[1/2] rtc: pcf8523: fix coding-style issues
Commit Message
Minor modifications for coding-style correctness (tabs, spaces and blank
lines before and after brackets). In total 7 errors, 3 warnings and 1
check where removed from the checkpatch output without damaging code
readability.
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
---
drivers/rtc/rtc-pcf8523.c | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
@@ -21,7 +21,7 @@
#define PCF8523_CONTROL2_AF BIT(3)
#define PCF8523_REG_CONTROL3 0x02
-#define PCF8523_CONTROL3_PM GENMASK(7,5)
+#define PCF8523_CONTROL3_PM GENMASK(7, 5)
#define PCF8523_PM_STANDBY 0x7
#define PCF8523_CONTROL3_BLF BIT(2) /* battery low bit, read-only */
#define PCF8523_CONTROL3_BSF BIT(3)
@@ -234,8 +234,7 @@ static int pcf8523_param_get(struct device *dev, struct rtc_param *param)
int ret;
u32 value;
- switch(param->param) {
-
+ switch (param->param) {
case RTC_PARAM_BACKUP_SWITCH_MODE:
ret = regmap_read(pcf8523->regmap, PCF8523_REG_CONTROL3, &value);
if (ret < 0)
@@ -243,7 +242,7 @@ static int pcf8523_param_get(struct device *dev, struct rtc_param *param)
value = FIELD_GET(PCF8523_CONTROL3_PM, value);
- switch(value) {
+ switch (value) {
case 0x0:
case 0x4:
param->uvalue = RTC_BSM_LEVEL;
@@ -273,7 +272,7 @@ static int pcf8523_param_set(struct device *dev, struct rtc_param *param)
struct pcf8523 *pcf8523 = dev_get_drvdata(dev);
u8 mode;
- switch(param->param) {
+ switch (param->param) {
case RTC_PARAM_BACKUP_SWITCH_MODE:
switch (param->uvalue) {
case RTC_BSM_DISABLED:
@@ -385,9 +384,9 @@ static const struct rtc_class_ops pcf8523_rtc_ops = {
};
static const struct regmap_config regmap_config = {
- .reg_bits = 8,
- .val_bits = 8,
- .max_register = 0x13,
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 0x13,
};
static int pcf8523_probe(struct i2c_client *client)