[v3,2/5] phy: starfive: add JH7110 PCIE 2.0 and USB 2.0 PHY driver.
Commit Message
Add Starfive JH7110 SoC PCIe 2.0 and USB 2.0 PHY driver support.
PCIe 2.0 PHY can used as USB 3.0 PHY
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
---
MAINTAINERS | 8 ++
drivers/phy/starfive/Kconfig | 22 ++++
drivers/phy/starfive/Makefile | 2 +
drivers/phy/starfive/phy-jh7110-pcie.c | 136 ++++++++++++++++++++
drivers/phy/starfive/phy-jh7110-usb.c | 167 +++++++++++++++++++++++++
5 files changed, 335 insertions(+)
create mode 100644 drivers/phy/starfive/phy-jh7110-pcie.c
create mode 100644 drivers/phy/starfive/phy-jh7110-usb.c
Comments
On 15-03-23, 18:44, Minda Chen wrote:
> Add Starfive JH7110 SoC PCIe 2.0 and USB 2.0 PHY driver support.
> PCIe 2.0 PHY can used as USB 3.0 PHY
>
> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
> ---
> MAINTAINERS | 8 ++
> drivers/phy/starfive/Kconfig | 22 ++++
> drivers/phy/starfive/Makefile | 2 +
> drivers/phy/starfive/phy-jh7110-pcie.c | 136 ++++++++++++++++++++
> drivers/phy/starfive/phy-jh7110-usb.c | 167 +++++++++++++++++++++++++
> 5 files changed, 335 insertions(+)
> create mode 100644 drivers/phy/starfive/phy-jh7110-pcie.c
> create mode 100644 drivers/phy/starfive/phy-jh7110-usb.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 8361b8e710ca..4263c005e45c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19977,6 +19977,14 @@ S: Supported
> F: Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-rx.yaml
> F: drivers/phy/starfive/phy-starfive-dphy-rx.c
>
> +STARFIVE JH71X0 PCIE AND USB PHY DRIVER
> +M: Emil Renner Berthing <kernel@esmil.dk>
> +M: Minda Chen <minda.chen@starfivetech.com>
> +S: Supported
> +F: Documentation/devicetree/bindings/phy/starfive,jh7110-usb-pcie-phy.yaml
> +F: drivers/phy/starfive/phy-jh7110-pcie.c
> +F: drivers/phy/starfive/phy-jh7110-usb.c
> +
> STATIC BRANCH/CALL
> M: Peter Zijlstra <peterz@infradead.org>
> M: Josh Poimboeuf <jpoimboe@kernel.org>
> diff --git a/drivers/phy/starfive/Kconfig b/drivers/phy/starfive/Kconfig
> index e449a662acf5..dd0f139b5bfb 100644
> --- a/drivers/phy/starfive/Kconfig
> +++ b/drivers/phy/starfive/Kconfig
> @@ -11,3 +11,25 @@ config PHY_STARFIVE_DPHY_RX
> Choose this option if you have a Starfive D-PHY in your
> system. If M is selected, the module will be called
> phy-starfive-dphy-rx.
> +
> +config PHY_STARFIVE_JH7110_USB
> + tristate "Starfive JH7110 USB 2.0 PHY support"
> + depends on USB_SUPPORT
> + select GENERIC_PHY
> + select USB_PHY
> + help
> + Enable this to support the StarFive USB 2.0 PHY,
> + used with the Cadence USB controller.
> + If M is selected, the module will be called
> + phy-jh7110-usb.ko.
> +
> +config PHY_STARFIVE_JH7110_PCIE
Sorted alphabetically please
> + tristate "Starfive JH7110 PCIE 2.0/USB 3.0 PHY support"
> + depends on USB_SUPPORT
> + select GENERIC_PHY
> + select USB_PHY
> + help
> + Enable this to support the StarFive PCIe 2.0 PHY,
> + or used as USB 3.0 PHY.
> + If M is selected, the module will be called
> + phy-jh7110-pcie.ko.
