[v3,1/4] ARM: tegra: transformer: use labels for mmc in aliases
Commit Message
Use phandle references for mmc instead of path in aliases.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
arch/arm/boot/dts/tegra114-asus-tf701t.dts | 12 ++++++------
.../boot/dts/tegra30-asus-transformer-common.dtsi | 12 ++++++------
2 files changed, 12 insertions(+), 12 deletions(-)
Comments
ср, 29 бер. 2023 р. о 12:04 Svyatoslav Ryhel <clamor95@gmail.com> пише:
>
> Use phandle references for mmc instead of path in aliases.
>
> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> ---
> arch/arm/boot/dts/tegra114-asus-tf701t.dts | 12 ++++++------
> .../boot/dts/tegra30-asus-transformer-common.dtsi | 12 ++++++------
> 2 files changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm/boot/dts/tegra114-asus-tf701t.dts b/arch/arm/boot/dts/tegra114-asus-tf701t.dts
> index 84a3eb38e71d..3a420ac969ff 100644
> --- a/arch/arm/boot/dts/tegra114-asus-tf701t.dts
> +++ b/arch/arm/boot/dts/tegra114-asus-tf701t.dts
> @@ -13,9 +13,9 @@ / {
> chassis-type = "convertible";
>
> aliases {
> - mmc0 = "/mmc@78000600"; /* eMMC */
> - mmc1 = "/mmc@78000400"; /* uSD slot */
> - mmc2 = "/mmc@78000000"; /* WiFi */
> + mmc0 = &sdmmc4; /* eMMC */
> + mmc1 = &sdmmc3; /* uSD slot */
> + mmc2 = &sdmmc1; /* WiFi */
>
> rtc0 = &palmas;
> rtc1 = "/rtc@7000e000";
> @@ -605,12 +605,12 @@ i2s@70080300 {
> };
> };
>
> - mmc@78000000 {
> + sdmmc1: mmc@78000000 {
> /* WiFi */
> };
>
> /* MicroSD card */
> - mmc@78000400 {
> + sdmmc3: mmc@78000400 {
> status = "okay";
>
> bus-width = <4>;
> @@ -626,7 +626,7 @@ mmc@78000400 {
> pinctrl-0 = <&sdmmc3_default>;
> };
>
> - mmc@78000600 {
> + sdmmc4: mmc@78000600 {
> /* eMMC */
> };
>
> diff --git a/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi b/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
> index 1861b2de2dc3..f32806f07989 100644
> --- a/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
> +++ b/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
> @@ -12,9 +12,9 @@ / {
> chassis-type = "convertible";
>
> aliases {
> - mmc0 = "/mmc@78000600"; /* eMMC */
> - mmc1 = "/mmc@78000000"; /* uSD slot */
> - mmc2 = "/mmc@78000400"; /* WiFi */
> + mmc0 = &sdmmc4; /* eMMC */
> + mmc1 = &sdmmc1; /* uSD slot */
> + mmc2 = &sdmmc3; /* WiFi */
>
> rtc0 = &pmic;
> rtc1 = "/rtc@7000e000";
> @@ -1388,7 +1388,7 @@ i2s@70080600 { /* i2s3 */
> };
> };
>
> - mmc@78000000 {
> + sdmmc1: mmc@78000000 {
> status = "okay";
>
> /* FIXME: Full 208Mhz clock rate doesn't work reliably */
> @@ -1401,7 +1401,7 @@ mmc@78000000 {
> vqmmc-supply = <&vddio_usd>; /* ldo3 */
> };
>
> - mmc@78000400 {
> + sdmmc3: mmc@78000400 {
> status = "okay";
>
> #address-cells = <1>;
> @@ -1431,7 +1431,7 @@ wifi@1 {
> };
> };
>
> - mmc@78000600 {
> + sdmmc4: mmc@78000600 {
> status = "okay";
> bus-width = <8>;
> vmmc-supply = <&vcore_emmc>;
> --
> 2.37.2
>
Hello Thierry!
For some reason this commit was not picked while all others in
the patchset were. May I know why and how to fix this?
Best regards,
Svyatoslav R.
@@ -13,9 +13,9 @@ / {
chassis-type = "convertible";
aliases {
- mmc0 = "/mmc@78000600"; /* eMMC */
- mmc1 = "/mmc@78000400"; /* uSD slot */
- mmc2 = "/mmc@78000000"; /* WiFi */
+ mmc0 = &sdmmc4; /* eMMC */
+ mmc1 = &sdmmc3; /* uSD slot */
+ mmc2 = &sdmmc1; /* WiFi */
rtc0 = &palmas;
rtc1 = "/rtc@7000e000";
@@ -605,12 +605,12 @@ i2s@70080300 {
};
};
- mmc@78000000 {
+ sdmmc1: mmc@78000000 {
/* WiFi */
};
/* MicroSD card */
- mmc@78000400 {
+ sdmmc3: mmc@78000400 {
status = "okay";
bus-width = <4>;
@@ -626,7 +626,7 @@ mmc@78000400 {
pinctrl-0 = <&sdmmc3_default>;
};
- mmc@78000600 {
+ sdmmc4: mmc@78000600 {
/* eMMC */
};
@@ -12,9 +12,9 @@ / {
chassis-type = "convertible";
aliases {
- mmc0 = "/mmc@78000600"; /* eMMC */
- mmc1 = "/mmc@78000000"; /* uSD slot */
- mmc2 = "/mmc@78000400"; /* WiFi */
+ mmc0 = &sdmmc4; /* eMMC */
+ mmc1 = &sdmmc1; /* uSD slot */
+ mmc2 = &sdmmc3; /* WiFi */
rtc0 = &pmic;
rtc1 = "/rtc@7000e000";
@@ -1388,7 +1388,7 @@ i2s@70080600 { /* i2s3 */
};
};
- mmc@78000000 {
+ sdmmc1: mmc@78000000 {
status = "okay";
/* FIXME: Full 208Mhz clock rate doesn't work reliably */
@@ -1401,7 +1401,7 @@ mmc@78000000 {
vqmmc-supply = <&vddio_usd>; /* ldo3 */
};
- mmc@78000400 {
+ sdmmc3: mmc@78000400 {
status = "okay";
#address-cells = <1>;
@@ -1431,7 +1431,7 @@ wifi@1 {
};
};
- mmc@78000600 {
+ sdmmc4: mmc@78000600 {
status = "okay";
bus-width = <8>;
vmmc-supply = <&vcore_emmc>;