED event handlers are called.
+ *
+ * FRED event delivery establishes the full supervisor context
+ * by pushing everything related to the event being delivered
+ * to the FRED stack frame, e.g., the faulting linear address
+ * of a #PF is pushed as event data of the FRED #PF stack frame.
+ * Thus a struct pt_regs has everything needed and it's the only
+ * input parameter required for a FRED event handler.
+ */
+#define DECLARE_FRED_HANDLER(f) void f (struct pt_regs *regs)
+#define DEFINE_FRED_HANDLER(f) noinstr DECLARE_FRED_HANDLER(f)
+typedef DECLARE_FRED_HANDLER((*fred_handler));
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* CONFIG_X86_FRED */
+
+#endif /* ASM_X86_FRED_H */