> diff --git a/drivers/phy/starfive/Makefile b/drivers/phy/starfive/Makefile
> index 7ec576cb30ae..c3eaf1b34cbb 100644
> --- a/drivers/phy/starfive/Makefile
> +++ b/drivers/phy/starfive/Makefile
> @@ -1,2 +1,4 @@
> # SPDX-License-Identifier: GPL-2.0
> obj-$(CONFIG_PHY_STARFIVE_DPHY_RX) += phy-starfive-dphy-rx.o
> +obj-$(CONFIG_PHY_STARFIVE_JH7110_USB) += phy-jh7110-usb.o
> +obj-$(CONFIG_PHY_STARFIVE_JH7110_PCIE) += phy-jh7110-pcie.o
Here also
> diff --git a/drivers/phy/starfive/phy-jh7110-pcie.c b/drivers/phy/starfive/phy-jh7110-pcie.c
> new file mode 100644
> index 000000000000..30a8fa1f580d
> --- /dev/null
> +++ b/drivers/phy/starfive/phy-jh7110-pcie.c
> @@ -0,0 +1,136 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * StarFive JH7110 PCIe 2.0 PHY driver
> + *
> + * Copyright (C) 2023 Minda Chen <minda.chen@starfivetech.com>
> + */
> +
> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +
> +#define PCIE_KVCO_LEVEL_OFF (0x28)
> +#define PCIE_USB3_PHY_PLL_CTL_OFF (0x7c)
> +#define PCIE_KVCO_TUNE_SIGNAL_OFF (0x80)
> +#define PCIE_USB3_PHY_ENABLE BIT(4)
> +#define PHY_KVCO_FINE_TUNE_LEVEL 0x91
> +#define PHY_KVCO_FINE_TUNE_SIGNALS 0xc
> +
> +struct jh7110_pcie_phy {
> + struct phy *phy;
> + void __iomem *regs;
> + enum phy_mode mode;
> +};
> +
> +static void jh7110_usb3_mode_set(struct jh7110_pcie_phy *phy)
> +{
> + /* Configuare spread-spectrum mode: down-spread-spectrum */
> + writel(PCIE_USB3_PHY_ENABLE, phy->regs + PCIE_USB3_PHY_PLL_CTL_OFF);
> +}
> +
> +static void jh7110_pcie_mode_set(struct jh7110_pcie_phy *phy)
> +{
> + /* PCIe Multi-PHY PLL KVCO Gain fine tune settings: */
> + writel(PHY_KVCO_FINE_TUNE_LEVEL, phy->regs + PCIE_KVCO_LEVEL_OFF);
> + writel(PHY_KVCO_FINE_TUNE_SIGNALS, phy->regs + PCIE_KVCO_TUNE_SIGNAL_OFF);
> +}
> +
> +static int jh7110_pcie_phy_set_mode(struct phy *_phy,
> + enum phy_mode mode, int submode)
> +{
> + struct jh7110_pcie_phy *phy = phy_get_drvdata(_phy);
> +
> + if (mode != phy->mode) {
> + switch (mode) {
> + case PHY_MODE_USB_HOST:
> + case PHY_MODE_USB_DEVICE:
> + case PHY_MODE_USB_OTG:
> + jh7110_usb3_mode_set(phy);
> + break;
> + case PHY_MODE_PCIE:
> + jh7110_pcie_mode_set(phy);
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + dev_info(&_phy->dev, "Changing phy mode to %d\n", mode);
> + phy->mode = mode;
> + }
> +
> + return 0;
> +}
> +
> +static int jh7110_pcie_phy_init(struct phy *_phy)
> +{
> + return 0;
> +}
> +
> +static int jh7110_pcie_phy_exit(struct phy *_phy)
> +{
> + return 0;
> +}
> +
> +static const struct phy_ops jh7110_pcie_phy_ops = {
> + .init = jh7110_pcie_phy_init,
> + .exit = jh7110_pcie_phy_exit,
> + .set_mode = jh7110_pcie_phy_set_mode,
> + .owner = THIS_MODULE,
> +};
> +
> +static int jh7110_pcie_phy_probe(struct platform_device *pdev)
> +{
> + struct jh7110_pcie_phy *phy;
> + struct device *dev = &pdev->dev;
> + struct phy_provider *phy_provider;
> +
> + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
> + if (!phy)
> + return -ENOMEM;
> +
> + phy->regs = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(phy->regs))
> + return PTR_ERR(phy->regs);
> +
> + phy->phy = devm_phy_create(dev, NULL, &jh7110_pcie_phy_ops);
> + if (IS_ERR(phy->phy))
> + return dev_err_probe(dev, PTR_ERR(phy->regs),
> + "Failed to map phy base\n");
> +
> + platform_set_drvdata(pdev, phy);
> + phy_set_drvdata(phy->phy, phy);
> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> +
> + return PTR_ERR_OR_ZERO(phy_provider);
> +}
> +
> +static int jh7110_pcie_phy_remove(struct platform_device *pdev)
> +{
> + platform_set_drvdata(pdev, NULL);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id jh7110_pcie_phy_of_match[] = {
> + { .compatible = "starfive,jh7110-pcie-phy" },
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, jh7110_pcie_phy_of_match);
> +
> +static struct platform_driver jh7110_pcie_phy_driver = {
> + .probe = jh7110_pcie_phy_probe,
> + .remove = jh7110_pcie_phy_remove,
> + .driver = {
> + .of_match_table = jh7110_pcie_phy_of_match,
> + .name = "jh7110-pcie-phy",
> + }
> +};
> +module_platform_driver(jh7110_pcie_phy_driver);
> +
> +MODULE_DESCRIPTION("StarFive JH7110 PCIe 2.0 PHY driver");
> +MODULE_AUTHOR("Minda Chen <minda.chen@starfivetech.com>");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/phy/starfive/phy-jh7110-usb.c b/drivers/phy/starfive/phy-jh7110-usb.c
> new file mode 100644
> index 000000000000..89db0b7b1224
> --- /dev/null
> +++ b/drivers/phy/starfive/phy-jh7110-usb.c
> @@ -0,0 +1,167 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * StarFive JH7110 USB 2.0 PHY driver
