[v2,8/8] regulator: fan53555: Add support for RK860X

Message ID 20230406171806.948290-9-cristian.ciocaltea@collabora.com
State New
Headers
Series Add support for Rockchip RK860X regulators |

Commit Message

Cristian Ciocaltea April 6, 2023, 5:18 p.m. UTC
  Extend the existing fan53555 driver to support the Rockchip RK860X
regulators.

RK8600/RK8601 are pretty similar to the FAN53555 regulators.

RK8602/RK8603 are a bit different, having a wider output voltage
selection range, from 0.5 V to 1.5 V in 6.25 mV steps. They also use
additional VSEL0/VSEL1 registers for the voltage selector, but the
enable and mode bits are still located in the original FAN53555 specific
VSEL0/VSEL1 registers.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
 drivers/regulator/fan53555.c | 121 ++++++++++++++++++++++++++++++++++-
 1 file changed, 118 insertions(+), 3 deletions(-)
  

Comments

Krzysztof Kozlowski April 6, 2023, 6:15 p.m. UTC | #1
On 06/04/2023 19:18, Cristian Ciocaltea wrote:
> Extend the existing fan53555 driver to support the Rockchip RK860X
> regulators.
> 
> RK8600/RK8601 are pretty similar to the FAN53555 regulators.
> 
> RK8602/RK8603 are a bit different, having a wider output voltage
> selection range, from 0.5 V to 1.5 V in 6.25 mV steps. They also use
> additional VSEL0/VSEL1 registers for the voltage selector, but the
> enable and mode bits are still located in the original FAN53555 specific
> VSEL0/VSEL1 registers.
> 
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
> ---
>  drivers/regulator/fan53555.c | 121 ++++++++++++++++++++++++++++++++++-
>  1 file changed, 118 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
> index acf14ba7aaa6..130f3dbe9840 100644
> --- a/drivers/regulator/fan53555.c
> +++ b/drivers/regulator/fan53555.c
> @@ -26,6 +26,9 @@
>  #define FAN53555_VSEL0		0x00
>  #define FAN53555_VSEL1		0x01
>  
> +#define RK8602_VSEL0		0x06
> +#define RK8602_VSEL1		0x07
> +
>  #define TCS4525_VSEL0		0x11
>  #define TCS4525_VSEL1		0x10
>  #define TCS4525_TIME		0x13
> @@ -55,6 +58,7 @@
>  
>  #define FAN53555_NVOLTAGES	64	/* Numbers of voltages */
>  #define FAN53526_NVOLTAGES	128
> +#define RK8602_NVOLTAGES	160
>  
>  #define TCS_VSEL0_MODE		BIT(7)
>  #define TCS_VSEL1_MODE		BIT(6)
> @@ -64,6 +68,8 @@
>  enum fan53555_vendor {
>  	FAN53526_VENDOR_FAIRCHILD = 0,
>  	FAN53555_VENDOR_FAIRCHILD,
> +	FAN53555_VENDOR_ROCKCHIP,	/* RK8600, RK8601 */
> +	RK8602_VENDOR_ROCKCHIP,		/* RK8602, RK8603 */


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
  

Patch

diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index acf14ba7aaa6..130f3dbe9840 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -26,6 +26,9 @@ 
 #define FAN53555_VSEL0		0x00
 #define FAN53555_VSEL1		0x01
 
+#define RK8602_VSEL0		0x06
+#define RK8602_VSEL1		0x07
+
 #define TCS4525_VSEL0		0x11
 #define TCS4525_VSEL1		0x10
 #define TCS4525_TIME		0x13
@@ -55,6 +58,7 @@ 
 
 #define FAN53555_NVOLTAGES	64	/* Numbers of voltages */
 #define FAN53526_NVOLTAGES	128
+#define RK8602_NVOLTAGES	160
 
 #define TCS_VSEL0_MODE		BIT(7)
 #define TCS_VSEL1_MODE		BIT(6)
@@ -64,6 +68,8 @@ 
 enum fan53555_vendor {
 	FAN53526_VENDOR_FAIRCHILD = 0,
 	FAN53555_VENDOR_FAIRCHILD,
+	FAN53555_VENDOR_ROCKCHIP,	/* RK8600, RK8601 */
+	RK8602_VENDOR_ROCKCHIP,		/* RK8602, RK8603 */
 	FAN53555_VENDOR_SILERGY,
 	FAN53526_VENDOR_TCS,
 };
@@ -87,6 +93,14 @@  enum {
 	FAN53555_CHIP_ID_08 = 8,
 };
 
