[v4,1/5] dt-bindings: mfd: Add the Lantiq PEF2256 E1/T1/J1 framer

Message ID 20230328074811.594361-2-herve.codina@bootlin.com
State New
Headers
Series Add the Lantiq PEF2256 audio support |

Commit Message

Herve Codina March 28, 2023, 7:48 a.m. UTC
  The Lantiq PEF2256 is a framer and line interface component designed to
fulfill all required interfacing between an analog E1/T1/J1 line and the
digital PCM system highway/H.100 bus.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
 .../bindings/mfd/lantiq,pef2256.yaml          | 270 ++++++++++++++++++
 1 file changed, 270 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml
  

Comments

Krzysztof Kozlowski March 28, 2023, 8:06 a.m. UTC | #1
On 28/03/2023 09:48, Herve Codina wrote:
> The Lantiq PEF2256 is a framer and line interface component designed to
> fulfill all required interfacing between an analog E1/T1/J1 line and the
> digital PCM system highway/H.100 bus.
> 
> Signed-off-by: Herve Codina <herve.codina@bootlin.com>
> ---
>  .../bindings/mfd/lantiq,pef2256.yaml          | 270 ++++++++++++++++++
>  1 file changed, 270 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml


> +  pinctrl:
> +    $ref: /schemas/pinctrl/pinctrl.yaml#
> +
> +    patternProperties:
> +      '-pins$':
> +        type: object
> +        $ref: /schemas/pinctrl/pincfg-node.yaml#
> +
> +        properties:
> +          pins:
> +            enum: [ RPA, RPB, RPC, RPD, XPA, XPB, XPC, XPD ]
> +
> +          function:
> +            enum: [ SYPR, RFM, RFMB, RSIGM, RSIG, DLR, FREEZE, RFSP, LOS,
> +                    SYPX, XFMS, XSIG, TCLK, XMFB, XSIGM, DLX, XCLK, XLT,
> +                    GPI, GPOH, GPOL ]
> +
> +        additionalProperties: false

Move it up (Put it after $ref: /schemas/pinctrl/pincfg-node.yaml#)

> +
> +        required:
> +          - pins
> +          - function
> +
> +    additionalProperties: false

Put it after $ref


> +
> +  lantiq,line-interface:
> +    $ref: /schemas/types.yaml#/definitions/string
> +    enum: [e1, t1j1]
> +    default: e1
> +    description: |
> +      The line interface type
> +        - e1: E1 line
> +        - t1j1: T1/J1 line
> +
> +  lantiq,frame-format:
> +    $ref: /schemas/types.yaml#/definitions/string
> +    description:
> +      The line interface frame format.
> +
> +  lantiq,data-rate-bps:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [2048000, 4096000, 8192000, 16384000]
> +    default: 2048000
> +    description:
> +      Data rate (bit per seconds) on the system highway.
> +
> +  lantiq,clock-falling-edge:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description:
> +      Data is sent on falling edge of the clock (and received on the rising
> +      edge). If 'clock-falling-edge' is not present, data is sent on the
> +      rising edge (and received on the falling edge).
> +
> +  lantiq,channel-phase:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [0, 1, 2, 3, 4, 5, 6, 7]
> +    default: 0
> +    description:
> +      The pef2256 delivers a full frame (32 8bit time-slots in E1 and 24 8bit
> +      time-slots 8 8bit signaling in E1/J1) every 125us. This lead to a data
> +      rate of 2048000 bit/s. When lantiq,data-rate-bps is more than 2048000
> +      bit/s, the data (all 32 8bit) present in the frame are interleave with
> +      unused time-slots. The lantiq,channel-phase property allows to set the
> +      correct alignment of the interleave mechanism.
> +      For instance, suppose lantiq,data-rate-bps = 8192000 (ie 4*2048000), and
> +      lantiq,channel-phase = 2, the interleave schema with unused time-slots
> +      (nu) and used time-slots (XX) for TSi is
> +        nu nu XX nu nu nu XX nu nu nu XX nu
> +        <-- TSi --> <- TSi+1 -> <- TSi+2 ->
> +      With lantiq,data-rate-bps = 8192000, and lantiq,channel-phase = 1, the
> +      interleave schema is
> +        nu XX nu nu nu XX nu nu nu XX nu nu
> +        <-- TSi --> <- TSi+1 -> <- TSi+2 ->
> +      With lantiq,data-rate-bps = 4096000 (ie 2*2048000), and
> +      lantiq,channel-phase = 1, the interleave schema is
> +        nu    XX    nu    XX    nu    XX
> +        <-- TSi --> <- TSi+1 -> <- TSi+2 ->
> +
> +  lantiq,subordinate:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description:
> +      If present, the pef2256 works in subordinate mode. In this mode it
> +      synchronizes on line interface clock signals. Otherwise, it synchronizes
> +      on internal clocks.
> +
> +patternProperties:
> +  '^codec([0-9]|[1-2][0-9]|3[0-1])?$':