Since these two seem to be different driver, pls split the patches to
two, one for each phy driver
> + *
> + * Copyright (C) 2023 Minda Chen <minda.chen@starfivetech.com>
> + */
> +
> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/usb/of.h>
> +
> +#define USB_125M_CLK_RATE 125000000
> +#define USB_LS_KEEPALIVE_OFF 0x4
> +#define USB_LS_KEEPALIVE_ENABLE BIT(4)
> +
> +struct jh7110_usb2_phy {
> + struct phy *phy;
> + void __iomem *regs;
> + struct clk *usb_125m_clk;
> + struct clk *app_125;
> + enum usb_dr_mode dr_mode;
> +};
> +
> +static void jh7110_usb2_mode_set(struct jh7110_usb2_phy *phy)
> +{
> + unsigned int val;
> +
> + if (phy->dr_mode != USB_DR_MODE_PERIPHERAL) {
> + /* Enable the LS speed keep-alive signal */
> + val = readl(phy->regs + USB_LS_KEEPALIVE_OFF);
> + val |= USB_LS_KEEPALIVE_ENABLE;
> + writel(val, phy->regs + USB_LS_KEEPALIVE_OFF);
> + }
> +}
> +
> +static int jh7110_usb2_phy_set_mode(struct phy *_phy,
> + enum phy_mode mode, int submode)
> +{
> + struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy);
> + int new_mode;
> +
> + switch (mode) {
> + case PHY_MODE_USB_HOST:
> + new_mode = USB_DR_MODE_HOST;
> + break;
> + case PHY_MODE_USB_DEVICE:
> + new_mode = USB_DR_MODE_PERIPHERAL;
> + break;
> + case PHY_MODE_USB_OTG:
> + new_mode = USB_DR_MODE_OTG;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + if (new_mode != phy->dr_mode) {
> + dev_info(&_phy->dev, "Changing dr_mode to %d\n", new_mode);
> + phy->dr_mode = new_mode;
> + jh7110_usb2_mode_set(phy);
> + }
> +
> + return 0;
> +}
> +
> +static int jh7110_usb2_phy_init(struct phy *_phy)
> +{
> + struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy);
> + int ret;
> +
> + ret = clk_set_rate(phy->usb_125m_clk, USB_125M_CLK_RATE);
> + if (ret)
> + return ret;
> +
> + ret = clk_prepare_enable(phy->app_125);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int jh7110_usb2_phy_exit(struct phy *_phy)
> +{
> + struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy);
> +
> + clk_disable_unprepare(phy->app_125);
> +
> + return 0;
> +}
> +
> +static const struct phy_ops jh7110_usb2_phy_ops = {
> + .init = jh7110_usb2_phy_init,
> + .exit = jh7110_usb2_phy_exit,
> + .set_mode = jh7110_usb2_phy_set_mode,
> + .owner = THIS_MODULE,
> +};
> +
> +static int jh7110_usb_phy_probe(struct platform_device *pdev)
> +{
> + struct jh7110_usb2_phy *phy;
> + struct device *dev = &pdev->dev;
> + struct phy_provider *phy_provider;
> +
> + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
> + if (!phy)
> + return -ENOMEM;
> +
> + phy->usb_125m_clk = devm_clk_get(dev, "125m");
> + if (IS_ERR(phy->usb_125m_clk))
> + return dev_err_probe(dev, PTR_ERR(phy->usb_125m_clk),
> + "Failed to get 125m clock\n");
> +
> + phy->app_125 = devm_clk_get(dev, "app_125");
> + if (IS_ERR(phy->app_125))
> + return dev_err_probe(dev, PTR_ERR(phy->app_125),
> + "Failed to get app 125m clock\n");
> +
> + phy->regs = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(phy->regs))
> + return dev_err_probe(dev, PTR_ERR(phy->regs),
> + "Failed to map phy base\n");
> +
> + phy->phy = devm_phy_create(dev, NULL, &jh7110_usb2_phy_ops);
> + if (IS_ERR(phy->phy))
> + return dev_err_probe(dev, PTR_ERR(phy->phy),
> + "Failed to create phy\n");
> +
> + platform_set_drvdata(pdev, phy);
> + phy_set_drvdata(phy->phy, phy);
> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> +
> + return PTR_ERR_OR_ZERO(phy_provider);
> +}
> +
> +static int jh7110_usb_phy_remove(struct platform_device *pdev)
> +{
> + struct jh7110_usb2_phy *phy = platform_get_drvdata(pdev);
> +
> + clk_disable_unprepare(phy->app_125);
> + platform_set_drvdata(pdev, NULL);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id jh7110_usb_phy_of_match[] = {
> + { .compatible = "starfive,jh7110-usb-phy" },
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, jh7110_usb_phy_of_match);
> +
> +static struct platform_driver jh7110_usb_phy_driver = {
> + .probe = jh7110_usb_phy_probe,
> + .remove = jh7110_usb_phy_remove,
> + .driver = {
> + .of_match_table = jh7110_usb_phy_of_match,
> + .name = "jh7110-usb-phy",
> + }
> +};
> +module_platform_driver(jh7110_usb_phy_driver);
> +
> +MODULE_DESCRIPTION("StarFive JH7110 USB 2.0 PHY driver");
> +MODULE_AUTHOR("Minda Chen <minda.chen@starfivetech.com>");
> +MODULE_LICENSE("GPL");
> --
> 2.17.1
On 2023/3/20 16:55, Vinod Koul wrote:
> On 15-03-23, 18:44, Minda Chen wrote:
>> Add Starfive JH7110 SoC PCIe 2.0 and USB 2.0 PHY driver support.
