[v12,2/2] mfd: max597x: Add support for MAX5970 and MAX5978
Commit Message
From: Patrick Rudolph <patrick.rudolph@9elements.com>
Implement a regulator driver with IRQ support for fault management.
Written against documentation [1] and [2] and tested on real hardware.
Every channel has it's own regulator supply nammed 'vss1-supply' and
'vss2-supply'. The regulator supply is used to determine the output
voltage, as the smart switch provides no output regulation.
The driver requires the 'shunt-resistor-micro-ohms' to be present in
the devicetree to properly calculate current related values.
You must specify compatible devictree layout:
regulator@3a {
reg = <0x3a>;
vss1-supply = <&p3v3>;
compatible = "maxim,max5978";
...
regulators {
sw0_ref: SW0 {
regulator-compatible = "SW0";
shunt-resistor-micro-ohms = <12000>;
...
}
}
}
1: https://datasheets.maximintegrated.com/en/ds/MAX5970.pdf
2: https://datasheets.maximintegrated.com/en/ds/MAX5978.pdf
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
...
Changes in V12:
- Use simple_mfd_i2c driver and remove previous implementation.
- Remove newline
- Use _MFD_MAX597X_H in header file
- Successfull build need following patch from regulator:
https://lore.kernel.org/r/20230216075302.68935-1-Naresh.Solanki@9elements.com
https://lore.kernel.org/r/20230210163225.1208035-1-Naresh.Solanki@9elements.com
---
drivers/mfd/Kconfig | 10 ++++
drivers/mfd/simple-mfd-i2c.c | 13 +++++
include/linux/mfd/max597x.h | 96 ++++++++++++++++++++++++++++++++++++
3 files changed, 119 insertions(+)
create mode 100644 include/linux/mfd/max597x.h
Comments
On Tue, 07 Mar 2023, Naresh Solanki wrote:
> From: Patrick Rudolph <patrick.rudolph@9elements.com>
>
> Implement a regulator driver with IRQ support for fault management.
> Written against documentation [1] and [2] and tested on real hardware.
>
> Every channel has it's own regulator supply nammed 'vss1-supply' and
> 'vss2-supply'. The regulator supply is used to determine the output
> voltage, as the smart switch provides no output regulation.
> The driver requires the 'shunt-resistor-micro-ohms' to be present in
> the devicetree to properly calculate current related values.
>
> You must specify compatible devictree layout:
>
> regulator@3a {
> reg = <0x3a>;
> vss1-supply = <&p3v3>;
> compatible = "maxim,max5978";
>
> ...
>
> regulators {
> sw0_ref: SW0 {
> regulator-compatible = "SW0";
> shunt-resistor-micro-ohms = <12000>;
> ...
> }
> }
> }
>
> 1: https://datasheets.maximintegrated.com/en/ds/MAX5970.pdf
> 2: https://datasheets.maximintegrated.com/en/ds/MAX5978.pdf
>
> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
> ...
> Changes in V12:
> - Use simple_mfd_i2c driver and remove previous implementation.
> - Remove newline
> - Use _MFD_MAX597X_H in header file
> - Successfull build need following patch from regulator:
> https://lore.kernel.org/r/20230216075302.68935-1-Naresh.Solanki@9elements.com
> https://lore.kernel.org/r/20230210163225.1208035-1-Naresh.Solanki@9elements.com
> ---
> drivers/mfd/Kconfig | 10 ++++
> drivers/mfd/simple-mfd-i2c.c | 13 +++++
> include/linux/mfd/max597x.h | 96 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 119 insertions(+)
> create mode 100644 include/linux/mfd/max597x.h
Applied, thanks
--
Lee Jones [李琼斯]
@@ -266,6 +266,16 @@ config MFD_MADERA_SPI
Support for the Cirrus Logic Madera platform audio SoC
core functionality controlled via SPI.
+config MFD_MAX597X
+ tristate "Maxim 597x power switch and monitor"
+ depends on (I2C && OF)
+ select MFD_SIMPLE_MFD_I2C
+ help
+ This driver controls a Maxim 5970/5978 switch via I2C bus.
+ The MAX5970/5978 is a smart switch with no output regulation, but
+ fault protection and voltage and current monitoring capabilities.
+ Also it supports upto 4 indication leds.
