@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-spinand-objs := core.o alliancememory.o ato.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o xtx.o
+spinand-objs := core.o alliancememory.o ato.o esmt.o gigadevice.o macronix.o
+spinand-objs += micron.o paragon.o toshiba.o winbond.o xtx.o
obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
@@ -939,6 +939,7 @@ static const struct nand_ops spinand_ops = {
static const struct spinand_manufacturer *spinand_manufacturers[] = {
&alliancememory_spinand_manufacturer,
&ato_spinand_manufacturer,
+ &esmt_c8_spinand_manufacturer,
&gigadevice_spinand_manufacturer,
¯onix_spinand_manufacturer,
µn_spinand_manufacturer,
new file mode 100644
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Author:
+ * Chuanhong Guo <gch981213@gmail.com> - the main driver logic
+ * Martin Kurbanov <mmkurbanov@sberdevices.ru> - OOB layout
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/mtd/spinand.h>
+
+/* ESMT uses GigaDevice 0xc8 JECDEC ID on some SPI NANDs */
+#define SPINAND_MFR_ESMT_C8 0xc8
+
+static SPINAND_OP_VARIANTS(read_cache_variants,
+ SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
+
+static SPINAND_OP_VARIANTS(write_cache_variants,
+ SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
+ SPINAND_PROG_LOAD(true, 0, NULL, 0));
+
+static SPINAND_OP_VARIANTS(update_cache_variants,
+ SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
+ SPINAND_PROG_LOAD(false, 0, NULL, 0));
+
+/*
+ * OOB spare area map (64 bytes)
+ *
+ * Bad Block Markers
+ * filled by HW and kernel Reserved
+ * | +-----------------------+-----------------------+
+ * | | | |
+ * | | OOB free data Area |non ECC protected |
+ * | +-------------|-----+-----------------|-----+-----------------|-----+
+ * | | | | | | | |
+ * +-|---|----------+--|-----|--------------+--|-----|--------------+--|-----|--------------+
+ * | | | section0 | | | section1 | | | section2 | | | section3 |
+ * +-v-+-v-+---+----+--v--+--v--+-----+-----+--v--+--v--+-----+-----+--v--+--v--+-----+-----+
+ * | | | | | | | | | | | | | | | | |
+ * |0:1|2:3|4:7|8:15|16:17|18:19|20:23|24:31|32:33|34:35|36:39|40:47|48:49|50:51|52:55|56:63|
+ * | | | | | | | | | | | | | | | | |
+ * +---+---+-^-+--^-+-----+-----+--^--+--^--+-----+-----+--^--+--^--+-----+-----+--^--+--^--+
+ * | | | | | | | |
+ * | +----------------|-----+-----------------|-----+-----------------|-----+
+ * | ECC Area|(Main + Spare) - filled|by ESMT NAND HW |
+ * | | | |
+ * +---------------------+-----------------------+-----------------------+
+ * OOB ECC protected Area - not used due to
+ * partial programming from some filesystems
+ * (like JFFS2 with cleanmarkers)
+ */
+
+#define ESMT_OOB_SECTION_COUNT 4
+#define ESMT_OOB_SECTION_SIZE(nand) \
+ (nanddev_per_page_oobsize(nand) / ESMT_OOB_SECTION_COUNT)
+#define ESMT_OOB_FREE_SIZE(nand) \
+ (ESMT_OOB_SECTION_SIZE(nand) / 2)
+#define ESMT_OOB_ECC_SIZE(nand) \
+ (ESMT_OOB_SECTION_SIZE(nand) - ESMT_OOB_FREE_SIZE(nand))
+#define ESMT_OOB_BBM_SIZE 2
+
+static int f50l1g41lb_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *region)
+{
+ struct nand_device *nand = mtd_to_nanddev(mtd);
+
+ if (section >= ESMT_OOB_SECTION_COUNT)
+ return -ERANGE;
+
+ region->offset = section * ESMT_OOB_SECTION_SIZE(nand) +
+ ESMT_OOB_FREE_SIZE(nand);
+ region->length = ESMT_OOB_ECC_SIZE(nand);
+
+ return 0;
+}
+
+static int f50l1g41lb_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *region)
+{
+ struct nand_device *nand = mtd_to_nanddev(mtd);
+
+ if (section >= ESMT_OOB_SECTION_COUNT)
+ return -ERANGE;
+
+ /*
+ * Reserve space for bad blocks markers (section0) and
+ * reserved bytes (sections 1-3)
+ */
+ region->offset = section * ESMT_OOB_SECTION_SIZE(nand) + 2;
+
+ /* Use only 2 non-protected ECC bytes per each OOB section */
+ region->length = 2;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops f50l1g41lb_ooblayout = {
+ .ecc = f50l1g41lb_ooblayout_ecc,
+ .free = f50l1g41lb_ooblayout_free,
+};
+
+static const struct spinand_info esmt_c8_spinand_table[] = {
+ SPINAND_INFO("F50L1G41LB",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x01),
+ NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
+ NAND_ECCREQ(1, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&f50l1g41lb_ooblayout, NULL)),
+ SPINAND_INFO("F50D1G41LB",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x11),
+ NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
+ NAND_ECCREQ(1, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&f50l1g41lb_ooblayout, NULL)),
+};
+
+static const struct spinand_manufacturer_ops esmt_spinand_manuf_ops = {
+};
+
+const struct spinand_manufacturer esmt_c8_spinand_manufacturer = {
+ .id = SPINAND_MFR_ESMT_C8,
+ .name = "ESMT",
+ .chips = esmt_c8_spinand_table,
+ .nchips = ARRAY_SIZE(esmt_c8_spinand_table),
+ .ops = &esmt_spinand_manuf_ops,
+};
@@ -262,6 +262,7 @@ struct spinand_manufacturer {
/* SPI NAND manufacturers */
extern const struct spinand_manufacturer alliancememory_spinand_manufacturer;
extern const struct spinand_manufacturer ato_spinand_manufacturer;
+extern const struct spinand_manufacturer esmt_c8_spinand_manufacturer;
extern const struct spinand_manufacturer gigadevice_spinand_manufacturer;
extern const struct spinand_manufacturer macronix_spinand_manufacturer;
extern const struct spinand_manufacturer micron_spinand_manufacturer;