>> PCIe 2.0 PHY can used as USB 3.0 PHY
>>
>> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
>> ---
>> MAINTAINERS | 8 ++
>> drivers/phy/starfive/Kconfig | 22 ++++
>> drivers/phy/starfive/Makefile | 2 +
>> drivers/phy/starfive/phy-jh7110-pcie.c | 136 ++++++++++++++++++++
>> drivers/phy/starfive/phy-jh7110-usb.c | 167 +++++++++++++++++++++++++
>> 5 files changed, 335 insertions(+)
>> create mode 100644 drivers/phy/starfive/phy-jh7110-pcie.c
>> create mode 100644 drivers/phy/starfive/phy-jh7110-usb.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 8361b8e710ca..4263c005e45c 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -19977,6 +19977,14 @@ S: Supported
>> F: Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-rx.yaml
>> F: drivers/phy/starfive/phy-starfive-dphy-rx.c
>>
>> +STARFIVE JH71X0 PCIE AND USB PHY DRIVER
>> +M: Emil Renner Berthing <kernel@esmil.dk>
>> +M: Minda Chen <minda.chen@starfivetech.com>
>> +S: Supported
>> +F: Documentation/devicetree/bindings/phy/starfive,jh7110-usb-pcie-phy.yaml
>> +F: drivers/phy/starfive/phy-jh7110-pcie.c
>> +F: drivers/phy/starfive/phy-jh7110-usb.c
>> +
>> STATIC BRANCH/CALL
>> M: Peter Zijlstra <peterz@infradead.org>
>> M: Josh Poimboeuf <jpoimboe@kernel.org>
>> diff --git a/drivers/phy/starfive/Kconfig b/drivers/phy/starfive/Kconfig
>> index e449a662acf5..dd0f139b5bfb 100644
>> --- a/drivers/phy/starfive/Kconfig
>> +++ b/drivers/phy/starfive/Kconfig
>> @@ -11,3 +11,25 @@ config PHY_STARFIVE_DPHY_RX
>> Choose this option if you have a Starfive D-PHY in your
>> system. If M is selected, the module will be called
>> phy-starfive-dphy-rx.
>> +
>> +config PHY_STARFIVE_JH7110_USB
>> + tristate "Starfive JH7110 USB 2.0 PHY support"
>> + depends on USB_SUPPORT
>> + select GENERIC_PHY
>> + select USB_PHY
>> + help
>> + Enable this to support the StarFive USB 2.0 PHY,
>> + used with the Cadence USB controller.
>> + If M is selected, the module will be called
>> + phy-jh7110-usb.ko.
>> +
>> +config PHY_STARFIVE_JH7110_PCIE
>
> Sorted alphabetically please
>
>> + tristate "Starfive JH7110 PCIE 2.0/USB 3.0 PHY support"
>> + depends on USB_SUPPORT
>> + select GENERIC_PHY
>> + select USB_PHY
>> + help
>> + Enable this to support the StarFive PCIe 2.0 PHY,
>> + or used as USB 3.0 PHY.
>> + If M is selected, the module will be called
>> + phy-jh7110-pcie.ko.
>> diff --git a/drivers/phy/starfive/Makefile b/drivers/phy/starfive/Makefile
>> index 7ec576cb30ae..c3eaf1b34cbb 100644
>> --- a/drivers/phy/starfive/Makefile
>> +++ b/drivers/phy/starfive/Makefile
>> @@ -1,2 +1,4 @@
>> # SPDX-License-Identifier: GPL-2.0
>> obj-$(CONFIG_PHY_STARFIVE_DPHY_RX) += phy-starfive-dphy-rx.o
>> +obj-$(CONFIG_PHY_STARFIVE_JH7110_USB) += phy-jh7110-usb.o
>> +obj-$(CONFIG_PHY_STARFIVE_JH7110_PCIE) += phy-jh7110-pcie.o
>
> Here also
>
ok， thanks
>> diff --git a/drivers/phy/starfive/phy-jh7110-pcie.c b/drivers/phy/starfive/phy-jh7110-pcie.c
>> new file mode 100644
>> index 000000000000..30a8fa1f580d
>> --- /dev/null
>> +++ b/drivers/phy/starfive/phy-jh7110-pcie.c
>> @@ -0,0 +1,136 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * StarFive JH7110 PCIe 2.0 PHY driver
>> + *
>> + * Copyright (C) 2023 Minda Chen <minda.chen@starfivetech.com>
>> + */
>> +
>> +#include <linux/bits.h>
>> +#include <linux/clk.h>
>> +#include <linux/err.h>
>> +#include <linux/io.h>
>> +#include <linux/module.h>
>> +#include <linux/phy/phy.h>
>> +#include <linux/platform_device.h>
>> +
>> +#define PCIE_KVCO_LEVEL_OFF (0x28)
>> +#define PCIE_USB3_PHY_PLL_CTL_OFF (0x7c)
>> +#define PCIE_KVCO_TUNE_SIGNAL_OFF (0x80)
>> +#define PCIE_USB3_PHY_ENABLE BIT(4)
>> +#define PHY_KVCO_FINE_TUNE_LEVEL 0x91
>> +#define PHY_KVCO_FINE_TUNE_SIGNALS 0xc
>> +
>> +struct jh7110_pcie_phy {
>> + struct phy *phy;
>> + void __iomem *regs;
>> + enum phy_mode mode;
>> +};
>> +
>> +static void jh7110_usb3_mode_set(struct jh7110_pcie_phy *phy)
>> +{
>> + /* Configuare spread-spectrum mode: down-spread-spectrum */
>> + writel(PCIE_USB3_PHY_ENABLE, phy->regs + PCIE_USB3_PHY_PLL_CTL_OFF);
>> +}
>> +
>> +static void jh7110_pcie_mode_set(struct jh7110_pcie_phy *phy)
>> +{
>> + /* PCIe Multi-PHY PLL KVCO Gain fine tune settings: */
>> + writel(PHY_KVCO_FINE_TUNE_LEVEL, phy->regs + PCIE_KVCO_LEVEL_OFF);