Missing '-' before suffix numbers.

> +    type: object
> +    $ref: /schemas/sound/dai-common.yaml
> +    description:
> +      Codec provided by the pef2256. This codec allows to use some of the PCM
> +      system highway time-slots as audio channels to transport audio data over
> +      the E1/T1/J1 lines.
> +      The time-slots used by the codec must be set and so, the properties
> +      'dai-tdm-slot-num', 'dai-tdm-slot-width', 'dai-tdm-slot-tx-mask' and
> +      'dai-tdm-slot-rx-mask' must be present in the sound card node for
> +      sub-nodes that involve the codec. The codec uses 8bit time-slots.
> +      'dai-tdm-tdm-slot-with' must be set to 8.
> +      The tx and rx masks define the pef2256 time-slots assigned to the codec.
> +
> +    properties:
> +      compatible:
> +        const: lantiq,pef2256-codec
> +
> +      '#sound-dai-cells':
> +        const: 0
> +
> +    required:
> +      - compatible
> +      - '#sound-dai-cells'
> +
> +    unevaluatedProperties: false

Put it after $ref

> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - interrupts
> +
> +allOf:
> +  - if:
> +      properties:
> +        lantiq,line-interface:
> +          contains:
> +            const: e1
> +    then:
> +      properties:
> +        lantiq,frame-format:
> +          enum: [doubleframe, crc4-multiframe, auto-multiframe]
> +          default: doubleframe
> +          description: |
> +            The E1 line interface frame format
> +              - doubleframe: Doubleframe format
> +              - crc4-multiframe: CRC4 multiframe format
> +              - auto-multiframe: CRC4 multiframe format with interworking
> +                                 capabilities (ITU-T G.706 Annex B)
> +
> +    else:
> +      # T1/J1 line
> +      properties:
> +        lantiq,frame-format:
> +          enum: [4frame, 12frame, 24frame, 72frame]
> +          default: 12frame
> +          description: |
> +            The T1/J1 line interface frame format
> +              - 4frame: 4-frame multiframe format (F4)
> +              - 12frame: 12-frame multiframe format (F12, D3/4)
> +              - 24frame: 24-frame multiframe format (ESF)
> +              - 72frame: 72-frame multiframe format (F72, remote switch mode)
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    framer@2000000 {
> +      compatible = "lantiq,pef2256", "simple-mfd";
> +      reg = <0x2000000 0x100>;
> +      interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
> +      interrupt-parent = <&intc>;
> +      clocks = <&clk_mclk>, <&clk_sclkr>, <&clk_sclkx>;
> +      clock-names = "mclk", "sclkr", "sclkx";
> +      reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
> +      lantiq,data-rate-bps = <4096000>;
> +
> +      pinctrl {
> +        pef2256_rpa_sypr: rpa-pins {
> +          pins = "RPA";
> +          function = "SYPR";
> +        };
> +        pef2256_xpa_sypx: xpa-pins {
> +          pins = "XPA";
> +          function = "SYPX";
> +        };
> +      };
> +
> +      pef2256_codec0: codec0 {

codec-0

> +        compatible = "lantiq,pef2256-codec";
> +        #sound-dai-cells = <0>;
> +        sound-name-prefix = "PEF2256_0";
> +      };
> +
> +      pef2256_codec1: codec1 {

codec-1

> +        compatible = "lantiq,pef2256-codec";
> +        #sound-dai-cells = <0>;
> +        sound-name-prefix = "PEF2256_1";
> +      };
> +    };
> +


