diff mbox series

[1/2] thermal/governors/step_wise: delete obsolete comment

Message ID 20230321054714.76287-1-rui.zhang@intel.com
State New
Headers
Series [1/2] thermal/governors/step_wise: delete obsolete comment |

Commit Message

Zhang, Rui March 21, 2023, 5:47 a.m. UTC 
  Commit 4102c4042a33 ("thermal/core: Remove DROP_FULL and RAISE_FULL")
removes support for THERMAL_TREND_RAISE_FULL/DROP_FULL but leaves the
comment unchanged.

Delete the obsolte comment about THERMAL_TREND_RAISE_FULL/DROP_FULL.

Fixes: 4102c4042a33 ("thermal/core: Remove DROP_FULL and RAISE_FULL")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
---
 drivers/thermal/gov_step_wise.c | 8 --------
 1 file changed, 8 deletions(-)

Comments

Rafael J. Wysocki April 27, 2023, 5:07 p.m. UTC | #1 
On Tue, Mar 21, 2023 at 6:47 AM Zhang Rui <rui.zhang@intel.com> wrote:
>
> Commit 4102c4042a33 ("thermal/core: Remove DROP_FULL and RAISE_FULL")
> removes support for THERMAL_TREND_RAISE_FULL/DROP_FULL but leaves the
> comment unchanged.
>
> Delete the obsolte comment about THERMAL_TREND_RAISE_FULL/DROP_FULL.
>
> Fixes: 4102c4042a33 ("thermal/core: Remove DROP_FULL and RAISE_FULL")
> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
> ---
>  drivers/thermal/gov_step_wise.c | 8 --------
>  1 file changed, 8 deletions(-)
>
> diff --git a/drivers/thermal/gov_step_wise.c b/drivers/thermal/gov_step_wise.c
> index 31235e169c5a..7a760b6a4279 100644
> --- a/drivers/thermal/gov_step_wise.c
> +++ b/drivers/thermal/gov_step_wise.c
> @@ -21,19 +21,11 @@
>   *    a. if the trend is THERMAL_TREND_RAISING, use higher cooling
>   *       state for this trip point
>   *    b. if the trend is THERMAL_TREND_DROPPING, do nothing
> - *    c. if the trend is THERMAL_TREND_RAISE_FULL, use upper limit
> - *       for this trip point
> - *    d. if the trend is THERMAL_TREND_DROP_FULL, use lower limit
> - *       for this trip point
>   * If the temperature is lower than a trip point,
>   *    a. if the trend is THERMAL_TREND_RAISING, do nothing
>   *    b. if the trend is THERMAL_TREND_DROPPING, use lower cooling
>   *       state for this trip point, if the cooling state already
>   *       equals lower limit, deactivate the thermal instance
> - *    c. if the trend is THERMAL_TREND_RAISE_FULL, do nothing
> - *    d. if the trend is THERMAL_TREND_DROP_FULL, use lower limit,
> - *       if the cooling state already equals lower limit,
> - *       deactivate the thermal instance
>   */
>  static unsigned long get_target_state(struct thermal_instance *instance,
>                                 enum thermal_trend trend, bool throttle)
> --

Applied as 6.4-rc material along with the [2/2], thanks!
diff mbox series

Patch

diff --git a/drivers/thermal/gov_step_wise.c b/drivers/thermal/gov_step_wise.c
index 31235e169c5a..7a760b6a4279 100644
--- a/drivers/thermal/gov_step_wise.c
+++ b/drivers/thermal/gov_step_wise.c
@@ -21,19 +21,11 @@ 
  *    a. if the trend is THERMAL_TREND_RAISING, use higher cooling
  *       state for this trip point
  *    b. if the trend is THERMAL_TREND_DROPPING, do nothing
- *    c. if the trend is THERMAL_TREND_RAISE_FULL, use upper limit
- *       for this trip point
- *    d. if the trend is THERMAL_TREND_DROP_FULL, use lower limit
- *       for this trip point
  * If the temperature is lower than a trip point,
  *    a. if the trend is THERMAL_TREND_RAISING, do nothing
  *    b. if the trend is THERMAL_TREND_DROPPING, use lower cooling
  *       state for this trip point, if the cooling state already
  *       equals lower limit, deactivate the thermal instance
- *    c. if the trend is THERMAL_TREND_RAISE_FULL, do nothing
- *    d. if the trend is THERMAL_TREND_DROP_FULL, use lower limit,
- *       if the cooling state already equals lower limit,
- *       deactivate the thermal instance
  */
 static unsigned long get_target_state(struct thermal_instance *instance,
 				enum thermal_trend trend, bool throttle)