>> + writel(PHY_KVCO_FINE_TUNE_SIGNALS, phy->regs + PCIE_KVCO_TUNE_SIGNAL_OFF);
>> +}
>> +
>> +static int jh7110_pcie_phy_set_mode(struct phy *_phy,
>> + enum phy_mode mode, int submode)
>> +{
>> + struct jh7110_pcie_phy *phy = phy_get_drvdata(_phy);
>> +
>> + if (mode != phy->mode) {
>> + switch (mode) {
>> + case PHY_MODE_USB_HOST:
>> + case PHY_MODE_USB_DEVICE:
>> + case PHY_MODE_USB_OTG:
>> + jh7110_usb3_mode_set(phy);
>> + break;
>> + case PHY_MODE_PCIE:
>> + jh7110_pcie_mode_set(phy);
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + dev_info(&_phy->dev, "Changing phy mode to %d\n", mode);
>> + phy->mode = mode;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int jh7110_pcie_phy_init(struct phy *_phy)
>> +{
>> + return 0;
>> +}
>> +
>> +static int jh7110_pcie_phy_exit(struct phy *_phy)
>> +{
>> + return 0;
>> +}
>> +
>> +static const struct phy_ops jh7110_pcie_phy_ops = {
>> + .init = jh7110_pcie_phy_init,
>> + .exit = jh7110_pcie_phy_exit,
>> + .set_mode = jh7110_pcie_phy_set_mode,
>> + .owner = THIS_MODULE,
>> +};
>> +
>> +static int jh7110_pcie_phy_probe(struct platform_device *pdev)
>> +{
>> + struct jh7110_pcie_phy *phy;
>> + struct device *dev = &pdev->dev;
>> + struct phy_provider *phy_provider;
>> +
>> + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
>> + if (!phy)
>> + return -ENOMEM;
>> +
>> + phy->regs = devm_platform_ioremap_resource(pdev, 0);
>> + if (IS_ERR(phy->regs))
>> + return PTR_ERR(phy->regs);
>> +
>> + phy->phy = devm_phy_create(dev, NULL, &jh7110_pcie_phy_ops);
>> + if (IS_ERR(phy->phy))
>> + return dev_err_probe(dev, PTR_ERR(phy->regs),
>> + "Failed to map phy base\n");
>> +
>> + platform_set_drvdata(pdev, phy);
>> + phy_set_drvdata(phy->phy, phy);
>> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
>> +
>> + return PTR_ERR_OR_ZERO(phy_provider);
>> +}
>> +
>> +static int jh7110_pcie_phy_remove(struct platform_device *pdev)
>> +{
>> + platform_set_drvdata(pdev, NULL);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct of_device_id jh7110_pcie_phy_of_match[] = {
>> + { .compatible = "starfive,jh7110-pcie-phy" },
>> + { /* sentinel */ },
>> +};
>> +MODULE_DEVICE_TABLE(of, jh7110_pcie_phy_of_match);
>> +
>> +static struct platform_driver jh7110_pcie_phy_driver = {
>> + .probe = jh7110_pcie_phy_probe,
>> + .remove = jh7110_pcie_phy_remove,
>> + .driver = {
>> + .of_match_table = jh7110_pcie_phy_of_match,
>> + .name = "jh7110-pcie-phy",
>> + }
>> +};
>> +module_platform_driver(jh7110_pcie_phy_driver);
>> +
>> +MODULE_DESCRIPTION("StarFive JH7110 PCIe 2.0 PHY driver");
>> +MODULE_AUTHOR("Minda Chen <minda.chen@starfivetech.com>");
>> +MODULE_LICENSE("GPL");
>> diff --git a/drivers/phy/starfive/phy-jh7110-usb.c b/drivers/phy/starfive/phy-jh7110-usb.c
>> new file mode 100644
>> index 000000000000..89db0b7b1224
>> --- /dev/null
>> +++ b/drivers/phy/starfive/phy-jh7110-usb.c
>> @@ -0,0 +1,167 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * StarFive JH7110 USB 2.0 PHY driver
>
> Since these two seem to be different driver, pls split the patches to
> two, one for each phy driver
>
ok
>> + *
>> + * Copyright (C) 2023 Minda Chen <minda.chen@starfivetech.com>
>> + */
>> +
>> +#include <linux/bits.h>
>> +#include <linux/clk.h>
>> +#include <linux/err.h>
>> +#include <linux/io.h>
>> +#include <linux/module.h>
>> +#include <linux/phy/phy.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/usb/of.h>
>> +
>> +#define USB_125M_CLK_RATE 125000000
>> +#define USB_LS_KEEPALIVE_OFF 0x4
>> +#define USB_LS_KEEPALIVE_ENABLE BIT(4)
>> +
>> +struct jh7110_usb2_phy {
>> + struct phy *phy;
>> + void __iomem *regs;
>> + struct clk *usb_125m_clk;
>> + struct clk *app_125;
>> + enum usb_dr_mode dr_mode;
>> +};
>> +
>> +static void jh7110_usb2_mode_set(struct jh7110_usb2_phy *phy)
>> +{
>> + unsigned int val;
>> +
>> + if (phy->dr_mode != USB_DR_MODE_PERIPHERAL) {
>> + /* Enable the LS speed keep-alive signal */
>> + val = readl(phy->regs + USB_LS_KEEPALIVE_OFF);
>> + val |= USB_LS_KEEPALIVE_ENABLE;
>> + writel(val, phy->regs + USB_LS_KEEPALIVE_OFF);
>> + }
>> +}
>> +
>> +static int jh7110_usb2_phy_set_mode(struct phy *_phy,
>> + enum phy_mode mode, int submode)
>> +{
>> + struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy);
>> + int new_mode;
>> +
>> + switch (mode) {
>> + case PHY_MODE_USB_HOST:
>> + new_mode = USB_DR_MODE_HOST;
>> + break;
>> + case PHY_MODE_USB_DEVICE:
>> + new_mode = USB_DR_MODE_PERIPHERAL;
>> + break;
>> + case PHY_MODE_USB_OTG:
>> + new_mode = USB_DR_MODE_OTG;
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + if (new_mode != phy->dr_mode) {
>> + dev_info(&_phy->dev, "Changing dr_mode to %d\n", new_mode);
>> + phy->dr_mode = new_mode;
>> + jh7110_usb2_mode_set(phy);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int jh7110_usb2_phy_init(struct phy *_phy)
>> +{
>> + struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy);
>> + int ret;
>> +
>> + ret = clk_set_rate(phy->usb_125m_clk, USB_125M_CLK_RATE);
>> + if (ret)
>> + return ret;
>> +
>> + ret = clk_prepare_enable(phy->app_125);
>> + if (ret)
>> + return ret;
>> +
>> + return 0;
>> +}
>> +
>> +static int jh7110_usb2_phy_exit(struct phy *_phy)
>> +{
>> + struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy);
>> +
>> + clk_disable_unprepare(phy->app_125);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct phy_ops jh7110_usb2_phy_ops = {
>> + .init = jh7110_usb2_phy_init,
>> + .exit = jh7110_usb2_phy_exit,
>> + .set_mode = jh7110_usb2_phy_set_mode,
>> + .owner = THIS_MODULE,
>> +};
>> +
>> +static int jh7110_usb_phy_probe(struct platform_device *pdev)
>> +{
>> + struct jh7110_usb2_phy *phy;
>> + struct device *dev = &pdev->dev;
>> + struct phy_provider *phy_provider;
>> +
>> + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
>> + if (!phy)
>> + return -ENOMEM;
>> +
>> + phy->usb_125m_clk = devm_clk_get(dev, "125m");
>> + if (IS_ERR(phy->usb_125m_clk))
>> + return dev_err_probe(dev, PTR_ERR(phy->usb_125m_clk),
>> + "Failed to get 125m clock\n");
>> +
>> + phy->app_125 = devm_clk_get(dev, "app_125");
>> + if (IS_ERR(phy->app_125))
>> + return dev_err_probe(dev, PTR_ERR(phy->app_125),
>> + "Failed to get app 125m clock\n");
>> +
>> + phy->regs = devm_platform_ioremap_resource(pdev, 0);
>> + if (IS_ERR(phy->regs))
>> + return dev_err_probe(dev, PTR_ERR(phy->regs),
>> + "Failed to map phy base\n");
>> +
>> + phy->phy = devm_phy_create(dev, NULL, &jh7110_usb2_phy_ops);
>> + if (IS_ERR(phy->phy))
>> + return dev_err_probe(dev, PTR_ERR(phy->phy),
>> + "Failed to create phy\n");
>> +
>> + platform_set_drvdata(pdev, phy);
>> + phy_set_drvdata(phy->phy, phy);
>> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
>> +
>> + return PTR_ERR_OR_ZERO(phy_provider);
>> +}
>> +
>> +static int jh7110_usb_phy_remove(struct platform_device *pdev)
>> +{
>> + struct jh7110_usb2_phy *phy = platform_get_drvdata(pdev);
>> +
>> + clk_disable_unprepare(phy->app_125);
>> + platform_set_drvdata(pdev, NULL);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct of_device_id jh7110_usb_phy_of_match[] = {
>> + { .compatible = "starfive,jh7110-usb-phy" },
>> + { /* sentinel */ },
>> +};
>> +MODULE_DEVICE_TABLE(of, jh7110_usb_phy_of_match);
>> +
>> +static struct platform_driver jh7110_usb_phy_driver = {
>> + .probe = jh7110_usb_phy_probe,
>> + .remove = jh7110_usb_phy_remove,
>> + .driver = {
>> + .of_match_table = jh7110_usb_phy_of_match,
>> + .name = "jh7110-usb-phy",
>> + }
>> +};
>> +module_platform_driver(jh7110_usb_phy_driver);
>> +
>> +MODULE_DESCRIPTION("StarFive JH7110 USB 2.0 PHY driver");
>> +MODULE_AUTHOR("Minda Chen <minda.chen@starfivetech.com>");
>> +MODULE_LICENSE("GPL");
>> --
>> 2.17.1
>
@@ -19977,6 +19977,14 @@ S: Supported
F: Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-rx.yaml
F: drivers/phy/starfive/phy-starfive-dphy-rx.c
+STARFIVE JH71X0 PCIE AND USB PHY DRIVER
+M: Emil Renner Berthing <kernel@esmil.dk>
+M: Minda Chen <minda.chen@starfivetech.com>
+S: Supported
+F: Documentation/devicetree/bindings/phy/starfive,jh7110-usb-pcie-phy.yaml
+F: drivers/phy/starfive/phy-jh7110-pcie.c
+F: drivers/phy/starfive/phy-jh7110-usb.c
+
STATIC BRANCH/CALL
M: Peter Zijlstra <peterz@infradead.org>
M: Josh Poimboeuf <jpoimboe@kernel.org>
@@ -11,3 +11,25 @@ config PHY_STARFIVE_DPHY_RX
Choose this option if you have a Starfive D-PHY in your
system. If M is selected, the module will be called
phy-starfive-dphy-rx.
