diff mbox series

[net-next,v2,10/14] dt-bindings: net: dsa: qca8k: add LEDs definition example

Message ID 20230309223524.23364-11-ansuelsmth@gmail.com
State New
Headers
Series net: Add basic LED support for switch/phy |

Commit Message

Christian Marangi March 9, 2023, 10:35 p.m. UTC 
  Add LEDs definition example for qca8k Switch Family to describe how they
should be defined for a correct usage.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 .../devicetree/bindings/net/dsa/qca8k.yaml    | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
index 389892592aac..866b3cc73216 100644
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
@@ -18,6 +18,8 @@  description:
   PHY it is connected to. In this config, an internal mdio-bus is registered and
   the MDIO master is used for communication. Mixed external and internal
   mdio-bus configurations are not supported by the hardware.
+  Each phy have at least 3 LEDs connected and can be declared
+  using the standard LEDs structure.
 
 properties:
   compatible:
@@ -117,6 +119,7 @@  unevaluatedProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
 
     mdio {
         #address-cells = <1>;
@@ -226,6 +229,27 @@  examples:
                     label = "lan1";
                     phy-mode = "internal";
                     phy-handle = <&internal_phy_port1>;
+
+                    leds {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        led@0 {
+                            reg = <0>;
+                            color = <LED_COLOR_ID_WHITE>;
+                            function = LED_FUNCTION_LAN;
+                            function-enumerator = <1>;
+                            default-state = "keep";
+                        };
+
+                        led@1 {
+                            reg = <1>;
+                            color = <LED_COLOR_ID_AMBER>;
+                            function = LED_FUNCTION_LAN;
+                            function-enumerator = <1>;
+                            default-state = "keep";
+                        };
+                    };
                 };
 
                 port@2 {