+
config MFD_CS47L15
bool "Cirrus Logic CS47L15"
select PINCTRL_CS47L15
@@ -72,9 +72,22 @@ static const struct simple_mfd_data silergy_sy7636a = {
.mfd_cell_size = ARRAY_SIZE(sy7636a_cells),
};
+static const struct mfd_cell max597x_cells[] = {
+ { .name = "max597x-regulator", },
+ { .name = "max597x-iio", },
+ { .name = "max597x-led", },
+};
+
+static const struct simple_mfd_data maxim_max597x = {
+ .mfd_cell = max597x_cells,
+ .mfd_cell_size = ARRAY_SIZE(max597x_cells),
+};
+
static const struct of_device_id simple_mfd_i2c_of_match[] = {
{ .compatible = "kontron,sl28cpld" },
{ .compatible = "silergy,sy7636a", .data = &silergy_sy7636a},
+ { .compatible = "maxim,max5970", .data = &maxim_max597x},
+ { .compatible = "maxim,max5978", .data = &maxim_max597x},
{}
};
MODULE_DEVICE_TABLE(of, simple_mfd_i2c_of_match);
new file mode 100644
@@ -0,0 +1,96 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Device driver for regulators in MAX5970 and MAX5978 IC
+ *
+ * Copyright (c) 2022 9elements GmbH
+ *
+ * Author: Patrick Rudolph <patrick.rudolph@9elements.com>
+ */
+
+#ifndef _MFD_MAX597X_H
+#define _MFD_MAX597X_H
+
+#include <linux/regmap.h>
+
+#define MAX5970_NUM_SWITCHES 2
+#define MAX5978_NUM_SWITCHES 1
+#define MAX597X_NUM_LEDS 4
+
+struct max597x_data {
+ int num_switches;
+ u32 irng[MAX5970_NUM_SWITCHES];
+ u32 mon_rng[MAX5970_NUM_SWITCHES];
+ u32 shunt_micro_ohms[MAX5970_NUM_SWITCHES];
+};
+
+enum max597x_chip_type {
+ MAX597x_TYPE_MAX5978 = 1,
+ MAX597x_TYPE_MAX5970,
+};
+
+#define MAX5970_REG_CURRENT_L(ch) (0x01 + (ch) * 4)
+#define MAX5970_REG_CURRENT_H(ch) (0x00 + (ch) * 4)
+#define MAX5970_REG_VOLTAGE_L(ch) (0x03 + (ch) * 4)
+#define MAX5970_REG_VOLTAGE_H(ch) (0x02 + (ch) * 4)
+#define MAX5970_REG_MON_RANGE 0x18
+#define MAX5970_MON_MASK 0x3
+#define MAX5970_MON(reg, ch) (((reg) >> ((ch) * 2)) & MAX5970_MON_MASK)
+#define MAX5970_MON_MAX_RANGE_UV 16000000
+
+#define MAX5970_REG_CH_UV_WARN_H(ch) (0x1A + (ch) * 10)
+#define MAX5970_REG_CH_UV_WARN_L(ch) (0x1B + (ch) * 10)
+#define MAX5970_REG_CH_UV_CRIT_H(ch) (0x1C + (ch) * 10)
+#define MAX5970_REG_CH_UV_CRIT_L(ch) (0x1D + (ch) * 10)
+#define MAX5970_REG_CH_OV_WARN_H(ch) (0x1E + (ch) * 10)
+#define MAX5970_REG_CH_OV_WARN_L(ch) (0x1F + (ch) * 10)
+#define MAX5970_REG_CH_OV_CRIT_H(ch) (0x20 + (ch) * 10)
+#define MAX5970_REG_CH_OV_CRIT_L(ch) (0x21 + (ch) * 10)
+
+#define MAX5970_VAL2REG_H(x) (((x) >> 2) & 0xFF)
+#define MAX5970_VAL2REG_L(x) ((x) & 0x3)
+
+#define MAX5970_REG_DAC_FAST(ch) (0x2E + (ch))
+
+#define MAX5970_FAST2SLOW_RATIO 200
+
+#define MAX5970_REG_STATUS0 0x31
+#define MAX5970_CB_IFAULTF(ch) (1 << (ch))
+#define MAX5970_CB_IFAULTS(ch) (1 << ((ch) + 4))
+
+#define MAX5970_REG_STATUS1 0x32
+#define STATUS1_PROT_MASK 0x3
+#define STATUS1_PROT(reg) \
+ (((reg) >> 6) & STATUS1_PROT_MASK)
+#define STATUS1_PROT_SHUTDOWN 0
+#define STATUS1_PROT_CLEAR_PG 1
+#define STATUS1_PROT_ALERT_ONLY 2
+
+#define MAX5970_REG_STATUS2 0x33
+#define MAX5970_IRNG_MASK 0x3
+#define MAX5970_IRNG(reg, ch) \
+ (((reg) >> ((ch) * 2)) & MAX5970_IRNG_MASK)
+
+#define MAX5970_REG_STATUS3 0x34
+#define MAX5970_STATUS3_ALERT BIT(4)
+#define MAX5970_STATUS3_PG(ch) BIT(ch)
+
+#define MAX5970_REG_FAULT0 0x35
+#define UV_STATUS_WARN(ch) (1 << (ch))
+#define UV_STATUS_CRIT(ch) (1 << ((ch) + 4))
+
+#define MAX5970_REG_FAULT1 0x36
+#define OV_STATUS_WARN(ch) (1 << (ch))
+#define OV_STATUS_CRIT(ch) (1 << ((ch) + 4))
+
+#define MAX5970_REG_FAULT2 0x37
+#define OC_STATUS_WARN(ch) (1 << (ch))
+
+#define MAX5970_REG_CHXEN 0x3b
+#define CHXEN(ch) (3 << ((ch) * 2))
+
+#define MAX5970_REG_LED_FLASH 0x43
+
+#define MAX_REGISTERS 0x49
+#define ADC_MASK 0x3FF
+
+#endif /* _MFD_MAX597X_H */