[v2,2/2] spi: add support for Meson A1 SPI Flash Controller

  This is a driver for the Amlogic Meson SPI flash controller support
on A113L SoC.

Signed-off-by: Martin Kurbanov <mmkurbanov@sberdevices.ru>
---
 drivers/spi/Kconfig              |   7 +
 drivers/spi/Makefile             |   1 +
 drivers/spi/spi-meson-spifc-a1.c | 453 +++++++++++++++++++++++++++++++
 3 files changed, 461 insertions(+)
 create mode 100644 drivers/spi/spi-meson-spifc-a1.c
  

On 27/03/2023 23:13, Martin Kurbanov wrote:
> This is a driver for the Amlogic Meson SPI flash controller support
> on A113L SoC.
> 
> Signed-off-by: Martin Kurbanov <mmkurbanov@sberdevices.ru>
> ---
>   drivers/spi/Kconfig              |   7 +
>   drivers/spi/Makefile             |   1 +
>   drivers/spi/spi-meson-spifc-a1.c | 453 +++++++++++++++++++++++++++++++
>   3 files changed, 461 insertions(+)
>   create mode 100644 drivers/spi/spi-meson-spifc-a1.c
> 
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index 3b1c0878bb85..80ec01dbe7c1 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -582,6 +582,13 @@ config SPI_MESON_SPIFC
>   	  This enables master mode support for the SPIFC (SPI flash
>   	  controller) available in Amlogic Meson SoCs.
>   
> +config SPI_MESON_SPIFC_A1
> +	tristate "Amlogic Meson A1 SPIFC controller"
> +	depends on ARCH_MESON || COMPILE_TEST
> +	help
> +	  This enables master mode support for the SPIFC (SPI flash
> +	  controller) available in Amlogic Meson A1 (A113L SoC).
> +
>   config SPI_MICROCHIP_CORE
>   	tristate "Microchip FPGA SPI controllers"
>   	depends on SPI_MASTER
> diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
> index be9ba40ef8d0..702053970967 100644
> --- a/drivers/spi/Makefile
> +++ b/drivers/spi/Makefile
> @@ -72,6 +72,7 @@ obj-$(CONFIG_SPI_LM70_LLP)		+= spi-lm70llp.o
>   obj-$(CONFIG_SPI_LP8841_RTC)		+= spi-lp8841-rtc.o
>   obj-$(CONFIG_SPI_MESON_SPICC)		+= spi-meson-spicc.o
>   obj-$(CONFIG_SPI_MESON_SPIFC)		+= spi-meson-spifc.o
> +obj-$(CONFIG_SPI_MESON_SPIFC_A1)	+= spi-meson-spifc-a1.o
>   obj-$(CONFIG_SPI_MICROCHIP_CORE)	+= spi-microchip-core.o
>   obj-$(CONFIG_SPI_MICROCHIP_CORE_QSPI)	+= spi-microchip-core-qspi.o
>   obj-$(CONFIG_SPI_MPC512x_PSC)		+= spi-mpc512x-psc.o
> diff --git a/drivers/spi/spi-meson-spifc-a1.c b/drivers/spi/spi-meson-spifc-a1.c
> new file mode 100644
> index 000000000000..9fecf0a71bef
> --- /dev/null
> +++ b/drivers/spi/spi-meson-spifc-a1.c
> @@ -0,0 +1,453 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Driver for Amlogic Meson A1 SPI flash controller (SPIFC)
> + *
> + * Copyright (c) 2023, SberDevices. All Rights Reserved.