Best regards,
Krzysztof
  

Patch

diff --git a/Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml b/Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml
new file mode 100644
index 000000000000..e2c2959a21f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml
@@ -0,0 +1,270 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/lantiq,pef2256.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq PEF2256
+
+maintainers:
+  - Herve Codina <herve.codina@bootlin.com>
+
+description:
+  The Lantiq PEF2256, also known as Infineon PEF2256 or FALC56, is a framer and
+  line interface component designed to fulfill all required interfacing between
+  an analog E1/T1/J1 line and the digital PCM system highway/H.100 bus.
+
+properties:
+  compatible:
+    items:
+      - const: lantiq,pef2256
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Master clock
+      - description: Receive System Clock
+      - description: Transmit System Clock
+
+  clock-names:
+    items:
+      - const: mclk
+      - const: sclkr
+      - const: sclkx
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      GPIO used to reset the device.
+    maxItems: 1
+
+  pinctrl:
+    $ref: /schemas/pinctrl/pinctrl.yaml#
+
+    patternProperties:
+      '-pins$':
+        type: object
+        $ref: /schemas/pinctrl/pincfg-node.yaml#
+
+        properties:
+          pins:
+            enum: [ RPA, RPB, RPC, RPD, XPA, XPB, XPC, XPD ]
+
+          function:
+            enum: [ SYPR, RFM, RFMB, RSIGM, RSIG, DLR, FREEZE, RFSP, LOS,
+                    SYPX, XFMS, XSIG, TCLK, XMFB, XSIGM, DLX, XCLK, XLT,
+                    GPI, GPOH, GPOL ]
+
+        additionalProperties: false
+
+        required:
+          - pins
+          - function
+
+    additionalProperties: false
+
+  lantiq,line-interface:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [e1, t1j1]
+    default: e1
+    description: |
+      The line interface type
+        - e1: E1 line
+        - t1j1: T1/J1 line
+
+  lantiq,frame-format:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      The line interface frame format.
+
+  lantiq,data-rate-bps:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [2048000, 4096000, 8192000, 16384000]
+    default: 2048000
+    description:
+      Data rate (bit per seconds) on the system highway.
+
+  lantiq,clock-falling-edge:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Data is sent on falling edge of the clock (and received on the rising
+      edge). If 'clock-falling-edge' is not present, data is sent on the
+      rising edge (and received on the falling edge).
+
+  lantiq,channel-phase:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6, 7]
+    default: 0
+    description:
+      The pef2256 delivers a full frame (32 8bit time-slots in E1 and 24 8bit
+      time-slots 8 8bit signaling in E1/J1) every 125us. This lead to a data
+      rate of 2048000 bit/s. When lantiq,data-rate-bps is more than 2048000
+      bit/s, the data (all 32 8bit) present in the frame are interleave with
+      unused time-slots. The lantiq,channel-phase property allows to set the
+      correct alignment of the interleave mechanism.
+      For instance, suppose lantiq,data-rate-bps = 8192000 (ie 4*2048000), and
+      lantiq,channel-phase = 2, the interleave schema with unused time-slots
+      (nu) and used time-slots (XX) for TSi is
+        nu nu XX nu nu nu XX nu nu nu XX nu
+        <-- TSi --> <- TSi+1 -> <- TSi+2 ->
+      With lantiq,data-rate-bps = 8192000, and lantiq,channel-phase = 1, the
+      interleave schema is
+        nu XX nu nu nu XX nu nu nu XX nu nu
+        <-- TSi --> <- TSi+1 -> <- TSi+2 ->
+      With lantiq,data-rate-bps = 4096000 (ie 2*2048000), and
+      lantiq,channel-phase = 1, the interleave schema is
+        nu    XX    nu    XX    nu    XX
+        <-- TSi --> <- TSi+1 -> <- TSi+2 ->
+
+  lantiq,subordinate:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If present, the pef2256 works in subordinate mode. In this mode it
+      synchronizes on line interface clock signals. Otherwise, it synchronizes
+      on internal clocks.
+
