usb: Use of_property_read_bool() for boolean properties

Message ID 20230310144729.1545857-1-robh@kernel.org
State New
Headers
Series usb: Use of_property_read_bool() for boolean properties |

Commit Message

Rob Herring March 10, 2023, 2:47 p.m. UTC
  It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().

Signed-off-by: Rob Herring <robh@kernel.org>
---
 drivers/usb/chipidea/ci_hdrc_imx.c |  6 +++---
 drivers/usb/chipidea/core.c        |  2 +-
 drivers/usb/dwc2/params.c          |  3 +--
 drivers/usb/host/ehci-ppc-of.c     |  6 +++---
 drivers/usb/host/fsl-mph-dr-of.c   |  7 ++-----
 drivers/usb/misc/usb251xb.c        | 33 ++++++++++++++----------------
 6 files changed, 25 insertions(+), 32 deletions(-)
  

Comments

Richard Leitner March 13, 2023, 7:40 a.m. UTC | #1
On Fri, Mar 10, 2023 at 08:47:28AM -0600, Rob Herring wrote:
> It is preferred to use typed property access functions (i.e.
> of_property_read_<type> functions) rather than low-level
> of_get_property/of_find_property functions for reading properties.
> Convert reading boolean properties to to of_property_read_bool().
> 
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
>  drivers/usb/chipidea/ci_hdrc_imx.c |  6 +++---
>  drivers/usb/chipidea/core.c        |  2 +-
>  drivers/usb/dwc2/params.c          |  3 +--
>  drivers/usb/host/ehci-ppc-of.c     |  6 +++---
>  drivers/usb/host/fsl-mph-dr-of.c   |  7 ++-----
>  drivers/usb/misc/usb251xb.c        | 33 ++++++++++++++----------------
>  6 files changed, 25 insertions(+), 32 deletions(-)

Thanks for the patch. Please feel free to add

Reviewed-by: Richard Leitner <richard.leitner@skidata.com>

for the usb251xb changes.

regards;rl
  

Patch

diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 2eeccf4ec9d6..2855ac303001 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -152,12 +152,12 @@  static struct imx_usbmisc_data *usbmisc_get_init_data(struct device *dev)
 	 * Check the various over current related properties. If over current
 	 * detection is disabled we're not interested in the polarity.
 	 */
-	if (of_find_property(np, "disable-over-current", NULL)) {
+	if (of_property_read_bool(np, "disable-over-current")) {
 		data->disable_oc = 1;
-	} else if (of_find_property(np, "over-current-active-high", NULL)) {
+	} else if (of_property_read_bool(np, "over-current-active-high")) {
 		data->oc_pol_active_low = 0;
 		data->oc_pol_configured = 1;
-	} else if (of_find_property(np, "over-current-active-low", NULL)) {
+	} else if (of_property_read_bool(np, "over-current-active-low")) {
 		data->oc_pol_active_low = 1;
 		data->oc_pol_configured = 1;
 	} else {
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 27c601296130..7ccb223ed53c 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -753,7 +753,7 @@  static int ci_get_platdata(struct device *dev,
 		return ret;
 	}
 
-	if (of_find_property(dev->of_node, "non-zero-ttctrl-ttha", NULL))
+	if (of_property_read_bool(dev->of_node, "non-zero-ttctrl-ttha"))
 		platdata->flags |= CI_HDRC_SET_NON_ZERO_TTHA;
 
 	ext_id = ERR_PTR(-ENODEV);
diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
index 9ed9fd956940..21d16533bd2f 100644
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -508,8 +508,7 @@  static void dwc2_get_device_properties(struct dwc2_hsotg *hsotg)
 		of_usb_update_otg_caps(hsotg->dev->of_node, &p->otg_caps);
 	}
 
-	if (of_find_property(hsotg->dev->of_node, "disable-over-current", NULL))
-		p->oc_disable = true;
+	p->oc_disable = of_property_read_bool(hsotg->dev->of_node, "disable-over-current");
 }
 
 static void dwc2_check_param_otg_cap(struct dwc2_hsotg *hsotg)
diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c
index 62a0a193798c..b3aa464e9d2c 100644
--- a/drivers/usb/host/ehci-ppc-of.c
+++ b/drivers/usb/host/ehci-ppc-of.c
@@ -151,13 +151,13 @@  static int ehci_hcd_ppc_of_probe(struct platform_device *op)
 		of_node_put(np);
 	}
 
