[3/4] staging: rtl8192e: priv->rf_type is always RF_1T2R
Commit Message
The value of priv->rf_type is always RF_1T2R. Remove if statements
that check for priv->rf_type == RF_1T2R and remove resulting dead
code.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
---
.../staging/rtl8192e/rtl8192e/r8192E_dev.c | 13 ++++-------
.../staging/rtl8192e/rtl8192e/r8192E_phy.c | 7 ++----
drivers/staging/rtl8192e/rtl8192e/rtl_dm.c | 23 +++++++------------
3 files changed, 14 insertions(+), 29 deletions(-)
@@ -540,8 +540,7 @@ static void _rtl92e_hwconfig(struct net_device *dev)
u32 ratr_value;
ratr_value = regRATR;
- if (priv->rf_type == RF_1T2R)
- ratr_value &= ~(RATE_ALL_OFDM_2SS);
+ ratr_value &= ~(RATE_ALL_OFDM_2SS);
rtl92e_writel(dev, RATR0, ratr_value);
rtl92e_writeb(dev, UFWP, 1);
}
@@ -1886,14 +1885,10 @@ void rtl92e_update_ratr_table(struct net_device *dev)
break;
case IEEE_N_24G:
case IEEE_N_5G:
- if (ieee->ht_info->peer_mimo_ps == 0) {
+ if (ieee->ht_info->peer_mimo_ps == 0)
ratr_value &= 0x0007F007;
- } else {
- if (priv->rf_type == RF_1T2R)
- ratr_value &= 0x000FF007;
- else
- ratr_value &= 0x0F81F007;
- }
+ else
+ ratr_value &= 0x000FF007;
break;
default:
break;
@@ -281,14 +281,11 @@ static void _rtl92e_phy_config_bb(struct net_device *dev, u8 ConfigType)
u32 *Rtl819XPHY_REGArray_Table = NULL;
u32 *Rtl819XAGCTAB_Array_Table = NULL;
u16 AGCTAB_ArrayLen, PHY_REGArrayLen = 0;
- struct r8192_priv *priv = rtllib_priv(dev);
AGCTAB_ArrayLen = RTL8192E_AGCTAB_ARR_LEN;
Rtl819XAGCTAB_Array_Table = RTL8192E_AGCTAB_ARR;
- if (priv->rf_type == RF_1T2R) {
- PHY_REGArrayLen = RTL8192E_PHY_REG_1T2R_ARR_LEN;
- Rtl819XPHY_REGArray_Table = RTL8192E_PHY_REG_1T2R_ARR;
- }
+ PHY_REGArrayLen = RTL8192E_PHY_REG_1T2R_ARR_LEN;
+ Rtl819XPHY_REGArray_Table = RTL8192E_PHY_REG_1T2R_ARR;
if (ConfigType == BB_CONFIG_PHY_REG) {
for (i = 0; i < PHY_REGArrayLen; i += 2) {
@@ -272,19 +272,14 @@ void rtl92e_init_adaptive_rate(struct net_device *dev)
pra->ping_rssi_enable = 0;
pra->ping_rssi_thresh_for_ra = 15;
-
- if (priv->rf_type == RF_1T2R) {
- pra->upper_rssi_threshold_ratr = 0x000fc000;
- pra->middle_rssi_threshold_ratr = 0x000ff000;
- pra->low_rssi_threshold_ratr = 0x000ff001;
- pra->low_rssi_threshold_ratr_40M = 0x000ff005;
- pra->low_rssi_threshold_ratr_20M = 0x000ff001;
- pra->ping_rssi_ratr = 0x0000000d;
- }
-
+ pra->upper_rssi_threshold_ratr = 0x000fc000;
+ pra->middle_rssi_threshold_ratr = 0x000ff000;
+ pra->low_rssi_threshold_ratr = 0x000ff001;
+ pra->low_rssi_threshold_ratr_40M = 0x000ff005;
+ pra->low_rssi_threshold_ratr_20M = 0x000ff001;
+ pra->ping_rssi_ratr = 0x0000000d;
}
-
static void _rtl92e_dm_check_rate_adaptive(struct net_device *dev)
{
struct r8192_priv *priv = rtllib_priv(dev);
@@ -383,8 +378,7 @@ static void _rtl92e_dm_check_rate_adaptive(struct net_device *dev)
u32 ratr_value;
ratr_value = targetRATR;
- if (priv->rf_type == RF_1T2R)
- ratr_value &= ~(RATE_ALL_OFDM_2SS);
+ ratr_value &= ~(RATE_ALL_OFDM_2SS);
rtl92e_writel(dev, RATR0, ratr_value);
rtl92e_writeb(dev, UFWP, 1);
@@ -981,8 +975,7 @@ void rtl92e_dm_restore_state(struct net_device *dev)
priv->rtllib->mode == WIRELESS_MODE_N_5G))
return;
ratr_value = reg_ratr;
- if (priv->rf_type == RF_1T2R)
- ratr_value &= ~(RATE_ALL_OFDM_2SS);
+ ratr_value &= ~(RATE_ALL_OFDM_2SS);
rtl92e_writel(dev, RATR0, ratr_value);
rtl92e_writeb(dev, UFWP, 1);
if (priv->tx_pwr_tracking_init && priv->btxpower_tracking)