> + *
> + * Author: Martin Kurbanov <mmkurbanov@sberdevices.ru>
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/device.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/spi/spi.h>
> +#include <linux/spi/spi-mem.h>
> +#include <linux/types.h>
> +
> +#define SPIFC_A1_AHB_CTRL_REG		0x0
> +#define SPIFC_A1_AHB_BUS_EN		BIT(31)
> +
> +#define SPIFC_A1_USER_CTRL0_REG		0x200
> +#define SPIFC_A1_USER_REQUEST_ENABLE	BIT(31)
> +#define SPIFC_A1_USER_REQUEST_FINISH	BIT(30)
> +#define SPIFC_A1_USER_DATA_UPDATED	BIT(0)
> +
> +#define SPIFC_A1_USER_CTRL1_REG		0x204
> +#define SPIFC_A1_USER_CMD_ENABLE	BIT(30)
> +#define SPIFC_A1_USER_CMD_MODE		GENMASK(29, 28)
> +#define SPIFC_A1_USER_CMD_CODE		GENMASK(27, 20)
> +#define SPIFC_A1_USER_ADDR_ENABLE	BIT(19)
> +#define SPIFC_A1_USER_ADDR_MODE		GENMASK(18, 17)
> +#define SPIFC_A1_USER_ADDR_BYTES	GENMASK(16, 15)
> +#define SPIFC_A1_USER_DOUT_ENABLE	BIT(14)
> +#define SPIFC_A1_USER_DOUT_MODE		GENMASK(11, 10)
> +#define SPIFC_A1_USER_DOUT_BYTES	GENMASK(9, 0)
> +
> +#define SPIFC_A1_USER_CTRL2_REG		0x208
> +#define SPIFC_A1_USER_DUMMY_ENABLE	BIT(31)
> +#define SPIFC_A1_USER_DUMMY_MODE	GENMASK(30, 29)
> +#define SPIFC_A1_USER_DUMMY_CLK_SYCLES	GENMASK(28, 23)
> +
> +#define SPIFC_A1_USER_CTRL3_REG		0x20c
> +#define SPIFC_A1_USER_DIN_ENABLE	BIT(31)
> +#define SPIFC_A1_USER_DIN_MODE		GENMASK(28, 27)
> +#define SPIFC_A1_USER_DIN_BYTES		GENMASK(25, 16)
> +
> +#define SPIFC_A1_USER_ADDR_REG		0x210
> +
> +#define SPIFC_A1_AHB_REQ_CTRL_REG	0x214
> +#define SPIFC_A1_AHB_REQ_ENABLE		BIT(31)
> +
> +#define SPIFC_A1_ACTIMING0_REG		(0x0088 << 2)
> +#define SPIFC_A1_TSLCH			GENMASK(31, 30)
> +#define SPIFC_A1_TCLSH			GENMASK(29, 28)
> +#define SPIFC_A1_TSHWL			GENMASK(20, 16)
> +#define SPIFC_A1_TSHSL2			GENMASK(15, 12)
> +#define SPIFC_A1_TSHSL1			GENMASK(11, 8)
> +#define SPIFC_A1_TWHSL			GENMASK(7, 0)
> +
> +#define SPIFC_A1_DBUF_CTRL_REG		0x240
> +#define SPIFC_A1_DBUF_DIR		BIT(31)
> +#define SPIFC_A1_DBUF_AUTO_UPDATE_ADDR	BIT(30)
> +#define SPIFC_A1_DBUF_ADDR		GENMASK(7, 0)
> +
> +#define SPIFC_A1_DBUF_DATA_REG		0x244
> +
> +#define SPIFC_A1_USER_DBUF_ADDR_REG	0x248
> +
> +#define SPIFC_A1_BUFFER_SIZE		512
> +
> +#define SPIFC_A1_MAX_HZ			200000000
> +#define SPIFC_A1_MIN_HZ			1000000
> +
> +#define SPIFC_A1_USER_CMD(op) ( \
> +	SPIFC_A1_USER_CMD_ENABLE | \
> +	FIELD_PREP(SPIFC_A1_USER_CMD_CODE, (op)->cmd.opcode) | \
> +	FIELD_PREP(SPIFC_A1_USER_CMD_MODE, ilog2((op)->cmd.buswidth)))
> +
> +#define SPIFC_A1_USER_ADDR(op) ( \
> +	SPIFC_A1_USER_ADDR_ENABLE | \
> +	FIELD_PREP(SPIFC_A1_USER_ADDR_MODE, ilog2((op)->addr.buswidth)) | \
> +	FIELD_PREP(SPIFC_A1_USER_ADDR_BYTES, (op)->addr.nbytes - 1))
> +
> +#define SPIFC_A1_USER_DUMMY(op) ( \
> +	SPIFC_A1_USER_DUMMY_ENABLE | \
> +	FIELD_PREP(SPIFC_A1_USER_DUMMY_MODE, ilog2((op)->dummy.buswidth)) | \
