[v3,7/7] PCI: endpoint: Add PCI Endpoint function driver for MHI bus

Message ID 20230314044623.10254-8-manivannan.sadhasivam@linaro.org
State New
Headers
Series Add support for MHI Endpoint function driver |

Commit Message

Manivannan Sadhasivam March 14, 2023, 4:46 a.m. UTC
  Add PCI Endpoint driver for the Qualcomm MHI (Modem Host Interface) bus.
The driver implements the MHI function over PCI in the endpoint device
such as SDX55 modem. The MHI endpoint function driver acts as a
controller driver for the MHI Endpoint stack and carries out all PCI
related activities like mapping the host memory using iATU, triggering
MSIs etc...

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/pci/endpoint/functions/Kconfig       |  10 +
 drivers/pci/endpoint/functions/Makefile      |   1 +
 drivers/pci/endpoint/functions/pci-epf-mhi.c | 454 +++++++++++++++++++
 3 files changed, 465 insertions(+)
 create mode 100644 drivers/pci/endpoint/functions/pci-epf-mhi.c
  

Comments

Kishon Vijay Abraham I May 15, 2023, 8:07 a.m. UTC | #1
Hi Manivannan,

On 3/14/2023 10:16 AM, Manivannan Sadhasivam wrote:
> Add PCI Endpoint driver for the Qualcomm MHI (Modem Host Interface) bus.
> The driver implements the MHI function over PCI in the endpoint device
> such as SDX55 modem. The MHI endpoint function driver acts as a
> controller driver for the MHI Endpoint stack and carries out all PCI
> related activities like mapping the host memory using iATU, triggering
> MSIs etc...
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>   drivers/pci/endpoint/functions/Kconfig       |  10 +
>   drivers/pci/endpoint/functions/Makefile      |   1 +
>   drivers/pci/endpoint/functions/pci-epf-mhi.c | 454 +++++++++++++++++++
>   3 files changed, 465 insertions(+)
>   create mode 100644 drivers/pci/endpoint/functions/pci-epf-mhi.c
> 
> diff --git a/drivers/pci/endpoint/functions/Kconfig b/drivers/pci/endpoint/functions/Kconfig
> index 9fd560886871..f5171b4fabbe 100644
> --- a/drivers/pci/endpoint/functions/Kconfig
> +++ b/drivers/pci/endpoint/functions/Kconfig
> @@ -37,3 +37,13 @@ config PCI_EPF_VNTB
>   	  between PCI Root Port and PCIe Endpoint.
>   
>   	  If in doubt, say "N" to disable Endpoint NTB driver.
> +
> +config PCI_EPF_MHI
> +	tristate "PCI Endpoint driver for MHI bus"
> +	depends on PCI_ENDPOINT && MHI_BUS_EP
> +	help
> +	   Enable this configuration option to enable the PCI Endpoint
> +	   driver for Modem Host Interface (MHI) bus in Qualcomm Endpoint
> +	   devices such as SDX55.
> +
> +	   If in doubt, say "N" to disable Endpoint driver for MHI bus.
> diff --git a/drivers/pci/endpoint/functions/Makefile b/drivers/pci/endpoint/functions/Makefile
> index 5c13001deaba..696473fce50e 100644
> --- a/drivers/pci/endpoint/functions/Makefile
> +++ b/drivers/pci/endpoint/functions/Makefile
> @@ -6,3 +6,4 @@
>   obj-$(CONFIG_PCI_EPF_TEST)		+= pci-epf-test.o
>   obj-$(CONFIG_PCI_EPF_NTB)		+= pci-epf-ntb.o
>   obj-$(CONFIG_PCI_EPF_VNTB) 		+= pci-epf-vntb.o
> +obj-$(CONFIG_PCI_EPF_MHI)		+= pci-epf-mhi.o
> diff --git a/drivers/pci/endpoint/functions/pci-epf-mhi.c b/drivers/pci/endpoint/functions/pci-epf-mhi.c
> new file mode 100644
> index 000000000000..03e7f42663b3
> --- /dev/null
> +++ b/drivers/pci/endpoint/functions/pci-epf-mhi.c
.
.
<snip>
.
.
> +static int pci_epf_mhi_link_up(struct pci_epf *epf)
> +{
> +	struct pci_epf_mhi *epf_mhi = epf_get_drvdata(epf);
> +	const struct pci_epf_mhi_ep_info *info = epf_mhi->info;
> +	struct mhi_ep_cntrl *mhi_cntrl = &epf_mhi->mhi_cntrl;
> +	struct pci_epc *epc = epf->epc;
> +	struct device *dev = &epf->dev;
> +	int ret;
> +
> +	mhi_cntrl->mmio = epf_mhi->mmio;
> +	mhi_cntrl->irq = epf_mhi->irq;
> +	mhi_cntrl->mru = info->mru;
> +
> +	/* Assign the struct dev of PCI EP as MHI controller device */
> +	mhi_cntrl->cntrl_dev = epc->dev.parent;
> +	mhi_cntrl->raise_irq = pci_epf_mhi_raise_irq;
> +	mhi_cntrl->alloc_map = pci_epf_mhi_alloc_map;
> +	mhi_cntrl->unmap_free = pci_epf_mhi_unmap_free;
> +	mhi_cntrl->read_from_host = pci_epf_mhi_read_from_host;
> +	mhi_cntrl->write_to_host = pci_epf_mhi_write_to_host;
> +
> +	/* Register the MHI EP controller */
> +	ret = mhi_ep_register_controller(mhi_cntrl, info->config);
> +	if (ret) {
> +		dev_err(dev, "Failed to register MHI EP controller: %d\n", ret);
> +		return ret;
> +	}

