diff mbox series

[RESEND,4/4] arm64: dts: qcom: qrb5165-rb5: Use proper WSA881x shutdown GPIO polarity

Message ID 20230322193051.826167-5-krzysztof.kozlowski@linaro.org
State New
Headers
Series arm64: dts: qcom: Use proper WSA881x shutdown GPIO polarity |

Commit Message

Krzysztof Kozlowski March 22, 2023, 7:30 p.m. UTC 
  The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed
DTS always comes with active high.  Since Linux drivers were updated to
handle proper flag, correct the DTS.

The change is not backwards compatible with older Linux kernel.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index aa0a7bd7307c..dd924331b0ee 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -1012,7 +1012,7 @@  &swr0 {
 	left_spkr: speaker@0,3 {
 		compatible = "sdw10217211000";
 		reg = <0 3>;
-		powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>;
+		powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
 		#thermal-sensor-cells = <0>;
 		sound-name-prefix = "SpkrLeft";
 		#sound-dai-cells = <0>;
@@ -1021,7 +1021,7 @@  left_spkr: speaker@0,3 {
 	right_spkr: speaker@0,4 {
 		compatible = "sdw10217211000";
 		reg = <0 4>;
-		powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>;
+		powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
 		#thermal-sensor-cells = <0>;
 		sound-name-prefix = "SpkrRight";
 		#sound-dai-cells = <0>;