Move ppc6_deselect to bpck6.c and rename it to bpck6_deselect
Signed-off-by: Ondrej Zary <linux@zary.sk>
---
drivers/ata/pata_parport/bpck6.c | 19 +++++++++++++++++--
drivers/ata/pata_parport/ppc6lnx.c | 19 -------------------
2 files changed, 17 insertions(+), 21 deletions(-)
@@ -235,6 +235,21 @@ static int bpck6_open(struct pi_adapter *pi)
return 0; // FAIL
}
+static void bpck6_deselect(struct pi_adapter *pi)
+{
+ if (mode_map[pi->mode] & 4) // EPP
+ parport_frob_control(pi->pardev->port, PARPORT_CONTROL_INIT,
+ PARPORT_CONTROL_INIT);
+ else // PPC/ECP
+ parport_frob_control(pi->pardev->port, PARPORT_CONTROL_SELECT,
+ PARPORT_CONTROL_SELECT);
+
+ parport_write_data(pi->pardev->port, pi->saved_r0);
+ parport_write_control(pi->pardev->port,
+ pi->saved_r2 | PARPORT_CONTROL_SELECT);
+ parport_write_control(pi->pardev->port, pi->saved_r2);
+}
+
static void bpck6_wr_extout(struct pi_adapter *pi, u8 regdata)
{
ppc6_send_cmd(pi, REG_VERSION | ACCESS_REG | ACCESS_WRITE);
@@ -253,7 +268,7 @@ static void bpck6_disconnect(struct pi_adapter *pi)
{
dev_dbg(&pi->dev, "disconnect\n");
bpck6_wr_extout(pi, 0x0);
- ppc6_deselect(pi);
+ bpck6_deselect(pi);
}
static int bpck6_test_port(struct pi_adapter *pi) /* check for 8-bit port */
@@ -285,7 +300,7 @@ static int bpck6_probe_unit(struct pi_adapter *pi)
if(out)
{
- ppc6_deselect(pi);
+ bpck6_deselect(pi);
dev_dbg(&pi->dev, "leaving probe\n");
pi->mode = saved_mode;
return(1);
@@ -67,7 +67,6 @@
//***************************************************************************
-static void ppc6_deselect(struct pi_adapter *pi);
static void ppc6_send_cmd(struct pi_adapter *pi, u8 cmd);
static void ppc6_wr_data_byte(struct pi_adapter *pi, u8 data);
static u8 ppc6_rd_data_byte(struct pi_adapter *pi);
@@ -79,24 +78,6 @@ int mode_map[] = { PPCMODE_UNI_FW, PPCMODE_BI_FW, PPCMODE_EPP_BYTE,
//***************************************************************************
-static void ppc6_deselect(struct pi_adapter *pi)
-{
- if (mode_map[pi->mode] & 4) // EPP
- parport_frob_control(pi->pardev->port,
- PARPORT_CONTROL_INIT, PARPORT_CONTROL_INIT);
- else // PPC/ECP
- parport_frob_control(pi->pardev->port,
- PARPORT_CONTROL_SELECT, PARPORT_CONTROL_SELECT);
-
- parport_write_data(pi->pardev->port, pi->saved_r0);
-
- parport_write_control(pi->pardev->port, (pi->saved_r2 | PARPORT_CONTROL_SELECT));
-
- parport_write_control(pi->pardev->port, pi->saved_r2);
-}
-
-//***************************************************************************
-
static void ppc6_send_cmd(struct pi_adapter *pi, u8 cmd)
{
switch (mode_map[pi->mode])