diff mbox series

[v3,2/3] arm64: dts: ti: k3-am625: Enable Type-C port for USB0

Message ID 20230330084954.49763-3-rogerq@kernel.org
State New
Headers
Series arm64: dts: ti: k3-am625: Enable Type-C dual-role |

Commit Message

Roger Quadros March 30, 2023, 8:49 a.m. UTC 
  USB0 is a Type-C port with dual data role and power sink.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
---
 arch/arm64/boot/dts/ti/k3-am625-sk.dts        |  2 +-
 .../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 35 ++++++++++++++++++-
 2 files changed, 35 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
index cdc0858dd1b2..467e17e28916 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
@@ -150,7 +150,7 @@  exp1: gpio@22 {
 				   "UART1_FET_BUF_EN", "WL_LT_EN",
 				   "GPIO_HDMI_RSTn", "CSI_GPIO1",
 				   "CSI_GPIO2", "PRU_3V3_EN",
-				   "HDMI_INTn", "TEST_GPIO2",
+				   "HDMI_INTn", "PD_I2C_IRQ",
 				   "MCASP1_FET_EN", "MCASP1_BUF_BT_EN",
 				   "MCASP1_FET_SEL", "UART1_FET_SEL",
 				   "TSINT#", "IO_EXP_TEST_LED";
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
index 80e8b9b9a5f5..db7fa20e8fe2 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
@@ -198,6 +198,30 @@  &main_i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
 	clock-frequency = <400000>;
+
+	typec_pd0: tps6598x@3f {
+		compatible = "ti,tps6598x";
+		reg = <0x3f>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			self-powered;
+			data-role = "dual";
+			power-role = "sink";
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					usb_con_hs: endpoint {
+						remote-endpoint = <&usb0_hs_ep>;
+					};
+				};
+			};
+		};
+	};
 };
 
 &main_i2c1 {
@@ -265,7 +289,16 @@  &usbss1 {
 };
 
 &usb0 {
-	dr_mode = "peripheral";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	usb-role-switch;
+
+	port@0 {
+		reg = <0>;
+		usb0_hs_ep: endpoint {
+		    remote-endpoint = <&usb_con_hs>;
+	       };
+	};
 };
 
 &usb1 {