> +	FIELD_PREP(SPIFC_A1_USER_DUMMY_CLK_SYCLES, (op)->dummy.nbytes << 3))
> +
> +#define SPIFC_A1_TSLCH_VAL	FIELD_PREP(SPIFC_A1_TSLCH, 1)
> +#define SPIFC_A1_TCLSH_VAL	FIELD_PREP(SPIFC_A1_TCLSH, 1)
> +#define SPIFC_A1_TSHWL_VAL	FIELD_PREP(SPIFC_A1_TSHWL, 7)
> +#define SPIFC_A1_TSHSL2_VAL	FIELD_PREP(SPIFC_A1_TSHSL2, 7)
> +#define SPIFC_A1_TSHSL1_VAL	FIELD_PREP(SPIFC_A1_TSHSL1, 7)
> +#define SPIFC_A1_TWHSL_VAL	FIELD_PREP(SPIFC_A1_TWHSL, 2)
> +#define SPIFC_A1_ACTIMING0_VAL	(SPIFC_A1_TSLCH_VAL | SPIFC_A1_TCLSH_VAL | \
> +				 SPIFC_A1_TSHWL_VAL | SPIFC_A1_TSHSL2_VAL | \
> +				 SPIFC_A1_TSHSL1_VAL | SPIFC_A1_TWHSL_VAL)
> +
> +struct meson_spifc_a1 {
> +	struct spi_controller *ctrl;
> +	struct clk *clk;
> +	struct device *dev;
> +	void __iomem *base;
> +};
> +
> +static int meson_spifc_a1_request(struct meson_spifc_a1 *spifc, bool read)
> +{
> +	u32 mask = SPIFC_A1_USER_REQUEST_FINISH |
> +		   (read ? SPIFC_A1_USER_DATA_UPDATED : 0);
> +	u32 val;
> +
> +	writel(SPIFC_A1_USER_REQUEST_ENABLE,
> +	       spifc->base + SPIFC_A1_USER_CTRL0_REG);
> +
> +	return readl_poll_timeout(spifc->base + SPIFC_A1_USER_CTRL0_REG,
> +				  val, (val & mask) == mask, 0,
> +				  200 * USEC_PER_MSEC);
> +}
> +
> +static void meson_spifc_a1_drain_buffer(struct meson_spifc_a1 *spifc,
> +					char *buf, u32 len)
> +{
> +	u32 data;
> +	const u32 count = len / sizeof(data);
> +	const u32 pad = len % sizeof(data);
> +
> +	writel(SPIFC_A1_DBUF_AUTO_UPDATE_ADDR,
> +	       spifc->base + SPIFC_A1_DBUF_CTRL_REG);
> +	ioread32_rep(spifc->base + SPIFC_A1_DBUF_DATA_REG, buf, count);
> +
> +	if (pad) {
> +		data = readl(spifc->base + SPIFC_A1_DBUF_DATA_REG);
> +		memcpy(buf + len - pad, &data, pad);
> +	}
> +}
> +
> +static void meson_spifc_a1_fill_buffer(struct meson_spifc_a1 *spifc,
> +				       const char *buf, u32 len)
> +{
> +	u32 data;
> +	const u32 count = len / sizeof(data);
> +	const u32 pad = len % sizeof(data);
> +
> +	writel(SPIFC_A1_DBUF_DIR | SPIFC_A1_DBUF_AUTO_UPDATE_ADDR,
> +	       spifc->base + SPIFC_A1_DBUF_CTRL_REG);
> +	iowrite32_rep(spifc->base + SPIFC_A1_DBUF_DATA_REG, buf, count);
> +
> +	if (pad) {
> +		memcpy(&data, buf + len - pad, pad);
> +		writel(data, spifc->base + SPIFC_A1_DBUF_DATA_REG);
> +	}
> +}
> +
> +static void meson_spifc_a1_user_init(struct meson_spifc_a1 *spifc)
> +{
> +	writel(0, spifc->base + SPIFC_A1_USER_CTRL0_REG);
> +	writel(0, spifc->base + SPIFC_A1_USER_CTRL1_REG);
> +	writel(0, spifc->base + SPIFC_A1_USER_CTRL2_REG);
> +	writel(0, spifc->base + SPIFC_A1_USER_CTRL3_REG);
> +}
> +
> +static void meson_spifc_a1_set_cmd(struct meson_spifc_a1 *spifc, u32 cmd_cfg)
> +{
> +	u32 val;
> +
> +	val = readl(spifc->base + SPIFC_A1_USER_CTRL1_REG);
> +	val &= ~(SPIFC_A1_USER_CMD_MODE | SPIFC_A1_USER_CMD_CODE);