+
+config PHY_STARFIVE_JH7110_USB
+ tristate "Starfive JH7110 USB 2.0 PHY support"
+ depends on USB_SUPPORT
+ select GENERIC_PHY
+ select USB_PHY
+ help
+ Enable this to support the StarFive USB 2.0 PHY,
+ used with the Cadence USB controller.
+ If M is selected, the module will be called
+ phy-jh7110-usb.ko.
+
+config PHY_STARFIVE_JH7110_PCIE
+ tristate "Starfive JH7110 PCIE 2.0/USB 3.0 PHY support"
+ depends on USB_SUPPORT
+ select GENERIC_PHY
+ select USB_PHY
+ help
+ Enable this to support the StarFive PCIe 2.0 PHY,
+ or used as USB 3.0 PHY.
+ If M is selected, the module will be called
+ phy-jh7110-pcie.ko.
@@ -1,2 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_PHY_STARFIVE_DPHY_RX) += phy-starfive-dphy-rx.o
+obj-$(CONFIG_PHY_STARFIVE_JH7110_USB) += phy-jh7110-usb.o
+obj-$(CONFIG_PHY_STARFIVE_JH7110_PCIE) += phy-jh7110-pcie.o
new file mode 100644
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * StarFive JH7110 PCIe 2.0 PHY driver
+ *
+ * Copyright (C) 2023 Minda Chen <minda.chen@starfivetech.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#define PCIE_KVCO_LEVEL_OFF (0x28)
+#define PCIE_USB3_PHY_PLL_CTL_OFF (0x7c)
+#define PCIE_KVCO_TUNE_SIGNAL_OFF (0x80)
+#define PCIE_USB3_PHY_ENABLE BIT(4)
+#define PHY_KVCO_FINE_TUNE_LEVEL 0x91
+#define PHY_KVCO_FINE_TUNE_SIGNALS 0xc
+
+struct jh7110_pcie_phy {
+ struct phy *phy;
+ void __iomem *regs;
+ enum phy_mode mode;
+};
+
+static void jh7110_usb3_mode_set(struct jh7110_pcie_phy *phy)
+{
+ /* Configuare spread-spectrum mode: down-spread-spectrum */
+ writel(PCIE_USB3_PHY_ENABLE, phy->regs + PCIE_USB3_PHY_PLL_CTL_OFF);
+}
+
+static void jh7110_pcie_mode_set(struct jh7110_pcie_phy *phy)
+{
+ /* PCIe Multi-PHY PLL KVCO Gain fine tune settings: */
+ writel(PHY_KVCO_FINE_TUNE_LEVEL, phy->regs + PCIE_KVCO_LEVEL_OFF);
+ writel(PHY_KVCO_FINE_TUNE_SIGNALS, phy->regs + PCIE_KVCO_TUNE_SIGNAL_OFF);
+}
+
+static int jh7110_pcie_phy_set_mode(struct phy *_phy,
+ enum phy_mode mode, int submode)
+{
+ struct jh7110_pcie_phy *phy = phy_get_drvdata(_phy);
+
+ if (mode != phy->mode) {
+ switch (mode) {
+ case PHY_MODE_USB_HOST:
+ case PHY_MODE_USB_DEVICE:
+ case PHY_MODE_USB_OTG:
+ jh7110_usb3_mode_set(phy);
+ break;
+ case PHY_MODE_PCIE:
+ jh7110_pcie_mode_set(phy);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ dev_info(&_phy->dev, "Changing phy mode to %d\n", mode);
+ phy->mode = mode;
+ }
+
+ return 0;
+}
+
+static int jh7110_pcie_phy_init(struct phy *_phy)
+{
+ return 0;
+}
+
+static int jh7110_pcie_phy_exit(struct phy *_phy)
+{
+ return 0;
+}
+
+static const struct phy_ops jh7110_pcie_phy_ops = {
+ .init = jh7110_pcie_phy_init,
+ .exit = jh7110_pcie_phy_exit,
+ .set_mode = jh7110_pcie_phy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static int jh7110_pcie_phy_probe(struct platform_device *pdev)
+{
+ struct jh7110_pcie_phy *phy;
+ struct device *dev = &pdev->dev;
+ struct phy_provider *phy_provider;
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return -ENOMEM;
+
+ phy->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(phy->regs))
+ return PTR_ERR(phy->regs);
+
+ phy->phy = devm_phy_create(dev, NULL, &jh7110_pcie_phy_ops);
+ if (IS_ERR(phy->phy))
+ return dev_err_probe(dev, PTR_ERR(phy->regs),
+ "Failed to map phy base\n");
+
+ platform_set_drvdata(pdev, phy);
+ phy_set_drvdata(phy->phy, phy);
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static int jh7110_pcie_phy_remove(struct platform_device *pdev)
+{
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static const struct of_device_id jh7110_pcie_phy_of_match[] = {
+ { .compatible = "starfive,jh7110-pcie-phy" },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, jh7110_pcie_phy_of_match);
+
+static struct platform_driver jh7110_pcie_phy_driver = {
+ .probe = jh7110_pcie_phy_probe,
+ .remove = jh7110_pcie_phy_remove,
+ .driver = {
+ .of_match_table = jh7110_pcie_phy_of_match,
+ .name = "jh7110-pcie-phy",
+ }
+};
+module_platform_driver(jh7110_pcie_phy_driver);
+
+MODULE_DESCRIPTION("StarFive JH7110 PCIe 2.0 PHY driver");
