diff mbox series

[v8,03/14] arm64: dts: qcom: sdm845: Fix the base addresses of LLCC banks

Message ID 20230314080443.64635-4-manivannan.sadhasivam@linaro.org
State New
Headers
Series Qcom: LLCC/EDAC: Fix base address used for LLCC banks |

Commit Message

Manivannan Sadhasivam March 14, 2023, 8:04 a.m. UTC 
  The LLCC block has several banks each with a different base address
and holes in between. So it is not a correct approach to cover these
banks with a single offset/size. Instead, the individual bank's base
address needs to be specified in devicetree with the exact size.

On SDM845, the size of the LLCC bank 0 needs to be reduced to 0x4500 as
there are LLCC BWMON registers located after this range.

Reported-by: Parikshit Pareek <quic_ppareek@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 479859bd8ab3..3bf95a12ebb9 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2192,8 +2192,11 @@  uart15: serial@a9c000 {
 
 		llcc: system-cache-controller@1100000 {
 			compatible = "qcom,sdm845-llcc";
-			reg = <0 0x01100000 0 0x31000>, <0 0x01300000 0 0x50000>;
-			reg-names = "llcc_base", "llcc_broadcast_base";
+			reg = <0 0x01100000 0 0x45000>, <0 0x01180000 0 0x50000>,
+			      <0 0x01200000 0 0x50000>, <0 0x01280000 0 0x50000>,
+			      <0 0x01300000 0 0x50000>;
+			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+				    "llcc3_base", "llcc_broadcast_base";
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};