> +	val |= cmd_cfg;
> +	writel(val, spifc->base + SPIFC_A1_USER_CTRL1_REG);
> +}
> +
> +static void meson_spifc_a1_set_addr(struct meson_spifc_a1 *spifc, u32 addr,
> +				    u32 addr_cfg)
> +{
> +	u32 val;
> +
> +	writel(addr, spifc->base + SPIFC_A1_USER_ADDR_REG);
> +
> +	val = readl(spifc->base + SPIFC_A1_USER_CTRL1_REG);
> +	val &= ~(SPIFC_A1_USER_ADDR_MODE | SPIFC_A1_USER_ADDR_BYTES);
> +	val |= addr_cfg;
> +	writel(val, spifc->base + SPIFC_A1_USER_CTRL1_REG);
> +}
> +
> +static void meson_spifc_a1_set_dummy(struct meson_spifc_a1 *spifc,
> +				     u32 dummy_cfg)
> +{
> +	u32 val = readl(spifc->base + SPIFC_A1_USER_CTRL2_REG);
> +
> +	val &= ~(SPIFC_A1_USER_DUMMY_MODE | SPIFC_A1_USER_DUMMY_CLK_SYCLES);
> +	val |= dummy_cfg;
> +	writel(val, spifc->base + SPIFC_A1_USER_CTRL2_REG);
> +}
> +
> +static int meson_spifc_a1_read(struct meson_spifc_a1 *spifc, void *buf,
> +			       u32 size, u32 mode)
> +{
> +	u32 val = readl(spifc->base + SPIFC_A1_USER_CTRL3_REG);
> +	int ret;
> +
> +	val &= ~(SPIFC_A1_USER_DIN_MODE | SPIFC_A1_USER_DIN_BYTES);
> +	val |= SPIFC_A1_USER_DIN_ENABLE;
> +	val |= FIELD_PREP(SPIFC_A1_USER_DIN_MODE, mode);
> +	val |= FIELD_PREP(SPIFC_A1_USER_DIN_BYTES, size);
> +	writel(val, spifc->base + SPIFC_A1_USER_CTRL3_REG);
> +
> +	ret = meson_spifc_a1_request(spifc, true);
> +	if (!ret)
> +		meson_spifc_a1_drain_buffer(spifc, buf, size);
> +
> +	return ret;
> +}
> +
> +static int meson_spifc_a1_write(struct meson_spifc_a1 *spifc, const void *buf,
> +				u32 size, u32 mode)
> +{
> +	u32 val;
> +
> +	meson_spifc_a1_fill_buffer(spifc, buf, size);
> +
> +	val = readl(spifc->base + SPIFC_A1_USER_CTRL1_REG);
> +	val &= ~(SPIFC_A1_USER_DOUT_MODE | SPIFC_A1_USER_DOUT_BYTES);
> +	val |= FIELD_PREP(SPIFC_A1_USER_DOUT_MODE, mode);
> +	val |= FIELD_PREP(SPIFC_A1_USER_DOUT_BYTES, size);
> +	val |= SPIFC_A1_USER_DOUT_ENABLE;
> +	writel(val, spifc->base + SPIFC_A1_USER_CTRL1_REG);
> +
> +	return meson_spifc_a1_request(spifc, false);
> +}
> +
> +static int meson_spifc_a1_exec_op(struct spi_mem *mem,
> +				  const struct spi_mem_op *op)
> +{
> +	struct meson_spifc_a1 *spifc =
> +		spi_controller_get_devdata(mem->spi->controller);
> +	size_t off, nbytes = op->data.nbytes;
> +	u32 cmd_cfg, addr_cfg, dummy_cfg, dmode;
> +	int ret;
> +
> +	meson_spifc_a1_user_init(spifc);
> +
> +	cmd_cfg = SPIFC_A1_USER_CMD(op);
> +	meson_spifc_a1_set_cmd(spifc, cmd_cfg);
> +
> +	if (op->addr.nbytes) {
> +		addr_cfg = SPIFC_A1_USER_ADDR(op);
> +		meson_spifc_a1_set_addr(spifc, op->addr.val, addr_cfg);
> +	}
> +
> +	if (op->dummy.nbytes) {
> +		dummy_cfg = SPIFC_A1_USER_DUMMY(op);
> +		meson_spifc_a1_set_dummy(spifc, dummy_cfg);
> +	}
> +
> +	if (!op->data.nbytes)
> +		return meson_spifc_a1_request(spifc, false);
> +
> +	dmode = ilog2(op->data.buswidth);