+enum {
+	RK8600_CHIP_ID_08 = 8,		/* RK8600, RK8601 */
+};
+
+enum {
+	RK8602_CHIP_ID_10 = 10,		/* RK8602, RK8603 */
+};
+
 enum {
 	TCS4525_CHIP_ID_12 = 12,
 };
@@ -117,6 +131,8 @@  struct fan53555_device_info {
 	/* Voltage setting register */
 	unsigned int vol_reg;
 	unsigned int sleep_reg;
+	unsigned int en_reg;
+	unsigned int sleep_en_reg;
 	/* Voltage range and step(linear) */
 	unsigned int vsel_min;
 	unsigned int vsel_step;
@@ -159,7 +175,7 @@  static int fan53555_set_suspend_enable(struct regulator_dev *rdev)
 {
 	struct fan53555_device_info *di = rdev_get_drvdata(rdev);
 
-	return regmap_update_bits(rdev->regmap, di->sleep_reg,
+	return regmap_update_bits(rdev->regmap, di->sleep_en_reg,
 				  VSEL_BUCK_EN, VSEL_BUCK_EN);
 }
 
@@ -167,7 +183,7 @@  static int fan53555_set_suspend_disable(struct regulator_dev *rdev)
 {
 	struct fan53555_device_info *di = rdev_get_drvdata(rdev);
 
-	return regmap_update_bits(rdev->regmap, di->sleep_reg,
+	return regmap_update_bits(rdev->regmap, di->sleep_en_reg,
 				  VSEL_BUCK_EN, 0);
 }
 
@@ -317,6 +333,50 @@  static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di)
 	return 0;
 }
 
+static int fan53555_voltages_setup_rockchip(struct fan53555_device_info *di)
+{
+	/* Init voltage range and step */
+	switch (di->chip_id) {
+	case RK8600_CHIP_ID_08:
+		di->vsel_min = 712500;
+		di->vsel_step = 12500;
+		break;
+	default:
+		dev_err(di->dev,
+			"Chip ID %d not supported!\n", di->chip_id);
+		return -EINVAL;
+	}
+	di->slew_reg = FAN53555_CONTROL;
+	di->slew_mask = CTL_SLEW_MASK;
+	di->ramp_delay_table = slew_rates;
+	di->n_ramp_values = ARRAY_SIZE(slew_rates);
+	di->vsel_count = FAN53555_NVOLTAGES;
+
+	return 0;
+}
+
+static int rk8602_voltages_setup_rockchip(struct fan53555_device_info *di)
+{
+	/* Init voltage range and step */
+	switch (di->chip_id) {
+	case RK8602_CHIP_ID_10:
+		di->vsel_min = 500000;
+		di->vsel_step = 6250;
+		break;
+	default:
+		dev_err(di->dev,
+			"Chip ID %d not supported!\n", di->chip_id);
+		return -EINVAL;
+	}
+	di->slew_reg = FAN53555_CONTROL;
+	di->slew_mask = CTL_SLEW_MASK;
+	di->ramp_delay_table = slew_rates;
+	di->n_ramp_values = ARRAY_SIZE(slew_rates);
+	di->vsel_count = RK8602_NVOLTAGES;
+
+	return 0;
+}
+
 static int fan53555_voltages_setup_silergy(struct fan53555_device_info *di)
 {
 	/* Init voltage range and step */
@@ -377,6 +437,7 @@  static int fan53555_device_setup(struct fan53555_device_info *di,
 	switch (di->vendor) {
 	case FAN53526_VENDOR_FAIRCHILD:
 	case FAN53555_VENDOR_FAIRCHILD:
+	case FAN53555_VENDOR_ROCKCHIP:
 	case FAN53555_VENDOR_SILERGY:
 		switch (pdata->sleep_vsel_id) {
 		case FAN53555_VSEL_ID_0:
@@ -391,6 +452,27 @@  static int fan53555_device_setup(struct fan53555_device_info *di,
 			dev_err(di->dev, "Invalid VSEL ID!\n");
 			return -EINVAL;
 		}
+		di->sleep_en_reg = di->sleep_reg;
+		di->en_reg = di->vol_reg;
+		break;
+	case RK8602_VENDOR_ROCKCHIP:
+		switch (pdata->sleep_vsel_id) {
+		case FAN53555_VSEL_ID_0:
+			di->sleep_reg = RK8602_VSEL0;
+			di->vol_reg = RK8602_VSEL1;
+			di->sleep_en_reg = FAN53555_VSEL0;
+			di->en_reg = FAN53555_VSEL1;
+			break;
+		case FAN53555_VSEL_ID_1:
+			di->sleep_reg = RK8602_VSEL1;
+			di->vol_reg = RK8602_VSEL0;
+			di->sleep_en_reg = FAN53555_VSEL1;
+			di->en_reg = FAN53555_VSEL0;
+			break;
+		default:
+			dev_err(di->dev, "Invalid VSEL ID!\n");
+			return -EINVAL;
+		}
 		break;
 	case FAN53526_VENDOR_TCS:
 		switch (pdata->sleep_vsel_id) {
@@ -406,6 +488,8 @@  static int fan53555_device_setup(struct fan53555_device_info *di,
 			dev_err(di->dev, "Invalid VSEL ID!\n");
 			return -EINVAL;
 		}
+		di->sleep_en_reg = di->sleep_reg;
+		di->en_reg = di->vol_reg;
 		break;
 	default:
 		dev_err(di->dev, "vendor %d not supported!\n", di->vendor);
@@ -427,10 +511,23 @@  static int fan53555_device_setup(struct fan53555_device_info *di,
 		}
 		break;
 	case FAN53555_VENDOR_FAIRCHILD:
+	case FAN53555_VENDOR_ROCKCHIP:
 	case FAN53555_VENDOR_SILERGY:
 		di->mode_reg = di->vol_reg;
 		di->mode_mask = VSEL_MODE;
 		break;
+	case RK8602_VENDOR_ROCKCHIP:
+		di->mode_mask = VSEL_MODE;
+
+		switch (pdata->sleep_vsel_id) {
+		case FAN53555_VSEL_ID_0:
+			di->mode_reg = FAN53555_VSEL1;
+			break;
+		case FAN53555_VSEL_ID_1:
+			di->mode_reg = FAN53555_VSEL0;
+			break;
+		}
+		break;
 	case FAN53526_VENDOR_TCS:
 		di->mode_reg = TCS4525_COMMAND;
 
