can: esd_usb: Add support for CAN_CTRLMODE_BERR_REPORTING
Commit Message
Announce that the driver supports CAN_CTRLMODE_BERR_REPORTING by means
of priv->can.ctrlmode_supported. Until now berr reporting always has
been active without taking care of the berr-reporting parameter given
to an "ip link set ..." command.
Additionally apply some changes to function esd_usb_rx_event():
- If berr reporting is off and it is also no state change, then
immediately return.
- Unconditionally (even in case of the above "immediate return") store
tx- and rx-error counters, so directly use priv->bec.txerr and
priv->bec.rxerr instead of intermediate variables.
- Not directly related, but to better point out the linkage between a
failed alloc_can_err_skb() and stats->rx_dropped++:
Move the increment of the rx_dropped statistic counter (back) to
directly behind the err_skb allocation.
Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
---
drivers/net/can/usb/esd_usb.c | 35 ++++++++++++++++++++---------------
1 file changed, 20 insertions(+), 15 deletions(-)
base-commit: db88681c4885b8f2f07241c6f3f1fcf2d773754e
Comments
On 30.03.2023 20:44:46, Frank Jungclaus wrote:
> Announce that the driver supports CAN_CTRLMODE_BERR_REPORTING by means
> of priv->can.ctrlmode_supported. Until now berr reporting always has
> been active without taking care of the berr-reporting parameter given
> to an "ip link set ..." command.
>
> Additionally apply some changes to function esd_usb_rx_event():
> - If berr reporting is off and it is also no state change, then
> immediately return.
> - Unconditionally (even in case of the above "immediate return") store
> tx- and rx-error counters, so directly use priv->bec.txerr and
> priv->bec.rxerr instead of intermediate variables.
> - Not directly related, but to better point out the linkage between a
> failed alloc_can_err_skb() and stats->rx_dropped++:
> Move the increment of the rx_dropped statistic counter (back) to
> directly behind the err_skb allocation.
>
> Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
Applied to linux-can-next
Thanks,
Marc
@@ -237,14 +237,23 @@ static void esd_usb_rx_event(struct esd_usb_net_priv *priv,
if (id == ESD_EV_CAN_ERROR_EXT) {
u8 state = msg->rx.ev_can_err_ext.status;
u8 ecc = msg->rx.ev_can_err_ext.ecc;
- u8 rxerr = msg->rx.ev_can_err_ext.rec;
- u8 txerr = msg->rx.ev_can_err_ext.tec;
+
+ priv->bec.rxerr = msg->rx.ev_can_err_ext.rec;
+ priv->bec.txerr = msg->rx.ev_can_err_ext.tec;
netdev_dbg(priv->netdev,
"CAN_ERR_EV_EXT: dlc=%#02x state=%02x ecc=%02x rec=%02x tec=%02x\n",
- msg->rx.dlc, state, ecc, rxerr, txerr);
+ msg->rx.dlc, state, ecc,
+ priv->bec.rxerr, priv->bec.txerr);
+
+ /* if berr-reporting is off, only pass through on state change ... */
+ if (!(priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING) &&
+ state == priv->old_state)
+ return;
skb = alloc_can_err_skb(priv->netdev, &cf);
+ if (!skb)
+ stats->rx_dropped++;
if (state != priv->old_state) {
enum can_state tx_state, rx_state;
@@ -265,14 +274,14 @@ static void esd_usb_rx_event(struct esd_usb_net_priv *priv,
break;
default:
new_state = CAN_STATE_ERROR_ACTIVE;
- txerr = 0;
- rxerr = 0;
+ priv->bec.txerr = 0;
+ priv->bec.rxerr = 0;
break;
}
if (new_state != priv->can.state) {
- tx_state = (txerr >= rxerr) ? new_state : 0;
- rx_state = (txerr <= rxerr) ? new_state : 0;
+ tx_state = (priv->bec.txerr >= priv->bec.rxerr) ? new_state : 0;
+ rx_state = (priv->bec.txerr <= priv->bec.rxerr) ? new_state : 0;
can_change_state(priv->netdev, cf,
tx_state, rx_state);
}
@@ -304,17 +313,12 @@ static void esd_usb_rx_event(struct esd_usb_net_priv *priv,
cf->data[3] = ecc & SJA1000_ECC_SEG;
}
- priv->bec.txerr = txerr;
- priv->bec.rxerr = rxerr;
-
if (skb) {
cf->can_id |= CAN_ERR_CNT;
- cf->data[6] = txerr;
- cf->data[7] = rxerr;
+ cf->data[6] = priv->bec.txerr;
+ cf->data[7] = priv->bec.rxerr;
netif_rx(skb);
- } else {
- stats->rx_dropped++;
}
}
}
@@ -1016,7 +1020,8 @@ static int esd_usb_probe_one_net(struct usb_interface *intf, int index)
priv->can.state = CAN_STATE_STOPPED;
priv->can.ctrlmode_supported = CAN_CTRLMODE_LISTENONLY |
- CAN_CTRLMODE_CC_LEN8_DLC;
+ CAN_CTRLMODE_CC_LEN8_DLC |
+ CAN_CTRLMODE_BERR_REPORTING;
if (le16_to_cpu(dev->udev->descriptor.idProduct) ==
USB_CANUSBM_PRODUCT_ID)