> +	off = 0;
> +
> +	do {
> +		size_t block_size = min_t(size_t, nbytes, SPIFC_A1_BUFFER_SIZE);
> +
> +		meson_spifc_a1_set_cmd(spifc, cmd_cfg);
> +
> +		if (op->addr.nbytes)
> +			meson_spifc_a1_set_addr(spifc, op->addr.val + off,
> +						addr_cfg);
> +
> +		if (op->dummy.nbytes)
> +			meson_spifc_a1_set_dummy(spifc, dummy_cfg);
> +
> +		writel(0, spifc->base + SPIFC_A1_USER_DBUF_ADDR_REG);
> +
> +		if (op->data.dir == SPI_MEM_DATA_IN)
> +			ret = meson_spifc_a1_read(spifc, op->data.buf.in + off,
> +						  block_size, dmode);
> +		else
> +			ret = meson_spifc_a1_write(spifc,
> +						   op->data.buf.out + off,
> +						   block_size, dmode);
> +
> +		nbytes -= block_size;
> +		off += block_size;
> +	} while (nbytes != 0 && !ret);
> +
> +	return ret;
> +}
> +
> +static void meson_spifc_a1_hw_init(struct meson_spifc_a1 *spifc)
> +{
> +	u32 regv;
> +
> +	regv = readl(spifc->base + SPIFC_A1_AHB_REQ_CTRL_REG);
> +	regv &= ~(SPIFC_A1_AHB_REQ_ENABLE);
> +	writel(regv, spifc->base + SPIFC_A1_AHB_REQ_CTRL_REG);
> +
> +	regv = readl(spifc->base + SPIFC_A1_AHB_CTRL_REG);
> +	regv &= ~(SPIFC_A1_AHB_BUS_EN);
> +	writel(regv, spifc->base + SPIFC_A1_AHB_CTRL_REG);
> +
> +	writel(SPIFC_A1_ACTIMING0_VAL, spifc->base + SPIFC_A1_ACTIMING0_REG);
> +
> +	writel(0, spifc->base + SPIFC_A1_USER_DBUF_ADDR_REG);
> +}
> +
> +static const struct spi_controller_mem_ops meson_spifc_a1_mem_ops = {
> +	.exec_op = meson_spifc_a1_exec_op,
> +};
> +
> +static int meson_spifc_a1_probe(struct platform_device *pdev)
> +{
> +	struct spi_controller *ctrl;
> +	struct meson_spifc_a1 *spifc;
> +	int ret;
> +
> +	ctrl = devm_spi_alloc_master(&pdev->dev, sizeof(*spifc));
> +	if (!ctrl)
> +		return -ENOMEM;
> +
> +	spifc = spi_controller_get_devdata(ctrl);
> +	platform_set_drvdata(pdev, spifc);
> +
> +	spifc->dev = &pdev->dev;
> +	spifc->ctrl = ctrl;
> +
> +	spifc->base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(spifc->base))
> +		return PTR_ERR(spifc->base);
> +
> +	spifc->clk = devm_clk_get_enabled(spifc->dev, NULL);
> +	if (IS_ERR(spifc->clk))
> +		return dev_err_probe(spifc->dev, PTR_ERR(spifc->clk),
> +				     "unable to get clock\n");
> +
> +	meson_spifc_a1_hw_init(spifc);
> +
> +	pm_runtime_set_autosuspend_delay(spifc->dev, 500);
> +	pm_runtime_use_autosuspend(spifc->dev);
> +	devm_pm_runtime_enable(spifc->dev);
> +
> +	ctrl->num_chipselect = 1;
> +	ctrl->dev.of_node = pdev->dev.of_node;
> +	ctrl->bits_per_word_mask = SPI_BPW_MASK(8);
> +	ctrl->auto_runtime_pm = true;
> +	ctrl->mem_ops = &meson_spifc_a1_mem_ops;
> +	ctrl->min_speed_hz = SPIFC_A1_MIN_HZ;
> +	ctrl->max_speed_hz = SPIFC_A1_MAX_HZ;
> +	ctrl->mode_bits = (SPI_RX_DUAL | SPI_TX_DUAL |
> +			   SPI_RX_QUAD | SPI_TX_QUAD);
> +
> +	ret = devm_spi_register_controller(spifc->dev, ctrl);
> +	if (ret)