Any reason for delaying registration with MHI bus till link up? Since 
after linkup, the host can start using the device, this should be doing 
minimal stuff IMHO. Or is there further handshake between the host side 
MHI driver and the endpoint side MHI driver?

Thanks,
Kishon
  
Manivannan Sadhasivam May 15, 2023, 11:36 a.m. UTC | #2
Hi Kishon,

On Mon, May 15, 2023 at 01:37:28PM +0530, Kishon VijayAbraham I wrote:
> Hi Manivannan,
> 
> On 3/14/2023 10:16 AM, Manivannan Sadhasivam wrote:
> > Add PCI Endpoint driver for the Qualcomm MHI (Modem Host Interface) bus.
> > The driver implements the MHI function over PCI in the endpoint device
> > such as SDX55 modem. The MHI endpoint function driver acts as a
> > controller driver for the MHI Endpoint stack and carries out all PCI
> > related activities like mapping the host memory using iATU, triggering
> > MSIs etc...
> > 
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> >   drivers/pci/endpoint/functions/Kconfig       |  10 +
> >   drivers/pci/endpoint/functions/Makefile      |   1 +
> >   drivers/pci/endpoint/functions/pci-epf-mhi.c | 454 +++++++++++++++++++
> >   3 files changed, 465 insertions(+)
> >   create mode 100644 drivers/pci/endpoint/functions/pci-epf-mhi.c
> > 
> > diff --git a/drivers/pci/endpoint/functions/Kconfig b/drivers/pci/endpoint/functions/Kconfig
> > index 9fd560886871..f5171b4fabbe 100644
> > --- a/drivers/pci/endpoint/functions/Kconfig
> > +++ b/drivers/pci/endpoint/functions/Kconfig
> > @@ -37,3 +37,13 @@ config PCI_EPF_VNTB
> >   	  between PCI Root Port and PCIe Endpoint.
> >   	  If in doubt, say "N" to disable Endpoint NTB driver.
> > +
> > +config PCI_EPF_MHI
> > +	tristate "PCI Endpoint driver for MHI bus"
> > +	depends on PCI_ENDPOINT && MHI_BUS_EP
> > +	help
> > +	   Enable this configuration option to enable the PCI Endpoint
> > +	   driver for Modem Host Interface (MHI) bus in Qualcomm Endpoint
> > +	   devices such as SDX55.
> > +
> > +	   If in doubt, say "N" to disable Endpoint driver for MHI bus.
> > diff --git a/drivers/pci/endpoint/functions/Makefile b/drivers/pci/endpoint/functions/Makefile
> > index 5c13001deaba..696473fce50e 100644
> > --- a/drivers/pci/endpoint/functions/Makefile
> > +++ b/drivers/pci/endpoint/functions/Makefile
> > @@ -6,3 +6,4 @@
> >   obj-$(CONFIG_PCI_EPF_TEST)		+= pci-epf-test.o
> >   obj-$(CONFIG_PCI_EPF_NTB)		+= pci-epf-ntb.o
> >   obj-$(CONFIG_PCI_EPF_VNTB) 		+= pci-epf-vntb.o
> > +obj-$(CONFIG_PCI_EPF_MHI)		+= pci-epf-mhi.o
> > diff --git a/drivers/pci/endpoint/functions/pci-epf-mhi.c b/drivers/pci/endpoint/functions/pci-epf-mhi.c
> > new file mode 100644
> > index 000000000000..03e7f42663b3
> > --- /dev/null
> > +++ b/drivers/pci/endpoint/functions/pci-epf-mhi.c
> .
> .
> <snip>
> .
> .
> > +static int pci_epf_mhi_link_up(struct pci_epf *epf)
> > +{
> > +	struct pci_epf_mhi *epf_mhi = epf_get_drvdata(epf);
> > +	const struct pci_epf_mhi_ep_info *info = epf_mhi->info;
> > +	struct mhi_ep_cntrl *mhi_cntrl = &epf_mhi->mhi_cntrl;
> > +	struct pci_epc *epc = epf->epc;
> > +	struct device *dev = &epf->dev;
> > +	int ret;
> > +
> > +	mhi_cntrl->mmio = epf_mhi->mmio;
> > +	mhi_cntrl->irq = epf_mhi->irq;
> > +	mhi_cntrl->mru = info->mru;
> > +
> > +	/* Assign the struct dev of PCI EP as MHI controller device */
> > +	mhi_cntrl->cntrl_dev = epc->dev.parent;
> > +	mhi_cntrl->raise_irq = pci_epf_mhi_raise_irq;
> > +	mhi_cntrl->alloc_map = pci_epf_mhi_alloc_map;
> > +	mhi_cntrl->unmap_free = pci_epf_mhi_unmap_free;
> > +	mhi_cntrl->read_from_host = pci_epf_mhi_read_from_host;
> > +	mhi_cntrl->write_to_host = pci_epf_mhi_write_to_host;
> > +
> > +	/* Register the MHI EP controller */
> > +	ret = mhi_ep_register_controller(mhi_cntrl, info->config);
> > +	if (ret) {
> > +		dev_err(dev, "Failed to register MHI EP controller: %d\n", ret);
> > +		return ret;
> > +	}
> 
> Any reason for delaying registration with MHI bus till link up? Since after
> linkup, the host can start using the device, this should be doing minimal
> stuff IMHO. Or is there further handshake between the host side MHI driver
> and the endpoint side MHI driver?
> 

