From: Philippe Schenker <philippe.schenker@toradex.com>
The pads USDHC1_RESET_B and MCLK_IN1 need a pull-down instead of
pull-disabled. Correct this.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---
arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
@@ -304,7 +304,7 @@ pinctrl_lcdif: lcdifgrp {
<IMX8QXP_ESAI0_TX4_RX1_ADMA_LCDIF_D08 0x60>, /* SODIMM 62 */
<IMX8QXP_ESAI0_TX5_RX0_ADMA_LCDIF_D09 0x60>, /* SODIMM 48 */
<IMX8QXP_MCLK_IN0_ADMA_LCDIF_VSYNC 0x60>, /* SODIMM 82 */
- <IMX8QXP_MCLK_IN1_ADMA_LCDIF_EN 0x60>, /* SODIMM 44 */
+ <IMX8QXP_MCLK_IN1_ADMA_LCDIF_EN 0x40>, /* SODIMM 44 */
<IMX8QXP_MCLK_OUT0_ADMA_LCDIF_CLK 0x60>, /* SODIMM 56 */
<IMX8QXP_SPDIF0_EXT_CLK_ADMA_LCDIF_D12 0x60>, /* SODIMM 52 */
<IMX8QXP_SPDIF0_RX_ADMA_LCDIF_D10 0x60>, /* SODIMM 74 */
@@ -315,7 +315,7 @@ pinctrl_lcdif: lcdifgrp {
<IMX8QXP_SPI3_SDI_ADMA_LCDIF_D15 0x60>, /* SODIMM 64 */
<IMX8QXP_SPI3_SDO_ADMA_LCDIF_D14 0x60>, /* SODIMM 66 */
<IMX8QXP_UART1_CTS_B_ADMA_LCDIF_D17 0x60>, /* SODIMM 61 */
- <IMX8QXP_USDHC1_RESET_B_LSIO_GPIO4_IO19 0x60>, /* SODIMM 44 */
+ <IMX8QXP_USDHC1_RESET_B_LSIO_GPIO4_IO19 0x40>, /* SODIMM 44 */
<IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21 0x60>; /* SODIMM 76 */
};