> +		return dev_err_probe(spifc->dev, ret,
> +				     "failed to register spi controller\n");
> +
> +	return 0;
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int meson_spifc_a1_suspend(struct device *dev)
> +{
> +	struct meson_spifc_a1 *spifc = dev_get_drvdata(dev);
> +	int ret;
> +
> +	ret = spi_controller_suspend(spifc->ctrl);
> +	if (ret)
> +		return ret;
> +
> +	if (!pm_runtime_suspended(dev))
> +		clk_disable_unprepare(spifc->clk);
> +
> +	return 0;
> +}
> +
> +static int meson_spifc_a1_resume(struct device *dev)
> +{
> +	struct meson_spifc_a1 *spifc = dev_get_drvdata(dev);
> +	int ret = 0;
> +
> +	if (!pm_runtime_suspended(dev)) {
> +		ret = clk_prepare_enable(spifc->clk);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	meson_spifc_a1_hw_init(spifc);
> +
> +	ret = spi_controller_resume(spifc->ctrl);
> +	if (ret)
> +		clk_disable_unprepare(spifc->clk);
> +
> +	return ret;
> +}
> +#endif /* CONFIG_PM_SLEEP */
> +
> +#ifdef CONFIG_PM
> +static int meson_spifc_a1_runtime_suspend(struct device *dev)
> +{
> +	struct meson_spifc_a1 *spifc = dev_get_drvdata(dev);
> +
> +	clk_disable_unprepare(spifc->clk);
> +
> +	return 0;
> +}
> +
> +static int meson_spifc_a1_runtime_resume(struct device *dev)
> +{
> +	struct meson_spifc_a1 *spifc = dev_get_drvdata(dev);
> +	int ret;
> +
> +	ret = clk_prepare_enable(spifc->clk);
> +	if (!ret)
> +		meson_spifc_a1_hw_init(spifc);
> +
> +	return ret;
> +}
> +#endif /* CONFIG_PM */
> +
> +static const struct dev_pm_ops meson_spifc_a1_pm_ops = {
> +	SET_SYSTEM_SLEEP_PM_OPS(meson_spifc_a1_suspend, meson_spifc_a1_resume)
> +	SET_RUNTIME_PM_OPS(meson_spifc_a1_runtime_suspend,
> +			   meson_spifc_a1_runtime_resume,
> +			   NULL)
> +};
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id meson_spifc_a1_dt_match[] = {
> +	{ .compatible = "amlogic,meson-a1-spifc", },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, meson_spifc_a1_dt_match);
> +#endif /* CONFIG_OF */
> +
> +static struct platform_driver meson_spifc_a1_driver = {
> +	.probe	= meson_spifc_a1_probe,
> +	.driver	= {
> +		.name		= "meson-spifc-a1",
> +		.of_match_table	= of_match_ptr(meson_spifc_a1_dt_match),
> +		.pm		= &meson_spifc_a1_pm_ops,
> +	},
> +};
> +module_platform_driver(meson_spifc_a1_driver);
> +
> +MODULE_AUTHOR("Martin Kurbanov <mmkurbanov@sberdevices.ru>");
> +MODULE_DESCRIPTION("Amlogic Meson A1 SPIFC driver");
> +MODULE_LICENSE("GPL");

Looks really clean, drop meson everywhere in favor to amlogic and rename to spi-amlogic-a1.

It looks like a bold move, but we started dropping the meson name for a
while now in bindings, but I think it's time to drop meson in driver
name for new SoCs which aren't related to the old Set-Top-Box SoC
seris which were named "Meson".

Since it's a new driver, it's the right moment :-)

Thanks,
Neil