Yes, there are further handshakes required between ep and host before the host
can start using MHI and this is done during mhi_ep_power_up(). Moreover,
registering the controller during link_up event allows us to do cleanup properly
when the link goes down.

- Mani
 
> Thanks,
> Kishon
  
Kishon Vijay Abraham I May 16, 2023, 3:38 a.m. UTC | #3
On 5/15/2023 5:06 PM, Manivannan Sadhasivam wrote:
> Hi Kishon,
> 
> On Mon, May 15, 2023 at 01:37:28PM +0530, Kishon VijayAbraham I wrote:
>> Hi Manivannan,
>>
>> On 3/14/2023 10:16 AM, Manivannan Sadhasivam wrote:
>>> Add PCI Endpoint driver for the Qualcomm MHI (Modem Host Interface) bus.
>>> The driver implements the MHI function over PCI in the endpoint device
>>> such as SDX55 modem. The MHI endpoint function driver acts as a
>>> controller driver for the MHI Endpoint stack and carries out all PCI
>>> related activities like mapping the host memory using iATU, triggering
>>> MSIs etc...
>>>
>>> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
>>> ---
>>>    drivers/pci/endpoint/functions/Kconfig       |  10 +
>>>    drivers/pci/endpoint/functions/Makefile      |   1 +
>>>    drivers/pci/endpoint/functions/pci-epf-mhi.c | 454 +++++++++++++++++++
>>>    3 files changed, 465 insertions(+)
>>>    create mode 100644 drivers/pci/endpoint/functions/pci-epf-mhi.c
>>>
>>> diff --git a/drivers/pci/endpoint/functions/Kconfig b/drivers/pci/endpoint/functions/Kconfig
>>> index 9fd560886871..f5171b4fabbe 100644
>>> --- a/drivers/pci/endpoint/functions/Kconfig
>>> +++ b/drivers/pci/endpoint/functions/Kconfig
>>> @@ -37,3 +37,13 @@ config PCI_EPF_VNTB
>>>    	  between PCI Root Port and PCIe Endpoint.
>>>    	  If in doubt, say "N" to disable Endpoint NTB driver.
>>> +
>>> +config PCI_EPF_MHI
>>> +	tristate "PCI Endpoint driver for MHI bus"
>>> +	depends on PCI_ENDPOINT && MHI_BUS_EP
>>> +	help
>>> +	   Enable this configuration option to enable the PCI Endpoint
>>> +	   driver for Modem Host Interface (MHI) bus in Qualcomm Endpoint
>>> +	   devices such as SDX55.
>>> +
>>> +	   If in doubt, say "N" to disable Endpoint driver for MHI bus.
>>> diff --git a/drivers/pci/endpoint/functions/Makefile b/drivers/pci/endpoint/functions/Makefile
>>> index 5c13001deaba..696473fce50e 100644
>>> --- a/drivers/pci/endpoint/functions/Makefile
>>> +++ b/drivers/pci/endpoint/functions/Makefile
>>> @@ -6,3 +6,4 @@
>>>    obj-$(CONFIG_PCI_EPF_TEST)		+= pci-epf-test.o
>>>    obj-$(CONFIG_PCI_EPF_NTB)		+= pci-epf-ntb.o
>>>    obj-$(CONFIG_PCI_EPF_VNTB) 		+= pci-epf-vntb.o
>>> +obj-$(CONFIG_PCI_EPF_MHI)		+= pci-epf-mhi.o
>>> diff --git a/drivers/pci/endpoint/functions/pci-epf-mhi.c b/drivers/pci/endpoint/functions/pci-epf-mhi.c
>>> new file mode 100644
>>> index 000000000000..03e7f42663b3
>>> --- /dev/null
>>> +++ b/drivers/pci/endpoint/functions/pci-epf-mhi.c
>> .
>> .
>> <snip>
>> .
>> .
>>> +static int pci_epf_mhi_link_up(struct pci_epf *epf)
>>> +{
>>> +	struct pci_epf_mhi *epf_mhi = epf_get_drvdata(epf);
>>> +	const struct pci_epf_mhi_ep_info *info = epf_mhi->info;
>>> +	struct mhi_ep_cntrl *mhi_cntrl = &epf_mhi->mhi_cntrl;
>>> +	struct pci_epc *epc = epf->epc;
>>> +	struct device *dev = &epf->dev;
>>> +	int ret;
>>> +
>>> +	mhi_cntrl->mmio = epf_mhi->mmio;
>>> +	mhi_cntrl->irq = epf_mhi->irq;
>>> +	mhi_cntrl->mru = info->mru;
>>> +
>>> +	/* Assign the struct dev of PCI EP as MHI controller device */
>>> +	mhi_cntrl->cntrl_dev = epc->dev.parent;
>>> +	mhi_cntrl->raise_irq = pci_epf_mhi_raise_irq;
>>> +	mhi_cntrl->alloc_map = pci_epf_mhi_alloc_map;
>>> +	mhi_cntrl->unmap_free = pci_epf_mhi_unmap_free;
>>> +	mhi_cntrl->read_from_host = pci_epf_mhi_read_from_host;
>>> +	mhi_cntrl->write_to_host = pci_epf_mhi_write_to_host;
>>> +
>>> +	/* Register the MHI EP controller */
>>> +	ret = mhi_ep_register_controller(mhi_cntrl, info->config);
>>> +	if (ret) {
>>> +		dev_err(dev, "Failed to register MHI EP controller: %d\n", ret);
>>> +		return ret;
>>> +	}
>>
>> Any reason for delaying registration with MHI bus till link up? Since after
>> linkup, the host can start using the device, this should be doing minimal
>> stuff IMHO. Or is there further handshake between the host side MHI driver
>> and the endpoint side MHI driver?
>>
> 
> Yes, there are further handshakes required between ep and host before the host
> can start using MHI and this is done during mhi_ep_power_up(). Moreover,
> registering the controller during link_up event allows us to do cleanup properly
> when the link goes down.