+patternProperties:
+  '^codec([0-9]|[1-2][0-9]|3[0-1])?$':
+    type: object
+    $ref: /schemas/sound/dai-common.yaml
+    description:
+      Codec provided by the pef2256. This codec allows to use some of the PCM
+      system highway time-slots as audio channels to transport audio data over
+      the E1/T1/J1 lines.
+      The time-slots used by the codec must be set and so, the properties
+      'dai-tdm-slot-num', 'dai-tdm-slot-width', 'dai-tdm-slot-tx-mask' and
+      'dai-tdm-slot-rx-mask' must be present in the sound card node for
+      sub-nodes that involve the codec. The codec uses 8bit time-slots.
+      'dai-tdm-tdm-slot-with' must be set to 8.
+      The tx and rx masks define the pef2256 time-slots assigned to the codec.
+
+    properties:
+      compatible:
+        const: lantiq,pef2256-codec
+
+      '#sound-dai-cells':
+        const: 0
+
+    required:
+      - compatible
+      - '#sound-dai-cells'
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+allOf:
+  - if:
+      properties:
+        lantiq,line-interface:
+          contains:
+            const: e1
+    then:
+      properties:
+        lantiq,frame-format:
+          enum: [doubleframe, crc4-multiframe, auto-multiframe]
+          default: doubleframe
+          description: |
+            The E1 line interface frame format
+              - doubleframe: Doubleframe format
+              - crc4-multiframe: CRC4 multiframe format
+              - auto-multiframe: CRC4 multiframe format with interworking
+                                 capabilities (ITU-T G.706 Annex B)
+
+    else:
+      # T1/J1 line
+      properties:
+        lantiq,frame-format:
+          enum: [4frame, 12frame, 24frame, 72frame]
+          default: 12frame
+          description: |
+            The T1/J1 line interface frame format
+              - 4frame: 4-frame multiframe format (F4)
+              - 12frame: 12-frame multiframe format (F12, D3/4)
+              - 24frame: 24-frame multiframe format (ESF)
+              - 72frame: 72-frame multiframe format (F72, remote switch mode)
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    framer@2000000 {
+      compatible = "lantiq,pef2256", "simple-mfd";
+      reg = <0x2000000 0x100>;
+      interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+      interrupt-parent = <&intc>;
+      clocks = <&clk_mclk>, <&clk_sclkr>, <&clk_sclkx>;
+      clock-names = "mclk", "sclkr", "sclkx";
+      reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+      lantiq,data-rate-bps = <4096000>;
+
+      pinctrl {
+        pef2256_rpa_sypr: rpa-pins {
+          pins = "RPA";
+          function = "SYPR";
+        };
+        pef2256_xpa_sypx: xpa-pins {
+          pins = "XPA";
+          function = "SYPX";
+        };
+      };
+
+      pef2256_codec0: codec0 {
+        compatible = "lantiq,pef2256-codec";
+        #sound-dai-cells = <0>;
+        sound-name-prefix = "PEF2256_0";
+      };
+
+      pef2256_codec1: codec1 {
+        compatible = "lantiq,pef2256-codec";
+        #sound-dai-cells = <0>;
+        sound-name-prefix = "PEF2256_1";
+      };
+    };
+
+    sound {
+      compatible = "simple-audio-card";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      simple-audio-card,dai-link@0 { /* CPU DAI1 - pef2256 codec 1 */
+        reg = <0>;
+        cpu {
+          sound-dai = <&cpu_dai1>;
+        };
+        codec {
+          sound-dai = <&pef2256_codec0>;
+          dai-tdm-slot-num = <4>;
+          dai-tdm-slot-width = <8>;
+          /* TS 1, 2, 3, 4 */
+          dai-tdm-slot-tx-mask = <0 1 1 1 1>;
+          dai-tdm-slot-rx-mask = <0 1 1 1 1>;
+        };
+      };
+      simple-audio-card,dai-link@1 { /* CPU DAI2 - pef2256 codec 2 */
+        reg = <1>;
+        cpu {
+          sound-dai = <&cpu_dai2>;
+        };
+        codec {
+          sound-dai = <&pef2256_codec1>;
+          dai-tdm-slot-num = <4>;
+          dai-tdm-slot-width = <8>;
+          /* TS 5, 6, 7, 8 */
+          dai-tdm-slot-tx-mask = <0 0 0 0 0 1 1 1 1>;
+          dai-tdm-slot-rx-mask = <0 0 0 0 0 1 1 1 1>;
+        };
+      };
+    };