-	if (of_get_property(dn, "big-endian", NULL)) {
+	if (of_property_read_bool(dn, "big-endian")) {
 		ehci->big_endian_mmio = 1;
 		ehci->big_endian_desc = 1;
 	}
-	if (of_get_property(dn, "big-endian-regs", NULL))
+	if (of_property_read_bool(dn, "big-endian-regs"))
 		ehci->big_endian_mmio = 1;
-	if (of_get_property(dn, "big-endian-desc", NULL))
+	if (of_property_read_bool(dn, "big-endian-desc"))
 		ehci->big_endian_desc = 1;
 
 	ehci->caps = hcd->regs;
diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c
index cdf71b716c2b..9db909d12354 100644
--- a/drivers/usb/host/fsl-mph-dr-of.c
+++ b/drivers/usb/host/fsl-mph-dr-of.c
@@ -208,11 +208,8 @@  static int fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev)
 
 		pdata->operating_mode = FSL_USB2_MPH_HOST;
 	} else {
-		if (of_get_property(np, "fsl,invert-drvvbus", NULL))
-			pdata->invert_drvvbus = 1;
-
-		if (of_get_property(np, "fsl,invert-pwr-fault", NULL))
-			pdata->invert_pwr_fault = 1;
+		pdata->invert_drvvbus = of_property_read_bool(np, "fsl,invert-drvvbus");
+		pdata->invert_pwr_fault = of_property_read_bool(np, "fsl,invert-pwr-fault");
 
 		/* setup mode selected in the device tree */
 		pdata->operating_mode = dev_data->op_mode;
diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index e3abe67a155d..96f25c1ec113 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -410,10 +410,7 @@  static int usb251xb_get_ofdata(struct usb251xb *hub,
 		return -ENODEV;
 	}
 
-	if (of_get_property(np, "skip-config", NULL))
-		hub->skip_config = 1;
-	else
-		hub->skip_config = 0;
+	hub->skip_config = of_property_read_bool(np, "skip-config");
 
 	hub->gpio_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(hub->gpio_reset))
@@ -431,40 +428,40 @@  static int usb251xb_get_ofdata(struct usb251xb *hub,
 		hub->device_id = USB251XB_DEF_DEVICE_ID;
 
 	hub->conf_data1 = USB251XB_DEF_CONFIG_DATA_1;
-	if (of_get_property(np, "self-powered", NULL)) {
+	if (of_property_read_bool(np, "self-powered")) {
 		hub->conf_data1 |= BIT(7);
 
 		/* Configure Over-Current sens when self-powered */
 		hub->conf_data1 &= ~BIT(2);
-		if (of_get_property(np, "ganged-sensing", NULL))
+		if (of_property_read_bool(np, "ganged-sensing"))
 			hub->conf_data1 &= ~BIT(1);
-		else if (of_get_property(np, "individual-sensing", NULL))
+		else if (of_property_read_bool(np, "individual-sensing"))
 			hub->conf_data1 |= BIT(1);
-	} else if (of_get_property(np, "bus-powered", NULL)) {
+	} else if (of_property_read_bool(np, "bus-powered")) {
 		hub->conf_data1 &= ~BIT(7);
 
 		/* Disable Over-Current sense when bus-powered */
 		hub->conf_data1 |= BIT(2);
 	}
 
-	if (of_get_property(np, "disable-hi-speed", NULL))
+	if (of_property_read_bool(np, "disable-hi-speed"))
 		hub->conf_data1 |= BIT(5);
 
-	if (of_get_property(np, "multi-tt", NULL))
+	if (of_property_read_bool(np, "multi-tt"))
 		hub->conf_data1 |= BIT(4);
-	else if (of_get_property(np, "single-tt", NULL))
+	else if (of_property_read_bool(np, "single-tt"))
 		hub->conf_data1 &= ~BIT(4);
 
-	if (of_get_property(np, "disable-eop", NULL))
+	if (of_property_read_bool(np, "disable-eop"))
 		hub->conf_data1 |= BIT(3);
 
-	if (of_get_property(np, "individual-port-switching", NULL))
+	if (of_property_read_bool(np, "individual-port-switching"))
 		hub->conf_data1 |= BIT(0);
-	else if (of_get_property(np, "ganged-port-switching", NULL))
+	else if (of_property_read_bool(np, "ganged-port-switching"))
 		hub->conf_data1 &= ~BIT(0);
 
 	hub->conf_data2 = USB251XB_DEF_CONFIG_DATA_2;
-	if (of_get_property(np, "dynamic-power-switching", NULL))
+	if (of_property_read_bool(np, "dynamic-power-switching"))
 		hub->conf_data2 |= BIT(7);
 
 	if (!of_property_read_u32(np, "oc-delay-us", &property_u32)) {
@@ -487,17 +484,17 @@  static int usb251xb_get_ofdata(struct usb251xb *hub,
 		}
 	}
 
-	if (of_get_property(np, "compound-device", NULL))
+	if (of_property_read_bool(np, "compound-device"))
 		hub->conf_data2 |= BIT(3);
 
 	hub->conf_data3 = USB251XB_DEF_CONFIG_DATA_3;
-	if (of_get_property(np, "port-mapping-mode", NULL))
+	if (of_property_read_bool(np, "port-mapping-mode"))
 		hub->conf_data3 |= BIT(3);
 
 	if (data->led_support && of_get_property(np, "led-usb-mode", NULL))
 		hub->conf_data3 &= ~BIT(1);
 
-	if (of_get_property(np, "string-support", NULL))
+	if (of_property_read_bool(np, "string-support"))
 		hub->conf_data3 |= BIT(0);
 
 	hub->non_rem_dev = USB251XB_DEF_NON_REMOVABLE_DEVICES;