Thank you for clarifying!

For the entire series:

Reviewed-by: Kishon Vijay Abraham I <kishon@kernel.org>
> 
> - Mani
>   
>> Thanks,
>> Kishon
>
  

Patch

diff --git a/drivers/pci/endpoint/functions/Kconfig b/drivers/pci/endpoint/functions/Kconfig
index 9fd560886871..f5171b4fabbe 100644
--- a/drivers/pci/endpoint/functions/Kconfig
+++ b/drivers/pci/endpoint/functions/Kconfig
@@ -37,3 +37,13 @@  config PCI_EPF_VNTB
 	  between PCI Root Port and PCIe Endpoint.
 
 	  If in doubt, say "N" to disable Endpoint NTB driver.
+
+config PCI_EPF_MHI
+	tristate "PCI Endpoint driver for MHI bus"
+	depends on PCI_ENDPOINT && MHI_BUS_EP
+	help
+	   Enable this configuration option to enable the PCI Endpoint
+	   driver for Modem Host Interface (MHI) bus in Qualcomm Endpoint
+	   devices such as SDX55.
+
+	   If in doubt, say "N" to disable Endpoint driver for MHI bus.
diff --git a/drivers/pci/endpoint/functions/Makefile b/drivers/pci/endpoint/functions/Makefile
index 5c13001deaba..696473fce50e 100644
--- a/drivers/pci/endpoint/functions/Makefile
+++ b/drivers/pci/endpoint/functions/Makefile
@@ -6,3 +6,4 @@ 
 obj-$(CONFIG_PCI_EPF_TEST)		+= pci-epf-test.o
 obj-$(CONFIG_PCI_EPF_NTB)		+= pci-epf-ntb.o
 obj-$(CONFIG_PCI_EPF_VNTB) 		+= pci-epf-vntb.o
+obj-$(CONFIG_PCI_EPF_MHI)		+= pci-epf-mhi.o
diff --git a/drivers/pci/endpoint/functions/pci-epf-mhi.c b/drivers/pci/endpoint/functions/pci-epf-mhi.c
new file mode 100644
index 000000000000..03e7f42663b3
--- /dev/null
+++ b/drivers/pci/endpoint/functions/pci-epf-mhi.c
@@ -0,0 +1,454 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCI EPF driver for MHI Endpoint devices
+ *
+ * Copyright (C) 2022 Linaro Ltd.
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+#include <linux/mhi_ep.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pci-epc.h>
+#include <linux/pci-epf.h>
+
+#define MHI_VERSION_1_0 0x01000000
+
+struct pci_epf_mhi_ep_info {
+	const struct mhi_ep_cntrl_config *config;
+	struct pci_epf_header *epf_header;
+	enum pci_barno bar_num;
+	u32 epf_flags;
+	u32 msi_count;
+	u32 mru;
+};
+
+#define MHI_EP_CHANNEL_CONFIG_UL(ch_num, ch_name)	\
+	{						\
+		.num = ch_num,				\
+		.name = ch_name,			\
+		.dir = DMA_TO_DEVICE,			\
+	}
+
+#define MHI_EP_CHANNEL_CONFIG_DL(ch_num, ch_name)	\
+	{						\
+		.num = ch_num,				\
+		.name = ch_name,			\
+		.dir = DMA_FROM_DEVICE,			\
+	}
+
+static const struct mhi_ep_channel_config mhi_v1_channels[] = {
+	MHI_EP_CHANNEL_CONFIG_UL(0, "LOOPBACK"),
+	MHI_EP_CHANNEL_CONFIG_DL(1, "LOOPBACK"),
+	MHI_EP_CHANNEL_CONFIG_UL(2, "SAHARA"),
+	MHI_EP_CHANNEL_CONFIG_DL(3, "SAHARA"),
+	MHI_EP_CHANNEL_CONFIG_UL(4, "DIAG"),
+	MHI_EP_CHANNEL_CONFIG_DL(5, "DIAG"),
+	MHI_EP_CHANNEL_CONFIG_UL(6, "SSR"),
+	MHI_EP_CHANNEL_CONFIG_DL(7, "SSR"),
+	MHI_EP_CHANNEL_CONFIG_UL(8, "QDSS"),
+	MHI_EP_CHANNEL_CONFIG_DL(9, "QDSS"),
+	MHI_EP_CHANNEL_CONFIG_UL(10, "EFS"),
+	MHI_EP_CHANNEL_CONFIG_DL(11, "EFS"),