@@ -456,6 +553,12 @@  static int fan53555_device_setup(struct fan53555_device_info *di,
 	case FAN53555_VENDOR_FAIRCHILD:
 		ret = fan53555_voltages_setup_fairchild(di);
 		break;
+	case FAN53555_VENDOR_ROCKCHIP:
+		ret = fan53555_voltages_setup_rockchip(di);
+		break;
+	case RK8602_VENDOR_ROCKCHIP:
+		ret = rk8602_voltages_setup_rockchip(di);
+		break;
 	case FAN53555_VENDOR_SILERGY:
 		ret = fan53555_voltages_setup_silergy(di);
 		break;
@@ -481,7 +584,7 @@  static int fan53555_regulator_register(struct fan53555_device_info *di,
 	rdesc->ops = &fan53555_regulator_ops;
 	rdesc->type = REGULATOR_VOLTAGE;
 	rdesc->n_voltages = di->vsel_count;
-	rdesc->enable_reg = di->vol_reg;
+	rdesc->enable_reg = di->en_reg;
 	rdesc->enable_mask = VSEL_BUCK_EN;
 	rdesc->min_uV = di->vsel_min;
 	rdesc->uV_step = di->vsel_step;
@@ -531,6 +634,12 @@  static const struct of_device_id __maybe_unused fan53555_dt_ids[] = {
 	}, {
 		.compatible = "fcs,fan53555",
 		.data = (void *)FAN53555_VENDOR_FAIRCHILD
+	}, {
+		.compatible = "rockchip,rk8600",
+		.data = (void *)FAN53555_VENDOR_ROCKCHIP
+	}, {
+		.compatible = "rockchip,rk8602",
+		.data = (void *)RK8602_VENDOR_ROCKCHIP
 	}, {
 		.compatible = "silergy,syr827",
 		.data = (void *)FAN53555_VENDOR_SILERGY,
@@ -637,6 +746,12 @@  static const struct i2c_device_id fan53555_id[] = {
 	}, {
 		.name = "fan53555",
 		.driver_data = FAN53555_VENDOR_FAIRCHILD
+	}, {
+		.name = "rk8600",
+		.driver_data = FAN53555_VENDOR_ROCKCHIP
+	}, {
+		.name = "rk8602",
+		.driver_data = RK8602_VENDOR_ROCKCHIP
 	}, {
 		.name = "syr827",
 		.driver_data = FAN53555_VENDOR_SILERGY