diff mbox series

[v3,13/13] PCI: qcom: Add support for SDX55 SoC

Message ID 20230308082424.140224-14-manivannan.sadhasivam@linaro.org
State New
Headers
Series Add PCIe RC support to Qcom SDX55 SoC |

Commit Message

Manivannan Sadhasivam March 8, 2023, 8:24 a.m. UTC 
  Add support for SDX55 SoC reusing the 1.9.0 config. The PCIe controller is
of version 1.10.0 but it is compatible with the 1.9.0 config. This SoC also
requires "sleep" clock which is added as an optional clock in the driver,
since it is not required on other SoCs.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index a232b04af048..17dd26cbfd61 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -182,7 +182,7 @@  struct qcom_pcie_resources_2_3_3 {
 
 /* 6 clocks typically, 7 for sm8250 */
 struct qcom_pcie_resources_2_7_0 {
-	struct clk_bulk_data clks[12];
+	struct clk_bulk_data clks[13];
 	int num_clks;
 	struct regulator_bulk_data supplies[2];
 	struct reset_control *pci_reset;
@@ -1208,6 +1208,7 @@  static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
 	res->clks[idx++].id = "noc_aggr_4";
 	res->clks[idx++].id = "noc_aggr_south_sf";
 	res->clks[idx++].id = "cnoc_qx";
+	res->clks[idx++].id = "sleep";
 
 	num_opt_clks = idx - num_clks;
 	res->num_clks = idx;
@@ -1836,6 +1837,7 @@  static const struct of_device_id qcom_pcie_match[] = {
 	{ .compatible = "qcom,pcie-sc8180x", .data = &cfg_1_9_0 },
 	{ .compatible = "qcom,pcie-sc8280xp", .data = &cfg_1_9_0 },
 	{ .compatible = "qcom,pcie-sdm845", .data = &cfg_2_7_0 },
+	{ .compatible = "qcom,pcie-sdx55", .data = &cfg_1_9_0 },
 	{ .compatible = "qcom,pcie-sm8150", .data = &cfg_1_9_0 },
 	{ .compatible = "qcom,pcie-sm8250", .data = &cfg_1_9_0 },
 	{ .compatible = "qcom,pcie-sm8350", .data = &cfg_1_9_0 },