+	MHI_EP_CHANNEL_CONFIG_UL(12, "MBIM"),
+	MHI_EP_CHANNEL_CONFIG_DL(13, "MBIM"),
+	MHI_EP_CHANNEL_CONFIG_UL(14, "QMI"),
+	MHI_EP_CHANNEL_CONFIG_DL(15, "QMI"),
+	MHI_EP_CHANNEL_CONFIG_UL(16, "QMI"),
+	MHI_EP_CHANNEL_CONFIG_DL(17, "QMI"),
+	MHI_EP_CHANNEL_CONFIG_UL(18, "IP-CTRL-1"),
+	MHI_EP_CHANNEL_CONFIG_DL(19, "IP-CTRL-1"),
+	MHI_EP_CHANNEL_CONFIG_UL(20, "IPCR"),
+	MHI_EP_CHANNEL_CONFIG_DL(21, "IPCR"),
+	MHI_EP_CHANNEL_CONFIG_UL(32, "DUN"),
+	MHI_EP_CHANNEL_CONFIG_DL(33, "DUN"),
+	MHI_EP_CHANNEL_CONFIG_UL(36, "IP_SW0"),
+	MHI_EP_CHANNEL_CONFIG_DL(37, "IP_SW0"),
+};
+
+static const struct mhi_ep_cntrl_config mhi_v1_config = {
+	.max_channels = 128,
+	.num_channels = ARRAY_SIZE(mhi_v1_channels),
+	.ch_cfg = mhi_v1_channels,
+	.mhi_version = MHI_VERSION_1_0,
+};
+
+static struct pci_epf_header sdx55_header = {
+	.vendorid = PCI_VENDOR_ID_QCOM,
+	.deviceid = 0x0306,
+	.baseclass_code = PCI_BASE_CLASS_COMMUNICATION,
+	.subclass_code = PCI_CLASS_COMMUNICATION_MODEM & 0xff,
+	.interrupt_pin	= PCI_INTERRUPT_INTA,
+};
+
+static const struct pci_epf_mhi_ep_info sdx55_info = {
+	.config = &mhi_v1_config,
+	.epf_header = &sdx55_header,
+	.bar_num = BAR_0,
+	.epf_flags = PCI_BASE_ADDRESS_MEM_TYPE_32,
+	.msi_count = 32,
+	.mru = 0x8000,
+};
+
+struct pci_epf_mhi {
+	const struct pci_epf_mhi_ep_info *info;
+	struct mhi_ep_cntrl mhi_cntrl;
+	struct pci_epf *epf;
+	struct mutex lock;
+	void __iomem *mmio;
+	resource_size_t mmio_phys;
+	u32 mmio_size;
+	int irq;
+	bool mhi_registered;
+};
+
+static int pci_epf_mhi_alloc_map(struct mhi_ep_cntrl *mhi_cntrl, u64 pci_addr,
+				 phys_addr_t *phys_ptr, void __iomem **virt, size_t size)
+{
+	struct pci_epf_mhi *epf_mhi = container_of(mhi_cntrl, struct pci_epf_mhi, mhi_cntrl);
+	struct pci_epf *epf = epf_mhi->epf;
+	struct pci_epc *epc = epf_mhi->epf->epc;
+	size_t offset = pci_addr & (epc->mem->window.page_size - 1);
+	void __iomem *virt_addr;
+	phys_addr_t phys_addr;
+	int ret;
+
+	virt_addr = pci_epc_mem_alloc_addr(epc, &phys_addr, size + offset);
+	if (!virt_addr)
+		return -ENOMEM;
+
+	ret = pci_epc_map_addr(epc, epf->func_no, epf->vfunc_no, phys_addr, pci_addr - offset,
+			       size + offset);
+	if (ret) {
+		pci_epc_mem_free_addr(epc, phys_addr, virt_addr, size + offset);
+
+		return ret;
+	}
+
+	*phys_ptr = phys_addr + offset;
+	*virt = virt_addr + offset;
+
+	return 0;
+}
+
+static void pci_epf_mhi_unmap_free(struct mhi_ep_cntrl *mhi_cntrl, u64 pci_addr,
+				   phys_addr_t phys_addr, void __iomem *virt_addr, size_t size)
+{
+	struct pci_epf_mhi *epf_mhi = container_of(mhi_cntrl, struct pci_epf_mhi, mhi_cntrl);
+	struct pci_epf *epf = epf_mhi->epf;
+	struct pci_epc *epc = epf->epc;
+	size_t offset = pci_addr & (epc->mem->window.page_size - 1);
+
+	pci_epc_unmap_addr(epc, epf->func_no, epf->vfunc_no, phys_addr - offset);
+	pci_epc_mem_free_addr(epc, phys_addr - offset, virt_addr - offset, size + offset);
+}
+
+static void pci_epf_mhi_raise_irq(struct mhi_ep_cntrl *mhi_cntrl, u32 vector)
+{
+	struct pci_epf_mhi *epf_mhi = container_of(mhi_cntrl, struct pci_epf_mhi, mhi_cntrl);
+	struct pci_epf *epf = epf_mhi->epf;
+	struct pci_epc *epc = epf->epc;
+
+	/*
+	 * Vector is incremented by 1 here as the DWC core will decrement it before
+	 * writing to iATU.
+	 */
+	pci_epc_raise_irq(epc, epf->func_no, epf->vfunc_no, PCI_EPC_IRQ_MSI, vector + 1);
+}
+
+static int pci_epf_mhi_read_from_host(struct mhi_ep_cntrl *mhi_cntrl, u64 from, void __iomem *to,
+			       size_t size)
+{
+	struct pci_epf_mhi *epf_mhi = container_of(mhi_cntrl, struct pci_epf_mhi, mhi_cntrl);
+	struct pci_epf *epf = epf_mhi->epf;
+	struct pci_epc *epc = epf_mhi->epf->epc;
+	void __iomem *tre_buf;
+	phys_addr_t tre_phys;
+	size_t offset = from % 0x1000;
+	int ret;
+
+	mutex_lock(&epf_mhi->lock);
+
+	tre_buf = pci_epc_mem_alloc_addr(epc, &tre_phys, size + offset);
+	if (!tre_buf) {
+		mutex_unlock(&epf_mhi->lock);
+		return -ENOMEM;
+	}
+
+	ret = pci_epc_map_addr(epc, epf->func_no, epf->vfunc_no, tre_phys, from - offset,
+			       size + offset);
+	if (ret) {
+		pci_epc_mem_free_addr(epc, tre_phys, tre_buf, size + offset);
+		mutex_unlock(&epf_mhi->lock);
+		return ret;
+	}
+
+	memcpy_fromio(to, tre_buf + offset, size);
+
+	pci_epc_unmap_addr(epc, epf->func_no, epf->vfunc_no, tre_phys);
+	pci_epc_mem_free_addr(epc, tre_phys, tre_buf, size + offset);
+
+	mutex_unlock(&epf_mhi->lock);
+
+	return 0;
+}
+
+static int pci_epf_mhi_write_to_host(struct mhi_ep_cntrl *mhi_cntrl, void __iomem *from, u64 to,
+			      size_t size)
+{
+	struct pci_epf_mhi *epf_mhi = container_of(mhi_cntrl, struct pci_epf_mhi, mhi_cntrl);
+	struct pci_epf *epf = epf_mhi->epf;
+	struct pci_epc *epc = epf_mhi->epf->epc;
+	void __iomem *tre_buf;
+	phys_addr_t tre_phys;
+	size_t offset = to % 0x1000;
+	int ret;
+
+	mutex_lock(&epf_mhi->lock);
+
+	tre_buf = pci_epc_mem_alloc_addr(epc, &tre_phys, size + offset);
+	if (!tre_buf) {
+		mutex_unlock(&epf_mhi->lock);
+		return -ENOMEM;
+	}
+
+	ret = pci_epc_map_addr(epc, epf->func_no, epf->vfunc_no, tre_phys, to - offset,
+			       size + offset);
+	if (ret) {
+		pci_epc_mem_free_addr(epc, tre_phys, tre_buf, size + offset);
+		mutex_unlock(&epf_mhi->lock);
+		return ret;
+	}
+
+	memcpy_toio(tre_buf + offset, from, size);
+
+	pci_epc_unmap_addr(epc, epf->func_no, epf->vfunc_no, tre_phys);
+	pci_epc_mem_free_addr(epc, tre_phys, tre_buf, size + offset);
+
+	mutex_unlock(&epf_mhi->lock);
+
+	return 0;
+}
+
+static int pci_epf_mhi_core_init(struct pci_epf *epf)
+{
+	struct pci_epf_mhi *epf_mhi = epf_get_drvdata(epf);
+	const struct pci_epf_mhi_ep_info *info = epf_mhi->info;
+	struct pci_epf_bar *epf_bar = &epf->bar[info->bar_num];
+	struct pci_epc *epc = epf->epc;
+	struct device *dev = &epf->dev;
+	int ret;
+
+	epf_bar->phys_addr = epf_mhi->mmio_phys;
+	epf_bar->size = epf_mhi->mmio_size;
+	epf_bar->barno = info->bar_num;
+	epf_bar->flags = info->epf_flags;
+	ret = pci_epc_set_bar(epc, epf->func_no, epf->vfunc_no, epf_bar);
+	if (ret) {
+		dev_err(dev, "Failed to set BAR: %d\n", ret);
+		return ret;
+	}
+
+	ret = pci_epc_set_msi(epc, epf->func_no, epf->vfunc_no,
+			      order_base_2(info->msi_count));
+	if (ret) {
+		dev_err(dev, "Failed to set MSI configuration: %d\n", ret);
+		return ret;
+	}
+
+	ret = pci_epc_write_header(epc, epf->func_no, epf->vfunc_no, epf->header);
+	if (ret) {
+		dev_err(dev, "Failed to set Configuration header: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int pci_epf_mhi_link_up(struct pci_epf *epf)
+{
+	struct pci_epf_mhi *epf_mhi = epf_get_drvdata(epf);
+	const struct pci_epf_mhi_ep_info *info = epf_mhi->info;
+	struct mhi_ep_cntrl *mhi_cntrl = &epf_mhi->mhi_cntrl;
+	struct pci_epc *epc = epf->epc;
+	struct device *dev = &epf->dev;
+	int ret;
+
+	mhi_cntrl->mmio = epf_mhi->mmio;
+	mhi_cntrl->irq = epf_mhi->irq;
+	mhi_cntrl->mru = info->mru;
+
+	/* Assign the struct dev of PCI EP as MHI controller device */
+	mhi_cntrl->cntrl_dev = epc->dev.parent;
+	mhi_cntrl->raise_irq = pci_epf_mhi_raise_irq;
+	mhi_cntrl->alloc_map = pci_epf_mhi_alloc_map;
+	mhi_cntrl->unmap_free = pci_epf_mhi_unmap_free;
+	mhi_cntrl->read_from_host = pci_epf_mhi_read_from_host;
+	mhi_cntrl->write_to_host = pci_epf_mhi_write_to_host;
+
+	/* Register the MHI EP controller */
+	ret = mhi_ep_register_controller(mhi_cntrl, info->config);
+	if (ret) {
+		dev_err(dev, "Failed to register MHI EP controller: %d\n", ret);
+		return ret;
+	}
+
+	epf_mhi->mhi_registered = true;
+
+	return 0;
+}
+
+static int pci_epf_mhi_link_down(struct pci_epf *epf)
+{
+	struct pci_epf_mhi *epf_mhi = epf_get_drvdata(epf);
+	struct mhi_ep_cntrl *mhi_cntrl = &epf_mhi->mhi_cntrl;
+
+	if (epf_mhi->mhi_registered) {
+		mhi_ep_power_down(mhi_cntrl);
+		mhi_ep_unregister_controller(mhi_cntrl);
+		epf_mhi->mhi_registered = false;
+	}
+
+	return 0;
+}
+
+static int pci_epf_mhi_bme(struct pci_epf *epf)
+{
+	struct pci_epf_mhi *epf_mhi = epf_get_drvdata(epf);
+	struct mhi_ep_cntrl *mhi_cntrl = &epf_mhi->mhi_cntrl;
+	struct device *dev = &epf->dev;
+	int ret;
+
+	/* Power up the MHI EP stack if link is up and stack is in power down state */
+	if (!mhi_cntrl->enabled && epf_mhi->mhi_registered) {
+		ret = mhi_ep_power_up(mhi_cntrl);
+		if (ret) {
+			dev_err(dev, "Failed to power up MHI EP: %d\n", ret);
+			mhi_ep_unregister_controller(mhi_cntrl);
+			epf_mhi->mhi_registered = false;
+		}
+	}
+
+	return 0;
+}
+
+static int pci_epf_mhi_bind(struct pci_epf *epf)
+{
+	struct pci_epf_mhi *epf_mhi = epf_get_drvdata(epf);
+	struct pci_epc *epc = epf->epc;
+	struct platform_device *pdev = to_platform_device(epc->dev.parent);
+	struct device *dev = &epf->dev;
+	struct resource *res;
+	int ret;
+
+	if (WARN_ON_ONCE(!epc))
+		return -EINVAL;
+
+	/* Get MMIO base address from Endpoint controller */
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mmio");
+	epf_mhi->mmio_phys = res->start;
+	epf_mhi->mmio_size = resource_size(res);
+
+	epf_mhi->mmio = ioremap_wc(epf_mhi->mmio_phys, epf_mhi->mmio_size);
+	if (IS_ERR(epf_mhi->mmio))
+		return PTR_ERR(epf_mhi->mmio);
+
+	ret = platform_get_irq_byname(pdev, "doorbell");
+	if (ret < 0) {
+		dev_err(dev, "Failed to get Doorbell IRQ\n");
+		iounmap(epf_mhi->mmio);
+		return ret;
+	}
+
+	epf_mhi->irq = ret;
+
+	return 0;
+}
+
+static void pci_epf_mhi_unbind(struct pci_epf *epf)
+{
+	struct pci_epf_mhi *epf_mhi = epf_get_drvdata(epf);
+	const struct pci_epf_mhi_ep_info *info = epf_mhi->info;
+	struct pci_epf_bar *epf_bar = &epf->bar[info->bar_num];
+	struct mhi_ep_cntrl *mhi_cntrl = &epf_mhi->mhi_cntrl;
+	struct pci_epc *epc = epf->epc;
+
+	/*
+	 * Forcefully power down the MHI EP stack. Only way to bring the MHI EP stack
+	 * back to working state after successive bind is by getting BME from host.
+	 */
+	if (epf_mhi->mhi_registered) {
+		mhi_ep_power_down(mhi_cntrl);
+		mhi_ep_unregister_controller(mhi_cntrl);
+		epf_mhi->mhi_registered = false;
+	}
+
+	iounmap(epf_mhi->mmio);
+	pci_epc_clear_bar(epc, epf->func_no, epf->vfunc_no, epf_bar);
+}
+
+static struct pci_epc_event_ops pci_epf_mhi_event_ops = {
+	.core_init = pci_epf_mhi_core_init,
+	.link_up = pci_epf_mhi_link_up,
+	.link_down = pci_epf_mhi_link_down,
+	.bme = pci_epf_mhi_bme,
+};
+
+static int pci_epf_mhi_probe(struct pci_epf *epf, const struct pci_epf_device_id *id)
+{
+	struct pci_epf_mhi_ep_info *info = (struct pci_epf_mhi_ep_info *) id->driver_data;
+	struct pci_epf_mhi *epf_mhi;
+	struct device *dev = &epf->dev;
+
+	epf_mhi = devm_kzalloc(dev, sizeof(*epf_mhi), GFP_KERNEL);
+	if (!epf_mhi)
+		return -ENOMEM;
+
+	epf->header = info->epf_header;
+	epf_mhi->info = info;
+	epf_mhi->epf = epf;
+
+	epf->event_ops = &pci_epf_mhi_event_ops;
+
+	mutex_init(&epf_mhi->lock);
+
+	epf_set_drvdata(epf, epf_mhi);
+
+	return 0;
+}
+
+static const struct pci_epf_device_id pci_epf_mhi_ids[] = {
+	{
+		.name = "sdx55", .driver_data = (kernel_ulong_t) &sdx55_info,
+	},
+	{},
+};
+
+static struct pci_epf_ops pci_epf_mhi_ops = {
+	.unbind	= pci_epf_mhi_unbind,
+	.bind	= pci_epf_mhi_bind,
+};
+
+static struct pci_epf_driver pci_epf_mhi_driver = {
+	.driver.name	= "pci_epf_mhi",
+	.probe		= pci_epf_mhi_probe,
+	.id_table	= pci_epf_mhi_ids,
+	.ops		= &pci_epf_mhi_ops,
+	.owner		= THIS_MODULE,
+};
+
+static int __init pci_epf_mhi_init(void)
+{
+	return pci_epf_register_driver(&pci_epf_mhi_driver);
+}
+module_init(pci_epf_mhi_init);
+
+static void __exit pci_epf_mhi_exit(void)
+{
+	pci_epf_unregister_driver(&pci_epf_mhi_driver);
+}
+module_exit(pci_epf_mhi_exit);
+
+MODULE_DESCRIPTION("PCI EPF driver for MHI Endpoint devices");
+MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
+MODULE_LICENSE("GPL");