+MODULE_AUTHOR("Minda Chen <minda.chen@starfivetech.com>");
+MODULE_LICENSE("GPL");
new file mode 100644
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * StarFive JH7110 USB 2.0 PHY driver
+ *
+ * Copyright (C) 2023 Minda Chen <minda.chen@starfivetech.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/usb/of.h>
+
+#define USB_125M_CLK_RATE 125000000
+#define USB_LS_KEEPALIVE_OFF 0x4
+#define USB_LS_KEEPALIVE_ENABLE BIT(4)
+
+struct jh7110_usb2_phy {
+ struct phy *phy;
+ void __iomem *regs;
+ struct clk *usb_125m_clk;
+ struct clk *app_125;
+ enum usb_dr_mode dr_mode;
+};
+
+static void jh7110_usb2_mode_set(struct jh7110_usb2_phy *phy)
+{
+ unsigned int val;
+
+ if (phy->dr_mode != USB_DR_MODE_PERIPHERAL) {
+ /* Enable the LS speed keep-alive signal */
+ val = readl(phy->regs + USB_LS_KEEPALIVE_OFF);
+ val |= USB_LS_KEEPALIVE_ENABLE;
+ writel(val, phy->regs + USB_LS_KEEPALIVE_OFF);
+ }
+}
+
+static int jh7110_usb2_phy_set_mode(struct phy *_phy,
+ enum phy_mode mode, int submode)
+{
+ struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy);
+ int new_mode;
+
+ switch (mode) {
+ case PHY_MODE_USB_HOST:
+ new_mode = USB_DR_MODE_HOST;
+ break;
+ case PHY_MODE_USB_DEVICE:
+ new_mode = USB_DR_MODE_PERIPHERAL;
+ break;
+ case PHY_MODE_USB_OTG:
+ new_mode = USB_DR_MODE_OTG;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (new_mode != phy->dr_mode) {
+ dev_info(&_phy->dev, "Changing dr_mode to %d\n", new_mode);
+ phy->dr_mode = new_mode;
+ jh7110_usb2_mode_set(phy);
+ }
+
+ return 0;
+}
+
+static int jh7110_usb2_phy_init(struct phy *_phy)
+{
+ struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy);
+ int ret;
+
+ ret = clk_set_rate(phy->usb_125m_clk, USB_125M_CLK_RATE);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(phy->app_125);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int jh7110_usb2_phy_exit(struct phy *_phy)
+{
+ struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy);
+
+ clk_disable_unprepare(phy->app_125);
+
+ return 0;
+}
+
+static const struct phy_ops jh7110_usb2_phy_ops = {
+ .init = jh7110_usb2_phy_init,
+ .exit = jh7110_usb2_phy_exit,
+ .set_mode = jh7110_usb2_phy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static int jh7110_usb_phy_probe(struct platform_device *pdev)
+{
+ struct jh7110_usb2_phy *phy;
+ struct device *dev = &pdev->dev;
+ struct phy_provider *phy_provider;
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return -ENOMEM;
+
+ phy->usb_125m_clk = devm_clk_get(dev, "125m");
+ if (IS_ERR(phy->usb_125m_clk))
+ return dev_err_probe(dev, PTR_ERR(phy->usb_125m_clk),
+ "Failed to get 125m clock\n");
+
+ phy->app_125 = devm_clk_get(dev, "app_125");
+ if (IS_ERR(phy->app_125))
+ return dev_err_probe(dev, PTR_ERR(phy->app_125),
+ "Failed to get app 125m clock\n");
+
+ phy->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(phy->regs))
+ return dev_err_probe(dev, PTR_ERR(phy->regs),
+ "Failed to map phy base\n");
+
+ phy->phy = devm_phy_create(dev, NULL, &jh7110_usb2_phy_ops);
+ if (IS_ERR(phy->phy))
+ return dev_err_probe(dev, PTR_ERR(phy->phy),
+ "Failed to create phy\n");
+
+ platform_set_drvdata(pdev, phy);
+ phy_set_drvdata(phy->phy, phy);
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static int jh7110_usb_phy_remove(struct platform_device *pdev)
+{
+ struct jh7110_usb2_phy *phy = platform_get_drvdata(pdev);
+
+ clk_disable_unprepare(phy->app_125);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static const struct of_device_id jh7110_usb_phy_of_match[] = {
+ { .compatible = "starfive,jh7110-usb-phy" },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, jh7110_usb_phy_of_match);
+
+static struct platform_driver jh7110_usb_phy_driver = {
+ .probe = jh7110_usb_phy_probe,
+ .remove = jh7110_usb_phy_remove,
+ .driver = {
+ .of_match_table = jh7110_usb_phy_of_match,
+ .name = "jh7110-usb-phy",
+ }
+};
+module_platform_driver(jh7110_usb_phy_driver);
+
+MODULE_DESCRIPTION("StarFive JH7110 USB 2.0 PHY driver");
+MODULE_AUTHOR("Minda Chen <minda.chen@starfivetech.com>");
+MODULE_LICENSE("GPL");