[v4,1/2] dt-bindings: power: supply: bq256xx: Add ti,no-thermistor property

Message ID 20230330065202.1349948-1-chenhuiz@axis.com
State New
Headers
Series [v4,1/2] dt-bindings: power: supply: bq256xx: Add ti,no-thermistor property |

Commit Message

Hermes Zhang March 30, 2023, 6:52 a.m. UTC
  Add a new property ti,no-thermistor to indicate that no thermistor is
connected to the TS pin of the chip.

Signed-off-by: Hermes Zhang <chenhuiz@axis.com>
---

Notes:
    v2: change property name to ti,no-thermistor

    v3: drop "|" in property description

    v4: rebase bq256xx_charger.c

 .../bindings/power/supply/bq256xx.yaml         | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
  

Comments

Krzysztof Kozlowski March 31, 2023, 9:49 a.m. UTC | #1
On 30/03/2023 08:52, Hermes Zhang wrote:
> Add a new property ti,no-thermistor to indicate that no thermistor is
> connected to the TS pin of the chip.
> 
> Signed-off-by: Hermes Zhang <chenhuiz@axis.com>
> ---

So you keep ignoring my comments? I wrote extensive comment at v3. You
did not respond that anything is not clear about my request.

If you keep ignoring it then it's a NAK from me.

Best regards,
Krzysztof
  

Patch

diff --git a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml
index 82f382a7ffb3..4fe9c3705265 100644
--- a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml
+++ b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml
@@ -68,11 +68,29 @@  properties:
       Interrupt sends an active low, 256 μs pulse to host to report the charger
       device status and faults.
 
+  ti,no-thermistor:
+    type: boolean
+    description: Indicates that no thermistor is connected to the TS pin
+
 required:
   - compatible
   - reg
   - monitored-battery
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,bq25600
+              - ti,bq25601
+              - ti,bq25600d
+              - ti,bq25601d
+    then:
+      properties:
+        ti,no-thermistor: false
+
 additionalProperties: false
 
 examples: