On Tue, 14 Mar 2023, Niklas Schnelle wrote:
> those drivers requiring them. For the DEFXX driver there use of I/O
> ports is optional and we only need to fence those paths.can It also
Some writing mess-up here, should it read:
"For the DEFXX driver the use of I/O ports is optional and we only need to
fence those paths. It also [...]"
?
> diff --git a/drivers/net/fddi/Kconfig b/drivers/net/fddi/Kconfig
> index 846bf41c2717..fa3f1e0fe143 100644
> --- a/drivers/net/fddi/Kconfig
> +++ b/drivers/net/fddi/Kconfig
> @@ -29,7 +29,7 @@ config DEFZA
>
> config DEFXX
> tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
> - depends on FDDI && (PCI || EISA || TC)
> + depends on FDDI && (PCI || EISA || TC) && HAS_IOPORT
This part would incorrectly disable the driver for !HAS_IOPORT and is not
needed given the change below:
> diff --git a/drivers/net/fddi/defxx.c b/drivers/net/fddi/defxx.c
> index 1fef8a9b1a0f..5f386eba9618 100644
> --- a/drivers/net/fddi/defxx.c
> +++ b/drivers/net/fddi/defxx.c
> @@ -254,7 +254,7 @@ static const char version[] =
> #define DFX_BUS_TC(dev) 0
> #endif
>
> -#if defined(CONFIG_EISA) || defined(CONFIG_PCI)
> +#ifdef HAS_IOPORT
> #define dfx_use_mmio bp->mmio
> #else
> #define dfx_use_mmio true
is it?
Maciej
@@ -474,7 +474,7 @@ source "drivers/net/ipa/Kconfig"
config NET_SB1000
tristate "General Instruments Surfboard 1000"
- depends on PNP
+ depends on ISA && PNP
help
This is a driver for the General Instrument (also known as
NextLevel) SURFboard 1000 internal
@@ -4,7 +4,7 @@
#
menuconfig ARCNET
- depends on NETDEVICES && (ISA || PCI || PCMCIA)
+ depends on NETDEVICES && (ISA || PCI || PCMCIA) && HAS_IOPORT
tristate "ARCnet support"
help
If you have a network card of this type, say Y and check out the
@@ -7,6 +7,7 @@ if CAN_CC770
config CAN_CC770_ISA
tristate "ISA Bus based legacy CC770 driver"
+ depends on ISA
help
This driver adds legacy support for CC770 and AN82527 chips
connected to the ISA bus using I/O port, memory mapped or
@@ -87,6 +87,7 @@ config CAN_PLX_PCI
config CAN_SJA1000_ISA
tristate "ISA Bus based legacy SJA1000 driver"
+ depends on ISA
help
This driver adds legacy support for SJA1000 chips connected to
the ISA bus using I/O port, memory mapped or indirect access.
@@ -44,7 +44,7 @@ config 3C515
config PCMCIA_3C574
tristate "3Com 3c574 PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
help
Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
(PC-card) Fast Ethernet card to your computer.
@@ -54,7 +54,7 @@ config PCMCIA_3C574
config PCMCIA_3C589
tristate "3Com 3c589 PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
help
Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
(PC-card) Ethernet card to your computer.
@@ -19,7 +19,7 @@ if NET_VENDOR_8390
config PCMCIA_AXNET
tristate "Asix AX88190 PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
help
Say Y here if you intend to attach an Asix AX88190-based PCMCIA
(PC-card) Fast Ethernet card to your computer. These cards are
@@ -117,7 +117,7 @@ config NE2000
config NE2K_PCI
tristate "PCI NE2000 and clones support (see help)"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select CRC32
help
This driver is for NE2000 compatible PCI cards. It will not work
@@ -146,7 +146,7 @@ config APNE
config PCMCIA_PCNET
tristate "NE2000 compatible PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
select CRC32
help
Say Y here if you intend to attach an NE2000 compatible PCMCIA
@@ -56,7 +56,7 @@ config LANCE
config PCNET32
tristate "AMD PCnet32 PCI support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select CRC32
select MII
help
@@ -122,7 +122,7 @@ config MVME147_NET
config PCMCIA_NMCLAN
tristate "New Media PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
help
Say Y here if you intend to attach a New Media Ethernet or LiveWire
PCMCIA (PC-card) Ethernet card to your computer.
@@ -18,7 +18,7 @@ if NET_VENDOR_FUJITSU
config PCMCIA_FMVJ18X
tristate "Fujitsu FMV-J18x PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
select CRC32
help
Say Y here if you intend to attach a Fujitsu FMV-J18x or compatible
@@ -41,7 +41,7 @@ config E100
config E1000
tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
This driver supports Intel(R) PRO/1000 gigabit ethernet family of
adapters. For more information on how to identify your adapter, go
@@ -19,7 +19,7 @@ if NET_VENDOR_SIS
config SIS900
tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select CRC32
select MII
help
@@ -35,7 +35,7 @@ config SIS900
config SIS190
tristate "SiS190/SiS191 gigabit ethernet support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select CRC32
select MII
help
@@ -54,7 +54,7 @@ config SMC91X
config PCMCIA_SMC91C92
tristate "SMC 91Cxx PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
select CRC32
select MII
help
@@ -161,7 +161,7 @@ config TI_KEYSTONE_NETCP_ETHSS
config TLAN
tristate "TI ThunderLAN support"
- depends on (PCI || EISA)
+ depends on (PCI || EISA) && HAS_IOPORT
help
If you have a PCI Ethernet network card based on the ThunderLAN chip
which is supported by this driver, say Y here.
@@ -20,6 +20,7 @@ config VIA_RHINE
tristate "VIA Rhine support"
depends on PCI || (OF_IRQ && GENERIC_PCI_IOMAP)
depends on PCI || ARCH_VT8500 || COMPILE_TEST
+ depends on HAS_IOPORT
depends on HAS_DMA
select CRC32
select MII
@@ -19,7 +19,7 @@ if NET_VENDOR_XIRCOM
config PCMCIA_XIRC2PS
tristate "Xircom 16-bit PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
help
Say Y here if you intend to attach a Xircom 16-bit PCMCIA (PC-card)
Ethernet or Fast Ethernet card to your computer.
@@ -29,7 +29,7 @@ config DEFZA
config DEFXX
tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
- depends on FDDI && (PCI || EISA || TC)
+ depends on FDDI && (PCI || EISA || TC) && HAS_IOPORT
help
This is support for the DIGITAL series of TURBOchannel (DEFTA),
EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
@@ -254,7 +254,7 @@ static const char version[] =
#define DFX_BUS_TC(dev) 0
#endif
-#if defined(CONFIG_EISA) || defined(CONFIG_PCI)
+#ifdef HAS_IOPORT
#define dfx_use_mmio bp->mmio
#else
#define dfx_use_mmio true
@@ -83,7 +83,7 @@ config SCC_TRXECHO
config BAYCOM_SER_FDX
tristate "BAYCOM ser12 fullduplex driver for AX.25"
- depends on AX25 && !S390
+ depends on AX25 && HAS_IOPORT
select CRC_CCITT
help
This is one of two drivers for Baycom style simple amateur radio
@@ -103,7 +103,7 @@ config BAYCOM_SER_FDX
config BAYCOM_SER_HDX
tristate "BAYCOM ser12 halfduplex driver for AX.25"
- depends on AX25 && !S390
+ depends on AX25 && HAS_IOPORT
select CRC_CCITT
help
This is one of two drivers for Baycom style simple amateur radio
@@ -151,7 +151,7 @@ config BAYCOM_EPP
config YAM
tristate "YAM driver for AX.25"
- depends on AX25 && !S390
+ depends on AX25 && HAS_IOPORT
help
The YAM is a modem for packet radio which connects to the serial
port and includes some of the functions of a Terminal Node
@@ -178,7 +178,7 @@ config C101
config FARSYNC
tristate "FarSync T-Series support"
- depends on HDLC && PCI
+ depends on HDLC && PCI && HAS_IOPORT
help
Support for the FarSync T-Series X.21 (and V.35/V.24) cards by
FarSite Communications Ltd.
@@ -4,7 +4,7 @@
#
menuconfig HAMRADIO
- depends on NET && !S390
+ depends on NET
bool "Amateur Radio support"
help
If you want to connect your Linux box to an amateur radio, answer Y